upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support

Wolfgang Denk 64134f0112 Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections ... With recent toolchain versions, some boards would not build because or errors like this one (here for ocotea board when building with ELDK 4.2 beta): ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab] For many boards, the .bss section is big enough that it wraps around at the end of the address space (0xFFFFFFFF), so the problem will not be visible unless you use a 64 bit tool chain for development. On some boards however, changes to the code size (due to different optimizations) we bail out with section overlaps like above. The fix is to add the NOLOAD attribute to the .bss and .sbss sections, telling the linker that .bss does not consume any space in the image. Signed-off-by: Wolfgang Denk <wd@denx.de>		17 years ago
..
Makefile	Move "ar" flags to config.mk to allow for silent "make -s"	19 years ago
cmd_yucca.c	Add support for TB5200 board	19 years ago
config.mk	…
flash.c	Add support for TB5200 board	19 years ago
init.S	[PPC440SPe] Improve PCIe configuration space access	18 years ago
u-boot.lds	Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections	17 years ago
yucca.c	ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards	18 years ago
yucca.h	Improve DIMM detection for AMCC Yucca 440SPe board	19 years ago