upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/arm/include/asm/arch-sunxi
Dave Prue 6ff005cf19 sunxi: Fix CONFIG_SUNXI_GMAC references 7 years ago
..
boot0.h sunxi: A64: do an RMR switch if started in AArch32 mode 7 years ago
clock.h sunxi: Add support for Allwinner A64 SoCs 8 years ago
clock_sun4i.h sunxi: Add missing macros to configure the NAND controller clk 8 years ago
clock_sun6i.h sunxi: Add clock support for TV encoder 7 years ago
clock_sun8i_a83t.h mmc: sunxi: Support new mode 7 years ago
clock_sun9i.h sunxi: add initial clock setup for sun9i for SPL 8 years ago
cpu.h sunxi: Use H3/A64 DRAM initialization code for R40 7 years ago
cpu_sun4i.h sunxi: Add base address for TV encoder 7 years ago
cpu_sun9i.h sunxi: Add support for SID e-fuses on sun9i 8 years ago
cpucfg.h sunxi: Add CPUCFG debug lock and sun7i cpu power controls 8 years ago
display.h sunxi: video: Split out TVE code 7 years ago
display2.h sunxi: video: Add support for CSC and TVE to DE2 driver 7 years ago
dma.h
dma_sun4i.h
dram.h sunxi: makes an invisible option for H3-like DRAM controllers 7 years ago
dram_sun4i.h
dram_sun6i.h
dram_sun8i_a23.h
dram_sun8i_a33.h
dram_sun8i_a83t.h sunxi: Add support for LPDDR3 for A83T 8 years ago
dram_sun9i.h sunxi: DRAM initialisation for sun9i 8 years ago
dram_sunxi_dw.h sunxi: Add selective DRAM type and timing 7 years ago
gpio.h sunxi: add basic V3s support 7 years ago
gtbus.h sunxi: add gtbus-initialisation for sun9i 8 years ago
gtbus_sun9i.h sunxi: add gtbus-initialisation for sun9i 8 years ago
i2c.h sunxi: Add support for the I2C controller which is part of the PRCM 8 years ago
lcdc.h sunxi: video: Convert lcdc to use struct display_timing 7 years ago
mmc.h mmc: sunxi: Support new mode 7 years ago
p2wi.h
pmic_bus.h
prcm.h sunxi: add PRCM secure switch register definition 7 years ago
pwm.h sunxi: display: Use PWM to drive backlight where applicable 8 years ago
rsb.h
spl.h sunxi: Store the device tree name in the SPL header 7 years ago
sys_proto.h sunxi: Fix CONFIG_SUNXI_GMAC references 7 years ago
timer.h sunxi: Fix watchdog reset function for R40 7 years ago
tve.h sunxi: video: Split out TVE code 7 years ago
tzpc.h sunxi: Support Secure Memory Touch Arbiter (SMTA) in sun8i H3 8 years ago
usb_phy.h sunxi: musb: Power off OTG port VBUS when disabled 8 years ago
watchdog.h sunxi: Fix watchdog reset function for R40 7 years ago