upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
813 lines
19 KiB
813 lines
19 KiB
/*
|
|
* INCA-IP internal switch ethernet driver.
|
|
*
|
|
* (C) Copyright 2003-2004
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
|
|
#include <common.h>
|
|
|
|
#include <malloc.h>
|
|
#include <net.h>
|
|
#include <netdev.h>
|
|
#include <asm/inca-ip.h>
|
|
#include <asm/addrspace.h>
|
|
|
|
|
|
#define NUM_RX_DESC PKTBUFSRX
|
|
#define NUM_TX_DESC 3
|
|
#define TOUT_LOOP 1000000
|
|
|
|
|
|
#define DELAY udelay(10000)
|
|
/* Sometimes the store word instruction hangs while writing to one
|
|
* of the Switch registers. Moving the instruction into a separate
|
|
* function somehow makes the problem go away.
|
|
*/
|
|
static void SWORD(volatile u32 * reg, u32 value)
|
|
{
|
|
*reg = value;
|
|
}
|
|
|
|
#define DMA_WRITE_REG(reg, value) *((volatile u32 *)reg) = (u32)value;
|
|
#define DMA_READ_REG(reg, value) value = (u32)*((volatile u32*)reg)
|
|
#define SW_WRITE_REG(reg, value) \
|
|
SWORD(reg, value);\
|
|
DELAY;\
|
|
SWORD(reg, value);
|
|
|
|
#define SW_READ_REG(reg, value) \
|
|
value = (u32)*((volatile u32*)reg);\
|
|
DELAY;\
|
|
value = (u32)*((volatile u32*)reg);
|
|
|
|
#define INCA_DMA_TX_POLLING_TIME 0x07
|
|
#define INCA_DMA_RX_POLLING_TIME 0x07
|
|
|
|
#define INCA_DMA_TX_HOLD 0x80000000
|
|
#define INCA_DMA_TX_EOP 0x40000000
|
|
#define INCA_DMA_TX_SOP 0x20000000
|
|
#define INCA_DMA_TX_ICPT 0x10000000
|
|
#define INCA_DMA_TX_IEOP 0x08000000
|
|
|
|
#define INCA_DMA_RX_C 0x80000000
|
|
#define INCA_DMA_RX_SOP 0x40000000
|
|
#define INCA_DMA_RX_EOP 0x20000000
|
|
|
|
#define INCA_SWITCH_PHY_SPEED_10H 0x1
|
|
#define INCA_SWITCH_PHY_SPEED_10F 0x5
|
|
#define INCA_SWITCH_PHY_SPEED_100H 0x2
|
|
#define INCA_SWITCH_PHY_SPEED_100F 0x6
|
|
|
|
/************************ Auto MDIX settings ************************/
|
|
#define INCA_IP_AUTO_MDIX_LAN_PORTS_DIR INCA_IP_Ports_P1_DIR
|
|
#define INCA_IP_AUTO_MDIX_LAN_PORTS_ALTSEL INCA_IP_Ports_P1_ALTSEL
|
|
#define INCA_IP_AUTO_MDIX_LAN_PORTS_OUT INCA_IP_Ports_P1_OUT
|
|
#define INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX 16
|
|
|
|
#define WAIT_SIGNAL_RETRIES 100
|
|
#define WAIT_LINK_RETRIES 100
|
|
#define LINK_RETRY_DELAY 2000 /* ms */
|
|
/********************************************************************/
|
|
|
|
typedef struct
|
|
{
|
|
union {
|
|
struct {
|
|
volatile u32 HOLD :1;
|
|
volatile u32 ICpt :1;
|
|
volatile u32 IEop :1;
|
|
volatile u32 offset :3;
|
|
volatile u32 reserved0 :4;
|
|
volatile u32 NFB :22;
|
|
}field;
|
|
|
|
volatile u32 word;
|
|
}params;
|
|
|
|
volatile u32 nextRxDescPtr;
|
|
|
|
volatile u32 RxDataPtr;
|
|
|
|
union {
|
|
struct {
|
|
volatile u32 C :1;
|
|
volatile u32 Sop :1;
|
|
volatile u32 Eop :1;
|
|
volatile u32 reserved3 :12;
|
|
volatile u32 NBT :17;
|
|
}field;
|
|
|
|
volatile u32 word;
|
|
}status;
|
|
|
|
} inca_rx_descriptor_t;
|
|
|
|
|
|
typedef struct
|
|
{
|
|
union {
|
|
struct {
|
|
volatile u32 HOLD :1;
|
|
volatile u32 Eop :1;
|
|
volatile u32 Sop :1;
|
|
volatile u32 ICpt :1;
|
|
volatile u32 IEop :1;
|
|
volatile u32 reserved0 :5;
|
|
volatile u32 NBA :22;
|
|
}field;
|
|
|
|
volatile u32 word;
|
|
}params;
|
|
|
|
volatile u32 nextTxDescPtr;
|
|
|
|
volatile u32 TxDataPtr;
|
|
|
|
volatile u32 C :1;
|
|
volatile u32 reserved3 :31;
|
|
|
|
} inca_tx_descriptor_t;
|
|
|
|
|
|
static inca_rx_descriptor_t rx_ring[NUM_RX_DESC] __attribute__ ((aligned(16)));
|
|
static inca_tx_descriptor_t tx_ring[NUM_TX_DESC] __attribute__ ((aligned(16)));
|
|
|
|
static int tx_new, rx_new, tx_hold, rx_hold;
|
|
static int tx_old_hold = -1;
|
|
static int initialized = 0;
|
|
|
|
|
|
static int inca_switch_init(struct eth_device *dev, bd_t * bis);
|
|
static int inca_switch_send(struct eth_device *dev, volatile void *packet, int length);
|
|
static int inca_switch_recv(struct eth_device *dev);
|
|
static void inca_switch_halt(struct eth_device *dev);
|
|
static void inca_init_switch_chip(void);
|
|
static void inca_dma_init(void);
|
|
static int inca_amdix(void);
|
|
|
|
|
|
int inca_switch_initialize(bd_t * bis)
|
|
{
|
|
struct eth_device *dev;
|
|
|
|
#if 0
|
|
printf("Entered inca_switch_initialize()\n");
|
|
#endif
|
|
|
|
if (!(dev = (struct eth_device *) malloc (sizeof *dev))) {
|
|
printf("Failed to allocate memory\n");
|
|
return 0;
|
|
}
|
|
memset(dev, 0, sizeof(*dev));
|
|
|
|
inca_dma_init();
|
|
|
|
inca_init_switch_chip();
|
|
|
|
#if defined(CONFIG_INCA_IP_SWITCH_AMDIX)
|
|
inca_amdix();
|
|
#endif
|
|
|
|
sprintf(dev->name, "INCA-IP Switch");
|
|
dev->init = inca_switch_init;
|
|
dev->halt = inca_switch_halt;
|
|
dev->send = inca_switch_send;
|
|
dev->recv = inca_switch_recv;
|
|
|
|
eth_register(dev);
|
|
|
|
#if 0
|
|
printf("Leaving inca_switch_initialize()\n");
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int inca_switch_init(struct eth_device *dev, bd_t * bis)
|
|
{
|
|
int i;
|
|
u32 v, regValue;
|
|
u16 wTmp;
|
|
|
|
#if 0
|
|
printf("Entering inca_switch_init()\n");
|
|
#endif
|
|
|
|
/* Set MAC address.
|
|
*/
|
|
wTmp = (u16)dev->enetaddr[0];
|
|
regValue = (wTmp << 8) | dev->enetaddr[1];
|
|
|
|
SW_WRITE_REG(INCA_IP_Switch_PMAC_SA1, regValue);
|
|
|
|
wTmp = (u16)dev->enetaddr[2];
|
|
regValue = (wTmp << 8) | dev->enetaddr[3];
|
|
regValue = regValue << 16;
|
|
wTmp = (u16)dev->enetaddr[4];
|
|
regValue |= (wTmp<<8) | dev->enetaddr[5];
|
|
|
|
SW_WRITE_REG(INCA_IP_Switch_PMAC_SA2, regValue);
|
|
|
|
/* Initialize the descriptor rings.
|
|
*/
|
|
for (i = 0; i < NUM_RX_DESC; i++) {
|
|
inca_rx_descriptor_t * rx_desc = (inca_rx_descriptor_t *)CKSEG1ADDR(&rx_ring[i]);
|
|
memset(rx_desc, 0, sizeof(rx_ring[i]));
|
|
|
|
/* Set maximum size of receive buffer.
|
|
*/
|
|
rx_desc->params.field.NFB = PKTSIZE_ALIGN;
|
|
|
|
/* Set the offset of the receive buffer. Zero means
|
|
* that the offset mechanism is not used.
|
|
*/
|
|
rx_desc->params.field.offset = 0;
|
|
|
|
/* Check if it is the last descriptor.
|
|
*/
|
|
if (i == (NUM_RX_DESC - 1)) {
|
|
/* Let the last descriptor point to the first
|
|
* one.
|
|
*/
|
|
rx_desc->nextRxDescPtr = (u32)CKSEG1ADDR(rx_ring);
|
|
} else {
|
|
/* Set the address of the next descriptor.
|
|
*/
|
|
rx_desc->nextRxDescPtr = (u32)CKSEG1ADDR(&rx_ring[i+1]);
|
|
}
|
|
|
|
rx_desc->RxDataPtr = (u32)CKSEG1ADDR(NetRxPackets[i]);
|
|
}
|
|
|
|
#if 0
|
|
printf("rx_ring = 0x%08X 0x%08X\n", (u32)rx_ring, (u32)&rx_ring[0]);
|
|
printf("tx_ring = 0x%08X 0x%08X\n", (u32)tx_ring, (u32)&tx_ring[0]);
|
|
#endif
|
|
|
|
for (i = 0; i < NUM_TX_DESC; i++) {
|
|
inca_tx_descriptor_t * tx_desc = (inca_tx_descriptor_t *)CKSEG1ADDR(&tx_ring[i]);
|
|
|
|
memset(tx_desc, 0, sizeof(tx_ring[i]));
|
|
|
|
tx_desc->params.word = 0;
|
|
tx_desc->params.field.HOLD = 1;
|
|
tx_desc->C = 1;
|
|
|
|
/* Check if it is the last descriptor.
|
|
*/
|
|
if (i == (NUM_TX_DESC - 1)) {
|
|
/* Let the last descriptor point to the
|
|
* first one.
|
|
*/
|
|
tx_desc->nextTxDescPtr = (u32)CKSEG1ADDR(tx_ring);
|
|
} else {
|
|
/* Set the address of the next descriptor.
|
|
*/
|
|
tx_desc->nextTxDescPtr = (u32)CKSEG1ADDR(&tx_ring[i+1]);
|
|
}
|
|
}
|
|
|
|
/* Initialize RxDMA.
|
|
*/
|
|
DMA_READ_REG(INCA_IP_DMA_DMA_RXISR, v);
|
|
#if 0
|
|
printf("RX status = 0x%08X\n", v);
|
|
#endif
|
|
|
|
/* Writing to the FRDA of CHANNEL.
|
|
*/
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_RXFRDA0, (u32)rx_ring);
|
|
|
|
/* Writing to the COMMAND REG.
|
|
*/
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_INIT);
|
|
|
|
/* Initialize TxDMA.
|
|
*/
|
|
DMA_READ_REG(INCA_IP_DMA_DMA_TXISR, v);
|
|
#if 0
|
|
printf("TX status = 0x%08X\n", v);
|
|
#endif
|
|
|
|
/* Writing to the FRDA of CHANNEL.
|
|
*/
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_TXFRDA0, (u32)tx_ring);
|
|
|
|
tx_new = rx_new = 0;
|
|
|
|
tx_hold = NUM_TX_DESC - 1;
|
|
rx_hold = NUM_RX_DESC - 1;
|
|
|
|
#if 0
|
|
rx_ring[rx_hold].params.field.HOLD = 1;
|
|
#endif
|
|
/* enable spanning tree forwarding, enable the CPU port */
|
|
/* ST_PT:
|
|
* CPS (CPU port status) 0x3 (forwarding)
|
|
* LPS (LAN port status) 0x3 (forwarding)
|
|
* PPS (PC port status) 0x3 (forwarding)
|
|
*/
|
|
SW_WRITE_REG(INCA_IP_Switch_ST_PT,0x3f);
|
|
|
|
#if 0
|
|
printf("Leaving inca_switch_init()\n");
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int inca_switch_send(struct eth_device *dev, volatile void *packet, int length)
|
|
{
|
|
int i;
|
|
int res = -1;
|
|
u32 command;
|
|
u32 regValue;
|
|
inca_tx_descriptor_t * tx_desc = (inca_tx_descriptor_t *)CKSEG1ADDR(&tx_ring[tx_new]);
|
|
|
|
#if 0
|
|
printf("Entered inca_switch_send()\n");
|
|
#endif
|
|
|
|
if (length <= 0) {
|
|
printf ("%s: bad packet size: %d\n", dev->name, length);
|
|
goto Done;
|
|
}
|
|
|
|
for(i = 0; tx_desc->C == 0; i++) {
|
|
if (i >= TOUT_LOOP) {
|
|
printf("%s: tx error buffer not ready\n", dev->name);
|
|
goto Done;
|
|
}
|
|
}
|
|
|
|
if (tx_old_hold >= 0) {
|
|
((inca_tx_descriptor_t *)CKSEG1ADDR(&tx_ring[tx_old_hold]))->params.field.HOLD = 1;
|
|
}
|
|
tx_old_hold = tx_hold;
|
|
|
|
tx_desc->params.word =
|
|
(INCA_DMA_TX_SOP | INCA_DMA_TX_EOP | INCA_DMA_TX_HOLD);
|
|
|
|
tx_desc->C = 0;
|
|
tx_desc->TxDataPtr = (u32)packet;
|
|
tx_desc->params.field.NBA = length;
|
|
|
|
((inca_tx_descriptor_t *)CKSEG1ADDR(&tx_ring[tx_hold]))->params.field.HOLD = 0;
|
|
|
|
tx_hold = tx_new;
|
|
tx_new = (tx_new + 1) % NUM_TX_DESC;
|
|
|
|
|
|
if (! initialized) {
|
|
command = INCA_IP_DMA_DMA_TXCCR0_INIT;
|
|
initialized = 1;
|
|
} else {
|
|
command = INCA_IP_DMA_DMA_TXCCR0_HR;
|
|
}
|
|
|
|
DMA_READ_REG(INCA_IP_DMA_DMA_TXCCR0, regValue);
|
|
regValue |= command;
|
|
#if 0
|
|
printf("regValue = 0x%x\n", regValue);
|
|
#endif
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, regValue);
|
|
|
|
#if 1
|
|
for(i = 0; ((inca_tx_descriptor_t *)CKSEG1ADDR(&tx_ring[tx_hold]))->C == 0; i++) {
|
|
if (i >= TOUT_LOOP) {
|
|
printf("%s: tx buffer not ready\n", dev->name);
|
|
goto Done;
|
|
}
|
|
}
|
|
#endif
|
|
res = length;
|
|
Done:
|
|
#if 0
|
|
printf("Leaving inca_switch_send()\n");
|
|
#endif
|
|
return res;
|
|
}
|
|
|
|
|
|
static int inca_switch_recv(struct eth_device *dev)
|
|
{
|
|
int length = 0;
|
|
inca_rx_descriptor_t * rx_desc;
|
|
|
|
#if 0
|
|
printf("Entered inca_switch_recv()\n");
|
|
#endif
|
|
|
|
for (;;) {
|
|
rx_desc = (inca_rx_descriptor_t *)CKSEG1ADDR(&rx_ring[rx_new]);
|
|
|
|
if (rx_desc->status.field.C == 0) {
|
|
break;
|
|
}
|
|
|
|
#if 0
|
|
rx_ring[rx_new].params.field.HOLD = 1;
|
|
#endif
|
|
|
|
if (! rx_desc->status.field.Eop) {
|
|
printf("Partly received packet!!!\n");
|
|
break;
|
|
}
|
|
|
|
length = rx_desc->status.field.NBT;
|
|
rx_desc->status.word &=
|
|
~(INCA_DMA_RX_EOP | INCA_DMA_RX_SOP | INCA_DMA_RX_C);
|
|
#if 0
|
|
{
|
|
int i;
|
|
for (i=0;i<length - 4;i++) {
|
|
if (i % 16 == 0) printf("\n%04x: ", i);
|
|
printf("%02X ", NetRxPackets[rx_new][i]);
|
|
}
|
|
printf("\n");
|
|
}
|
|
#endif
|
|
|
|
if (length) {
|
|
#if 0
|
|
printf("Received %d bytes\n", length);
|
|
#endif
|
|
NetReceive((void*)CKSEG1ADDR(NetRxPackets[rx_new]), length - 4);
|
|
} else {
|
|
#if 1
|
|
printf("Zero length!!!\n");
|
|
#endif
|
|
}
|
|
|
|
|
|
((inca_rx_descriptor_t *)CKSEG1ADDR(&rx_ring[rx_hold]))->params.field.HOLD = 0;
|
|
|
|
rx_hold = rx_new;
|
|
|
|
rx_new = (rx_new + 1) % NUM_RX_DESC;
|
|
}
|
|
|
|
#if 0
|
|
printf("Leaving inca_switch_recv()\n");
|
|
#endif
|
|
|
|
return length;
|
|
}
|
|
|
|
|
|
static void inca_switch_halt(struct eth_device *dev)
|
|
{
|
|
#if 0
|
|
printf("Entered inca_switch_halt()\n");
|
|
#endif
|
|
|
|
#if 1
|
|
initialized = 0;
|
|
#endif
|
|
#if 1
|
|
/* Disable forwarding to the CPU port.
|
|
*/
|
|
SW_WRITE_REG(INCA_IP_Switch_ST_PT,0xf);
|
|
|
|
/* Close RxDMA channel.
|
|
*/
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);
|
|
|
|
/* Close TxDMA channel.
|
|
*/
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, INCA_IP_DMA_DMA_TXCCR0_OFF);
|
|
|
|
|
|
#endif
|
|
#if 0
|
|
printf("Leaving inca_switch_halt()\n");
|
|
#endif
|
|
}
|
|
|
|
|
|
static void inca_init_switch_chip(void)
|
|
{
|
|
u32 regValue;
|
|
|
|
/* To workaround a problem with collision counter
|
|
* (see Errata sheet).
|
|
*/
|
|
SW_WRITE_REG(INCA_IP_Switch_PC_TX_CTL, 0x00000001);
|
|
SW_WRITE_REG(INCA_IP_Switch_LAN_TX_CTL, 0x00000001);
|
|
|
|
#if 1
|
|
/* init MDIO configuration:
|
|
* MDS (Poll speed): 0x01 (4ms)
|
|
* PHY_LAN_ADDR: 0x06
|
|
* PHY_PC_ADDR: 0x05
|
|
* UEP (Use External PHY): 0x00 (Internal PHY is used)
|
|
* PS (Port Select): 0x00 (PT/UMM for LAN)
|
|
* PT (PHY Test): 0x00 (no test mode)
|
|
* UMM (Use MDIO Mode): 0x00 (state machine is disabled)
|
|
*/
|
|
SW_WRITE_REG(INCA_IP_Switch_MDIO_CFG, 0x4c50);
|
|
|
|
/* init PHY:
|
|
* SL (Auto Neg. Speed for LAN)
|
|
* SP (Auto Neg. Speed for PC)
|
|
* LL (Link Status for LAN)
|
|
* LP (Link Status for PC)
|
|
* DL (Duplex Status for LAN)
|
|
* DP (Duplex Status for PC)
|
|
* PL (Auto Neg. Pause Status for LAN)
|
|
* PP (Auto Neg. Pause Status for PC)
|
|
*/
|
|
SW_WRITE_REG (INCA_IP_Switch_EPHY, 0xff);
|
|
|
|
/* MDIO_ACC:
|
|
* RA (Request/Ack) 0x01 (Request)
|
|
* RW (Read/Write) 0x01 (Write)
|
|
* PHY_ADDR 0x05 (PC)
|
|
* REG_ADDR 0x00 (PHY_BCR: basic control register)
|
|
* PHY_DATA 0x8000
|
|
* Reset - software reset
|
|
* LB (loop back) - normal
|
|
* SS (speed select) - 10 Mbit/s
|
|
* ANE (auto neg. enable) - enable
|
|
* PD (power down) - normal
|
|
* ISO (isolate) - normal
|
|
* RAN (restart auto neg.) - normal
|
|
* DM (duplex mode) - half duplex
|
|
* CT (collision test) - enable
|
|
*/
|
|
SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0a09000);
|
|
|
|
/* MDIO_ACC:
|
|
* RA (Request/Ack) 0x01 (Request)
|
|
* RW (Read/Write) 0x01 (Write)
|
|
* PHY_ADDR 0x06 (LAN)
|
|
* REG_ADDR 0x00 (PHY_BCR: basic control register)
|
|
* PHY_DATA 0x8000
|
|
* Reset - software reset
|
|
* LB (loop back) - normal
|
|
* SS (speed select) - 10 Mbit/s
|
|
* ANE (auto neg. enable) - enable
|
|
* PD (power down) - normal
|
|
* ISO (isolate) - normal
|
|
* RAN (restart auto neg.) - normal
|
|
* DM (duplex mode) - half duplex
|
|
* CT (collision test) - enable
|
|
*/
|
|
SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0c09000);
|
|
|
|
#endif
|
|
|
|
/* Make sure the CPU port is disabled for now. We
|
|
* don't want packets to get stacked for us until
|
|
* we enable DMA and are prepared to receive them.
|
|
*/
|
|
SW_WRITE_REG(INCA_IP_Switch_ST_PT,0xf);
|
|
|
|
SW_READ_REG(INCA_IP_Switch_ARL_CTL, regValue);
|
|
|
|
/* CRC GEN is enabled.
|
|
*/
|
|
regValue |= 0x00000200;
|
|
SW_WRITE_REG(INCA_IP_Switch_ARL_CTL, regValue);
|
|
|
|
/* ADD TAG is disabled.
|
|
*/
|
|
SW_READ_REG(INCA_IP_Switch_PMAC_HD_CTL, regValue);
|
|
regValue &= ~0x00000002;
|
|
SW_WRITE_REG(INCA_IP_Switch_PMAC_HD_CTL, regValue);
|
|
}
|
|
|
|
|
|
static void inca_dma_init(void)
|
|
{
|
|
/* Switch off all DMA channels.
|
|
*/
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR1, INCA_IP_DMA_DMA_RXCCR1_OFF);
|
|
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR1, INCA_IP_DMA_DMA_TXCCR1_OFF);
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR2, INCA_IP_DMA_DMA_TXCCR2_OFF);
|
|
|
|
/* Setup TX channel polling time.
|
|
*/
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_TXPOLL, INCA_DMA_TX_POLLING_TIME);
|
|
|
|
/* Setup RX channel polling time.
|
|
*/
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_RXPOLL, INCA_DMA_RX_POLLING_TIME);
|
|
|
|
/* ERRATA: write reset value into the DMA RX IMR register.
|
|
*/
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_RXIMR, 0xFFFFFFFF);
|
|
|
|
/* Just in case: disable all transmit interrupts also.
|
|
*/
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_TXIMR, 0xFFFFFFFF);
|
|
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_TXISR, 0xFFFFFFFF);
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_RXISR, 0xFFFFFFFF);
|
|
}
|
|
|
|
#if defined(CONFIG_INCA_IP_SWITCH_AMDIX)
|
|
static int inca_amdix(void)
|
|
{
|
|
u32 phyReg1 = 0;
|
|
u32 phyReg4 = 0;
|
|
u32 phyReg5 = 0;
|
|
u32 phyReg6 = 0;
|
|
u32 phyReg31 = 0;
|
|
u32 regEphy = 0;
|
|
int mdi_flag;
|
|
int retries;
|
|
|
|
/* Setup GPIO pins.
|
|
*/
|
|
*INCA_IP_AUTO_MDIX_LAN_PORTS_DIR |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
|
|
*INCA_IP_AUTO_MDIX_LAN_PORTS_ALTSEL |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
|
|
|
|
#if 0
|
|
/* Wait for signal.
|
|
*/
|
|
retries = WAIT_SIGNAL_RETRIES;
|
|
while (--retries) {
|
|
SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
|
|
(0x1 << 31) | /* RA */
|
|
(0x0 << 30) | /* Read */
|
|
(0x6 << 21) | /* LAN */
|
|
(17 << 16)); /* PHY_MCSR */
|
|
do {
|
|
SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1);
|
|
} while (phyReg1 & (1 << 31));
|
|
|
|
if (phyReg1 & (1 << 1)) {
|
|
/* Signal detected */
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!retries)
|
|
goto Fail;
|
|
#endif
|
|
|
|
/* Set MDI mode.
|
|
*/
|
|
*INCA_IP_AUTO_MDIX_LAN_PORTS_OUT &= ~(1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
|
|
mdi_flag = 1;
|
|
|
|
/* Wait for link.
|
|
*/
|
|
retries = WAIT_LINK_RETRIES;
|
|
while (--retries) {
|
|
udelay(LINK_RETRY_DELAY * 1000);
|
|
SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
|
|
(0x1 << 31) | /* RA */
|
|
(0x0 << 30) | /* Read */
|
|
(0x6 << 21) | /* LAN */
|
|
(1 << 16)); /* PHY_BSR */
|
|
do {
|
|
SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1);
|
|
} while (phyReg1 & (1 << 31));
|
|
|
|
if (phyReg1 & (1 << 2)) {
|
|
/* Link is up */
|
|
break;
|
|
} else if (mdi_flag) {
|
|
/* Set MDIX mode */
|
|
*INCA_IP_AUTO_MDIX_LAN_PORTS_OUT |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
|
|
mdi_flag = 0;
|
|
} else {
|
|
/* Set MDI mode */
|
|
*INCA_IP_AUTO_MDIX_LAN_PORTS_OUT &= ~(1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
|
|
mdi_flag = 1;
|
|
}
|
|
}
|
|
|
|
if (!retries) {
|
|
goto Fail;
|
|
} else {
|
|
SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
|
|
(0x1 << 31) | /* RA */
|
|
(0x0 << 30) | /* Read */
|
|
(0x6 << 21) | /* LAN */
|
|
(1 << 16)); /* PHY_BSR */
|
|
do {
|
|
SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1);
|
|
} while (phyReg1 & (1 << 31));
|
|
|
|
/* Auto-negotiation / Parallel detection complete
|
|
*/
|
|
if (phyReg1 & (1 << 5)) {
|
|
SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
|
|
(0x1 << 31) | /* RA */
|
|
(0x0 << 30) | /* Read */
|
|
(0x6 << 21) | /* LAN */
|
|
(31 << 16)); /* PHY_SCSR */
|
|
do {
|
|
SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg31);
|
|
} while (phyReg31 & (1 << 31));
|
|
|
|
switch ((phyReg31 >> 2) & 0x7) {
|
|
case INCA_SWITCH_PHY_SPEED_10H:
|
|
/* 10Base-T Half-duplex */
|
|
regEphy = 0;
|
|
break;
|
|
case INCA_SWITCH_PHY_SPEED_10F:
|
|
/* 10Base-T Full-duplex */
|
|
regEphy = INCA_IP_Switch_EPHY_DL;
|
|
break;
|
|
case INCA_SWITCH_PHY_SPEED_100H:
|
|
/* 100Base-TX Half-duplex */
|
|
regEphy = INCA_IP_Switch_EPHY_SL;
|
|
break;
|
|
case INCA_SWITCH_PHY_SPEED_100F:
|
|
/* 100Base-TX Full-duplex */
|
|
regEphy = INCA_IP_Switch_EPHY_SL | INCA_IP_Switch_EPHY_DL;
|
|
break;
|
|
}
|
|
|
|
/* In case of Auto-negotiation,
|
|
* update the negotiated PAUSE support status
|
|
*/
|
|
if (phyReg1 & (1 << 3)) {
|
|
SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
|
|
(0x1 << 31) | /* RA */
|
|
(0x0 << 30) | /* Read */
|
|
(0x6 << 21) | /* LAN */
|
|
(6 << 16)); /* PHY_ANER */
|
|
do {
|
|
SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg6);
|
|
} while (phyReg6 & (1 << 31));
|
|
|
|
/* We are Autoneg-able.
|
|
* Is Link partner also able to autoneg?
|
|
*/
|
|
if (phyReg6 & (1 << 0)) {
|
|
SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
|
|
(0x1 << 31) | /* RA */
|
|
(0x0 << 30) | /* Read */
|
|
(0x6 << 21) | /* LAN */
|
|
(4 << 16)); /* PHY_ANAR */
|
|
do {
|
|
SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg4);
|
|
} while (phyReg4 & (1 << 31));
|
|
|
|
/* We advertise PAUSE capab.
|
|
* Does link partner also advertise it?
|
|
*/
|
|
if (phyReg4 & (1 << 10)) {
|
|
SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
|
|
(0x1 << 31) | /* RA */
|
|
(0x0 << 30) | /* Read */
|
|
(0x6 << 21) | /* LAN */
|
|
(5 << 16)); /* PHY_ANLPAR */
|
|
do {
|
|
SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg5);
|
|
} while (phyReg5 & (1 << 31));
|
|
|
|
/* Link partner is PAUSE capab.
|
|
*/
|
|
if (phyReg5 & (1 << 10)) {
|
|
regEphy |= INCA_IP_Switch_EPHY_PL;
|
|
}
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
/* Link is up */
|
|
regEphy |= INCA_IP_Switch_EPHY_LL;
|
|
|
|
SW_WRITE_REG(INCA_IP_Switch_EPHY, regEphy);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
Fail:
|
|
printf("No Link on LAN port\n");
|
|
return -1;
|
|
}
|
|
#endif /* CONFIG_INCA_IP_SWITCH_AMDIX */
|
|
|