upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/arm/cpu/armv7/exynos/common_setup.h

107 lines
2.7 KiB

/*
* Common APIs for EXYNOS based board
*
* Copyright (C) 2013 Samsung Electronics
* Rajeshwari Shinde <rajeshwari.s@samsung.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <asm/arch/system.h>
#define DMC_OFFSET 0x10000
/*
* Memory initialization
*
* @param reset Reset PHY during initialization.
*/
void mem_ctrl_init(int reset);
/* System Clock initialization */
void system_clock_init(void);
/*
* Init subsystems according to the reset status
*
* @return 0 for a normal boot, non-zero for a resume
*/
int do_lowlevel_init(void);
void sdelay(unsigned long);
enum l2_cache_params {
CACHE_DATA_RAM_LATENCY_2_CYCLES = (2 << 0),
CACHE_DATA_RAM_LATENCY_3_CYCLES = (3 << 0),
CACHE_DISABLE_CLEAN_EVICT = (1 << 3),
CACHE_DATA_RAM_SETUP = (1 << 5),
CACHE_TAG_RAM_LATENCY_2_CYCLES = (2 << 6),
CACHE_TAG_RAM_LATENCY_3_CYCLES = (3 << 6),
CACHE_ENABLE_HAZARD_DETECT = (1 << 7),
CACHE_TAG_RAM_SETUP = (1 << 9),
CACHE_ECC_AND_PARITY = (1 << 21),
CACHE_ENABLE_FORCE_L2_LOGIC = (1 << 27)
};
#ifndef CONFIG_SYS_L2CACHE_OFF
/*
* Configure L2CTLR to get timings that keep us from hanging/crashing.
*
* Must be inline here since low_power_start() is called without a
* stack (!).
*/
static inline void configure_l2_ctlr(void)
{
uint32_t val;
mrc_l2_ctlr(val);
val |= CACHE_TAG_RAM_SETUP |
CACHE_DATA_RAM_SETUP |
CACHE_TAG_RAM_LATENCY_2_CYCLES |
CACHE_DATA_RAM_LATENCY_2_CYCLES;
if (proid_is_exynos5420() || proid_is_exynos5800()) {
val |= CACHE_ECC_AND_PARITY |
CACHE_TAG_RAM_LATENCY_3_CYCLES |
CACHE_DATA_RAM_LATENCY_3_CYCLES;
}
mcr_l2_ctlr(val);
}
/*
* Configure L2ACTLR.
*
* Must be inline here since low_power_start() is called without a
* stack (!).
*/
static inline void configure_l2_actlr(void)
{
uint32_t val;
if (proid_is_exynos5420() || proid_is_exynos5800()) {
mrc_l2_aux_ctlr(val);
val |= CACHE_ENABLE_FORCE_L2_LOGIC |
CACHE_DISABLE_CLEAN_EVICT;
mcr_l2_aux_ctlr(val);
}
}
#endif