upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/doc/README.LED_display

27 lines
891 B

LED display internal API
=======================================
This README describes the LED display API.
The API is defined by the include file include/led-display.h
The first step in to define CONFIG_CMD_DISPLAY in the board config file.
Then you need to provide the following functions to access LED display:
void display_set(int cmd);
This function should control the state of the LED display. Argument is
an ORed combination of the following values:
DISPLAY_CLEAR -- clear the display
DISPLAY_HOME -- set the position to the beginning of display
int display_putc(char c);
This function should display it's parameter on the LED display in the
current position. Returns the displayed character on success or -1 in
case of failure.
With this functions defined 'display' command will display it's
arguments on the LED display (or clear the display if called without
arguments).