upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/doc
Bin Meng 0e028bf970 x86: doc: Remove stale sections of 64-bit support 6 years ago
..
SPI
SPL
chromium
device-tree-bindings net: phy: ti: Add binding for the CLK_OUT pin muxing 6 years ago
driver-model pci: Update documentation to make 'compatible' string optional 6 years ago
mvebu
uImage.FIT
I2C_Edge_Conditions
README.440-DDR-performance Use correct spelling of "U-Boot" 8 years ago
README.AMCC-eval-boards-cleanup
README.ARC
README.ARM-memory-map Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE 14 years ago
README.AX25
README.Heterogeneous-SoCs
README.JFFS2
README.JFFS2_NAND
README.LED
README.LED_display
README.N1213
README.NDS32 doc/README: documents and readme for NDS32 arch 13 years ago
README.NetConsole
README.OFT
README.POST
README.SNTP
README.SPL
README.TPL
README.VLAN
README.VSC3316-3308
README.ae350
README.ag101p
README.android-fastboot
README.android-fastboot-protocol
README.arm-caches
README.arm-relocation
README.arm64 doc: update README.arm64 8 years ago
README.armada-secureboot
README.at91
README.atmel_mci
README.atmel_pmecc
README.autoboot
README.avb2 avb_verify: support using OP-TEE TA AVB 6 years ago
README.b4860qds
README.bcm7xxx
README.bedbug
README.bitbangMII Coding Style cleanup; update CHANGELOG, prepare -rc1 15 years ago
README.blackfin
README.bootmenu
README.boston
README.bus_vcxk
README.cfi
README.chromium
README.clang
README.coccinelle
README.commands
README.commands.itest
README.commands.spl Fix various typos, scattered over the code. 8 years ago
README.console SPDX: Convert all of our single license tags to Linux Kernel style 6 years ago
README.davinci
README.davinci.nand_spl
README.dfutftp
README.displaying-bmps
README.distro
README.dns
README.drivers.eth net: cosmetic: Fix var naming net <-> eth drivers 9 years ago
README.enetaddr
README.esbc_validate
README.ext4
README.falcon
README.fdt-control doc: Update docs for device tree in SPL, TPL 6 years ago
README.fdt-overlays doc: overlays: Tweak documentation regarding overlays 7 years ago
README.fec_mxc
README.fsl-clk
README.fsl-ddr
README.fsl-dpaa
README.fsl-esdhc
README.fsl-hwconfig powerpc/85xx: Specify hwconfig usage for USB controller 13 years ago
README.fsl-trustzone-components
README.fsl_iim
README.fuse
README.generic-board
README.generic_usb_ohci
README.gpt
README.hwconfig
README.i2c
README.imx5
README.imx6
README.imx25
README.imx27
README.imximage
README.iomux
README.iscsi
README.kconfig
README.kwbimage
README.link-local
README.log
README.lynxkdi
README.m68k
README.m54418twr
README.malta
README.marubun-pcmcia
README.marvell
README.memory-test
README.menu
README.mips
README.mpc74xx
README.mpc83xx.ddrecc
README.mpc83xxads
README.mpc85xx
README.mpc85xx-sd-spi-boot powerpc: P2010: Drop configuration for P2010 7 years ago
README.mpc85xx-spin-table
README.mpc85xxcds
README.multi-dtb-fit
README.mxc_hab
README.mxc_ocotp
README.mxs
README.mxsimage
README.nand
README.nand-boot-ppc440
README.ne2000
README.nios2
README.nokia_rx51
README.nvme
README.odroid
README.omap-ulpi-viewport
README.omap3
README.pblimage powerpc/tool/pbl: fix pbl image compiling process 11 years ago
README.plan9
README.power-framework
README.pxe cmd: pxe: add support for FIT config selection 6 years ago
README.qemu-arm
README.qemu-mips
README.qemu-riscv riscv: Add QEMU virt board support 6 years ago
README.ramboot-ppc85xx
README.rmobile
README.rockchip
README.rockusb
README.s5pc1xx
README.sata
README.sched
README.scrapyard
README.sdp
README.semihosting
README.serial_multi
README.sh
README.sh7752evb
README.sh7753evb
README.sha1
README.silent
README.socfpga
README.spear
README.splashprepare
README.srio-pcie-boot-corenet
README.standalone
README.t1040-l2switch
README.tee Documentation: tee uclass and op-tee driver 6 years ago
README.ti-secure
README.trace
README.u-boot_on_efi
README.ubi
README.ubispl
README.ublimage
README.uefi
README.unaligned-memory-access.txt
README.uniphier
README.update
README.usb
README.vf610
README.video
README.vxworks
README.watchdog
README.x86 x86: doc: Remove stale sections of 64-bit support 6 years ago
README.xtensa
README.zfs
README.zynq
bounces patman: add support for omitting bouncing addresses 7 years ago
feature-removal-schedule.txt
git-mailrc
kwboot.1
mkimage.1

README.zynq

# SPDX-License-Identifier: GPL-2.0+
#
# Xilinx ZYNQ U-Boot
#
# (C) Copyright 2013 Xilinx, Inc.

1. About this

This document describes the information about Xilinx Zynq U-Boot -
like supported boards, ML status and TODO list.

2. Zynq boards

Xilinx Zynq-7000 All Programmable SoCs enable extensive system level
differentiation, integration, and flexibility through hardware, software,
and I/O programmability.

* zc702 (single qspi, gem0, mmc) [1]
* zc706 (dual parallel qspi, gem0, mmc) [2]
* zed (single qspi, gem0, mmc) [3]
* microzed (single qspi, gem0, mmc) [4]
* zc770
- zc770-xm010 (single qspi, gem0, mmc)
- zc770-xm011 (8 or 16 bit nand)
- zc770-xm012 (nor)
- zc770-xm013 (dual parallel qspi, gem1)

3. Building

ex. configure and build for zc702 board
$ make zynq_zc702_config
$ make

4. Bootmode

Zynq has a facility to read the bootmode from the slcr bootmode register
once user is setting through jumpers on the board - see page no:1546 on [5]

All possible bootmode values are defined in Table 6-2:Boot_Mode MIO Pins
on [5].

board_late_init() will read the bootmode values using slcr bootmode register
at runtime and assign the modeboot variable to specific bootmode string which
is intern used in autoboot.

SLCR bootmode register Bit[3:0] values
#define ZYNQ_BM_NOR 0x02
#define ZYNQ_BM_SD 0x05
#define ZYNQ_BM_JTAG 0x0

"modeboot" variable can assign any of "norboot", "sdboot" or "jtagboot"
bootmode strings at runtime.

5. Mainline status

- Added basic board configurations support.
- Added zynq u-boot bsp code - arch/arm/cpu/armv7/zynq
- Added zynq boards named - zc70x, zed, microzed, zc770_xm010/xm011/xm012/xm013
- Added zynq drivers:
serial - drivers/serial/serial_zynq.c
net - drivers/net/zynq_gem.c
mmc - drivers/mmc/zynq_sdhci.c
spi - drivers/spi/zynq_spi.c
qspi - drivers/spi/zynq_qspi.c
i2c - drivers/i2c/zynq_i2c.c
nand - drivers/mtd/nand/raw/zynq_nand.c
- Done proper cleanups on board configurations
- Added basic FDT support for zynq boards
- d-cache support for zynq_gem.c

6. TODO

- Add FDT support on individual drivers

[1] http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC702-G.htm
[2] http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC706-G.htm
[3] http://zedboard.org/product/zedboard
[4] http://zedboard.org/product/microzed
[5] http://www.xilinx.com/support/documentation/user_guides/ug585-Zynq-7000-TRM.pdf

--
Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Sun Dec 15 14:52:41 IST 2013