upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/doc/README.fsl-esdhc

23 lines
864 B

Freescale esdhc-specific options
- CONFIG_FSL_ESDHC_ADAPTER_IDENT
Support Freescale adapter card type identification. This is implemented by
operating Qixis FPGA relevant registers. The STAT_PRES1 register has SDHC
Card ID[0:2] bits showing the type of card installed in the SDHC Adapter Slot.
SDHC Card ID[0:2] Adapter Card Type
0b000 reserved
0b001 eMMC Card Rev4.5
0b010 SD/MMC Legacy Card
0b011 eMMC Card Rev4.4
0b100 reserved
0b101 MMC Card
0b110 SD Card Rev2.0/3.0
0b111 No card is present
- CONFIG_SYS_FSL_ESDHC_LE
ESDHC IP is in little-endian mode. Accessing ESDHC registers can be
determined by ESDHC IP's endian mode or processor's endian mode.
- CONFIG_SYS_FSL_ESDHC_BE
ESDHC IP is in big-endian mode. Accessing ESDHC registers can be determined
by ESDHC IP's endian mode or processor's endian mode.