Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
30194 Commits
3 Branches
0 Tags
148 MiB
Tag: Branch: Tree: 10c63f2ebe
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '10c63f2ebe'
${ noResults }
u-boot/board/ti/dra7xx/mux_data.h

145 lines
5.9 KiB
Raw Normal View History Unescape

arm: dra7xx: Add board files for DRA7XX socs Adding new board files for DRA7XX socs. The pad registers layout is changed completely from OMAP5 So introducing the new structure here and also adding the minimal data. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Nishant Kamat <nskamat@ti.com> Signed-off-by: R Sricharan <r.sricharan@ti.com> Reviewed-by: Tom Rini <trini@ti.com> [trini: Adapt omap_mmc_init call for last 2 params] Signed-off-by: Tom Rini <trini@ti.com>
12 years ago
/*
* (C) Copyright 2013
* Texas Instruments Incorporated, <www.ti.com>
*
* Sricharan R <r.sricharan@ti.com>
* Nishant Kamat <nskamat@ti.com>
*
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
12 years ago
* SPDX-License-Identifier: GPL-2.0+
arm: dra7xx: Add board files for DRA7XX socs Adding new board files for DRA7XX socs. The pad registers layout is changed completely from OMAP5 So introducing the new structure here and also adding the minimal data. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Nishant Kamat <nskamat@ti.com> Signed-off-by: R Sricharan <r.sricharan@ti.com> Reviewed-by: Tom Rini <trini@ti.com> [trini: Adapt omap_mmc_init call for last 2 params] Signed-off-by: Tom Rini <trini@ti.com>
12 years ago
*/
#ifndef _MUX_DATA_DRA7XX_H_
#define _MUX_DATA_DRA7XX_H_
#include <asm/arch/mux_dra7xx.h>
const struct pad_conf_entry core_padconf_array_essential[] = {
ARM: DRA7xx: Update pinmux data Updating pinmux data as specified in the latest DM Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Balaji T K <balajitk@ti.com>
12 years ago
{MMC1_CLK, (IEN | PTU | PDIS | M0)}, /* MMC1_CLK */
{MMC1_CMD, (IEN | PTU | PDIS | M0)}, /* MMC1_CMD */
{MMC1_DAT0, (IEN | PTU | PDIS | M0)}, /* MMC1_DAT0 */
{MMC1_DAT1, (IEN | PTU | PDIS | M0)}, /* MMC1_DAT1 */
{MMC1_DAT2, (IEN | PTU | PDIS | M0)}, /* MMC1_DAT2 */
{MMC1_DAT3, (IEN | PTU | PDIS | M0)}, /* MMC1_DAT3 */
{MMC1_SDCD, (FSC | IEN | PTU | PDIS | M0)}, /* MMC1_SDCD */
{MMC1_SDWP, (FSC | IEN | PTD | PEN | M14)}, /* MMC1_SDWP */
board/ti/dra7xx: add support for parallel NOR This patch adds support for parallel NOR device (S29GL512S10) present on J6-EVM. The Flash device is connected to GPMC controller on chip-select[0] and accessed as memory-mapped device. It has data-witdh=x16, capacity-64MBytes(512Mbits) and is CFI compatible. As multiple devices are share GPMC pins on this board, so following board settings are required to detect NOR device: SW5.1 (NAND_BOOTn) = OFF (logic-1) SW5.2 (NOR_BOOTn) = ON (logic-0) /* Active-low */ SW5.3 (eMMC_BOOTn) = OFF (logic-1) SW5.4 (QSPI_BOOTn) = OFF (logic-1) And also set appropriate SYSBOOT configurations: SW3.1 (SYSBOOT[ 8])= ON (logic-1) /* selects SYS_CLK1 speed */ SW3.2 (SYSBOOT[ 9])= OFF (logic-0) /* selects SYS_CLK1 speed */ SW3.3 (SYSBOOT[10])= ON (logic-1) /* wait-pin monitoring = enabled */ SW3.4 (SYSBOOT[11])= OFF (logic-0) /* device type: Non Muxed */ SW3.5 (SYSBOOT[12])= OFF (logic-0) /* device type: Non Muxed */ SW3.6 (SYSBOOT[13])= ON (logic-1) /* device bus-width: 1(x16) */ SW3.7 (SYSBOOT[14])= OFF (logic-0) /* reserved */ SW3.8 (SYSBOOT[15])= ON (logic-1) /* reserved */ Also, following changes are required to enable NOR Flash support in dra7xx_evm board profile:
11 years ago
#if defined(CONFIG_NOR)
/* NOR only pin-mux */
{GPMC_A0 , M0 | IDIS | PDIS}, /* nor.GPMC_A[0 ] */
{GPMC_A1 , M0 | IDIS | PDIS}, /* nor.GPMC_A[1 ] */
{GPMC_A2 , M0 | IDIS | PDIS}, /* nor.GPMC_A[2 ] */
{GPMC_A3 , M0 | IDIS | PDIS}, /* nor.GPMC_A[3 ] */
{GPMC_A4 , M0 | IDIS | PDIS}, /* nor.GPMC_A[4 ] */
{GPMC_A5 , M0 | IDIS | PDIS}, /* nor.GPMC_A[5 ] */
{GPMC_A6 , M0 | IDIS | PDIS}, /* nor.GPMC_A[6 ] */
{GPMC_A7 , M0 | IDIS | PDIS}, /* nor.GPMC_A[7 ] */
{GPMC_A8 , M0 | IDIS | PDIS}, /* nor.GPMC_A[8 ] */
{GPMC_A9 , M0 | IDIS | PDIS}, /* nor.GPMC_A[9 ] */
{GPMC_A10 , M0 | IDIS | PDIS}, /* nor.GPMC_A[10] */
{GPMC_A11 , M0 | IDIS | PDIS}, /* nor.GPMC_A[11] */
{GPMC_A12 , M0 | IDIS | PDIS}, /* nor.GPMC_A[12] */
{GPMC_A13 , M0 | IDIS | PDIS}, /* nor.GPMC_A[13] */
{GPMC_A14 , M0 | IDIS | PDIS}, /* nor.GPMC_A[14] */
{GPMC_A15 , M0 | IDIS | PDIS}, /* nor.GPMC_A[15] */
{GPMC_A16 , M0 | IDIS | PDIS}, /* nor.GPMC_A[16] */
{GPMC_A17 , M0 | IDIS | PDIS}, /* nor.GPMC_A[17] */
{GPMC_A18 , M0 | IDIS | PDIS}, /* nor.GPMC_A[18] */
{GPMC_A19 , M0 | IDIS | PDIS}, /* nor.GPMC_A[19] */
{GPMC_A20 , M0 | IDIS | PDIS}, /* nor.GPMC_A[20] */
{GPMC_A21 , M0 | IDIS | PDIS}, /* nor.GPMC_A[21] */
{GPMC_A22 , M0 | IDIS | PDIS}, /* nor.GPMC_A[22] */
{GPMC_A23 , M0 | IDIS | PDIS}, /* nor.GPMC_A[23] */
{GPMC_A24 , M0 | IDIS | PDIS}, /* nor.GPMC_A[24] */
{GPMC_A25 , M0 | IDIS | PDIS}, /* nor.GPMC_A[25] */
{GPMC_A26 , M0 | IDIS | PDIS}, /* nor.GPMC_A[26] */
#else
/* eMMC pinmux */
ARM: DRA7xx: Update pinmux data Updating pinmux data as specified in the latest DM Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Balaji T K <balajitk@ti.com>
12 years ago
{GPMC_A19, (IEN | PTU | PDIS | M1)}, /* mmc2_dat4 */
{GPMC_A20, (IEN | PTU | PDIS | M1)}, /* mmc2_dat5 */
{GPMC_A21, (IEN | PTU | PDIS | M1)}, /* mmc2_dat6 */
{GPMC_A22, (IEN | PTU | PDIS | M1)}, /* mmc2_dat7 */
{GPMC_A23, (IEN | PTU | PDIS | M1)}, /* mmc2_clk */
{GPMC_A24, (IEN | PTU | PDIS | M1)}, /* mmc2_dat0 */
{GPMC_A25, (IEN | PTU | PDIS | M1)}, /* mmc2_dat1 */
{GPMC_A26, (IEN | PTU | PDIS | M1)}, /* mmc2_dat2 */
{GPMC_A27, (IEN | PTU | PDIS | M1)}, /* mmc2_dat3 */
{GPMC_CS1, (IEN | PTU | PDIS | M1)}, /* mmm2_cmd */
board/ti/dra7xx: add support for parallel NOR This patch adds support for parallel NOR device (S29GL512S10) present on J6-EVM. The Flash device is connected to GPMC controller on chip-select[0] and accessed as memory-mapped device. It has data-witdh=x16, capacity-64MBytes(512Mbits) and is CFI compatible. As multiple devices are share GPMC pins on this board, so following board settings are required to detect NOR device: SW5.1 (NAND_BOOTn) = OFF (logic-1) SW5.2 (NOR_BOOTn) = ON (logic-0) /* Active-low */ SW5.3 (eMMC_BOOTn) = OFF (logic-1) SW5.4 (QSPI_BOOTn) = OFF (logic-1) And also set appropriate SYSBOOT configurations: SW3.1 (SYSBOOT[ 8])= ON (logic-1) /* selects SYS_CLK1 speed */ SW3.2 (SYSBOOT[ 9])= OFF (logic-0) /* selects SYS_CLK1 speed */ SW3.3 (SYSBOOT[10])= ON (logic-1) /* wait-pin monitoring = enabled */ SW3.4 (SYSBOOT[11])= OFF (logic-0) /* device type: Non Muxed */ SW3.5 (SYSBOOT[12])= OFF (logic-0) /* device type: Non Muxed */ SW3.6 (SYSBOOT[13])= ON (logic-1) /* device bus-width: 1(x16) */ SW3.7 (SYSBOOT[14])= OFF (logic-0) /* reserved */ SW3.8 (SYSBOOT[15])= ON (logic-1) /* reserved */ Also, following changes are required to enable NOR Flash support in dra7xx_evm board profile:
11 years ago
#endif
board: ti: dra7xx: add mux data for UART3 J6 EVM can be built with UART3 as console, but currently there's nothing muxing UART3 correctly. Likely this only works because, based on commit log, author was only testing with UART3 boot and - I assume - ROM code leave UART3 correctly muxed in that case. If we want to boot from MMC and still use UART3 as console, then we need to mux those signals correctly. Signed-off-by: Felipe Balbi <balbi@ti.com>
11 years ago
#if (CONFIG_CONS_INDEX == 1)
ARM: DRA7xx: Update pinmux data Updating pinmux data as specified in the latest DM Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Balaji T K <balajitk@ti.com>
12 years ago
{UART1_RXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART1_RXD */
{UART1_TXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART1_TXD */
{UART1_CTSN, (IEN | PTU | PDIS | M3)}, /* UART1_CTSN */
{UART1_RTSN, (IEN | PTU | PDIS | M3)}, /* UART1_RTSN */
board: ti: dra7xx: add mux data for UART3 J6 EVM can be built with UART3 as console, but currently there's nothing muxing UART3 correctly. Likely this only works because, based on commit log, author was only testing with UART3 boot and - I assume - ROM code leave UART3 correctly muxed in that case. If we want to boot from MMC and still use UART3 as console, then we need to mux those signals correctly. Signed-off-by: Felipe Balbi <balbi@ti.com>
11 years ago
#elif (CONFIG_CONS_INDEX == 3)
{UART3_RXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART3_RXD */
{UART3_TXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART3_TXD */
#endif
ARM: DRA7xx: Update pinmux data Updating pinmux data as specified in the latest DM Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Balaji T K <balajitk@ti.com>
12 years ago
{I2C1_SDA, (IEN | PTU | PDIS | M0)}, /* I2C1_SDA */
{I2C1_SCL, (IEN | PTU | PDIS | M0)}, /* I2C1_SCL */
ARM: DRA7xx: Add CPSW and MDIO pinmux support Adding CPSW Slave 0 and MDIO pinmux support for DRA7xx EVM Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
12 years ago
{MDIO_MCLK, (PTU | PEN | M0)}, /* MDIO_MCLK */
{MDIO_D, (IEN | PTU | PEN | M0)}, /* MDIO_D */
{RGMII0_TXC, (M0) },
{RGMII0_TXCTL, (M0) },
{RGMII0_TXD3, (M0) },
{RGMII0_TXD2, (M0) },
{RGMII0_TXD1, (M0) },
{RGMII0_TXD0, (M0) },
{RGMII0_RXC, (IEN | M0) },
{RGMII0_RXCTL, (IEN | M0) },
{RGMII0_RXD3, (IEN | M0) },
{RGMII0_RXD2, (IEN | M0) },
{RGMII0_RXD1, (IEN | M0) },
{RGMII0_RXD0, (IEN | M0) },
ARM: DRA7xx: Add cpsw second port pinmux Add cpsw second slave port pinmux to use it as primary ethernet port Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
11 years ago
{VIN2A_D12, (M3) },
{VIN2A_D13, (M3) },
{VIN2A_D14, (M3) },
{VIN2A_D15, (M3) },
{VIN2A_D16, (M3) },
{VIN2A_D17, (M3) },
{VIN2A_D18, (IEN | M3)},
{VIN2A_D19, (IEN | M3)},
{VIN2A_D20, (IEN | M3)},
{VIN2A_D21, (IEN | M3)},
{VIN2A_D22, (IEN | M3)},
{VIN2A_D23, (IEN | M3)},
board/ti/dra7xx: add support for parallel NOR This patch adds support for parallel NOR device (S29GL512S10) present on J6-EVM. The Flash device is connected to GPMC controller on chip-select[0] and accessed as memory-mapped device. It has data-witdh=x16, capacity-64MBytes(512Mbits) and is CFI compatible. As multiple devices are share GPMC pins on this board, so following board settings are required to detect NOR device: SW5.1 (NAND_BOOTn) = OFF (logic-1) SW5.2 (NOR_BOOTn) = ON (logic-0) /* Active-low */ SW5.3 (eMMC_BOOTn) = OFF (logic-1) SW5.4 (QSPI_BOOTn) = OFF (logic-1) And also set appropriate SYSBOOT configurations: SW3.1 (SYSBOOT[ 8])= ON (logic-1) /* selects SYS_CLK1 speed */ SW3.2 (SYSBOOT[ 9])= OFF (logic-0) /* selects SYS_CLK1 speed */ SW3.3 (SYSBOOT[10])= ON (logic-1) /* wait-pin monitoring = enabled */ SW3.4 (SYSBOOT[11])= OFF (logic-0) /* device type: Non Muxed */ SW3.5 (SYSBOOT[12])= OFF (logic-0) /* device type: Non Muxed */ SW3.6 (SYSBOOT[13])= ON (logic-1) /* device bus-width: 1(x16) */ SW3.7 (SYSBOOT[14])= OFF (logic-0) /* reserved */ SW3.8 (SYSBOOT[15])= ON (logic-1) /* reserved */ Also, following changes are required to enable NOR Flash support in dra7xx_evm board profile:
11 years ago
#if defined(CONFIG_NAND) || defined(CONFIG_NOR)
board/ti/dra7xx: add support for parallel NAND This patch adds support for x16 NAND device (MT29F2G16AAD) connected to GPMC chip-select[0] on DRA7xx EVM. As GPMC pins are shared by multiple devices, so in addition to this patch following board settings are required for NAND device detection [1]: SW5.9 (GPMC_WPN) = OFF (logic-1) SW5.1 (NAND_BOOTn) = ON (logic-0) /* Active-low */ SW5.2 (NOR_BOOTn) = OFF (logic-1) SW5.3 (eMMC_BOOTn) = OFF (logic-1) SW5.4 (QSPI_BOOTn) = OFF (logic-1) And also set appropriate SYSBOOT configurations SW2.1 (SYSBOOT[0]) = ON (logic-1) /* selects NAND Boot */ SW2.2 (SYSBOOT[1]) = OFF (logic-0) /* selects NAND Boot */ SW2.3 (SYSBOOT[2]) = OFF (logic-0) /* selects NAND Boot */ SW2.4 (SYSBOOT[3]) = OFF (logic-0) /* selects NAND Boot */ SW2.5 (SYSBOOT[4]) = ON (logic-1) /* selects NAND Boot */ SW2.6 (SYSBOOT[5]) = ON (logic-1) /* selects NAND Boot */ SW2.7 (SYSBOOT[6]) = OFF (logic-0) /* reserved */ SW2.8 (SYSBOOT[7]) = OFF (logic-0) /* reserved */ SW3.1 (SYSBOOT[ 8])= ON (logic-1) /* selects SYS_CLK1 speed */ SW3.2 (SYSBOOT[ 9])= OFF (logic-0) /* selects SYS_CLK1 speed */ SW3.3 (SYSBOOT[10])= ON (logic-1) /* wait-pin monitoring = enabled */ SW3.4 (SYSBOOT[11])= OFF (logic-0) /* device type: Addr/Data Muxed */ SW3.5 (SYSBOOT[12])= ON (logic-1) /* device type: Addr/Data Muxed */ SW3.6 (SYSBOOT[13])= ON (logic-1) /* device bus-width: 1(x16) */ SW3.7 (SYSBOOT[14])= OFF (logic-0) /* reserved */ SW3.8 (SYSBOOT[15])= ON (logic-1) /* reserved */ Following changes are required in board.cfg to enable NAND on J6-EVM:
11 years ago
/* NAND / NOR pin-mux */
{GPMC_AD0 , M0 | IEN | PDIS}, /* GPMC_AD0 */
{GPMC_AD1 , M0 | IEN | PDIS}, /* GPMC_AD1 */
{GPMC_AD2 , M0 | IEN | PDIS}, /* GPMC_AD2 */
{GPMC_AD3 , M0 | IEN | PDIS}, /* GPMC_AD3 */
{GPMC_AD4 , M0 | IEN | PDIS}, /* GPMC_AD4 */
{GPMC_AD5 , M0 | IEN | PDIS}, /* GPMC_AD5 */
{GPMC_AD6 , M0 | IEN | PDIS}, /* GPMC_AD6 */
{GPMC_AD7 , M0 | IEN | PDIS}, /* GPMC_AD7 */
{GPMC_AD8 , M0 | IEN | PDIS}, /* GPMC_AD8 */
{GPMC_AD9 , M0 | IEN | PDIS}, /* GPMC_AD9 */
{GPMC_AD10, M0 | IEN | PDIS}, /* GPMC_AD10 */
{GPMC_AD11, M0 | IEN | PDIS}, /* GPMC_AD11 */
{GPMC_AD12, M0 | IEN | PDIS}, /* GPMC_AD12 */
{GPMC_AD13, M0 | IEN | PDIS}, /* GPMC_AD13 */
{GPMC_AD14, M0 | IEN | PDIS}, /* GPMC_AD14 */
{GPMC_AD15, M0 | IEN | PDIS}, /* GPMC_AD15 */
{GPMC_CS0, M0 | IDIS | PEN | PTU}, /* GPMC chip-select */
{GPMC_ADVN_ALE, M0 | IDIS | PEN | PTD}, /* GPMC Addr latch */
{GPMC_OEN_REN, M0 | IDIS | PEN | PTU}, /* GPMC Read enable */
{GPMC_WEN, M0 | IDIS | PEN | PTU}, /* GPMC Write enable_n */
{GPMC_BEN0, M0 | IDIS | PEN | PTD}, /* GPMC Byte/Column En */
{GPMC_WAIT0, M0 | IEN | PEN | PTU}, /* GPMC Wait/Ready */
/* GPMC_WPN (Write Protect) is controlled by DIP Switch SW10(12) */
#else
/* QSPI pin-mux */
dra7xx_evm: add SPL API, QSPI, and serial flash support Enables support for SPI SPL, QSPI and Spansion serial flash device on the EVM. Configures pin muxes for QSPI mode. Signed-off-by: Matt Porter <matt.porter@linaro.org> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
11 years ago
{GPMC_A13, (IEN | PDIS | M1)}, /* QSPI1_RTCLK */
{GPMC_A14, (IEN | PDIS | M1)}, /* QSPI1_D[3] */
{GPMC_A15, (IEN | PDIS | M1)}, /* QSPI1_D[2] */
ARM: OMAP5: DRA7xx: Fix misleading comments in mux_data.h The comments on the QSPI pad assignments erronously swapped the qspi1_d0 and qspi1_d1 functionality and could cause confusion. QSPI1_D[0] is in fact muxed on pad U1 (gpmc_a16), and QSPI1_D[1] - on pad P3 (gpmc_a17). Fixing comments. Signed-off-by: Lubomir Popov <l-popov@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
10 years ago
{GPMC_A16, (IEN | PDIS | M1)}, /* QSPI1_D[0] */
{GPMC_A17, (IEN | PDIS | M1)}, /* QSPI1_D[1] */
dra7xx_evm: add SPL API, QSPI, and serial flash support Enables support for SPI SPL, QSPI and Spansion serial flash device on the EVM. Configures pin muxes for QSPI mode. Signed-off-by: Matt Porter <matt.porter@linaro.org> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
11 years ago
{GPMC_A18, (M1)}, /* QSPI1_SCLK */
{GPMC_A3, (IEN | PDIS | M1)}, /* QSPI1_CS2 */
{GPMC_A4, (IEN | PDIS | M1)}, /* QSPI1_CS3 */
{GPMC_CS2, (IEN | PTU | PDIS | M1)}, /* QSPI1_CS0 */
{GPMC_CS3, (IEN | PTU | PDIS | M1)}, /* QSPI1_CS1*/
board/ti/dra7xx: add support for parallel NOR This patch adds support for parallel NOR device (S29GL512S10) present on J6-EVM. The Flash device is connected to GPMC controller on chip-select[0] and accessed as memory-mapped device. It has data-witdh=x16, capacity-64MBytes(512Mbits) and is CFI compatible. As multiple devices are share GPMC pins on this board, so following board settings are required to detect NOR device: SW5.1 (NAND_BOOTn) = OFF (logic-1) SW5.2 (NOR_BOOTn) = ON (logic-0) /* Active-low */ SW5.3 (eMMC_BOOTn) = OFF (logic-1) SW5.4 (QSPI_BOOTn) = OFF (logic-1) And also set appropriate SYSBOOT configurations: SW3.1 (SYSBOOT[ 8])= ON (logic-1) /* selects SYS_CLK1 speed */ SW3.2 (SYSBOOT[ 9])= OFF (logic-0) /* selects SYS_CLK1 speed */ SW3.3 (SYSBOOT[10])= ON (logic-1) /* wait-pin monitoring = enabled */ SW3.4 (SYSBOOT[11])= OFF (logic-0) /* device type: Non Muxed */ SW3.5 (SYSBOOT[12])= OFF (logic-0) /* device type: Non Muxed */ SW3.6 (SYSBOOT[13])= ON (logic-1) /* device bus-width: 1(x16) */ SW3.7 (SYSBOOT[14])= OFF (logic-0) /* reserved */ SW3.8 (SYSBOOT[15])= ON (logic-1) /* reserved */ Also, following changes are required to enable NOR Flash support in dra7xx_evm board profile:
11 years ago
#endif /* CONFIG_NAND || CONFIG_NOR */
usb: dra7xx: Add support for dra7xx xhci USB host Add the support for the dra7xx xhci usb host. dra7xx does not contain an EHCI controller so the headers can be removed from the board file. The xHCI host on dra7xx is connected to a usb2 phy so need to add support to enable those clocks. Signed-off-by: Dan Murphy <dmurphy@ti.com>
11 years ago
{USB2_DRVVBUS, (M0 | IEN | FSC) },
ARM: DRA: Enable VTT regulator DRA7 evm REV G and later boards uses a vtt regulator for DDR3 termination and this is controlled by gpio7_11. Configuring gpio7_11. The pad A22(offset 0x3b4) is used by gpio7_11 on REV G and later boards, and left unused on previous boards, so it is safe enough to enable gpio on all DRA7 boards. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
11 years ago
{SPI1_CS1, (PEN | IDIS | M14) },
arm: dra7xx: Add board files for DRA7XX socs Adding new board files for DRA7XX socs. The pad registers layout is changed completely from OMAP5 So introducing the new structure here and also adding the minimal data. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Nishant Kamat <nskamat@ti.com> Signed-off-by: R Sricharan <r.sricharan@ti.com> Reviewed-by: Tom Rini <trini@ti.com> [trini: Adapt omap_mmc_init call for last 2 params] Signed-off-by: Tom Rini <trini@ti.com>
12 years ago
};
#endif /* _MUX_DATA_DRA7XX_H_ */