|
|
|
/*
|
|
|
|
* Copyright (C) Matrix Vision GmbH 2008
|
|
|
|
*
|
|
|
|
* Matrix Vision mvBlueLYNX-M7 configuration file
|
|
|
|
* based on Freescale's MPC8349ITX.
|
|
|
|
*
|
|
|
|
* See file CREDITS for list of people who contributed to this
|
|
|
|
* project.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU General Public License as
|
|
|
|
* published by the Free Software Foundation; either version 2 of
|
|
|
|
* the License, or (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
|
|
* MA 02111-1307 USA
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
|
|
#ifndef __CONFIG_H
|
|
|
|
#define __CONFIG_H
|
|
|
|
|
|
|
|
#include <version.h>
|
|
|
|
|
|
|
|
/*
|
|
|
|
* High Level Configuration Options
|
|
|
|
*/
|
|
|
|
#define CONFIG_E300 1
|
|
|
|
#define CONFIG_MPC83XX 1
|
|
|
|
#define CONFIG_MPC834X 1
|
|
|
|
#define CONFIG_MPC8343 1
|
|
|
|
|
|
|
|
#define CFG_IMMR 0xE0000000
|
|
|
|
|
|
|
|
#define CONFIG_PCI
|
|
|
|
#define CONFIG_83XX_GENERIC_PCI
|
|
|
|
#define CONFIG_PCI_SKIP_HOST_BRIDGE
|
|
|
|
#define CONFIG_HARD_I2C
|
|
|
|
#define CONFIG_TSEC_ENET
|
|
|
|
#define CONFIG_MPC8XXX_SPI
|
|
|
|
#define CONFIG_HARD_SPI
|
|
|
|
#define MVBLM7_MMC_CS 0x04000000
|
|
|
|
|
|
|
|
/* I2C */
|
|
|
|
#undef CONFIG_SOFT_I2C
|
|
|
|
|
|
|
|
#define CONFIG_FSL_I2C
|
|
|
|
#define CONFIG_I2C_MULTI_BUS
|
|
|
|
#define CONFIG_I2C_CMD_TREE
|
|
|
|
#define CFG_I2C_OFFSET 0x3000
|
|
|
|
#define CFG_I2C2_OFFSET 0x3100
|
|
|
|
|
|
|
|
#define CFG_I2C_SPEED 100000
|
|
|
|
#define CFG_I2C_SLAVE 0x7F
|
|
|
|
|
|
|
|
/*
|
|
|
|
* DDR Setup
|
|
|
|
*/
|
|
|
|
#define CFG_DDR_BASE 0x00000000
|
|
|
|
#define CFG_SDRAM_BASE CFG_DDR_BASE
|
|
|
|
#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
|
|
|
|
#define CFG_83XX_DDR_USES_CS0 1
|
|
|
|
#define CFG_MEMTEST_START (60<<20)
|
|
|
|
#define CFG_MEMTEST_END (70<<20)
|
|
|
|
|
|
|
|
#define CFG_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \
|
|
|
|
DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
|
|
|
|
|
|
|
|
#define CFG_DDR_SIZE 256
|
|
|
|
|
|
|
|
/* HC, 75Ohm, DDR-II, DRQ */
|
|
|
|
#define CFG_DDRCDR 0x80000001
|
|
|
|
/* EN, ODT_WR, 3BA, 14row, 10col */
|
|
|
|
#define CFG_DDR_CS0_CONFIG 0x80014102
|
|
|
|
#define CFG_DDR_CS1_CONFIG 0x0
|
|
|
|
#define CFG_DDR_CS2_CONFIG 0x0
|
|
|
|
#define CFG_DDR_CS3_CONFIG 0x0
|
|
|
|
|
|
|
|
#define CFG_DDR_CS0_BNDS 0x0000000f
|
|
|
|
#define CFG_DDR_CS1_BNDS 0x0
|
|
|
|
#define CFG_DDR_CS2_BNDS 0x0
|
|
|
|
#define CFG_DDR_CS3_BNDS 0x0
|
|
|
|
|
|
|
|
#define CFG_DDR_CLK_CNTL 0x02000000
|
|
|
|
|
|
|
|
#define CFG_DDR_TIMING_0 0x00260802
|
|
|
|
#define CFG_DDR_TIMING_1 0x2625b221
|
|
|
|
#define CFG_DDR_TIMING_2 0x1f9820c7
|
|
|
|
#define CFG_DDR_TIMING_3 0x00000000
|
|
|
|
|
|
|
|
/* ~MEM_EN, SREN, DDR-II, 32_BE */
|
|
|
|
#define CFG_DDR_SDRAM_CFG 0x43080000
|
|
|
|
#define CFG_DDR_SDRAM_CFG2 0x00401000
|
|
|
|
#define CFG_DDR_INTERVAL 0x04060100
|
|
|
|
|
|
|
|
#define CFG_DDR_MODE 0x078e0232
|
|
|
|
|
|
|
|
/* Flash */
|
|
|
|
#define CFG_FLASH_CFI
|
|
|
|
#define CONFIG_FLASH_CFI_DRIVER
|
|
|
|
#define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT
|
|
|
|
|
|
|
|
#define CFG_FLASH_BASE 0xFF800000
|
|
|
|
#define CFG_FLASH_SIZE 8
|
|
|
|
#define CFG_FLASH_SIZE_SHIFT 3
|
|
|
|
#define CFG_FLASH_EMPTY_INFO
|
|
|
|
#define CFG_FLASH_ERASE_TOUT 60000
|
|
|
|
#define CFG_FLASH_WRITE_TOUT 500
|
|
|
|
#define CFG_MAX_FLASH_BANKS 1
|
|
|
|
#define CFG_MAX_FLASH_SECT 256
|
|
|
|
|
|
|
|
#define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_PS_16 | BR_V)
|
|
|
|
#define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
|
|
|
|
OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS|\
|
|
|
|
OR_GPCM_SCY_15 | OR_GPCM_TRLX | OR_GPCM_EHTR | \
|
|
|
|
OR_GPCM_EAD)
|
|
|
|
#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE
|
|
|
|
#define CFG_LBLAWAR0_PRELIM (LBLAWAR_EN | (0x13 + CFG_FLASH_SIZE_SHIFT))
|
|
|
|
|
|
|
|
/*
|
|
|
|
* U-Boot memory configuration
|
|
|
|
*/
|
|
|
|
#define CFG_MONITOR_BASE TEXT_BASE
|
|
|
|
#undef CFG_RAMBOOT
|
|
|
|
|
|
|
|
#define CONFIG_L1_INIT_RAM
|
|
|
|
#define CFG_INIT_RAM_LOCK
|
|
|
|
#define CFG_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */
|
|
|
|
#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/
|
|
|
|
|
|
|
|
#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */
|
|
|
|
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
|
|
|
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
|
|
|
|
|
|
|
/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
|
|
|
|
#define CFG_MONITOR_LEN (512 * 1024)
|
|
|
|
#define CFG_MALLOC_LEN (512 * 1024)
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Local Bus LCRR and LBCR regs
|
|
|
|
* LCRR: DLL bypass, Clock divider is 4
|
|
|
|
* External Local Bus rate is
|
|
|
|
* CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
|
|
|
|
*/
|
|
|
|
#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_4)
|
|
|
|
#define CFG_LBC_LBCR 0x00000000
|
|
|
|
|
|
|
|
/* LB sdram refresh timer, about 6us */
|
|
|
|
#define CFG_LBC_LSRT 0x32000000
|
|
|
|
/* LB refresh timer prescal, 266MHz/32*/
|
|
|
|
#define CFG_LBC_MRTPR 0x20000000
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Serial Port
|
|
|
|
*/
|
|
|
|
#define CONFIG_CONS_INDEX 1
|
|
|
|
#undef CONFIG_SERIAL_SOFTWARE_FIFO
|
|
|
|
#define CFG_NS16550
|
|
|
|
#define CFG_NS16550_SERIAL
|
|
|
|
#define CFG_NS16550_REG_SIZE 1
|
|
|
|
#define CFG_NS16550_CLK get_bus_freq(0)
|
|
|
|
|
|
|
|
#define CFG_BAUDRATE_TABLE \
|
|
|
|
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
|
|
|
|
|
|
|
|
#define CONFIG_CONSOLE ttyS0
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
|
|
|
|
#define CFG_NS16550_COM1 (CFG_IMMR + 0x4500)
|
|
|
|
#define CFG_NS16550_COM2 (CFG_IMMR + 0x4600)
|
|
|
|
|
|
|
|
/* pass open firmware flat tree */
|
|
|
|
#define CONFIG_OF_LIBFDT 1
|
|
|
|
#define CONFIG_OF_BOARD_SETUP 1
|
|
|
|
#define CONFIG_OF_STDOUT_VIA_ALIAS 1
|
|
|
|
#define MV_DTB_NAME "mvblm7.dtb"
|
|
|
|
|
|
|
|
/*
|
|
|
|
* PCI
|
|
|
|
*/
|
|
|
|
#define CFG_PCI1_MEM_BASE 0x80000000
|
|
|
|
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
|
|
|
|
#define CFG_PCI1_MEM_SIZE 0x10000000
|
|
|
|
#define CFG_PCI1_MMIO_BASE (CFG_PCI1_MEM_BASE + CFG_PCI1_MEM_SIZE)
|
|
|
|
#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE
|
|
|
|
#define CFG_PCI1_MMIO_SIZE 0x10000000
|
|
|
|
#define CFG_PCI1_IO_BASE 0x00000000
|
|
|
|
#define CFG_PCI1_IO_PHYS 0xE2000000
|
|
|
|
#define CFG_PCI1_IO_SIZE 0x01000000
|
|
|
|
|
|
|
|
#define _IO_BASE 0x00000000
|
|
|
|
|
|
|
|
#define CONFIG_NET_MULTI 1
|
|
|
|
#define CONFIG_NET_RETRY_COUNT 3
|
|
|
|
|
|
|
|
#define PCI_66M
|
|
|
|
#define CONFIG_83XX_CLKIN 66666667
|
|
|
|
#define CONFIG_PCI_PNP
|
|
|
|
#define CONFIG_PCI_SCAN_SHOW
|
|
|
|
|
|
|
|
/* TSEC */
|
|
|
|
#define CONFIG_GMII
|
|
|
|
#define CFG_VSC8601_SKEWFIX
|
|
|
|
#define CFG_VSC8601_SKEW_TX 3
|
|
|
|
#define CFG_VSC8601_SKEW_RX 3
|
|
|
|
|
|
|
|
#define CONFIG_TSEC1
|
|
|
|
#define CONFIG_TSEC2
|
|
|
|
|
|
|
|
#define CONFIG_HAS_ETH0
|
|
|
|
#define CONFIG_TSEC1_NAME "TSEC0"
|
|
|
|
#define CONFIG_FEC1_PHY_NORXERR
|
|
|
|
#define CFG_TSEC1_OFFSET 0x24000
|
|
|
|
#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET)
|
|
|
|
#define TSEC1_PHY_ADDR 0x10
|
|
|
|
#define TSEC1_PHYIDX 0
|
|
|
|
#define TSEC1_FLAGS (TSEC_GIGABIT|TSEC_REDUCED)
|
|
|
|
|
|
|
|
#define CONFIG_HAS_ETH1
|
|
|
|
#define CONFIG_TSEC2_NAME "TSEC1"
|
|
|
|
#define CONFIG_FEC2_PHY_NORXERR
|
|
|
|
#define CFG_TSEC2_OFFSET 0x25000
|
|
|
|
#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET)
|
|
|
|
#define TSEC2_PHY_ADDR 0x11
|
|
|
|
#define TSEC2_PHYIDX 0
|
|
|
|
#define TSEC2_FLAGS (TSEC_GIGABIT|TSEC_REDUCED)
|
|
|
|
|
|
|
|
#define CONFIG_ETHPRIME "TSEC0"
|
|
|
|
|
|
|
|
#define CONFIG_BOOTP_VENDOREX
|
|
|
|
#define CONFIG_BOOTP_SUBNETMASK
|
|
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
|
|
#define CONFIG_BOOTP_DNS
|
|
|
|
#define CONFIG_BOOTP_DNS2
|
|
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
|
|
#define CONFIG_BOOTP_NTPSERVER
|
|
|
|
#define CONFIG_BOOTP_RANDOM_DELAY
|
|
|
|
#define CONFIG_BOOTP_SEND_HOSTNAME
|
|
|
|
|
|
|
|
/* USB */
|
|
|
|
#define CONFIG_HAS_FSL_DR_USB
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Environment
|
|
|
|
*/
|
|
|
|
#undef CFG_FLASH_PROTECTION
|
|
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
|
|
|
|
#define CFG_ENV_IS_IN_FLASH 1
|
|
|
|
#define CFG_ENV_ADDR 0xFF800000
|
|
|
|
#define CFG_ENV_SIZE 0x2000
|
|
|
|
#define CFG_ENV_SECT_SIZE 0x2000
|
|
|
|
#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR+CFG_ENV_SIZE)
|
|
|
|
#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE
|
|
|
|
|
|
|
|
#define CONFIG_LOADS_ECHO
|
|
|
|
#define CFG_LOADS_BAUD_CHANGE
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Command line configuration.
|
|
|
|
*/
|
|
|
|
#include <config_cmd_default.h>
|
|
|
|
|
|
|
|
#define CONFIG_CMD_CACHE
|
|
|
|
#define CONFIG_CMD_IRQ
|
|
|
|
#define CONFIG_CMD_NET
|
|
|
|
#define CONFIG_CMD_MII
|
|
|
|
#define CONFIG_CMD_PING
|
|
|
|
#define CONFIG_CMD_DHCP
|
|
|
|
#define CONFIG_CMD_SDRAM
|
|
|
|
#define CONFIG_CMD_PCI
|
|
|
|
#define CONFIG_CMD_I2C
|
|
|
|
#define CONFIG_CMD_FPGA
|
|
|
|
|
|
|
|
#undef CONFIG_WATCHDOG
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Miscellaneous configurable options
|
|
|
|
*/
|
|
|
|
#define CFG_LONGHELP
|
|
|
|
#define CONFIG_CMDLINE_EDITING
|
|
|
|
#define CFG_HUSH_PARSER
|
|
|
|
#define CFG_PROMPT_HUSH_PS2 "> "
|
|
|
|
|
|
|
|
/* default load address */
|
|
|
|
#define CFG_LOAD_ADDR 0x2000000
|
|
|
|
/* default location for tftp and bootm */
|
|
|
|
#define CONFIG_LOADADDR 0x200000
|
|
|
|
|
|
|
|
#define CFG_PROMPT "mvBL-M7> "
|
|
|
|
#define CFG_CBSIZE 256
|
|
|
|
|
|
|
|
#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
|
|
|
|
#define CFG_MAXARGS 16
|
|
|
|
#define CFG_BARGSIZE CFG_CBSIZE
|
|
|
|
#define CFG_HZ 1000
|
|
|
|
|
|
|
|
/*
|
|
|
|
* For booting Linux, the board info and command line data
|
|
|
|
* have to be in the first 8 MB of memory, since this is
|
|
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
|
|
*/
|
|
|
|
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
|
|
|
|
|
|
|
|
#define CFG_HRCW_LOW 0x0
|
|
|
|
#define CFG_HRCW_HIGH 0x0
|
|
|
|
|
|
|
|
/*
|
|
|
|
* System performance
|
|
|
|
*/
|
|
|
|
#define CFG_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */
|
|
|
|
#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */
|
|
|
|
#define CFG_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */
|
|
|
|
#define CFG_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */
|
|
|
|
|
|
|
|
/* clocking */
|
|
|
|
#define CFG_SCCR_ENCCM 0
|
|
|
|
#define CFG_SCCR_USBMPHCM 0
|
|
|
|
#define CFG_SCCR_USBDRCM 2
|
|
|
|
#define CFG_SCCR_TSEC1CM 1
|
|
|
|
#define CFG_SCCR_TSEC2CM 1
|
|
|
|
|
|
|
|
#define CFG_SICRH 0x1fff8003
|
|
|
|
#define CFG_SICRL (SICRL_LDP_A | SICRL_USB1 | SICRL_USB0)
|
|
|
|
|
|
|
|
#define CFG_HID0_INIT 0x000000000
|
|
|
|
#define CFG_HID0_FINAL CFG_HID0_INIT
|
|
|
|
|
|
|
|
#define CFG_HID2 HID2_HBE
|
|
|
|
#define CONFIG_HIGH_BATS 1
|
|
|
|
|
|
|
|
/* DDR */
|
|
|
|
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
|
|
|
|
#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
|
|
|
|
|
|
/* PCI */
|
|
|
|
#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
|
|
|
|
#define CFG_IBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
|
|
#define CFG_IBAT2L (CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT |\
|
|
|
|
BATL_GUARDEDSTORAGE)
|
|
|
|
#define CFG_IBAT2U (CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
|
|
|
|
|
|
/* no PCI2 */
|
|
|
|
#define CFG_IBAT3L 0
|
|
|
|
#define CFG_IBAT3U 0
|
|
|
|
#define CFG_IBAT4L 0
|
|
|
|
#define CFG_IBAT4U 0
|
|
|
|
|
|
|
|
/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
|
|
|
|
#define CFG_IBAT5L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | \
|
|
|
|
BATL_GUARDEDSTORAGE)
|
|
|
|
#define CFG_IBAT5U (CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
|
|
|
|
|
|
/* stack in DCACHE 0xFDF00000 & FLASH @ 0xFF800000 */
|
|
|
|
#define CFG_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
|
|
|
|
#define CFG_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
|
|
#define CFG_IBAT7L 0
|
|
|
|
#define CFG_IBAT7U 0
|
|
|
|
|
|
|
|
#define CFG_DBAT0L CFG_IBAT0L
|
|
|
|
#define CFG_DBAT0U CFG_IBAT0U
|
|
|
|
#define CFG_DBAT1L CFG_IBAT1L
|
|
|
|
#define CFG_DBAT1U CFG_IBAT1U
|
|
|
|
#define CFG_DBAT2L CFG_IBAT2L
|
|
|
|
#define CFG_DBAT2U CFG_IBAT2U
|
|
|
|
#define CFG_DBAT3L CFG_IBAT3L
|
|
|
|
#define CFG_DBAT3U CFG_IBAT3U
|
|
|
|
#define CFG_DBAT4L CFG_IBAT4L
|
|
|
|
#define CFG_DBAT4U CFG_IBAT4U
|
|
|
|
#define CFG_DBAT5L CFG_IBAT5L
|
|
|
|
#define CFG_DBAT5U CFG_IBAT5U
|
|
|
|
#define CFG_DBAT6L CFG_IBAT6L
|
|
|
|
#define CFG_DBAT6U CFG_IBAT6U
|
|
|
|
#define CFG_DBAT7L CFG_IBAT7L
|
|
|
|
#define CFG_DBAT7U CFG_IBAT7U
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Internal Definitions
|
|
|
|
*
|
|
|
|
* Boot Flags
|
|
|
|
*/
|
|
|
|
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
|
|
|
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Environment Configuration
|
|
|
|
*/
|
|
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
|
|
|
|
#define CONFIG_NETDEV eth0
|
|
|
|
|
|
|
|
/* Default path and filenames */
|
|
|
|
#define CONFIG_BOOTDELAY 5
|
|
|
|
#define CONFIG_AUTOBOOT_KEYED
|
|
|
|
#define CONFIG_AUTOBOOT_STOP_STR "s"
|
|
|
|
#define CONFIG_ZERO_BOOTDELAY_CHECK
|
|
|
|
#define CONFIG_RESET_TO_RETRY 1000
|
|
|
|
|
|
|
|
#define MV_CI mvBL-M7
|
|
|
|
#define MV_VCI mvBL-M7
|
|
|
|
#define MV_FPGA_DATA 0xfff80000
|
|
|
|
#define MV_FPGA_SIZE 0x00076ca2
|
|
|
|
#define MV_KERNEL_ADDR 0xff810000
|
|
|
|
#define MV_INITRD_ADDR 0xffb00000
|
|
|
|
#define MV_AUTOSCR_ADDR 0xff804000
|
|
|
|
#define MV_AUTOSCR_ADDR2 0xff806000
|
|
|
|
#define MV_DTB_ADDR 0xff808000
|
|
|
|
#define MV_INITRD_LENGTH 0x00400000
|
|
|
|
|
|
|
|
#define CONFIG_SHOW_BOOT_PROGRESS 1
|
|
|
|
|
|
|
|
#define MV_KERNEL_ADDR_RAM 0x00100000
|
|
|
|
#define MV_DTB_ADDR_RAM 0x00600000
|
|
|
|
#define MV_INITRD_ADDR_RAM 0x01000000
|
|
|
|
|
|
|
|
#define CONFIG_BOOTCOMMAND "if imi ${autoscr_addr}; \
|
|
|
|
then autoscr ${autoscr_addr}; \
|
|
|
|
else autoscr ${autoscr_addr2}; \
|
|
|
|
fi;"
|
|
|
|
#define CONFIG_BOOTARGS "root=/dev/ram ro rootfstype=squashfs"
|
|
|
|
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
|
|
"console_nr=0\0" \
|
|
|
|
"baudrate=" MK_STR(CONFIG_BAUDRATE) "\0" \
|
|
|
|
"stdin=serial\0" \
|
|
|
|
"stdout=serial\0" \
|
|
|
|
"stderr=serial\0" \
|
|
|
|
"fpga=0\0" \
|
|
|
|
"fpgadata=" MK_STR(MV_FPGA_DATA) "\0" \
|
|
|
|
"fpgadatasize=" MK_STR(MV_FPGA_SIZE) "\0" \
|
|
|
|
"autoscr_addr=" MK_STR(MV_AUTOSCR_ADDR) "\0" \
|
|
|
|
"autoscr_addr2=" MK_STR(MV_AUTOSCR_ADDR2) "\0" \
|
|
|
|
"mv_kernel_addr=" MK_STR(MV_KERNEL_ADDR) "\0" \
|
|
|
|
"mv_kernel_addr_ram=" MK_STR(MV_KERNEL_ADDR_RAM) "\0" \
|
|
|
|
"mv_initrd_addr=" MK_STR(MV_INITRD_ADDR) "\0" \
|
|
|
|
"mv_initrd_addr_ram=" MK_STR(MV_INITRD_ADDR_RAM) "\0" \
|
|
|
|
"mv_initrd_length=" MK_STR(MV_INITRD_LENGTH) "\0" \
|
|
|
|
"mv_dtb_addr=" MK_STR(MV_DTB_ADDR) "\0" \
|
|
|
|
"mv_dtb_addr_ram=" MK_STR(MV_DTB_ADDR_RAM) "\0" \
|
|
|
|
"dtb_name=" MK_STR(MV_DTB_NAME) "\0" \
|
|
|
|
"mv_version=" U_BOOT_VERSION "\0" \
|
|
|
|
"dhcp_client_id=" MK_STR(MV_CI) "\0" \
|
|
|
|
"dhcp_vendor-class-identifier=" MK_STR(MV_VCI) "\0" \
|
|
|
|
"netretry=no\0" \
|
|
|
|
"use_static_ipaddr=no\0" \
|
|
|
|
"static_ipaddr=192.168.90.10\0" \
|
|
|
|
"static_netmask=255.255.255.0\0" \
|
|
|
|
"static_gateway=0.0.0.0\0" \
|
|
|
|
"initrd_name=uInitrd.mvblm7-xenorfs\0" \
|
|
|
|
"zcip=no\0" \
|
|
|
|
"netboot=yes\0" \
|
|
|
|
"mvtest=Ff\0" \
|
|
|
|
"tried_bootfromflash=no\0" \
|
|
|
|
"tried_bootfromnet=no\0" \
|
|
|
|
"bootfile=mvblm72625.boot\0" \
|
|
|
|
"use_dhcp=yes\0" \
|
|
|
|
"gev_start=yes\0" \
|
|
|
|
"mvbcdma_debug=0\0" \
|
|
|
|
"mvbcia_debug=0\0" \
|
|
|
|
"propdev_debug=0\0" \
|
|
|
|
"gevss_debug=0\0" \
|
|
|
|
"watchdog=0\0" \
|
|
|
|
"usb_dr_mode=host\0" \
|
|
|
|
"sensor_cnt=2\0" \
|
|
|
|
""
|
|
|
|
|
|
|
|
#define CONFIG_FPGA_COUNT 1
|
|
|
|
#define CONFIG_FPGA CFG_ALTERA_CYCLON2
|
|
|
|
#define CONFIG_FPGA_ALTERA
|
|
|
|
#define CONFIG_FPGA_CYCLON2
|
|
|
|
|
|
|
|
#endif
|