upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/drivers/ddr/marvell/axp/ddr3_axp_mc_static.h

285 lines
11 KiB

arm: mvebu: drivers/ddr: Add DDR3 driver with training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the AXP boot image. Not linked with the main U-Boot. With this code addition and the following serdes/PHY setup code, the Armada-XP support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Hopefully other MVEBU SoC's will follow here. Support for some SoC's has been removed in this version. This is: MV_MSYS: The code referred to by the MV_MSYS define is currently unused. And its not really planned to support this in mainline. So lets remove it to make the code clearer and increase the readability. MV88F68XX (A38x): The code referred to by the MV88F68XX define (A38x) is currently unused. And its partial and not sufficient for this device in this stage. So lets remove it to make the code clearer and increase the readability. MV88F66XX (ALP): The code referred to by the MV88F66XX define is currently unused. And its not really planned to support this in mainline. So lets remove it to make the code clearer and increase the readability. MV88F78X60_Z1: The code referred to by the MV88F78X60_Z1 define is currently unused. As the Z1 revision of the AXP is not supported in mainline anymore. So lets remove it to make the code clearer and increase the readability. Remove support for Z1 & A0 AXP revisions (steppings). The current stepping is B0 and this is the only one that is actively supported in this code version. Tested on AXP using a SPD DIMM setup on the Marvell DB-MV784MP-GP board and on a custom fixed DDR configuration board (maxbcm). Note: This code has undergone many hours of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. This might be some task to tackly later on. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
10 years ago
/*
* Copyright (C) Marvell International Ltd. and its affiliates
*
* SPDX-License-Identifier: GPL-2.0
*/
#ifndef __AXP_MC_STATIC_H
#define __AXP_MC_STATIC_H
MV_DRAM_MC_INIT ddr3_A0_db_667[MV_MAX_DDR3_STATIC_SIZE] = {
#ifdef CONFIG_DDR_32BIT
arm: mvebu: drivers/ddr: Add DDR3 driver with training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the AXP boot image. Not linked with the main U-Boot. With this code addition and the following serdes/PHY setup code, the Armada-XP support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Hopefully other MVEBU SoC's will follow here. Support for some SoC's has been removed in this version. This is: MV_MSYS: The code referred to by the MV_MSYS define is currently unused. And its not really planned to support this in mainline. So lets remove it to make the code clearer and increase the readability. MV88F68XX (A38x): The code referred to by the MV88F68XX define (A38x) is currently unused. And its partial and not sufficient for this device in this stage. So lets remove it to make the code clearer and increase the readability. MV88F66XX (ALP): The code referred to by the MV88F66XX define is currently unused. And its not really planned to support this in mainline. So lets remove it to make the code clearer and increase the readability. MV88F78X60_Z1: The code referred to by the MV88F78X60_Z1 define is currently unused. As the Z1 revision of the AXP is not supported in mainline anymore. So lets remove it to make the code clearer and increase the readability. Remove support for Z1 & A0 AXP revisions (steppings). The current stepping is B0 and this is the only one that is actively supported in this code version. Tested on AXP using a SPD DIMM setup on the Marvell DB-MV784MP-GP board and on a custom fixed DDR configuration board (maxbcm). Note: This code has undergone many hours of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. This might be some task to tackly later on. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
10 years ago
{0x00001400, 0x7301c924}, /*DDR SDRAM Configuration Register */
#else /*CONFIG_DDR_64BIT */
arm: mvebu: drivers/ddr: Add DDR3 driver with training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the AXP boot image. Not linked with the main U-Boot. With this code addition and the following serdes/PHY setup code, the Armada-XP support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Hopefully other MVEBU SoC's will follow here. Support for some SoC's has been removed in this version. This is: MV_MSYS: The code referred to by the MV_MSYS define is currently unused. And its not really planned to support this in mainline. So lets remove it to make the code clearer and increase the readability. MV88F68XX (A38x): The code referred to by the MV88F68XX define (A38x) is currently unused. And its partial and not sufficient for this device in this stage. So lets remove it to make the code clearer and increase the readability. MV88F66XX (ALP): The code referred to by the MV88F66XX define is currently unused. And its not really planned to support this in mainline. So lets remove it to make the code clearer and increase the readability. MV88F78X60_Z1: The code referred to by the MV88F78X60_Z1 define is currently unused. As the Z1 revision of the AXP is not supported in mainline anymore. So lets remove it to make the code clearer and increase the readability. Remove support for Z1 & A0 AXP revisions (steppings). The current stepping is B0 and this is the only one that is actively supported in this code version. Tested on AXP using a SPD DIMM setup on the Marvell DB-MV784MP-GP board and on a custom fixed DDR configuration board (maxbcm). Note: This code has undergone many hours of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. This might be some task to tackly later on. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
10 years ago
{0x00001400, 0x7301CA28}, /*DDR SDRAM Configuration Register */
#endif
{0x00001404, 0x3630b800}, /*Dunit Control Low Register */
{0x00001408, 0x43149775}, /*DDR SDRAM Timing (Low) Register */
/* {0x0000140C, 0x38000C6A}, *//*DDR SDRAM Timing (High) Register */
{0x0000140C, 0x38d83fe0}, /*DDR SDRAM Timing (High) Register */
#ifdef DB_78X60_PCAC
{0x00001410, 0x040F0001}, /*DDR SDRAM Address Control Register */
#else
{0x00001410, 0x040F0000}, /*DDR SDRAM Open Pages Control Register */
#endif
{0x00001414, 0x00000000}, /*DDR SDRAM Open Pages Control Register */
{0x00001418, 0x00000e00}, /*DDR SDRAM Operation Register */
{0x00001420, 0x00000004}, /*DDR SDRAM Extended Mode Register */
{0x00001424, 0x0000D3FF}, /*Dunit Control High Register */
{0x00001428, 0x000F8830}, /*Dunit Control High Register */
{0x0000142C, 0x214C2F38}, /*Dunit Control High Register */
{0x0000147C, 0x0000c671},
{0x000014a0, 0x000002A9},
{0x000014a8, 0x00000101}, /*2:1 */
{0x00020220, 0x00000007},
{0x00001494, 0x00010000}, /*DDR SDRAM ODT Control (Low) Register */
{0x00001498, 0x00000000}, /*DDR SDRAM ODT Control (High) Register */
{0x0000149C, 0x00000301}, /*DDR Dunit ODT Control Register */
{0x000014C0, 0x192434e9}, /* DRAM address and Control Driving Strenght */
{0x000014C4, 0x092434e9}, /* DRAM Data and DQS Driving Strenght */
{0x000200e8, 0x3FFF0E01}, /* DO NOT Modify - Open Mbus Window - 2G - Mbus is required for the training sequence */
{0x00020184, 0x3FFFFFE0}, /* DO NOT Modify - Close fast path Window to - 2G */
{0x0001504, 0x7FFFFFF1}, /* CS0 Size */
{0x000150C, 0x00000000}, /* CS1 Size */
{0x0001514, 0x00000000}, /* CS2 Size */
{0x000151C, 0x00000000}, /* CS3 Size */
/* {0x00001524, 0x0000C800}, */
{0x00001538, 0x0000000b}, /*Read Data Sample Delays Register */
{0x0000153C, 0x0000000d}, /*Read Data Ready Delay Register */
{0x000015D0, 0x00000640}, /*MR0 */
{0x000015D4, 0x00000046}, /*MR1 */
{0x000015D8, 0x00000010}, /*MR2 */
{0x000015DC, 0x00000000}, /*MR3 */
{0x000015E4, 0x00203c18}, /*ZQC Configuration Register */
{0x000015EC, 0xd800aa25}, /*DDR PHY */
{0x0, 0x0}
};
MV_DRAM_MC_INIT ddr3_A0_AMC_667[MV_MAX_DDR3_STATIC_SIZE] = {
#ifdef CONFIG_DDR_32BIT
arm: mvebu: drivers/ddr: Add DDR3 driver with training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the AXP boot image. Not linked with the main U-Boot. With this code addition and the following serdes/PHY setup code, the Armada-XP support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Hopefully other MVEBU SoC's will follow here. Support for some SoC's has been removed in this version. This is: MV_MSYS: The code referred to by the MV_MSYS define is currently unused. And its not really planned to support this in mainline. So lets remove it to make the code clearer and increase the readability. MV88F68XX (A38x): The code referred to by the MV88F68XX define (A38x) is currently unused. And its partial and not sufficient for this device in this stage. So lets remove it to make the code clearer and increase the readability. MV88F66XX (ALP): The code referred to by the MV88F66XX define is currently unused. And its not really planned to support this in mainline. So lets remove it to make the code clearer and increase the readability. MV88F78X60_Z1: The code referred to by the MV88F78X60_Z1 define is currently unused. As the Z1 revision of the AXP is not supported in mainline anymore. So lets remove it to make the code clearer and increase the readability. Remove support for Z1 & A0 AXP revisions (steppings). The current stepping is B0 and this is the only one that is actively supported in this code version. Tested on AXP using a SPD DIMM setup on the Marvell DB-MV784MP-GP board and on a custom fixed DDR configuration board (maxbcm). Note: This code has undergone many hours of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. This might be some task to tackly later on. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
10 years ago
{0x00001400, 0x7301c924}, /*DDR SDRAM Configuration Register */
#else /*CONFIG_DDR_64BIT */
arm: mvebu: drivers/ddr: Add DDR3 driver with training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the AXP boot image. Not linked with the main U-Boot. With this code addition and the following serdes/PHY setup code, the Armada-XP support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Hopefully other MVEBU SoC's will follow here. Support for some SoC's has been removed in this version. This is: MV_MSYS: The code referred to by the MV_MSYS define is currently unused. And its not really planned to support this in mainline. So lets remove it to make the code clearer and increase the readability. MV88F68XX (A38x): The code referred to by the MV88F68XX define (A38x) is currently unused. And its partial and not sufficient for this device in this stage. So lets remove it to make the code clearer and increase the readability. MV88F66XX (ALP): The code referred to by the MV88F66XX define is currently unused. And its not really planned to support this in mainline. So lets remove it to make the code clearer and increase the readability. MV88F78X60_Z1: The code referred to by the MV88F78X60_Z1 define is currently unused. As the Z1 revision of the AXP is not supported in mainline anymore. So lets remove it to make the code clearer and increase the readability. Remove support for Z1 & A0 AXP revisions (steppings). The current stepping is B0 and this is the only one that is actively supported in this code version. Tested on AXP using a SPD DIMM setup on the Marvell DB-MV784MP-GP board and on a custom fixed DDR configuration board (maxbcm). Note: This code has undergone many hours of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. This might be some task to tackly later on. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
10 years ago
{0x00001400, 0x7301CA28}, /*DDR SDRAM Configuration Register */
#endif
{0x00001404, 0x3630b800}, /*Dunit Control Low Register */
{0x00001408, 0x43149775}, /*DDR SDRAM Timing (Low) Register */
/* {0x0000140C, 0x38000C6A}, *//*DDR SDRAM Timing (High) Register */
{0x0000140C, 0x38d83fe0}, /*DDR SDRAM Timing (High) Register */
#ifdef DB_78X60_PCAC
{0x00001410, 0x040F0001}, /*DDR SDRAM Address Control Register */
#else
{0x00001410, 0x040F000C}, /*DDR SDRAM Open Pages Control Register */
#endif
{0x00001414, 0x00000000}, /*DDR SDRAM Open Pages Control Register */
{0x00001418, 0x00000e00}, /*DDR SDRAM Operation Register */
{0x00001420, 0x00000004}, /*DDR SDRAM Extended Mode Register */
{0x00001424, 0x0000D3FF}, /*Dunit Control High Register */
{0x00001428, 0x000F8830}, /*Dunit Control High Register */
{0x0000142C, 0x214C2F38}, /*Dunit Control High Register */
{0x0000147C, 0x0000c671},
{0x000014a0, 0x000002A9},
{0x000014a8, 0x00000101}, /*2:1 */
{0x00020220, 0x00000007},
{0x00001494, 0x00010000}, /*DDR SDRAM ODT Control (Low) Register */
{0x00001498, 0x00000000}, /*DDR SDRAM ODT Control (High) Register */
{0x0000149C, 0x00000301}, /*DDR Dunit ODT Control Register */
{0x000014C0, 0x192434e9}, /* DRAM address and Control Driving Strenght */
{0x000014C4, 0x092434e9}, /* DRAM Data and DQS Driving Strenght */
{0x000200e8, 0x3FFF0E01}, /* DO NOT Modify - Open Mbus Window - 2G - Mbus is required for the training sequence */
{0x00020184, 0x3FFFFFE0}, /* DO NOT Modify - Close fast path Window to - 2G */
{0x0001504, 0x3FFFFFF1}, /* CS0 Size */
{0x000150C, 0x00000000}, /* CS1 Size */
{0x0001514, 0x00000000}, /* CS2 Size */
{0x000151C, 0x00000000}, /* CS3 Size */
/* {0x00001524, 0x0000C800}, */
{0x00001538, 0x0000000b}, /*Read Data Sample Delays Register */
{0x0000153C, 0x0000000d}, /*Read Data Ready Delay Register */
{0x000015D0, 0x00000640}, /*MR0 */
{0x000015D4, 0x00000046}, /*MR1 */
{0x000015D8, 0x00000010}, /*MR2 */
{0x000015DC, 0x00000000}, /*MR3 */
{0x000015E4, 0x00203c18}, /*ZQC Configuration Register */
{0x000015EC, 0xd800aa25}, /*DDR PHY */
{0x0, 0x0}
};
MV_DRAM_MC_INIT ddr3_A0_db_400[MV_MAX_DDR3_STATIC_SIZE] = {
#ifdef CONFIG_DDR_32BIT
arm: mvebu: drivers/ddr: Add DDR3 driver with training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the AXP boot image. Not linked with the main U-Boot. With this code addition and the following serdes/PHY setup code, the Armada-XP support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Hopefully other MVEBU SoC's will follow here. Support for some SoC's has been removed in this version. This is: MV_MSYS: The code referred to by the MV_MSYS define is currently unused. And its not really planned to support this in mainline. So lets remove it to make the code clearer and increase the readability. MV88F68XX (A38x): The code referred to by the MV88F68XX define (A38x) is currently unused. And its partial and not sufficient for this device in this stage. So lets remove it to make the code clearer and increase the readability. MV88F66XX (ALP): The code referred to by the MV88F66XX define is currently unused. And its not really planned to support this in mainline. So lets remove it to make the code clearer and increase the readability. MV88F78X60_Z1: The code referred to by the MV88F78X60_Z1 define is currently unused. As the Z1 revision of the AXP is not supported in mainline anymore. So lets remove it to make the code clearer and increase the readability. Remove support for Z1 & A0 AXP revisions (steppings). The current stepping is B0 and this is the only one that is actively supported in this code version. Tested on AXP using a SPD DIMM setup on the Marvell DB-MV784MP-GP board and on a custom fixed DDR configuration board (maxbcm). Note: This code has undergone many hours of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. This might be some task to tackly later on. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
10 years ago
{0x00001400, 0x73004C30}, /*DDR SDRAM Configuration Register */
#else /* CONFIG_DDR_64BIT */
arm: mvebu: drivers/ddr: Add DDR3 driver with training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the AXP boot image. Not linked with the main U-Boot. With this code addition and the following serdes/PHY setup code, the Armada-XP support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Hopefully other MVEBU SoC's will follow here. Support for some SoC's has been removed in this version. This is: MV_MSYS: The code referred to by the MV_MSYS define is currently unused. And its not really planned to support this in mainline. So lets remove it to make the code clearer and increase the readability. MV88F68XX (A38x): The code referred to by the MV88F68XX define (A38x) is currently unused. And its partial and not sufficient for this device in this stage. So lets remove it to make the code clearer and increase the readability. MV88F66XX (ALP): The code referred to by the MV88F66XX define is currently unused. And its not really planned to support this in mainline. So lets remove it to make the code clearer and increase the readability. MV88F78X60_Z1: The code referred to by the MV88F78X60_Z1 define is currently unused. As the Z1 revision of the AXP is not supported in mainline anymore. So lets remove it to make the code clearer and increase the readability. Remove support for Z1 & A0 AXP revisions (steppings). The current stepping is B0 and this is the only one that is actively supported in this code version. Tested on AXP using a SPD DIMM setup on the Marvell DB-MV784MP-GP board and on a custom fixed DDR configuration board (maxbcm). Note: This code has undergone many hours of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. This might be some task to tackly later on. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
10 years ago
{0x00001400, 0x7300CC30}, /*DDR SDRAM Configuration Register */
#endif
{0x00001404, 0x3630B840}, /*Dunit Control Low Register */
{0x00001408, 0x33137663}, /*DDR SDRAM Timing (Low) Register */
{0x0000140C, 0x38000C55}, /*DDR SDRAM Timing (High) Register */
{0x00001410, 0x040F0000}, /*DDR SDRAM Address Control Register */
{0x00001414, 0x00000000}, /*DDR SDRAM Open Pages Control Register */
{0x00001418, 0x00000e00}, /*DDR SDRAM Operation Register */
{0x0000141C, 0x00000672}, /*DDR SDRAM Mode Register */
{0x00001420, 0x00000004}, /*DDR SDRAM Extended Mode Register */
{0x00001424, 0x0100D3FF}, /*Dunit Control High Register */
{0x00001428, 0x000D6720}, /*Dunit Control High Register */
{0x0000142C, 0x014C2F38}, /*Dunit Control High Register */
{0x0000147C, 0x00006571},
{0x00001494, 0x00010000}, /*DDR SDRAM ODT Control (Low) Register */
{0x00001498, 0x00000000}, /*DDR SDRAM ODT Control (High) Register */
{0x0000149C, 0x00000301}, /*DDR Dunit ODT Control Register */
{0x000014a0, 0x000002A9},
{0x000014a8, 0x00000101}, /*2:1 */
{0x00020220, 0x00000007},
{0x000014C0, 0x192424C8}, /* DRAM address and Control Driving Strenght */
{0x000014C4, 0xEFB24C8}, /* DRAM Data and DQS Driving Strenght */
{0x000200e8, 0x3FFF0E01}, /* DO NOT Modify - Open Mbus Window - 2G - Mbus is required for the training sequence */
{0x00020184, 0x3FFFFFE0}, /* DO NOT Modify - Close fast path Window to - 2G */
{0x0001504, 0x7FFFFFF1}, /* CS0 Size */
{0x000150C, 0x00000000}, /* CS1 Size */
{0x0001514, 0x00000000}, /* CS2 Size */
{0x000151C, 0x00000000}, /* CS3 Size */
{0x00001538, 0x00000008}, /*Read Data Sample Delays Register */
{0x0000153C, 0x0000000A}, /*Read Data Ready Delay Register */
{0x000015D0, 0x00000630}, /*MR0 */
{0x000015D4, 0x00000046}, /*MR1 */
{0x000015D8, 0x00000008}, /*MR2 */
{0x000015DC, 0x00000000}, /*MR3 */
{0x000015E4, 0x00203c18}, /*ZQDS Configuration Register */
/* {0x000015EC, 0xDE000025}, *//*DDR PHY */
{0x000015EC, 0xF800AA25}, /*DDR PHY */
{0x0, 0x0}
};
MV_DRAM_MC_INIT ddr3_Z1_db_600[MV_MAX_DDR3_STATIC_SIZE] = {
#ifdef CONFIG_DDR_32BIT
arm: mvebu: drivers/ddr: Add DDR3 driver with training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the AXP boot image. Not linked with the main U-Boot. With this code addition and the following serdes/PHY setup code, the Armada-XP support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Hopefully other MVEBU SoC's will follow here. Support for some SoC's has been removed in this version. This is: MV_MSYS: The code referred to by the MV_MSYS define is currently unused. And its not really planned to support this in mainline. So lets remove it to make the code clearer and increase the readability. MV88F68XX (A38x): The code referred to by the MV88F68XX define (A38x) is currently unused. And its partial and not sufficient for this device in this stage. So lets remove it to make the code clearer and increase the readability. MV88F66XX (ALP): The code referred to by the MV88F66XX define is currently unused. And its not really planned to support this in mainline. So lets remove it to make the code clearer and increase the readability. MV88F78X60_Z1: The code referred to by the MV88F78X60_Z1 define is currently unused. As the Z1 revision of the AXP is not supported in mainline anymore. So lets remove it to make the code clearer and increase the readability. Remove support for Z1 & A0 AXP revisions (steppings). The current stepping is B0 and this is the only one that is actively supported in this code version. Tested on AXP using a SPD DIMM setup on the Marvell DB-MV784MP-GP board and on a custom fixed DDR configuration board (maxbcm). Note: This code has undergone many hours of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. This might be some task to tackly later on. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
10 years ago
{0x00001400, 0x73014A28}, /*DDR SDRAM Configuration Register */
#else /*CONFIG_DDR_64BIT */
arm: mvebu: drivers/ddr: Add DDR3 driver with training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the AXP boot image. Not linked with the main U-Boot. With this code addition and the following serdes/PHY setup code, the Armada-XP support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Hopefully other MVEBU SoC's will follow here. Support for some SoC's has been removed in this version. This is: MV_MSYS: The code referred to by the MV_MSYS define is currently unused. And its not really planned to support this in mainline. So lets remove it to make the code clearer and increase the readability. MV88F68XX (A38x): The code referred to by the MV88F68XX define (A38x) is currently unused. And its partial and not sufficient for this device in this stage. So lets remove it to make the code clearer and increase the readability. MV88F66XX (ALP): The code referred to by the MV88F66XX define is currently unused. And its not really planned to support this in mainline. So lets remove it to make the code clearer and increase the readability. MV88F78X60_Z1: The code referred to by the MV88F78X60_Z1 define is currently unused. As the Z1 revision of the AXP is not supported in mainline anymore. So lets remove it to make the code clearer and increase the readability. Remove support for Z1 & A0 AXP revisions (steppings). The current stepping is B0 and this is the only one that is actively supported in this code version. Tested on AXP using a SPD DIMM setup on the Marvell DB-MV784MP-GP board and on a custom fixed DDR configuration board (maxbcm). Note: This code has undergone many hours of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. This might be some task to tackly later on. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
10 years ago
{0x00001400, 0x7301CA28}, /*DDR SDRAM Configuration Register */
#endif
{0x00001404, 0x3630B040}, /*Dunit Control Low Register */
{0x00001408, 0x44149887}, /*DDR SDRAM Timing (Low) Register */
/* {0x0000140C, 0x38000C6A}, *//*DDR SDRAM Timing (High) Register */
{0x0000140C, 0x38D83FE0}, /*DDR SDRAM Timing (High) Register */
#ifdef DB_78X60_PCAC
{0x00001410, 0x040F0001}, /*DDR SDRAM Address Control Register */
#else
{0x00001410, 0x040F0000}, /*DDR SDRAM Open Pages Control Register */
#endif
{0x00001414, 0x00000000}, /*DDR SDRAM Open Pages Control Register */
{0x00001418, 0x00000e00}, /*DDR SDRAM Operation Register */
{0x00001420, 0x00000004}, /*DDR SDRAM Extended Mode Register */
{0x00001424, 0x0100D1FF}, /*Dunit Control High Register */
{0x00001428, 0x000F8830}, /*Dunit Control High Register */
{0x0000142C, 0x214C2F38}, /*Dunit Control High Register */
{0x0000147C, 0x0000c671},
{0x000014a8, 0x00000101}, /*2:1 */
{0x00020220, 0x00000007},
{0x00001494, 0x00010000}, /*DDR SDRAM ODT Control (Low) Register */
{0x00001498, 0x00000000}, /*DDR SDRAM ODT Control (High) Register */
{0x0000149C, 0x00000301}, /*DDR Dunit ODT Control Register */
{0x000014C0, 0x192424C8}, /* DRAM address and Control Driving Strenght */
{0x000014C4, 0xEFB24C8}, /* DRAM Data and DQS Driving Strenght */
{0x000200e8, 0x3FFF0E01}, /* DO NOT Modify - Open Mbus Window - 2G - Mbus is required for the training sequence */
{0x00020184, 0x3FFFFFE0}, /* DO NOT Modify - Close fast path Window to - 2G */
{0x0001504, 0x7FFFFFF1}, /* CS0 Size */
{0x000150C, 0x00000000}, /* CS1 Size */
{0x0001514, 0x00000000}, /* CS2 Size */
{0x000151C, 0x00000000}, /* CS3 Size */
/* {0x00001524, 0x0000C800}, */
{0x00001538, 0x0000000b}, /*Read Data Sample Delays Register */
{0x0000153C, 0x0000000d}, /*Read Data Ready Delay Register */
{0x000015D0, 0x00000650}, /*MR0 */
{0x000015D4, 0x00000046}, /*MR1 */
{0x000015D8, 0x00000010}, /*MR2 */
{0x000015DC, 0x00000000}, /*MR3 */
{0x000015E4, 0x00203c18}, /*ZQC Configuration Register */
{0x000015EC, 0xDE000025}, /*DDR PHY */
{0x0, 0x0}
};
MV_DRAM_MC_INIT ddr3_Z1_db_300[MV_MAX_DDR3_STATIC_SIZE] = {
#ifdef CONFIG_DDR_32BIT
arm: mvebu: drivers/ddr: Add DDR3 driver with training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the AXP boot image. Not linked with the main U-Boot. With this code addition and the following serdes/PHY setup code, the Armada-XP support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Hopefully other MVEBU SoC's will follow here. Support for some SoC's has been removed in this version. This is: MV_MSYS: The code referred to by the MV_MSYS define is currently unused. And its not really planned to support this in mainline. So lets remove it to make the code clearer and increase the readability. MV88F68XX (A38x): The code referred to by the MV88F68XX define (A38x) is currently unused. And its partial and not sufficient for this device in this stage. So lets remove it to make the code clearer and increase the readability. MV88F66XX (ALP): The code referred to by the MV88F66XX define is currently unused. And its not really planned to support this in mainline. So lets remove it to make the code clearer and increase the readability. MV88F78X60_Z1: The code referred to by the MV88F78X60_Z1 define is currently unused. As the Z1 revision of the AXP is not supported in mainline anymore. So lets remove it to make the code clearer and increase the readability. Remove support for Z1 & A0 AXP revisions (steppings). The current stepping is B0 and this is the only one that is actively supported in this code version. Tested on AXP using a SPD DIMM setup on the Marvell DB-MV784MP-GP board and on a custom fixed DDR configuration board (maxbcm). Note: This code has undergone many hours of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. This might be some task to tackly later on. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
10 years ago
{0x00001400, 0x73004C30}, /*DDR SDRAM Configuration Register */
#else /*CONFIG_DDR_64BIT */
arm: mvebu: drivers/ddr: Add DDR3 driver with training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the AXP boot image. Not linked with the main U-Boot. With this code addition and the following serdes/PHY setup code, the Armada-XP support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Hopefully other MVEBU SoC's will follow here. Support for some SoC's has been removed in this version. This is: MV_MSYS: The code referred to by the MV_MSYS define is currently unused. And its not really planned to support this in mainline. So lets remove it to make the code clearer and increase the readability. MV88F68XX (A38x): The code referred to by the MV88F68XX define (A38x) is currently unused. And its partial and not sufficient for this device in this stage. So lets remove it to make the code clearer and increase the readability. MV88F66XX (ALP): The code referred to by the MV88F66XX define is currently unused. And its not really planned to support this in mainline. So lets remove it to make the code clearer and increase the readability. MV88F78X60_Z1: The code referred to by the MV88F78X60_Z1 define is currently unused. As the Z1 revision of the AXP is not supported in mainline anymore. So lets remove it to make the code clearer and increase the readability. Remove support for Z1 & A0 AXP revisions (steppings). The current stepping is B0 and this is the only one that is actively supported in this code version. Tested on AXP using a SPD DIMM setup on the Marvell DB-MV784MP-GP board and on a custom fixed DDR configuration board (maxbcm). Note: This code has undergone many hours of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. This might be some task to tackly later on. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
10 years ago
{0x00001400, 0x7300CC30}, /*DDR SDRAM Configuration Register */
/*{0x00001400, 0x7304CC30}, *//*DDR SDRAM Configuration Register */
#endif
{0x00001404, 0x3630B840}, /*Dunit Control Low Register */
{0x00001408, 0x33137663}, /*DDR SDRAM Timing (Low) Register */
{0x0000140C, 0x38000C55}, /*DDR SDRAM Timing (High) Register */
{0x00001410, 0x040F0000}, /*DDR SDRAM Address Control Register */
{0x00001414, 0x00000000}, /*DDR SDRAM Open Pages Control Register */
{0x00001418, 0x00000e00}, /*DDR SDRAM Operation Register */
{0x0000141C, 0x00000672}, /*DDR SDRAM Mode Register */
{0x00001420, 0x00000004}, /*DDR SDRAM Extended Mode Register */
{0x00001424, 0x0100F1FF}, /*Dunit Control High Register */
{0x00001428, 0x000D6720}, /*Dunit Control High Register */
{0x0000142C, 0x014C2F38}, /*Dunit Control High Register */
{0x0000147C, 0x00006571},
{0x00001494, 0x00010000}, /*DDR SDRAM ODT Control (Low) Register */
{0x00001498, 0x00000000}, /*DDR SDRAM ODT Control (High) Register */
{0x0000149C, 0x00000301}, /*DDR Dunit ODT Control Register */
{0x000014C0, 0x192424C8}, /* DRAM address and Control Driving Strenght */
{0x000014C4, 0xEFB24C8}, /* DRAM Data and DQS Driving Strenght */
{0x000200e8, 0x3FFF0E01}, /* DO NOT Modify - Open Mbus Window - 2G - Mbus is required for the training sequence */
{0x00020184, 0x3FFFFFE0}, /* DO NOT Modify - Close fast path Window to - 2G */
{0x0001504, 0x7FFFFFF1}, /* CS0 Size */
{0x000150C, 0x00000000}, /* CS1 Size */
{0x0001514, 0x00000000}, /* CS2 Size */
{0x000151C, 0x00000000}, /* CS3 Size */
{0x00001538, 0x00000008}, /*Read Data Sample Delays Register */
{0x0000153C, 0x0000000A}, /*Read Data Ready Delay Register */
{0x000015D0, 0x00000630}, /*MR0 */
{0x000015D4, 0x00000046}, /*MR1 */
{0x000015D8, 0x00000008}, /*MR2 */
{0x000015DC, 0x00000000}, /*MR3 */
{0x000015E4, 0x00203c18}, /*ZQDS Configuration Register */
{0x000015EC, 0xDE000025}, /*DDR PHY */
{0x0, 0x0}
};
#endif /* __AXP_MC_STATIC_H */