upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/drivers/usb/host/ehci-exynos.c

264 lines
6.3 KiB

/*
* SAMSUNG EXYNOS USB HOST EHCI Controller
*
* Copyright (C) 2012 Samsung Electronics Co.Ltd
* Vivek Gautam <gautam.vivek@samsung.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <dm.h>
#include <fdtdec.h>
#include <libfdt.h>
#include <malloc.h>
#include <usb.h>
#include <asm/arch/cpu.h>
#include <asm/arch/ehci.h>
#include <asm/arch/system.h>
#include <asm/arch/power.h>
#include <asm/gpio.h>
#include <linux/errno.h>
#include <linux/compat.h>
#include "ehci.h"
/* Declare global data pointer */
DECLARE_GLOBAL_DATA_PTR;
struct exynos_ehci_platdata {
struct usb_platdata usb_plat;
fdt_addr_t hcd_base;
fdt_addr_t phy_base;
struct gpio_desc vbus_gpio;
};
/**
* Contains pointers to register base addresses
* for the usb controller.
*/
struct exynos_ehci {
struct ehci_ctrl ctrl;
struct exynos_usb_phy *usb;
struct ehci_hccr *hcd;
};
static int ehci_usb_ofdata_to_platdata(struct udevice *dev)
{
struct exynos_ehci_platdata *plat = dev_get_platdata(dev);
const void *blob = gd->fdt_blob;
unsigned int node;
int depth;
/*
* Get the base address for XHCI controller from the device node
*/
plat->hcd_base = dev_get_addr(dev);
if (plat->hcd_base == FDT_ADDR_T_NONE) {
debug("Can't get the XHCI register base address\n");
return -ENXIO;
}
depth = 0;
node = fdtdec_next_compatible_subnode(blob, dev->of_offset,
COMPAT_SAMSUNG_EXYNOS_USB_PHY, &depth);
if (node <= 0) {
debug("XHCI: Can't get device node for usb3-phy controller\n");
return -ENODEV;
}
/*
* Get the base address for usbphy from the device node
*/
plat->phy_base = fdtdec_get_addr(blob, node, "reg");
if (plat->phy_base == FDT_ADDR_T_NONE) {
debug("Can't get the usbphy register address\n");
return -ENXIO;
}
/* Vbus gpio */
gpio_request_by_name(dev, "samsung,vbus-gpio", 0,
&plat->vbus_gpio, GPIOD_IS_OUT);
return 0;
}
static void exynos5_setup_usb_phy(struct exynos_usb_phy *usb)
{
u32 hsic_ctrl;
clrbits_le32(&usb->usbphyctrl0,
HOST_CTRL0_FSEL_MASK |
HOST_CTRL0_COMMONON_N |
/* HOST Phy setting */
HOST_CTRL0_PHYSWRST |
HOST_CTRL0_PHYSWRSTALL |
HOST_CTRL0_SIDDQ |
HOST_CTRL0_FORCESUSPEND |
HOST_CTRL0_FORCESLEEP);
setbits_le32(&usb->usbphyctrl0,
/* Setting up the ref freq */
(CLK_24MHZ << 16) |
/* HOST Phy setting */
HOST_CTRL0_LINKSWRST |
HOST_CTRL0_UTMISWRST);
udelay(10);
clrbits_le32(&usb->usbphyctrl0,
HOST_CTRL0_LINKSWRST |
HOST_CTRL0_UTMISWRST);
/* HSIC Phy Setting */
hsic_ctrl = (HSIC_CTRL_FORCESUSPEND |
HSIC_CTRL_FORCESLEEP |
HSIC_CTRL_SIDDQ);
clrbits_le32(&usb->hsicphyctrl1, hsic_ctrl);
clrbits_le32(&usb->hsicphyctrl2, hsic_ctrl);
hsic_ctrl = (((HSIC_CTRL_REFCLKDIV_12 & HSIC_CTRL_REFCLKDIV_MASK)
<< HSIC_CTRL_REFCLKDIV_SHIFT)
| ((HSIC_CTRL_REFCLKSEL & HSIC_CTRL_REFCLKSEL_MASK)
<< HSIC_CTRL_REFCLKSEL_SHIFT)
| HSIC_CTRL_UTMISWRST);
setbits_le32(&usb->hsicphyctrl1, hsic_ctrl);
setbits_le32(&usb->hsicphyctrl2, hsic_ctrl);
udelay(10);
clrbits_le32(&usb->hsicphyctrl1, HSIC_CTRL_PHYSWRST |
HSIC_CTRL_UTMISWRST);
clrbits_le32(&usb->hsicphyctrl2, HSIC_CTRL_PHYSWRST |
HSIC_CTRL_UTMISWRST);
udelay(20);
/* EHCI Ctrl setting */
setbits_le32(&usb->ehcictrl,
EHCICTRL_ENAINCRXALIGN |
EHCICTRL_ENAINCR4 |
EHCICTRL_ENAINCR8 |
EHCICTRL_ENAINCR16);
}
static void exynos4412_setup_usb_phy(struct exynos4412_usb_phy *usb)
{
writel(CLK_24MHZ, &usb->usbphyclk);
clrbits_le32(&usb->usbphyctrl, (PHYPWR_NORMAL_MASK_HSIC0 |
PHYPWR_NORMAL_MASK_HSIC1 | PHYPWR_NORMAL_MASK_PHY1 |
PHYPWR_NORMAL_MASK_PHY0));
setbits_le32(&usb->usbphyrstcon, (RSTCON_HOSTPHY_SWRST | RSTCON_SWRST));
udelay(10);
clrbits_le32(&usb->usbphyrstcon, (RSTCON_HOSTPHY_SWRST | RSTCON_SWRST));
}
static void setup_usb_phy(struct exynos_usb_phy *usb)
{
set_usbhost_mode(USB20_PHY_CFG_HOST_LINK_EN);
set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_EN);
if (cpu_is_exynos5())
exynos5_setup_usb_phy(usb);
else if (cpu_is_exynos4())
if (proid_is_exynos4412())
exynos4412_setup_usb_phy((struct exynos4412_usb_phy *)
usb);
}
static void exynos5_reset_usb_phy(struct exynos_usb_phy *usb)
{
u32 hsic_ctrl;
/* HOST_PHY reset */
setbits_le32(&usb->usbphyctrl0,
HOST_CTRL0_PHYSWRST |
HOST_CTRL0_PHYSWRSTALL |
HOST_CTRL0_SIDDQ |
HOST_CTRL0_FORCESUSPEND |
HOST_CTRL0_FORCESLEEP);
/* HSIC Phy reset */
hsic_ctrl = (HSIC_CTRL_FORCESUSPEND |
HSIC_CTRL_FORCESLEEP |
HSIC_CTRL_SIDDQ |
HSIC_CTRL_PHYSWRST);
setbits_le32(&usb->hsicphyctrl1, hsic_ctrl);
setbits_le32(&usb->hsicphyctrl2, hsic_ctrl);
}
static void exynos4412_reset_usb_phy(struct exynos4412_usb_phy *usb)
{
setbits_le32(&usb->usbphyctrl, (PHYPWR_NORMAL_MASK_HSIC0 |
PHYPWR_NORMAL_MASK_HSIC1 | PHYPWR_NORMAL_MASK_PHY1 |
PHYPWR_NORMAL_MASK_PHY0));
}
/* Reset the EHCI host controller. */
static void reset_usb_phy(struct exynos_usb_phy *usb)
{
if (cpu_is_exynos5())
exynos5_reset_usb_phy(usb);
else if (cpu_is_exynos4())
if (proid_is_exynos4412())
exynos4412_reset_usb_phy((struct exynos4412_usb_phy *)
usb);
set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_DISABLE);
}
static int ehci_usb_probe(struct udevice *dev)
{
struct exynos_ehci_platdata *plat = dev_get_platdata(dev);
struct exynos_ehci *ctx = dev_get_priv(dev);
struct ehci_hcor *hcor;
ctx->hcd = (struct ehci_hccr *)plat->hcd_base;
ctx->usb = (struct exynos_usb_phy *)plat->phy_base;
/* setup the Vbus gpio here */
if (dm_gpio_is_valid(&plat->vbus_gpio))
dm_gpio_set_value(&plat->vbus_gpio, 1);
setup_usb_phy(ctx->usb);
hcor = (struct ehci_hcor *)((uint32_t)ctx->hcd +
HC_LENGTH(ehci_readl(&ctx->hcd->cr_capbase)));
return ehci_register(dev, ctx->hcd, hcor, NULL, 0, USB_INIT_HOST);
}
static int ehci_usb_remove(struct udevice *dev)
{
struct exynos_ehci *ctx = dev_get_priv(dev);
int ret;
ret = ehci_deregister(dev);
if (ret)
return ret;
reset_usb_phy(ctx->usb);
return 0;
}
static const struct udevice_id ehci_usb_ids[] = {
{ .compatible = "samsung,exynos-ehci" },
{ }
};
U_BOOT_DRIVER(usb_ehci) = {
.name = "ehci_exynos",
.id = UCLASS_USB,
.of_match = ehci_usb_ids,
.ofdata_to_platdata = ehci_usb_ofdata_to_platdata,
.probe = ehci_usb_probe,
.remove = ehci_usb_remove,
.ops = &ehci_usb_ops,
.priv_auto_alloc_size = sizeof(struct exynos_ehci),
.platdata_auto_alloc_size = sizeof(struct exynos_ehci_platdata),
.flags = DM_FLAG_ALLOC_PRIV_DMA,
};