upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/board/trab/tsc2000.h

146 lines
5.3 KiB

/*
* Functions to access the TSC2000 controller on TRAB board (used for scanning
* thermo sensors)
*
* Copyright (C) 2003 Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
*
* Copyright (C) 2002 DENX Software Engineering, Wolfgang Denk, wd@denx.de
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _TSC2000_H_
#define _TSC2000_H_
/* temperature channel multiplexer definitions */
#define CON_MUX0 (gpio->PCCON = (gpio->PCCON & 0x0FFFFFCFF) | 0x00000100)
#define CLR_MUX0 (gpio->PCDAT &= 0x0FFEF)
#define SET_MUX0 (gpio->PCDAT |= 0x00010)
#define CON_MUX1 (gpio->PCCON = (gpio->PCCON & 0x0FFFFF3FF) | 0x00000400)
#define CLR_MUX1 (gpio->PCDAT &= 0x0FFDF)
#define SET_MUX1 (gpio->PCDAT |= 0x00020)
#define CON_MUX1_ENABLE (gpio->PCCON = (gpio->PCCON & 0x0FFFFCFFF) | 0x00001000)
#define CLR_MUX1_ENABLE (gpio->PCDAT |= 0x00040)
#define SET_MUX1_ENABLE (gpio->PCDAT &= 0x0FFBF)
#define CON_MUX2_ENABLE (gpio->PCCON = (gpio->PCCON & 0x0FFFF3FFF) | 0x00004000)
#define CLR_MUX2_ENABLE (gpio->PCDAT |= 0x00080)
#define SET_MUX2_ENABLE (gpio->PCDAT &= 0x0FF7F)
#define CON_MUX3_ENABLE (gpio->PCCON = (gpio->PCCON & 0x0FFFCFFFF) | 0x00010000)
#define CLR_MUX3_ENABLE (gpio->PCDAT |= 0x00100)
#define SET_MUX3_ENABLE (gpio->PCDAT &= 0x0FEFF)
#define CON_MUX4_ENABLE (gpio->PCCON = (gpio->PCCON & 0x0FFF3FFFF) | 0x00040000)
#define CLR_MUX4_ENABLE (gpio->PCDAT |= 0x00200)
#define SET_MUX4_ENABLE (gpio->PCDAT &= 0x0FDFF)
#define CON_SEL_TEMP_V_0 (gpio->PCCON = (gpio->PCCON & 0x0FFCFFFFF) | 0x00100000)
#define CLR_SEL_TEMP_V_0 (gpio->PCDAT &= 0x0FBFF)
#define SET_SEL_TEMP_V_0 (gpio->PCDAT |= 0x00400)
#define CON_SEL_TEMP_V_1 (gpio->PCCON = (gpio->PCCON & 0x0FF3FFFFF) | 0x00400000)
#define CLR_SEL_TEMP_V_1 (gpio->PCDAT &= 0x0F7FF)
#define SET_SEL_TEMP_V_1 (gpio->PCDAT |= 0x00800)
#define CON_SEL_TEMP_V_2 (gpio->PCCON = (gpio->PCCON & 0x0FCFFFFFF) | 0x01000000)
#define CLR_SEL_TEMP_V_2 (gpio->PCDAT &= 0x0EFFF)
#define SET_SEL_TEMP_V_2 (gpio->PCDAT |= 0x01000)
#define CON_SEL_TEMP_V_3 (gpio->PCCON = (gpio->PCCON & 0x0F3FFFFFF) | 0x04000000)
#define CLR_SEL_TEMP_V_3 (gpio->PCDAT &= 0x0DFFF)
#define SET_SEL_TEMP_V_3 (gpio->PCDAT |= 0x02000)
/* TSC2000 register definition */
#define TSC2000_REG_X ((0 << 11) | (0 << 5))
#define TSC2000_REG_Y ((0 << 11) | (1 << 5))
#define TSC2000_REG_Z1 ((0 << 11) | (2 << 5))
#define TSC2000_REG_Z2 ((0 << 11) | (3 << 5))
#define TSC2000_REG_BAT1 ((0 << 11) | (5 << 5))
#define TSC2000_REG_BAT2 ((0 << 11) | (6 << 5))
#define TSC2000_REG_AUX1 ((0 << 11) | (7 << 5))
#define TSC2000_REG_AUX2 ((0 << 11) | (8 << 5))
#define TSC2000_REG_TEMP1 ((0 << 11) | (9 << 5))
#define TSC2000_REG_TEMP2 ((0 << 11) | (0xA << 5))
#define TSC2000_REG_DAC ((0 << 11) | (0xB << 5))
#define TSC2000_REG_ZERO ((0 << 11) | (0x10 << 5))
#define TSC2000_REG_ADC ((1 << 11) | (0 << 5))
#define TSC2000_REG_DACCTL ((1 << 11) | (2 << 5))
#define TSC2000_REG_REF ((1 << 11) | (3 << 5))
#define TSC2000_REG_RESET ((1 << 11) | (4 << 5))
#define TSC2000_REG_CONFIG ((1 << 11) | (5 << 5))
/* bit definition of TSC2000 ADC register */
#define TC_PSM (1 << 15)
#define TC_STS (1 << 14)
#define TC_AD3 (1 << 13)
#define TC_AD2 (1 << 12)
#define TC_AD1 (1 << 11)
#define TC_AD0 (1 << 10)
#define TC_RS1 (1 << 9)
#define TC_RS0 (1 << 8)
#define TC_AV1 (1 << 7)
#define TC_AV0 (1 << 6)
#define TC_CL1 (1 << 5)
#define TC_CL0 (1 << 4)
#define TC_PV2 (1 << 3)
#define TC_PV1 (1 << 2)
#define TC_PV0 (1 << 1)
/* default value for TSC2000 ADC register for use with touch functions */
#define DEFAULT_ADC (TC_PV1 | TC_AV0 | TC_AV1 | TC_RS0)
#define TSC2000_DELAY_BASE 500
#define TSC2000_NO_SENSOR -0x10000
#define ERROR_BATTERY 220 /* must be adjusted, if R68 is changed on
* TRAB */
void tsc2000_write(unsigned short, unsigned short);
unsigned short tsc2000_read (unsigned short);
u16 tsc2000_read_channel (unsigned int);
void tsc2000_set_mux (unsigned int);
void tsc2000_set_range (unsigned int);
void tsc2000_reg_init (void);
s32 tsc2000_contact_temp (void);
void spi_wait_transmit_done (void);
void spi_init(void);
int tsc2000_interpolate(long value, long data[][2], long *result);
void adc_wait_conversion_done(void);
static inline void SET_CS_TOUCH(void)
{
S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
gpio->PDDAT &= 0x5FF;
}
static inline void CLR_CS_TOUCH(void)
{
S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
gpio->PDDAT |= 0x200;
}
#endif /* _TSC2000_H_ */