u-boot/board/gateworks/gw_ventana/Makefile

#
# Copyright (C) 2012-2013, Guennadi Liakhovetski <lg@denx.de>
# (C) Copyright 2012-2013 Freescale Semiconductor, Inc.
# Copyright (C) 2013, Gateworks Corporation
#
# SPDX-License-Identifier:  GPL-2.0+
#

obj-y  := gw_ventana.o gsc.o eeprom.o common.o
obj-$(CONFIG_SPL_BUILD) += gw_ventana_spl.o
ventana: Add Gateworks Ventana family support Gateworks Ventana is a product family based on the i.MX6. This patch adds support for all boards in the Ventana family. Where possible, data from the boards EEPROM is used to determine various details about the board at runtime. Signed-off-by: Tim Harvey <tharvey@gateworks.com> 11 years ago			`#`
			`# Copyright (C) 2012-2013, Guennadi Liakhovetski <lg@denx.de>`
			`# (C) Copyright 2012-2013 Freescale Semiconductor, Inc.`
			`# Copyright (C) 2013, Gateworks Corporation`
			`#`
			`# SPDX-License-Identifier: GPL-2.0+`
			`#`

imx: ventana: split out common functions between SPL and uboot Move shared functions used by both SPL and U-Boot to common.c: - setup_iomux_uart() and uart pad config - gpio pad config In the process also moved the following to common.c in preparation for calling it from the SPL: - split i2c setup into a shared function - move pmic init to setup_pmic() function to call directly from power_init_board() - split gpio setup into early (iomux and default pin config) and late (output configuration based on env) Signed-off-by: Tim Harvey <tharvey@gateworks.com> 10 years ago			`obj-y := gw_ventana.o gsc.o eeprom.o common.o`
imx: ventana: switch to SPL Switch to an SPL image. The SPL for Ventana does the following: - setup i2c and read the factory programmed EEPROM to obtain DRAM config and model for board-specific calibration data - configure DRAM per CPU/size/layout/devices/calibration - load u-boot.img from NAND and jump to it This allows for a single SPL+u-boot.img to replace the previous multiple boa configurations. Cc: Stefan Roese <sr@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Andy Ng <andreas2025@gmail.com> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Tapani Utriainen <tapani@technexion.com> Cc: Tom Rini <trini@ti.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com> 11 years ago			`obj-$(CONFIG_SPL_BUILD) += gw_ventana_spl.o`
ventana: Add Gateworks Ventana family support Gateworks Ventana is a product family based on the i.MX6. This patch adds support for all boards in the Ventana family. Where possible, data from the boards EEPROM is used to determine various details about the board at runtime. Signed-off-by: Tim Harvey <tharvey@gateworks.com> 11 years ago