|
|
|
|
/*
|
|
|
|
|
* U-boot - Configuration file for CM-BF561 board
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#ifndef __CONFIG_CM_BF561_H__
|
|
|
|
|
#define __CONFIG_CM_BF561_H__
|
|
|
|
|
|
|
|
|
|
#include <asm/config-pre.h>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Processor Settings
|
|
|
|
|
*/
|
|
|
|
|
#define CONFIG_BFIN_CPU bf561-0.3
|
|
|
|
|
#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Clock Settings
|
|
|
|
|
* CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
|
|
|
|
|
* SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
|
|
|
|
|
*/
|
|
|
|
|
/* CONFIG_CLKIN_HZ is any value in Hz */
|
|
|
|
|
#define CONFIG_CLKIN_HZ 25000000
|
|
|
|
|
/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
|
|
|
|
|
/* 1 = CLKIN / 2 */
|
|
|
|
|
#define CONFIG_CLKIN_HALF 0
|
|
|
|
|
/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
|
|
|
|
|
/* 1 = bypass PLL */
|
|
|
|
|
#define CONFIG_PLL_BYPASS 0
|
|
|
|
|
/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
|
|
|
|
|
/* Values can range from 0-63 (where 0 means 64) */
|
|
|
|
|
#define CONFIG_VCO_MULT 22
|
|
|
|
|
/* CCLK_DIV controls the core clock divider */
|
|
|
|
|
/* Values can be 1, 2, 4, or 8 ONLY */
|
|
|
|
|
#define CONFIG_CCLK_DIV 1
|
|
|
|
|
/* SCLK_DIV controls the system clock divider */
|
|
|
|
|
/* Values can range from 1-15 */
|
|
|
|
|
#define CONFIG_SCLK_DIV 5
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Memory Settings
|
|
|
|
|
*/
|
|
|
|
|
#define CONFIG_MEM_ADD_WDTH 9
|
|
|
|
|
#define CONFIG_MEM_SIZE 64
|
|
|
|
|
|
|
|
|
|
#define CONFIG_EBIU_SDRRC_VAL ((((CONFIG_SCLK_HZ / 1000) * 64) / 4096) - (7 + 2))
|
|
|
|
|
#define CONFIG_EBIU_SDGCTL_VAL (SCTLE | PSS | TWR_2 | TRCD_2 | TRP_2 | TRAS_7 | PASR_ALL | CL_3)
|
|
|
|
|
|
|
|
|
|
#define CONFIG_EBIU_AMGCTL_VAL (CDPRIO | B3_PEN | B2_PEN | B1_PEN | B0_PEN | AMBEN_ALL | AMCKEN)
|
|
|
|
|
#define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3)
|
|
|
|
|
#define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3)
|
|
|
|
|
|
|
|
|
|
#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
|
|
|
|
|
#define CONFIG_SYS_MALLOC_LEN (128 * 1024)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Network Settings
|
|
|
|
|
*/
|
|
|
|
|
#define ADI_CMDS_NETWORK 1
|
|
|
|
|
/* The next 2 lines are for use with DEV-BF5xx */
|
|
|
|
|
#define CONFIG_NET_MULTI
|
|
|
|
|
#define CONFIG_SMC91111 1
|
|
|
|
|
#define CONFIG_SMC91111_BASE 0x28000300
|
|
|
|
|
/* The next 3 lines are for use with EXT-BF5xx-USB-ETH2 */
|
|
|
|
|
/* #define CONFIG_DRIVER_SMC911X 1 */
|
|
|
|
|
/* #define CONFIG_DRIVER_SMC911X_BASE 0x24080000 /! AMS1 */
|
|
|
|
|
/* #define CONFIG_DRIVER_SMC911X_32_BIT 1 */
|
|
|
|
|
#define CONFIG_HOSTNAME cm-bf561
|
|
|
|
|
/* Uncomment next line to use fixed MAC address */
|
|
|
|
|
/* #define CONFIG_ETHADDR 02:80:ad:20:31:cf */
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Flash Settings
|
|
|
|
|
*/
|
|
|
|
|
#define CONFIG_FLASH_CFI_DRIVER
|
|
|
|
|
#define CONFIG_SYS_FLASH_BASE 0x20000000
|
|
|
|
|
#define CONFIG_SYS_FLASH_CFI
|
|
|
|
|
#define CONFIG_SYS_FLASH_PROTECTION
|
|
|
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
|
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 67
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Env Storage Settings
|
|
|
|
|
*/
|
|
|
|
|
#define CONFIG_ENV_IS_IN_FLASH 1
|
|
|
|
|
#define CONFIG_ENV_OFFSET 0x20000
|
|
|
|
|
#define CONFIG_ENV_SECT_SIZE 0x20000
|
|
|
|
|
#define CONFIG_ENV_SIZE 0x10000
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Misc Settings
|
|
|
|
|
*/
|
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
|
#define CONFIG_UART_CONSOLE 0
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Pull in common ADI header for remaining command/environment setup
|
|
|
|
|
*/
|
|
|
|
|
#include <configs/bfin_adi_common.h>
|
|
|
|
|
|
|
|
|
|
#endif
|
