upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/cpu/arm926ejs/davinci/lxt972.c

143 lines
3.4 KiB

/*
* Intel LXT971/LXT972 PHY Driver for TI DaVinci
* (TMS320DM644x) based boards.
*
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
*
* --------------------------------------------------------
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <net.h>
#include <lxt971a.h>
#include <asm/arch/emac_defs.h>
#ifdef CONFIG_DRIVER_TI_EMAC
#ifdef CONFIG_CMD_NET
int lxt972_is_phy_connected(int phy_addr)
{
u_int16_t id1, id2;
if (!dm644x_eth_phy_read(phy_addr, PHY_COMMON_ID1, &id1))
return(0);
if (!dm644x_eth_phy_read(phy_addr, PHY_COMMON_ID2, &id2))
return(0);
if ((id1 == (0x0013)) && ((id2 & 0xfff0) == 0x78e0))
return(1);
return(0);
}
int lxt972_get_link_speed(int phy_addr)
{
u_int16_t stat1, tmp;
volatile emac_regs* emac = (emac_regs *)EMAC_BASE_ADDR;
if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_STAT2, &stat1))
return(0);
if (!(stat1 & PHY_LXT971_STAT2_LINK)) /* link up? */
return(0);
if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
return(0);
tmp |= PHY_LXT971_DIG_CFG_MII_DRIVE;
dm644x_eth_phy_write(phy_addr, PHY_LXT971_DIG_CFG, tmp);
/* Read back */
if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
return(0);
/* Speed doesn't matter, there is no setting for it in EMAC... */
if (stat1 & PHY_LXT971_STAT2_100BTX) {
if (stat1 & PHY_LXT971_STAT2_DUPLEX_MODE) {
/* set DM644x EMAC for Full Duplex */
emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
} else {
/*set DM644x EMAC for Half Duplex */
emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;
}
return(1);
} else {
if (stat1 & PHY_LXT971_STAT2_DUPLEX_MODE) {
/* set DM644x EMAC for Full Duplex */
emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
} else {
/*set DM644x EMAC for Half Duplex */
emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;
}
return(1);
}
return(0);
}
int lxt972_init_phy(int phy_addr)
{
int ret = 1;
if (!lxt972_get_link_speed(phy_addr)) {
/* Try another time */
ret = lxt972_get_link_speed(phy_addr);
}
/* Disable PHY Interrupts */
dm644x_eth_phy_write(phy_addr, PHY_LXT971_INT_ENABLE, 0);
return(ret);
}
int lxt972_auto_negotiate(int phy_addr)
{
u_int16_t tmp;
if (!dm644x_eth_phy_read(phy_addr, PHY_COMMON_CTRL, &tmp))
return(0);
/* Restart Auto_negotiation */
tmp |= PHY_COMMON_CTRL_RES_AUTO;
dm644x_eth_phy_write(phy_addr, PHY_COMMON_CTRL, tmp);
/*check AutoNegotiate complete */
udelay (10000);
if (!dm644x_eth_phy_read(phy_addr, PHY_COMMON_STAT, &tmp))
return(0);
if (!(tmp & PHY_COMMON_STAT_AN_COMP))
return(0);
return (lxt972_get_link_speed(phy_addr));
}
#endif /* CONFIG_CMD_NET */
#endif /* CONFIG_DRIVER_ETHER */