|
|
|
/*
|
|
|
|
* Copyright 2004,2007-2010 Freescale Semiconductor, Inc.
|
|
|
|
* (C) Copyright 2002, 2003 Motorola Inc.
|
|
|
|
* Xianghua Xiao (X.Xiao@motorola.com)
|
|
|
|
*
|
|
|
|
* (C) Copyright 2000
|
|
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
|
|
*
|
|
|
|
* See file CREDITS for list of people who contributed to this
|
|
|
|
* project.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU General Public License as
|
|
|
|
* published by the Free Software Foundation; either version 2 of
|
|
|
|
* the License, or (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
|
|
* MA 02111-1307 USA
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <config.h>
|
|
|
|
#include <common.h>
|
|
|
|
#include <watchdog.h>
|
|
|
|
#include <command.h>
|
|
|
|
#include <fsl_esdhc.h>
|
|
|
|
#include <asm/cache.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/mmu.h>
|
|
|
|
#include <asm/fsl_law.h>
|
|
|
|
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
|
|
|
|
int checkcpu (void)
|
|
|
|
{
|
|
|
|
sys_info_t sysinfo;
|
|
|
|
uint pvr, svr;
|
|
|
|
uint fam;
|
|
|
|
uint ver;
|
|
|
|
uint major, minor;
|
|
|
|
struct cpu_type *cpu;
|
|
|
|
char buf1[32], buf2[32];
|
|
|
|
#if defined(CONFIG_DDR_CLK_FREQ) || defined(CONFIG_FSL_CORENET)
|
|
|
|
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
|
|
#endif /* CONFIG_FSL_CORENET */
|
|
|
|
#ifdef CONFIG_DDR_CLK_FREQ
|
|
|
|
u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
|
|
|
|
>> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
|
|
|
|
#else
|
|
|
|
#ifdef CONFIG_FSL_CORENET
|
|
|
|
u32 ddr_sync = ((gur->rcwsr[5]) & FSL_CORENET_RCWSR5_DDR_SYNC)
|
|
|
|
>> FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT;
|
|
|
|
#else
|
|
|
|
u32 ddr_ratio = 0;
|
|
|
|
#endif /* CONFIG_FSL_CORENET */
|
|
|
|
#endif /* CONFIG_DDR_CLK_FREQ */
|
|
|
|
int i;
|
|
|
|
|
|
|
|
svr = get_svr();
|
|
|
|
major = SVR_MAJ(svr);
|
|
|
|
#ifdef CONFIG_MPC8536
|
|
|
|
major &= 0x7; /* the msb of this nibble is a mfg code */
|
|
|
|
#endif
|
|
|
|
minor = SVR_MIN(svr);
|
|
|
|
|
|
|
|
if (cpu_numcores() > 1) {
|
|
|
|
#ifndef CONFIG_MP
|
|
|
|
puts("Unicore software on multiprocessor system!!\n"
|
|
|
|
"To enable mutlticore build define CONFIG_MP\n");
|
|
|
|
#endif
|
|
|
|
volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC8xxx_PIC_ADDR);
|
|
|
|
printf("CPU%d: ", pic->whoami);
|
|
|
|
} else {
|
|
|
|
puts("CPU: ");
|
|
|
|
}
|
|
|
|
|
|
|
|
cpu = gd->cpu;
|
|
|
|
|
|
|
|
puts(cpu->name);
|
|
|
|
if (IS_E_PROCESSOR(svr))
|
|
|
|
puts("E");
|
|
|
|
|
|
|
|
printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr);
|
|
|
|
|
|
|
|
pvr = get_pvr();
|
|
|
|
fam = PVR_FAM(pvr);
|
|
|
|
ver = PVR_VER(pvr);
|
|
|
|
major = PVR_MAJ(pvr);
|
|
|
|
minor = PVR_MIN(pvr);
|
|
|
|
|
|
|
|
printf("Core: ");
|
|
|
|
if (PVR_FAM(PVR_85xx)) {
|
|
|
|
switch(PVR_MEM(pvr)) {
|
|
|
|
case 0x1:
|
|
|
|
case 0x2:
|
|
|
|
puts("E500");
|
|
|
|
break;
|
|
|
|
case 0x3:
|
|
|
|
puts("E500MC");
|
|
|
|
break;
|
|
|
|
case 0x4:
|
|
|
|
puts("E5500");
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
puts("Unknown");
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
puts("Unknown");
|
|
|
|
}
|
|
|
|
|
|
|
|
printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr);
|
|
|
|
|
|
|
|
get_sys_info(&sysinfo);
|
|
|
|
|
|
|
|
puts("Clock Configuration:");
|
|
|
|
for (i = 0; i < cpu_numcores(); i++) {
|
|
|
|
if (!(i & 3))
|
|
|
|
printf ("\n ");
|
|
|
|
printf("CPU%d:%-4s MHz, ",
|
|
|
|
i,strmhz(buf1, sysinfo.freqProcessor[i]));
|
|
|
|
}
|
|
|
|
printf("\n CCB:%-4s MHz,\n", strmhz(buf1, sysinfo.freqSystemBus));
|
|
|
|
|
|
|
|
#ifdef CONFIG_FSL_CORENET
|
|
|
|
if (ddr_sync == 1) {
|
|
|
|
printf(" DDR:%-4s MHz (%s MT/s data rate) "
|
|
|
|
"(Synchronous), ",
|
|
|
|
strmhz(buf1, sysinfo.freqDDRBus/2),
|
|
|
|
strmhz(buf2, sysinfo.freqDDRBus));
|
|
|
|
} else {
|
|
|
|
printf(" DDR:%-4s MHz (%s MT/s data rate) "
|
|
|
|
"(Asynchronous), ",
|
|
|
|
strmhz(buf1, sysinfo.freqDDRBus/2),
|
|
|
|
strmhz(buf2, sysinfo.freqDDRBus));
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
switch (ddr_ratio) {
|
|
|
|
case 0x0:
|
|
|
|
printf(" DDR:%-4s MHz (%s MT/s data rate), ",
|
|
|
|
strmhz(buf1, sysinfo.freqDDRBus/2),
|
|
|
|
strmhz(buf2, sysinfo.freqDDRBus));
|
|
|
|
break;
|
|
|
|
case 0x7:
|
|
|
|
printf(" DDR:%-4s MHz (%s MT/s data rate) "
|
|
|
|
"(Synchronous), ",
|
|
|
|
strmhz(buf1, sysinfo.freqDDRBus/2),
|
|
|
|
strmhz(buf2, sysinfo.freqDDRBus));
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
printf(" DDR:%-4s MHz (%s MT/s data rate) "
|
|
|
|
"(Asynchronous), ",
|
|
|
|
strmhz(buf1, sysinfo.freqDDRBus/2),
|
|
|
|
strmhz(buf2, sysinfo.freqDDRBus));
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
if (sysinfo.freqLocalBus > LCRR_CLKDIV) {
|
mpc8[56]xx: Put localbus clock in sysinfo and gd
Currently MPC85xx and MPC86xx boards just calculate the localbus frequency
and print it out, but don't save it.
This changes where its calculated and stored to be more consistent with the
CPU, CCB, TB, and DDR frequencies and the MPC83xx localbus clock.
The localbus frequency is added to sysinfo and calculated when sysinfo is
set up, in cpu/mpc8[56]xx/speed.c, the same as the other frequencies are.
get_clocks() copies the frequency into the global data, as the other
frequencies are, into a new field that is only enabled for MPC85xx and
MPC86xx.
checkcpu() in cpu/mpc8[56]xx/cpu.c will print out the local bus frequency
from sysinfo, like the other frequencies, instead of calculating it on the
spot.
Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Jon Loeliger <jdl@freescale.com>
16 years ago
|
|
|
printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
|
|
|
|
} else {
|
mpc8[56]xx: Put localbus clock in sysinfo and gd
Currently MPC85xx and MPC86xx boards just calculate the localbus frequency
and print it out, but don't save it.
This changes where its calculated and stored to be more consistent with the
CPU, CCB, TB, and DDR frequencies and the MPC83xx localbus clock.
The localbus frequency is added to sysinfo and calculated when sysinfo is
set up, in cpu/mpc8[56]xx/speed.c, the same as the other frequencies are.
get_clocks() copies the frequency into the global data, as the other
frequencies are, into a new field that is only enabled for MPC85xx and
MPC86xx.
checkcpu() in cpu/mpc8[56]xx/cpu.c will print out the local bus frequency
from sysinfo, like the other frequencies, instead of calculating it on the
spot.
Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Jon Loeliger <jdl@freescale.com>
16 years ago
|
|
|
printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n",
|
|
|
|
sysinfo.freqLocalBus);
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_CPM2
|
|
|
|
printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus));
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifdef CONFIG_QE
|
|
|
|
printf(" QE:%-4s MHz\n", strmhz(buf1, sysinfo.freqQE));
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifdef CONFIG_SYS_DPAA_FMAN
|
|
|
|
for (i = 0; i < CONFIG_SYS_NUM_FMAN; i++) {
|
|
|
|
printf(" FMAN%d: %s MHz\n", i + 1,
|
|
|
|
strmhz(buf1, sysinfo.freqFMan[i]));
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifdef CONFIG_SYS_DPAA_PME
|
|
|
|
printf(" PME: %s MHz\n", strmhz(buf1, sysinfo.freqPME));
|
|
|
|
#endif
|
|
|
|
|
|
|
|
puts("L1: D-cache 32 kB enabled\n I-cache 32 kB enabled\n");
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
|
|
|
|
int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char * const argv[])
|
|
|
|
{
|
|
|
|
/* Everything after the first generation of PQ3 parts has RSTCR */
|
|
|
|
#if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
|
|
|
|
defined(CONFIG_MPC8555) || defined(CONFIG_MPC8560)
|
|
|
|
unsigned long val, msr;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Initiate hard reset in debug control register DBCR0
|
|
|
|
* Make sure MSR[DE] = 1. This only resets the core.
|
|
|
|
*/
|
|
|
|
msr = mfmsr ();
|
|
|
|
msr |= MSR_DE;
|
|
|
|
mtmsr (msr);
|
|
|
|
|
|
|
|
val = mfspr(DBCR0);
|
|
|
|
val |= 0x70000000;
|
|
|
|
mtspr(DBCR0,val);
|
|
|
|
#else
|
|
|
|
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
|
|
out_be32(&gur->rstcr, 0x2); /* HRESET_REQ */
|
|
|
|
udelay(100);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Get timebase clock frequency
|
|
|
|
*/
|
|
|
|
unsigned long get_tbclk (void)
|
|
|
|
{
|
|
|
|
#ifdef CONFIG_FSL_CORENET
|
|
|
|
return (gd->bus_clk + 8) / 16;
|
|
|
|
#else
|
|
|
|
return (gd->bus_clk + 4UL)/8UL;
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
#if defined(CONFIG_WATCHDOG)
|
|
|
|
void
|
|
|
|
watchdog_reset(void)
|
|
|
|
{
|
|
|
|
int re_enable = disable_interrupts();
|
|
|
|
reset_85xx_watchdog();
|
|
|
|
if (re_enable) enable_interrupts();
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
reset_85xx_watchdog(void)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* Clear TSR(WIS) bit by writing 1
|
|
|
|
*/
|
|
|
|
unsigned long val;
|
|
|
|
val = mfspr(SPRN_TSR);
|
|
|
|
val |= TSR_WIS;
|
|
|
|
mtspr(SPRN_TSR, val);
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_WATCHDOG */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Initializes on-chip MMC controllers.
|
|
|
|
* to override, implement board_mmc_init()
|
|
|
|
*/
|
|
|
|
int cpu_mmc_init(bd_t *bis)
|
|
|
|
{
|
|
|
|
#ifdef CONFIG_FSL_ESDHC
|
|
|
|
return fsl_esdhc_mmc_init(bis);
|
|
|
|
#else
|
|
|
|
return 0;
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Print out the state of various machine registers.
|
|
|
|
* Currently prints out LAWs, BR0/OR0, and TLBs
|
|
|
|
*/
|
|
|
|
void mpc85xx_reginfo(void)
|
|
|
|
{
|
|
|
|
print_tlbcam();
|
|
|
|
print_laws();
|
|
|
|
print_lbc_regs();
|
|
|
|
}
|