upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/arch/blackfin/lib/cache.c

124 lines
2.5 KiB

/*
* U-boot - cache.c
*
* Copyright (c) 2005-2008 Analog Devices Inc.
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* Licensed under the GPL-2 or later.
*/
#include <common.h>
#include <asm/blackfin.h>
#include <asm/mach-common/bits/mpu.h>
void flush_cache(unsigned long addr, unsigned long size)
{
void *start_addr, *end_addr;
int istatus, dstatus;
/* no need to flush stuff in on chip memory (L1/L2/etc...) */
if (addr >= 0xE0000000)
return;
start_addr = (void *)addr;
end_addr = (void *)(addr + size);
istatus = icache_status();
dstatus = dcache_status();
if (istatus) {
if (dstatus)
blackfin_icache_dcache_flush_range(start_addr, end_addr);
else
blackfin_icache_flush_range(start_addr, end_addr);
} else if (dstatus)
blackfin_dcache_flush_range(start_addr, end_addr);
}
#ifdef CONFIG_DCACHE_WB
static void flushinv_all_dcache(void)
{
u32 way, bank, subbank, set;
u32 status, addr;
u32 dmem_ctl = bfin_read_DMEM_CONTROL();
for (bank = 0; bank < 2; ++bank) {
if (!(dmem_ctl & (1 << (DMC1_P - bank))))
continue;
for (way = 0; way < 2; ++way)
for (subbank = 0; subbank < 4; ++subbank)
for (set = 0; set < 64; ++set) {
bfin_write_DTEST_COMMAND(
way << 26 |
bank << 23 |
subbank << 16 |
set << 5
);
CSYNC();
status = bfin_read_DTEST_DATA0();
/* only worry about valid/dirty entries */
if ((status & 0x3) != 0x3)
continue;
/* construct the address using the tag */
addr = (status & 0xFFFFC800) | (subbank << 12) | (set << 5);
/* flush it */
__asm__ __volatile__("FLUSHINV[%0];" : : "a"(addr));
}
}
}
#endif
void icache_enable(void)
{
bfin_write_IMEM_CONTROL(IMC | ENICPLB);
SSYNC();
}
void icache_disable(void)
{
bfin_write_IMEM_CONTROL(0);
SSYNC();
}
int icache_status(void)
{
return bfin_read_IMEM_CONTROL() & IMC;
}
void dcache_enable(void)
{
bfin_write_DMEM_CONTROL(ACACHE_BCACHE | ENDCPLB | PORT_PREF0);
SSYNC();
}
void dcache_disable(void)
{
#ifdef CONFIG_DCACHE_WB
bfin_write_DMEM_CONTROL(bfin_read_DMEM_CONTROL() & ~(ENDCPLB));
flushinv_all_dcache();
#endif
bfin_write_DMEM_CONTROL(0);
SSYNC();
}
int dcache_status(void)
{
return bfin_read_DMEM_CONTROL() & ACACHE_BCACHE;
}
void invalidate_dcache_range(unsigned long start, unsigned long stop)
{
blackfin_dcache_flush_invalidate_range((const void *)start, (const void *)stop);
}
void flush_dcache_range(unsigned long start, unsigned long stop)
{
blackfin_dcache_flush_range((const void *)start, (const void *)stop);
}