upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/include/post.h

111 lines
3.3 KiB

23 years ago
/*
* (C) Copyright 2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _POST_H
#define _POST_H
#ifndef __ASSEMBLY__
#include <common.h>
#endif
#ifdef CONFIG_POST
#define POST_POWERON 0x01 /* test runs on power-on booting */
#define POST_NORMAL 0x02 /* test runs on normal booting */
#define POST_SLOWTEST 0x04 /* test is slow, enabled by key press */
23 years ago
#define POST_POWERTEST 0x08 /* test runs after watchdog reset */
#define POST_COLDBOOT 0x80 /* first boot after power-on */
23 years ago
#define POST_ROM 0x0100 /* test runs in ROM */
#define POST_RAM 0x0200 /* test runs in RAM */
#define POST_MANUAL 0x0400 /* test runs on diag command */
#define POST_REBOOT 0x0800 /* test may cause rebooting */
#define POST_PREREL 0x1000 /* test runs before relocation */
23 years ago
#define POST_CRITICAL 0x2000 /* Use failbootcmd if test failed */
#define POST_STOP 0x4000 /* Interrupt POST sequence on fail */
23 years ago
#define POST_MEM (POST_RAM | POST_ROM)
#define POST_ALWAYS (POST_NORMAL | \
POST_SLOWTEST | \
POST_MANUAL | \
23 years ago
POST_POWERON )
#define POST_FAIL_SAVE 0x80
23 years ago
#ifndef __ASSEMBLY__
struct post_test {
char *name;
char *cmd;
char *desc;
int flags;
int (*test) (int flags);
int (*init_f) (void);
void (*reloc) (void);
unsigned long testid;
23 years ago
};
int post_init_f (void);
23 years ago
void post_bootmode_init (void);
int post_bootmode_get (unsigned int * last_test);
void post_bootmode_clear (void);
void post_output_backlog ( void );
23 years ago
int post_run (char *name, int flags);
int post_info (char *name);
int post_log (char *format, ...);
void post_reloc (void);
unsigned long post_time_ms (unsigned long base);
23 years ago
extern struct post_test post_list[];
extern unsigned int post_list_size;
extern int post_hotkeys_pressed(void);
23 years ago
#endif /* __ASSEMBLY__ */
#define CFG_POST_RTC 0x00000001
#define CFG_POST_WATCHDOG 0x00000002
#define CFG_POST_MEMORY 0x00000004
#define CFG_POST_CPU 0x00000008
#define CFG_POST_I2C 0x00000010
#define CFG_POST_CACHE 0x00000020
#define CFG_POST_UART 0x00000040
#define CFG_POST_ETHER 0x00000080
#define CFG_POST_SPI 0x00000100
#define CFG_POST_USB 0x00000200
#define CFG_POST_SPR 0x00000400
#define CFG_POST_SYSMON 0x00000800
#define CFG_POST_DSP 0x00001000
#define CFG_POST_OCM 0x00002000
#define CFG_POST_FPU 0x00004000
#define CFG_POST_ECC 0x00008000
#define CFG_POST_BSPEC1 0x00010000
#define CFG_POST_BSPEC2 0x00020000
#define CFG_POST_BSPEC3 0x00040000
#define CFG_POST_BSPEC4 0x00080000
#define CFG_POST_BSPEC5 0x00100000
#define CFG_POST_CODEC 0x00200000
23 years ago
#endif /* CONFIG_POST */
#endif /* _POST_H */