avr32: add support for EarthLCD Favr-32 board
This patch adds support for the Favr-32 board made by EarthLCD.
This kit, which is also called ezLCD-101 when running with EarthLCD firmware,
has a 10.4" touch screen LCD panel, 16 MB 32-bit SDRAM, 8 MB parallel flash,
Ethernet, audio out, USB device, SD-card slot, USART and various other
connectors for cennecting stuff to SPI, I2C, GPIO, etc.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17 years ago
|
|
|
/*
|
|
|
|
* Copyright (C) 2008 Atmel Corporation
|
|
|
|
*
|
|
|
|
* See file CREDITS for list of people who contributed to this project.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
|
|
* under the terms of the GNU General Public License as published by the Free
|
|
|
|
* Software Foundation; either version 2 of the License, or (at your option)
|
|
|
|
* any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
|
|
* more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License along with
|
|
|
|
* this program; if not, write to the Free Software Foundation, Inc., 59 Temple
|
|
|
|
* Place, Suite 330, Boston, MA 02111-1307 USA
|
|
|
|
*/
|
|
|
|
#include <common.h>
|
|
|
|
|
|
|
|
#ifdef CONFIG_FAVR32_EZKIT_EXT_FLASH
|
|
|
|
#include <asm/cacheflush.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/sections.h>
|
|
|
|
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
|
|
|
|
flash_info_t flash_info[1];
|
|
|
|
|
|
|
|
static void flash_identify(uint16_t *flash, flash_info_t *info)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
flags = disable_interrupts();
|
|
|
|
|
|
|
|
dcache_flush_unlocked();
|
|
|
|
|
|
|
|
writew(0xaa, flash + 0x555);
|
|
|
|
writew(0x55, flash + 0xaaa);
|
|
|
|
writew(0x90, flash + 0x555);
|
|
|
|
info->flash_id = readl(flash);
|
|
|
|
writew(0xff, flash);
|
|
|
|
|
|
|
|
readw(flash);
|
|
|
|
|
|
|
|
if (flags)
|
|
|
|
enable_interrupts();
|
|
|
|
}
|
|
|
|
|
|
|
|
unsigned long flash_init(void)
|
|
|
|
{
|
|
|
|
unsigned long addr;
|
|
|
|
unsigned int i;
|
|
|
|
|
|
|
|
flash_info[0].size = CONFIG_SYS_FLASH_SIZE;
|
avr32: add support for EarthLCD Favr-32 board
This patch adds support for the Favr-32 board made by EarthLCD.
This kit, which is also called ezLCD-101 when running with EarthLCD firmware,
has a 10.4" touch screen LCD panel, 16 MB 32-bit SDRAM, 8 MB parallel flash,
Ethernet, audio out, USB device, SD-card slot, USART and various other
connectors for cennecting stuff to SPI, I2C, GPIO, etc.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17 years ago
|
|
|
flash_info[0].sector_count = 135;
|
|
|
|
|
|
|
|
flash_identify(uncached((void *)CONFIG_SYS_FLASH_BASE), &flash_info[0]);
|
avr32: add support for EarthLCD Favr-32 board
This patch adds support for the Favr-32 board made by EarthLCD.
This kit, which is also called ezLCD-101 when running with EarthLCD firmware,
has a 10.4" touch screen LCD panel, 16 MB 32-bit SDRAM, 8 MB parallel flash,
Ethernet, audio out, USB device, SD-card slot, USART and various other
connectors for cennecting stuff to SPI, I2C, GPIO, etc.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17 years ago
|
|
|
|
|
|
|
for (i = 0, addr = 0; i < 8; i++, addr += 0x2000)
|
|
|
|
flash_info[0].start[i] = addr;
|
|
|
|
for (; i < flash_info[0].sector_count; i++, addr += 0x10000)
|
|
|
|
flash_info[0].start[i] = addr;
|
|
|
|
|
|
|
|
return CONFIG_SYS_FLASH_SIZE;
|
avr32: add support for EarthLCD Favr-32 board
This patch adds support for the Favr-32 board made by EarthLCD.
This kit, which is also called ezLCD-101 when running with EarthLCD firmware,
has a 10.4" touch screen LCD panel, 16 MB 32-bit SDRAM, 8 MB parallel flash,
Ethernet, audio out, USB device, SD-card slot, USART and various other
connectors for cennecting stuff to SPI, I2C, GPIO, etc.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17 years ago
|
|
|
}
|
|
|
|
|
|
|
|
void flash_print_info(flash_info_t *info)
|
|
|
|
{
|
|
|
|
printf("Flash: Vendor ID: 0x%02lx, Product ID: 0x%02lx\n",
|
avr32: add support for EarthLCD Favr-32 board
This patch adds support for the Favr-32 board made by EarthLCD.
This kit, which is also called ezLCD-101 when running with EarthLCD firmware,
has a 10.4" touch screen LCD panel, 16 MB 32-bit SDRAM, 8 MB parallel flash,
Ethernet, audio out, USB device, SD-card slot, USART and various other
connectors for cennecting stuff to SPI, I2C, GPIO, etc.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17 years ago
|
|
|
info->flash_id >> 16, info->flash_id & 0xffff);
|
|
|
|
printf("Size: %ld MB in %d sectors\n",
|
|
|
|
info->size >> 10, info->sector_count);
|
|
|
|
}
|
|
|
|
|
|
|
|
int flash_erase(flash_info_t *info, int s_first, int s_last)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
unsigned long start_time;
|
|
|
|
uint16_t *fb, *sb;
|
|
|
|
unsigned int i;
|
|
|
|
int ret;
|
|
|
|
uint16_t status;
|
|
|
|
|
|
|
|
if ((s_first < 0) || (s_first > s_last)
|
|
|
|
|| (s_last >= info->sector_count)) {
|
|
|
|
puts("Error: first and/or last sector out of range\n");
|
|
|
|
return ERR_INVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = s_first; i < s_last; i++)
|
|
|
|
if (info->protect[i]) {
|
|
|
|
printf("Error: sector %d is protected\n", i);
|
|
|
|
return ERR_PROTECTED;
|
|
|
|
}
|
|
|
|
|
|
|
|
fb = (uint16_t *)uncached(info->start[0]);
|
|
|
|
|
|
|
|
dcache_flush_unlocked();
|
|
|
|
|
|
|
|
for (i = s_first; (i <= s_last) && !ctrlc(); i++) {
|
|
|
|
printf("Erasing sector %3d...", i);
|
|
|
|
|
|
|
|
sb = (uint16_t *)uncached(info->start[i]);
|
|
|
|
|
|
|
|
flags = disable_interrupts();
|
|
|
|
|
|
|
|
start_time = get_timer(0);
|
|
|
|
|
|
|
|
/* Unlock sector */
|
|
|
|
writew(0xaa, fb + 0x555);
|
|
|
|
writew(0x70, sb);
|
|
|
|
|
|
|
|
/* Erase sector */
|
|
|
|
writew(0xaa, fb + 0x555);
|
|
|
|
writew(0x55, fb + 0xaaa);
|
|
|
|
writew(0x80, fb + 0x555);
|
|
|
|
writew(0xaa, fb + 0x555);
|
|
|
|
writew(0x55, fb + 0xaaa);
|
|
|
|
writew(0x30, sb);
|
|
|
|
|
|
|
|
/* Wait for completion */
|
|
|
|
ret = ERR_OK;
|
|
|
|
do {
|
|
|
|
/* TODO: Timeout */
|
|
|
|
status = readw(sb);
|
|
|
|
} while ((status != 0xffff) && !(status & 0x28));
|
|
|
|
|
|
|
|
writew(0xf0, fb);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Make sure the command actually makes it to the bus
|
|
|
|
* before we re-enable interrupts.
|
|
|
|
*/
|
|
|
|
readw(fb);
|
|
|
|
|
|
|
|
if (flags)
|
|
|
|
enable_interrupts();
|
|
|
|
|
|
|
|
if (status != 0xffff) {
|
|
|
|
printf("Flash erase error at address 0x%p: 0x%02x\n",
|
|
|
|
sb, status);
|
|
|
|
ret = ERR_PROG_ERROR;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ctrlc())
|
|
|
|
printf("User interrupt!\n");
|
|
|
|
|
|
|
|
return ERR_OK;
|
|
|
|
}
|
|
|
|
|
|
|
|
int write_buff(flash_info_t *info, uchar *src,
|
|
|
|
ulong addr, ulong count)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
uint16_t *base, *p, *s, *end;
|
|
|
|
uint16_t word, status, status1;
|
|
|
|
int ret = ERR_OK;
|
|
|
|
|
|
|
|
if (addr < info->start[0]
|
|
|
|
|| (addr + count) > (info->start[0] + info->size)
|
|
|
|
|| (addr + count) < addr) {
|
|
|
|
puts("Error: invalid address range\n");
|
|
|
|
return ERR_INVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (addr & 1 || count & 1 || (unsigned int)src & 1) {
|
|
|
|
puts("Error: misaligned source, destination or count\n");
|
|
|
|
return ERR_ALIGN;
|
|
|
|
}
|
|
|
|
|
|
|
|
base = (uint16_t *)uncached(info->start[0]);
|
|
|
|
end = (uint16_t *)uncached(addr + count);
|
|
|
|
|
|
|
|
flags = disable_interrupts();
|
|
|
|
|
|
|
|
dcache_flush_unlocked();
|
|
|
|
sync_write_buffer();
|
|
|
|
|
|
|
|
for (p = (uint16_t *)uncached(addr), s = (uint16_t *)src;
|
|
|
|
p < end && !ctrlc(); p++, s++) {
|
|
|
|
word = *s;
|
|
|
|
|
|
|
|
writew(0xaa, base + 0x555);
|
|
|
|
writew(0x55, base + 0xaaa);
|
|
|
|
writew(0xa0, base + 0x555);
|
|
|
|
writew(word, p);
|
|
|
|
|
|
|
|
sync_write_buffer();
|
|
|
|
|
|
|
|
/* Wait for completion */
|
|
|
|
status1 = readw(p);
|
|
|
|
do {
|
|
|
|
/* TODO: Timeout */
|
|
|
|
status = status1;
|
|
|
|
status1 = readw(p);
|
|
|
|
} while (((status ^ status1) & 0x40) /* toggled */
|
|
|
|
&& !(status1 & 0x28)); /* error bits */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We'll need to check once again for toggle bit
|
|
|
|
* because the toggle bit may stop toggling as I/O5
|
|
|
|
* changes to "1" (ref at49bv642.pdf p9)
|
|
|
|
*/
|
|
|
|
status1 = readw(p);
|
|
|
|
status = readw(p);
|
|
|
|
if ((status ^ status1) & 0x40) {
|
|
|
|
printf("Flash write error at address 0x%p: "
|
|
|
|
"0x%02x != 0x%02x\n",
|
|
|
|
p, status,word);
|
|
|
|
ret = ERR_PROG_ERROR;
|
|
|
|
writew(0xf0, base);
|
|
|
|
readw(base);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
writew(0xf0, base);
|
|
|
|
readw(base);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (flags)
|
|
|
|
enable_interrupts();
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
#endif /* CONFIG_FAVR32_EZKIT_EXT_FLASH */
|