upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/arch/powerpc/cpu/mpc85xx/interrupts.c

127 lines
3.4 KiB

/*
* (C) Copyright 2000-2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2002 (440 port)
* Scott McNutt, Artesyn Communication Producs, smcnutt@artsyncp.com
*
* (C) Copyright 2003 Motorola Inc. (MPC85xx port)
* Xianghua Xiao (X.Xiao@motorola.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <watchdog.h>
#include <command.h>
#include <asm/processor.h>
#include <asm/io.h>
#ifdef CONFIG_POST
#include <post.h>
#endif
int interrupt_init_cpu(unsigned int *decrementer_count)
{
ccsr_pic_t __iomem *pic = (void *)CONFIG_SYS_MPC8xxx_PIC_ADDR;
#ifdef CONFIG_POST
/*
* The POST word is stored in the PIC's TFRR register which gets
* cleared when the PIC is reset. Save it off so we can restore it
* later.
*/
ulong post_word = post_word_load();
#endif
out_be32(&pic->gcr, MPC85xx_PICGCR_RST);
while (in_be32(&pic->gcr) & MPC85xx_PICGCR_RST)
;
out_be32(&pic->gcr, MPC85xx_PICGCR_M);
in_be32(&pic->gcr);
*decrementer_count = get_tbclk() / CONFIG_SYS_HZ;
/* PIE is same as DIE, dec interrupt enable */
mtspr(SPRN_TCR, TCR_PIE);
#ifdef CONFIG_INTERRUPTS
pic->iivpr1 = 0x810001; /* 50220 enable ecm interrupts */
debug("iivpr1@%x = %x\n", (uint)&pic->iivpr1, pic->iivpr1);
pic->iivpr2 = 0x810002; /* 50240 enable ddr interrupts */
debug("iivpr2@%x = %x\n", (uint)&pic->iivpr2, pic->iivpr2);
pic->iivpr3 = 0x810003; /* 50260 enable lbc interrupts */
debug("iivpr3@%x = %x\n", (uint)&pic->iivpr3, pic->iivpr3);
#ifdef CONFIG_PCI1
pic->iivpr8 = 0x810008; /* enable pci1 interrupts */
debug("iivpr8@%x = %x\n", (uint)&pic->iivpr8, pic->iivpr8);
#endif
#if defined(CONFIG_PCI2) || defined(CONFIG_PCIE2)
pic->iivpr9 = 0x810009; /* enable pci1 interrupts */
debug("iivpr9@%x = %x\n", (uint)&pic->iivpr9, pic->iivpr9);
#endif
#ifdef CONFIG_PCIE1
pic->iivpr10 = 0x81000a; /* enable pcie1 interrupts */
debug("iivpr10@%x = %x\n", (uint)&pic->iivpr10, pic->iivpr10);
#endif
#ifdef CONFIG_PCIE3
pic->iivpr11 = 0x81000b; /* enable pcie3 interrupts */
debug("iivpr11@%x = %x\n", (uint)&pic->iivpr11, pic->iivpr11);
#endif
pic->ctpr=0; /* 40080 clear current task priority register */
#endif
#ifdef CONFIG_POST
post_word_store(post_word);
#endif
return (0);
}
/* Install and free a interrupt handler. Not implemented yet. */
void
irq_install_handler(int vec, interrupt_handler_t *handler, void *arg)
{
return;
}
void
irq_free_handler(int vec)
{
return;
}
void timer_interrupt_cpu(struct pt_regs *regs)
{
/* PIS is same as DIS, dec interrupt status */
mtspr(SPRN_TSR, TSR_PIS);
}
#if defined(CONFIG_CMD_IRQ)
/* irqinfo - print information about PCI devices,not implemented. */
int do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
return 0;
}
#endif