upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/post/board/lwmon5/gdc.c

364 lines
7.7 KiB

/*
* (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com
*
* Developed for DENX Software Engineering GmbH
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
/* This test attempts to verify board GDC. A scratch register tested, then
* simple memory test (get_ram_size()) run over GDC memory.
*/
#include <post.h>
#include <watchdog.h>
#include <asm/io.h>
#include <video.h>
DECLARE_GLOBAL_DATA_PTR;
#define GDC_SCRATCH_REG 0xC1FF8044
#define GDC_VERSION_REG 0xC1FF8084
#define GDC_HOST_BASE 0xC1FC0000
#define GDC_RAM_START 0xC0000000
#define GDC_RAM_END (GDC_HOST_BASE - 1)
#define GDC_RAM_SIZE (GDC_RAM_END - GDC_RAM_START)
#if CONFIG_POST & CONFIG_SYS_POST_BSPEC4
const static unsigned long pattern[] = {
0xffffffff,
0xaaaaaaaa,
0xcccccccc,
0xf0f0f0f0,
0xff00ff00,
0xffff0000,
0x0000ffff,
0x00ff00ff,
0x0f0f0f0f,
0x33333333,
0x55555555,
0x00000000
};
const static unsigned long otherpattern = 0x01234567;
/* test write/read og a given LIME Register */
static int gdc_test_reg_one(uint value)
{
uint read_value;
/* write test pattern */
out_be32((void *)GDC_SCRATCH_REG, value);
/* read other location (protect against data lines capacity) */
in_be32((void *)GDC_RAM_START);
/* verify test pattern */
read_value = in_be32((void *)GDC_SCRATCH_REG);
if (read_value != value) {
post_log("GDC SCRATCH test failed write %08X, read %08X\n",
value, read_value);
}
return (read_value != value);
}
/* test with a given static 32 bit pattern in a given memory addressrange */
static int gdc_post_test1(ulong *start, ulong size, ulong val)
{
int ret = 0;
ulong i = 0;
ulong *mem = start;
ulong readback;
for (i = 0; i < size / sizeof(ulong); i++) {
mem[i] = val;
if (i % 1024 == 0)
WATCHDOG_RESET();
}
for (i = 0; i < size / sizeof(ulong); i++) {
readback = mem[i];
if (readback != val) {
post_log("GDC Memory error at %08x, "
"wrote %08x, read %08x !\n",
mem + i, val, readback);
ret = -1;
break;
}
if (i % 1024 == 0)
WATCHDOG_RESET();
}
return ret;
}
/* test with dynamic 32 bit pattern in a given memory addressrange */
static int gdc_post_test2(ulong *start, ulong size)
{
int ret = 0;
ulong i = 0;
ulong *mem = start;
ulong readback;
for (i = 0; i < size / sizeof(ulong); i++) {
mem[i] = 1 << (i % 32);
if (i % 1024 == 0)
WATCHDOG_RESET();
}
for (i = 0; i < size / sizeof(ulong); i++) {
readback = mem[i];
if (readback != 1 << (i % 32)) {
post_log("GDC Memory error at %08x, "
"wrote %08x, read %08x !\n",
mem + i, 1 << (i % 32), readback);
ret = -1;
break;
}
if (i % 1024 == 0)
WATCHDOG_RESET();
}
return ret;
}
/* test with dynamic 32 bit pattern in a given memory addressrange */
static int gdc_post_test3(ulong *start, ulong size)
{
int ret = 0;
ulong i = 0;
ulong *mem = start;
ulong readback;
for (i = 0; i < size / sizeof(ulong); i++) {
mem[i] = i;
if (i % 1024 == 0)
WATCHDOG_RESET();
}
for (i = 0; i < size / sizeof(ulong); i++) {
readback = mem[i];
if (readback != i) {
post_log("GDC Memory error at %08x, "
"wrote %08x, read %08x !\n",
mem + i, i, readback);
ret = -1;
break;
}
if (i % 1024 == 0)
WATCHDOG_RESET();
}
return ret;
}
/* test with dynamic 32 bit pattern in a given memory addressrange */
static int gdc_post_test4(ulong *start, ulong size)
{
int ret = 0;
ulong i = 0;
ulong *mem = start;
ulong readback;
for (i = 0; i < size / sizeof(ulong); i++) {
mem[i] = ~i;
if (i % 1024 == 0)
WATCHDOG_RESET();
}
for (i = 0; i < size / sizeof(ulong); i++) {
readback = mem[i];
if (readback != ~i) {
post_log("GDC Memory error at %08x, "
"wrote %08x, read %08x !\n",
mem + i, ~i, readback);
ret = -1;
break;
}
if (i % 1024 == 0)
WATCHDOG_RESET();
}
return ret;
}
/* do some patterntests in a given addressrange */
int gdc_mem_test(ulong *start, ulong size)
{
int ret = 0;
/*
* check addressrange and do different static and dynamic
* pattern tests with it.
*/
if (((void *)start) + size <= (void *)GDC_RAM_END) {
if (ret == 0)
ret = gdc_post_test1(start, size, 0x00000000);
if (ret == 0)
ret = gdc_post_test1(start, size, 0xffffffff);
if (ret == 0)
ret = gdc_post_test1(start, size, 0x55555555);
if (ret == 0)
ret = gdc_post_test1(start, size, 0xaaaaaaaa);
if (ret == 0)
ret = gdc_post_test2(start, size);
if (ret == 0)
ret = gdc_post_test3(start, size);
if (ret == 0)
ret = gdc_post_test4(start, size);
}
return ret;
}
/* test function of gdc memory addresslines*/
static int gdc_post_addrline(ulong *address, ulong *base, ulong size)
{
ulong *target;
ulong *end;
ulong readback = 0;
ulong xor = 0;
int ret = 0;
end = (ulong *)((ulong)base + size);
for (xor = sizeof(long); xor > 0; xor <<= 1) {
target = (ulong *)((ulong)address ^ xor);
if ((target >= base) && (target < end)) {
*address = ~*target;
readback = *target;
}
if (readback == *address) {
post_log("GDC Memory (address line) error at %08x"
"XOR value %08x !\n",
address, target , xor);
ret = -1;
break;
}
}
return ret;
}
static int gdc_post_dataline(ulong *address)
{
unsigned long temp32 = 0;
int i = 0;
int ret = 0;
for (i = 0; i < ARRAY_SIZE(pattern); i++) {
*address = pattern[i];
/*
* Put a different pattern on the data lines: otherwise they
* may float long enough to read back what we wrote.
*/
*(address + 1) = otherpattern;
temp32 = *address;
if (temp32 != pattern[i]){
post_log("GDC Memory (date line) error at %08x, "
"wrote %08x, read %08x !\n",
address, pattern[i], temp32);
ret = 1;
}
}
return ret;
}
/* Verify GDC, get memory size, verify GDC memory */
int gdc_post_test(int flags)
{
uint old_value;
int i = 0;
int ret = 0;
post_log("\n");
old_value = in_be32((void *)GDC_SCRATCH_REG);
/*
* GPIOC2 register behaviour: the LIME graphics processor has a
* maximum of 5 GPIO ports that can be used in this hardware
* configuration. Thus only the bits for these 5 GPIOs can be
* activated in the GPIOC2 register. All other bits will always be
* read as zero.
*/
if (gdc_test_reg_one(0x00150015))
ret = 1;
if (gdc_test_reg_one(0x000A000A))
ret = 1;
out_be32((void *)GDC_SCRATCH_REG, old_value);
old_value = in_be32((void *)GDC_VERSION_REG);
post_log("GDC chip version %u.%u, year %04X\n",
(old_value >> 8) & 0xFF, old_value & 0xFF,
(old_value >> 16) & 0xFFFF);
old_value = get_ram_size((void *)GDC_RAM_START,
0x02000000);
debug("GDC RAM size (ist): %d bytes\n", old_value);
debug("GDC RAM size (soll): %d bytes\n", GDC_RAM_SIZE);
post_log("GDC RAM size: %d bytes\n", old_value);
/* Test SDRAM datalines */
if (gdc_post_dataline((ulong *)GDC_RAM_START)) {
ret = 1;
goto out;
}
WATCHDOG_RESET();
/* Test SDRAM adresslines */
if (gdc_post_addrline((ulong *)GDC_RAM_START,
(ulong *)GDC_RAM_START, GDC_RAM_SIZE)) {
ret = 1;
goto out;
}
WATCHDOG_RESET();
if (gdc_post_addrline((ulong *)GDC_RAM_END - sizeof(long),
(ulong *)GDC_RAM_START, GDC_RAM_SIZE)) {
ret = 1;
goto out;
}
WATCHDOG_RESET();
/* memory pattern test */
debug("GDC Memory test (flags %8x:%8x)\n", flags,
POST_SLOWTEST | POST_MANUAL);
if (flags & POST_MANUAL) {
debug("Full memory test\n");
if (gdc_mem_test((ulong *)GDC_RAM_START, GDC_RAM_SIZE)) {
ret = 1;
goto out;
}
/* load splashscreen again */
} else {
debug("smart memory test\n");
for (i = 0; i < (GDC_RAM_SIZE >> 20) && ret == 0; i++) {
if (ret == 0)
ret = gdc_mem_test((ulong *)(GDC_RAM_START +
(i << 20)),
0x800);
if (ret == 0)
ret = gdc_mem_test((ulong *)(GDC_RAM_START +
(i << 20) + 0xff800),
0x800);
}
}
WATCHDOG_RESET();
out:
return ret;
}
#endif /* CONFIG_POST & CONFIG_SYS_POST_BSPEC4 */