upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/cpu/mpc83xx/i2c.c

252 lines
4.8 KiB

/*
* (C) Copyright 2003,Motorola Inc.
* Xianghua Xiao <x.xiao@motorola.com>
* Adapted for Motorola 85xx chip.
*
* (C) Copyright 2003
* Gleb Natapov <gnatapov@mrv.com>
* Some bits are taken from linux driver writen by adrian@humboldt.co.uk
*
* Hardware I2C driver for MPC107 PCI bridge.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
* Change log:
*
* 20050101: Eran Liberty (liberty@freescale.com)
* Initial file creating (porting from 85XX & 8260)
*/
#include <common.h>
#include <command.h>
#include <asm/io.h>
#ifdef CONFIG_HARD_I2C
#include <i2c.h>
#include <asm/i2c.h>
#ifdef CONFIG_MPC8349ADS
i2c_t * mpc8349_i2c = (i2c_t*)(CFG_IMMRBAR + CFG_I2C_OFFSET);
#endif
void
i2c_init(int speed, int slaveadd)
{
/* stop I2C controller */
writeb(0x00 , &I2C->cr);
/* set clock */
writeb(0x3f, &I2C->fdr);
/* set default filter */
writeb(0x10,&I2C->dfsrr);
/* write slave address */
writeb(slaveadd, &I2C->adr);
/* clear status register */
writeb(0x00, &I2C->sr);
/* start I2C controller */
writeb(I2C_CR_MEN, &I2C->cr);
}
static __inline__ int
i2c_wait4bus (void)
{
ulong timeval = get_timer (0);
while (readb(&I2C->sr) & I2C_SR_MBB) {
if (get_timer (timeval) > I2C_TIMEOUT) {
return -1;
}
}
return 0;
}
static __inline__ int
i2c_wait (int write)
{
u32 csr;
ulong timeval = get_timer(0);
do {
csr = readb(&I2C->sr);
if (!(csr & I2C_SR_MIF))
continue;
writeb(0x0, &I2C->sr);
if (csr & I2C_SR_MAL) {
debug("i2c_wait: MAL\n");
return -1;
}
if (!(csr & I2C_SR_MCF)) {
debug("i2c_wait: unfinished\n");
return -1;
}
if (write == I2C_WRITE && (csr & I2C_SR_RXAK)) {
debug("i2c_wait: No RXACK\n");
return -1;
}
return 0;
} while (get_timer (timeval) < I2C_TIMEOUT);
debug("i2c_wait: timed out\n");
}
static __inline__ int
i2c_write_addr (u8 dev, u8 dir, int rsta)
{
writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX |
(rsta?I2C_CR_RSTA:0),
&I2C->cr);
writeb((dev << 1) | dir, &I2C->dr);
if (i2c_wait (I2C_WRITE) < 0)
return 0;
return 1;
}
static __inline__ int
__i2c_write (u8 *data, int length)
{
int i;
writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX,
&I2C->cr);
for (i=0; i < length; i++) {
writeb(data[i], &I2C->dr);
if (i2c_wait (I2C_WRITE) < 0)
break;
}
return i;
}
static __inline__ int
__i2c_read (u8 *data, int length)
{
int i;
writeb(I2C_CR_MEN | I2C_CR_MSTA |
((length == 1) ? I2C_CR_TXAK : 0),
&I2C->cr);
/* dummy read */
readb(&I2C->dr);
for (i=0; i < length; i++) {
if (i2c_wait (I2C_READ) < 0)
break;
/* Generate ack on last next to last byte */
if (i == length - 2)
writeb(I2C_CR_MEN | I2C_CR_MSTA |
I2C_CR_TXAK,
&I2C->cr);
/* Generate stop on last byte */
if (i == length - 1)
writeb(I2C_CR_MEN | I2C_CR_TXAK, &I2C->cr);
data[i] = readb(&I2C->dr);
}
return i;
}
int
i2c_read (u8 dev, uint addr, int alen, u8 *data, int length)
{
int i = 0;
u8 *a = (u8*)&addr;
if (i2c_wait4bus () < 0)
goto exit;
if (i2c_write_addr (dev, I2C_WRITE, 0) == 0)
goto exit;
if (__i2c_write (&a[4 - alen], alen) != alen)
goto exit;
if (i2c_write_addr (dev, I2C_READ, 1) == 0)
goto exit;
i = __i2c_read (data, length);
exit:
writeb(I2C_CR_MEN, &I2C->cr);
return !(i == length);
}
int
i2c_write (u8 dev, uint addr, int alen, u8 *data, int length)
{
int i = 0;
u8 *a = (u8*)&addr;
if (i2c_wait4bus () < 0)
goto exit;
if (i2c_write_addr (dev, I2C_WRITE, 0) == 0)
goto exit;
if (__i2c_write (&a[4 - alen], alen) != alen)
goto exit;
i = __i2c_write (data, length);
exit:
writeb(I2C_CR_MEN, &I2C->cr);
return !(i == length);
}
int i2c_probe (uchar chip)
{
int tmp;
/*
* Try to read the first location of the chip. The underlying
* driver doesn't appear to support sending just the chip address
* and looking for an <ACK> back.
*/
udelay(10000);
return i2c_read (chip, 0, 1, (char *)&tmp, 1);
}
uchar i2c_reg_read (uchar i2c_addr, uchar reg)
{
char buf[1];
i2c_read (i2c_addr, reg, 1, buf, 1);
return (buf[0]);
}
void i2c_reg_write (uchar i2c_addr, uchar reg, uchar val)
{
i2c_write (i2c_addr, reg, 1, &val, 1);
}
#endif /* CONFIG_HARD_I2C */