|
|
|
/*
|
|
|
|
* (C) Copyright 2007
|
|
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
|
|
*
|
|
|
|
* Author: Igor Lisitsin <igor@emcraft.com>
|
|
|
|
*
|
|
|
|
* See file CREDITS for list of people who contributed to this
|
|
|
|
* project.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU General Public License as
|
|
|
|
* published by the Free Software Foundation; either version 2 of
|
|
|
|
* the License, or (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
|
|
* MA 02111-1307 USA
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <common.h>
|
|
|
|
|
|
|
|
/*
|
|
|
|
* UART test
|
|
|
|
*
|
|
|
|
* The controllers are configured to loopback mode and several
|
|
|
|
* characters are transmitted.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <post.h>
|
|
|
|
|
|
|
|
#if CONFIG_POST & CONFIG_SYS_POST_UART
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This table defines the UART's that should be tested and can
|
|
|
|
* be overridden in the board config file
|
|
|
|
*/
|
|
|
|
#ifndef CONFIG_SYS_POST_UART_TABLE
|
|
|
|
#define CONFIG_SYS_POST_UART_TABLE {UART0_BASE, UART1_BASE, UART2_BASE, UART3_BASE}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#include <asm/processor.h>
|
|
|
|
#include <serial.h>
|
|
|
|
|
|
|
|
#if defined(CONFIG_440)
|
|
|
|
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
|
|
|
|
defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
|
|
|
|
#define UART0_BASE CONFIG_SYS_PERIPHERAL_BASE + 0x00000300
|
|
|
|
#define UART1_BASE CONFIG_SYS_PERIPHERAL_BASE + 0x00000400
|
|
|
|
#define UART2_BASE CONFIG_SYS_PERIPHERAL_BASE + 0x00000500
|
|
|
|
#define UART3_BASE CONFIG_SYS_PERIPHERAL_BASE + 0x00000600
|
|
|
|
#else
|
|
|
|
#define UART0_BASE CONFIG_SYS_PERIPHERAL_BASE + 0x00000200
|
|
|
|
#define UART1_BASE CONFIG_SYS_PERIPHERAL_BASE + 0x00000300
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
|
|
|
|
#define UART2_BASE CONFIG_SYS_PERIPHERAL_BASE + 0x00000600
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#if defined(CONFIG_440GP)
|
|
|
|
#define CR0_MASK 0x3fff0000
|
|
|
|
#define CR0_EXTCLK_ENA 0x00600000
|
|
|
|
#define CR0_UDIV_POS 16
|
|
|
|
#define UDIV_SUBTRACT 1
|
|
|
|
#define UART0_SDR CPC0_CR0
|
|
|
|
#define MFREG(a, d) d = mfdcr(a)
|
|
|
|
#define MTREG(a, d) mtdcr(a, d)
|
|
|
|
#else /* #if defined(CONFIG_440GP) */
|
|
|
|
/* all other 440 PPC's access clock divider via sdr register */
|
|
|
|
#define CR0_MASK 0xdfffffff
|
|
|
|
#define CR0_EXTCLK_ENA 0x00800000
|
|
|
|
#define CR0_UDIV_POS 0
|
|
|
|
#define UDIV_SUBTRACT 0
|
|
|
|
#define UART0_SDR SDR0_UART0
|
|
|
|
#define UART1_SDR SDR0_UART1
|
|
|
|
#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
|
|
|
|
defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \
|
|
|
|
defined(CONFIG_440SP) || defined(CONFIG_440SPE)
|
|
|
|
#define UART2_SDR SDR0_UART2
|
|
|
|
#endif
|
|
|
|
#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
|
|
|
|
defined(CONFIG_440GR) || defined(CONFIG_440GRX)
|
|
|
|
#define UART3_SDR SDR0_UART3
|
|
|
|
#endif
|
|
|
|
#define MFREG(a, d) mfsdr(a, d)
|
|
|
|
#define MTREG(a, d) mtsdr(a, d)
|
|
|
|
#endif /* #if defined(CONFIG_440GP) */
|
|
|
|
#elif defined(CONFIG_405EP) || defined(CONFIG_405EZ)
|
|
|
|
#define UART0_BASE 0xef600300
|
|
|
|
#define UART1_BASE 0xef600400
|
|
|
|
#define UCR0_MASK 0x0000007f
|
|
|
|
#define UCR1_MASK 0x00007f00
|
|
|
|
#define UCR0_UDIV_POS 0
|
|
|
|
#define UCR1_UDIV_POS 8
|
|
|
|
#define UDIV_MAX 127
|
|
|
|
#elif defined(CONFIG_405EX)
|
|
|
|
#define UART0_BASE 0xef600200
|
|
|
|
#define UART1_BASE 0xef600300
|
|
|
|
#define CR0_MASK 0x000000ff
|
|
|
|
#define CR0_EXTCLK_ENA 0x00800000
|
|
|
|
#define CR0_UDIV_POS 0
|
|
|
|
#define UDIV_SUBTRACT 0
|
|
|
|
#define UART0_SDR SDR0_UART0
|
|
|
|
#define UART1_SDR SDR0_UART1
|
|
|
|
#define MFREG(a, d) mfsdr(a, d)
|
|
|
|
#define MTREG(a, d) mtsdr(a, d)
|
|
|
|
#else /* CONFIG_405GP || CONFIG_405CR */
|
|
|
|
#define UART0_BASE 0xef600300
|
|
|
|
#define UART1_BASE 0xef600400
|
|
|
|
#define CR0_MASK 0x00001fff
|
|
|
|
#define CR0_EXTCLK_ENA 0x000000c0
|
|
|
|
#define CR0_UDIV_POS 1
|
|
|
|
#define UDIV_MAX 32
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#define UART_RBR 0x00
|
|
|
|
#define UART_THR 0x00
|
|
|
|
#define UART_IER 0x01
|
|
|
|
#define UART_IIR 0x02
|
|
|
|
#define UART_FCR 0x02
|
|
|
|
#define UART_LCR 0x03
|
|
|
|
#define UART_MCR 0x04
|
|
|
|
#define UART_LSR 0x05
|
|
|
|
#define UART_MSR 0x06
|
|
|
|
#define UART_SCR 0x07
|
|
|
|
#define UART_DLL 0x00
|
|
|
|
#define UART_DLM 0x01
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Line Status Register.
|
|
|
|
*/
|
|
|
|
#define asyncLSRDataReady1 0x01
|
|
|
|
#define asyncLSROverrunError1 0x02
|
|
|
|
#define asyncLSRParityError1 0x04
|
|
|
|
#define asyncLSRFramingError1 0x08
|
|
|
|
#define asyncLSRBreakInterrupt1 0x10
|
|
|
|
#define asyncLSRTxHoldEmpty1 0x20
|
|
|
|
#define asyncLSRTxShiftEmpty1 0x40
|
|
|
|
#define asyncLSRRxFifoError1 0x80
|
|
|
|
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
|
|
|
|
#if defined(CONFIG_440) || defined(CONFIG_405EX)
|
|
|
|
#if !defined(CONFIG_SYS_EXT_SERIAL_CLOCK)
|
|
|
|
static void serial_divs (int baudrate, unsigned long *pudiv,
|
|
|
|
unsigned short *pbdiv)
|
|
|
|
{
|
|
|
|
sys_info_t sysinfo;
|
|
|
|
unsigned long div; /* total divisor udiv * bdiv */
|
|
|
|
unsigned long umin; /* minimum udiv */
|
|
|
|
unsigned short diff; /* smallest diff */
|
|
|
|
unsigned long udiv; /* best udiv */
|
|
|
|
unsigned short idiff; /* current diff */
|
|
|
|
unsigned short ibdiv; /* current bdiv */
|
|
|
|
unsigned long i;
|
|
|
|
unsigned long est; /* current estimate */
|
|
|
|
|
|
|
|
get_sys_info(&sysinfo);
|
|
|
|
|
|
|
|
udiv = 32; /* Assume lowest possible serial clk */
|
|
|
|
div = sysinfo.freqPLB / (16 * baudrate); /* total divisor */
|
|
|
|
umin = sysinfo.pllOpbDiv << 1; /* 2 x OPB divisor */
|
|
|
|
diff = 32; /* highest possible */
|
|
|
|
|
|
|
|
/* i is the test udiv value -- start with the largest
|
|
|
|
* possible (32) to minimize serial clock and constrain
|
|
|
|
* search to umin.
|
|
|
|
*/
|
|
|
|
for (i = 32; i > umin; i--) {
|
|
|
|
ibdiv = div / i;
|
|
|
|
est = i * ibdiv;
|
|
|
|
idiff = (est > div) ? (est-div) : (div-est);
|
|
|
|
if (idiff == 0) {
|
|
|
|
udiv = i;
|
|
|
|
break; /* can't do better */
|
|
|
|
} else if (idiff < diff) {
|
|
|
|
udiv = i; /* best so far */
|
|
|
|
diff = idiff; /* update lowest diff*/
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
*pudiv = udiv;
|
|
|
|
*pbdiv = div / udiv;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
static int uart_post_init (unsigned long dev_base)
|
|
|
|
{
|
|
|
|
unsigned long reg = 0;
|
|
|
|
unsigned long udiv;
|
|
|
|
unsigned short bdiv;
|
|
|
|
volatile char val;
|
|
|
|
#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
|
|
|
|
unsigned long tmp;
|
|
|
|
#endif
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < 3500; i++) {
|
|
|
|
if (in8 (dev_base + UART_LSR) & asyncLSRTxHoldEmpty1)
|
|
|
|
break;
|
|
|
|
udelay (100);
|
|
|
|
}
|
|
|
|
MFREG(UART0_SDR, reg);
|
|
|
|
reg &= ~CR0_MASK;
|
|
|
|
|
|
|
|
#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
|
|
|
|
reg |= CR0_EXTCLK_ENA;
|
|
|
|
udiv = 1;
|
|
|
|
tmp = gd->baudrate * 16;
|
|
|
|
bdiv = (CONFIG_SYS_EXT_SERIAL_CLOCK + tmp / 2) / tmp;
|
|
|
|
#else
|
|
|
|
/* For 440, the cpu clock is on divider chain A, UART on divider
|
|
|
|
* chain B ... so cpu clock is irrelevant. Get the "optimized"
|
|
|
|
* values that are subject to the 1/2 opb clock constraint
|
|
|
|
*/
|
|
|
|
serial_divs (gd->baudrate, &udiv, &bdiv);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
reg |= (udiv - UDIV_SUBTRACT) << CR0_UDIV_POS; /* set the UART divisor */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Configure input clock to baudrate generator for all
|
|
|
|
* available serial ports here
|
|
|
|
*/
|
|
|
|
MTREG(UART0_SDR, reg);
|
|
|
|
#if defined(UART1_SDR)
|
|
|
|
MTREG(UART1_SDR, reg);
|
|
|
|
#endif
|
|
|
|
#if defined(UART2_SDR)
|
|
|
|
MTREG(UART2_SDR, reg);
|
|
|
|
#endif
|
|
|
|
#if defined(UART3_SDR)
|
|
|
|
MTREG(UART3_SDR, reg);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
out8(dev_base + UART_LCR, 0x80); /* set DLAB bit */
|
|
|
|
out8(dev_base + UART_DLL, bdiv); /* set baudrate divisor */
|
|
|
|
out8(dev_base + UART_DLM, bdiv >> 8); /* set baudrate divisor */
|
|
|
|
out8(dev_base + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
|
|
|
|
out8(dev_base + UART_FCR, 0x00); /* disable FIFO */
|
|
|
|
out8(dev_base + UART_MCR, 0x10); /* enable loopback mode */
|
|
|
|
val = in8(dev_base + UART_LSR); /* clear line status */
|
|
|
|
val = in8(dev_base + UART_RBR); /* read receive buffer */
|
|
|
|
out8(dev_base + UART_SCR, 0x00); /* set scratchpad */
|
|
|
|
out8(dev_base + UART_IER, 0x00); /* set interrupt enable reg */
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
#else /* CONFIG_440 */
|
|
|
|
|
|
|
|
static int uart_post_init (unsigned long dev_base)
|
|
|
|
{
|
|
|
|
unsigned long reg;
|
|
|
|
unsigned long tmp;
|
|
|
|
unsigned long clk;
|
|
|
|
unsigned long udiv;
|
|
|
|
unsigned short bdiv;
|
|
|
|
volatile char val;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < 3500; i++) {
|
|
|
|
if (in8 (dev_base + UART_LSR) & asyncLSRTxHoldEmpty1)
|
|
|
|
break;
|
|
|
|
udelay (100);
|
|
|
|
}
|
|
|
|
|
|
|
|
#if defined(CONFIG_405EZ)
|
|
|
|
serial_divs(gd->baudrate, &udiv, &bdiv);
|
|
|
|
clk = tmp = reg = 0;
|
|
|
|
#else
|
|
|
|
#ifdef CONFIG_405EP
|
|
|
|
reg = mfdcr(CPC0_UCR) & ~(UCR0_MASK | UCR1_MASK);
|
|
|
|
clk = gd->cpu_clk;
|
|
|
|
tmp = CONFIG_SYS_BASE_BAUD * 16;
|
|
|
|
udiv = (clk + tmp / 2) / tmp;
|
|
|
|
if (udiv > UDIV_MAX) /* max. n bits for udiv */
|
|
|
|
udiv = UDIV_MAX;
|
|
|
|
reg |= (udiv) << UCR0_UDIV_POS; /* set the UART divisor */
|
|
|
|
reg |= (udiv) << UCR1_UDIV_POS; /* set the UART divisor */
|
|
|
|
mtdcr (CPC0_UCR, reg);
|
|
|
|
#else /* CONFIG_405EP */
|
|
|
|
reg = mfdcr(CPC0_CR0) & ~CR0_MASK;
|
|
|
|
#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
|
|
|
|
clk = CONFIG_SYS_EXT_SERIAL_CLOCK;
|
|
|
|
udiv = 1;
|
|
|
|
reg |= CR0_EXTCLK_ENA;
|
|
|
|
#else
|
|
|
|
clk = gd->cpu_clk;
|
|
|
|
#ifdef CONFIG_SYS_405_UART_ERRATA_59
|
|
|
|
udiv = 31; /* Errata 59: stuck at 31 */
|
|
|
|
#else
|
|
|
|
tmp = CONFIG_SYS_BASE_BAUD * 16;
|
|
|
|
udiv = (clk + tmp / 2) / tmp;
|
|
|
|
if (udiv > UDIV_MAX) /* max. n bits for udiv */
|
|
|
|
udiv = UDIV_MAX;
|
|
|
|
#endif
|
|
|
|
#endif
|
|
|
|
reg |= (udiv - 1) << CR0_UDIV_POS; /* set the UART divisor */
|
|
|
|
mtdcr (CPC0_CR0, reg);
|
|
|
|
#endif /* CONFIG_405EP */
|
|
|
|
tmp = gd->baudrate * udiv * 16;
|
|
|
|
bdiv = (clk + tmp / 2) / tmp;
|
|
|
|
#endif /* CONFIG_405EZ */
|
|
|
|
|
|
|
|
out8(dev_base + UART_LCR, 0x80); /* set DLAB bit */
|
|
|
|
out8(dev_base + UART_DLL, bdiv); /* set baudrate divisor */
|
|
|
|
out8(dev_base + UART_DLM, bdiv >> 8); /* set baudrate divisor */
|
|
|
|
out8(dev_base + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
|
|
|
|
out8(dev_base + UART_FCR, 0x00); /* disable FIFO */
|
|
|
|
out8(dev_base + UART_MCR, 0x10); /* enable loopback mode */
|
|
|
|
val = in8(dev_base + UART_LSR); /* clear line status */
|
|
|
|
val = in8(dev_base + UART_RBR); /* read receive buffer */
|
|
|
|
out8(dev_base + UART_SCR, 0x00); /* set scratchpad */
|
|
|
|
out8(dev_base + UART_IER, 0x00); /* set interrupt enable reg */
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_440 */
|
|
|
|
|
|
|
|
static void uart_post_putc (unsigned long dev_base, char c)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
out8 (dev_base + UART_THR, c); /* put character out */
|
|
|
|
|
|
|
|
/* Wait for transfer completion */
|
|
|
|
for (i = 0; i < 3500; i++) {
|
|
|
|
if (in8 (dev_base + UART_LSR) & asyncLSRTxHoldEmpty1)
|
|
|
|
break;
|
|
|
|
udelay (100);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int uart_post_getc (unsigned long dev_base)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
/* Wait for character available */
|
|
|
|
for (i = 0; i < 3500; i++) {
|
|
|
|
if (in8 (dev_base + UART_LSR) & asyncLSRDataReady1)
|
|
|
|
break;
|
|
|
|
udelay (100);
|
|
|
|
}
|
|
|
|
return 0xff & in8 (dev_base + UART_RBR);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int test_ctlr (unsigned long dev_base, int index)
|
|
|
|
{
|
|
|
|
int res = -1;
|
|
|
|
char test_str[] = "*** UART Test String ***\r\n";
|
|
|
|
int i;
|
|
|
|
|
|
|
|
uart_post_init (dev_base);
|
|
|
|
|
|
|
|
for (i = 0; i < sizeof (test_str) - 1; i++) {
|
|
|
|
uart_post_putc (dev_base, test_str[i]);
|
|
|
|
if (uart_post_getc (dev_base) != test_str[i])
|
|
|
|
goto done;
|
|
|
|
}
|
|
|
|
res = 0;
|
|
|
|
done:
|
|
|
|
if (res)
|
|
|
|
post_log ("uart%d test failed\n", index);
|
|
|
|
|
|
|
|
return res;
|
|
|
|
}
|
|
|
|
|
|
|
|
int uart_post_test (int flags)
|
|
|
|
{
|
|
|
|
int i, res = 0;
|
|
|
|
static unsigned long base[] = CONFIG_SYS_POST_UART_TABLE;
|
|
|
|
|
|
|
|
for (i = 0; i < sizeof (base) / sizeof (base[0]); i++) {
|
|
|
|
if (test_ctlr (base[i], i))
|
|
|
|
res = -1;
|
|
|
|
}
|
|
|
|
serial_reinit_all ();
|
|
|
|
|
|
|
|
return res;
|
|
|
|
}
|
|
|
|
|
|
|
|
#endif /* CONFIG_POST & CONFIG_SYS_POST_UART */
|