Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Coding Style cleanup

Browse Source
master
wdenk 20 years ago
parent 652a10c096
commit 082acfd484
21 changed files with 281 additions and 303 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 6
      MAINTAINERS
  2. 14
      board/RPXlite_dw/README
  3. 3
      board/omap2420h4/config.mk
  4. 5
      board/omap2420h4/mem.c
  5. 140
      board/omap2420h4/omap2420h4.c
  6. 194
      board/omap2420h4/platform.S
  7. 8
      board/omap2420h4/u-boot.lds
  8. 4
      cpu/arm1136/cpu.c
  9. 9
      cpu/arm1136/interrupts.c
  10. 154
      cpu/arm1136/start.S
  11. 2
      drivers/8390.h
  12. 22
      drivers/omap24xx_i2c.c
  13. 1
      include/asm-arm/arch-arm1136/bits.h
  14. 1
      include/asm-arm/arch-arm1136/clocks.h
  15. 1
      include/asm-arm/arch-arm1136/omap2420.h
  16. 1
      include/asm-arm/arch-arm1136/rev.h
  17. 1
      include/asm-arm/arch-arm1136/sizes.h
  18. 1
      include/asm-arm/arch-arm1136/sys_info.h
  19. 1
      include/asm-arm/arch-arm1136/sys_proto.h
  20. 4
      include/configs/RPXlite_DW.h
  21. 12
      include/configs/omap2420h4.h

6
MAINTAINERS
Unescape View File

@ -226,8 +226,8 @@ Denis Peter <d.peter@mpl.ch>
PIP405 PPC4xx PIP405 PPC4xx
Daniel Poirot <dan.poirot@windriver.com> Daniel Poirot <dan.poirot@windriver.com>
sbc8240 MPC8240 sbc8240 MPC8240
sbc405 PPC405GP sbc405 PPC405GP
Stefan Roese <stefan.roese@esd-electronics.com> Stefan Roese <stefan.roese@esd-electronics.com>
@ -387,7 +387,7 @@ Rishi Bhattacharya <rishi@ti.com>
omap5912osk ARM926EJS omap5912osk ARM926EJS
Richard Woodruff <r-woodruff2@ti.com> Richard Woodruff <r-woodruff2@ti.com>
omap2420h4 ARM1136EJS omap2420h4 ARM1136EJS
David Müller <d.mueller@elsoft.ch> David Müller <d.mueller@elsoft.ch>

14
board/RPXlite_dw/README
Unescape View File

@ -38,7 +38,7 @@ make all
To support the Platform better,I added LCD panel(NL6448BC20-08) function. To support the Platform better,I added LCD panel(NL6448BC20-08) function.
For the convenience of debug, CONFIG_PERBOOT was supported. So you just For the convenience of debug, CONFIG_PERBOOT was supported. So you just
perss ENTER if you want to get a serial console in boot downcounting. perss ENTER if you want to get a serial console in boot downcounting.
Then you can switch to LCD and serial console freely just typing Then you can switch to LCD and serial console freely just typing
'run lcd' or 'run ser'. They are only vaild when CONFIG_LCD was enabled. 'run lcd' or 'run ser'. They are only vaild when CONFIG_LCD was enabled.
To get a LCD support u-boot,you can do the following: To get a LCD support u-boot,you can do the following:
@ -93,18 +93,18 @@ In the beginning, you could just need very simple defult environment variable se
like[include/configs/RPXlite.h] : like[include/configs/RPXlite.h] :
#define CONFIG_BOOTCOMMAND \ #define CONFIG_BOOTCOMMAND \
"bootp; " \ "bootp; " \
"setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \ "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \
"bootm" "bootm"
This is enough for kernel NFS test. But as debug process goes on, you would expect This is enough for kernel NFS test. But as debug process goes on, you would expect
to save some time on environment variable setting and u-boot/kernel updating. to save some time on environment variable setting and u-boot/kernel updating.
So the default environment variable setting would become more complicated. Just like So the default environment variable setting would become more complicated. Just like
the one I did in include/configs/RPXlite_DW.h. the one I did in include/configs/RPXlite_DW.h.
Two u-boot commands, ku and uu, should be careful to use. They were designed to update Two u-boot commands, ku and uu, should be careful to use. They were designed to update
kernel and u-boot image file respectively. You must tftp your image to default address kernel and u-boot image file respectively. You must tftp your image to default address
'100000' and then use them correctly. Yeah, you can create your own command to do this '100000' and then use them correctly. Yeah, you can create your own command to do this
job. :-) The example u-boot image updating process could be : job. :-) The example u-boot image updating process could be :

3
board/omap2420h4/config.mk
Unescape View File

@ -20,7 +20,6 @@ TEXT_BASE = 0x80e80000
# Used with full SRAM boot. # Used with full SRAM boot.
# This is either with a GP system or a signed boot image. # This is either with a GP system or a signed boot image.
# easiest, and safest way to go if you can. # easiest, and safest way to go if you can.
# Comment out //CONFIG_PARTIAL_SRAM for this one. # Comment out CONFIG_PARTIAL_SRAM for this one.
# #
#TEXT_BASE = 0x40280000 #TEXT_BASE = 0x40280000

5
board/omap2420h4/mem.c
Unescape View File

@ -284,10 +284,10 @@ void gpmc_init(void)
__raw_writel(0x0, GPMC_CONFIG7_0); /* disable current map */ __raw_writel(0x0, GPMC_CONFIG7_0); /* disable current map */
sdelay(1000); sdelay(1000);
__raw_writel(H4_24XX_GPMC_CONFIG1_0|mux|mtype|mwidth, GPMC_CONFIG1_0); __raw_writel(H4_24XX_GPMC_CONFIG1_0|mux|mtype|mwidth, GPMC_CONFIG1_0);
//__raw_writel(H4_24XX_GPMC_CONFIG2_0, GPMC_CONFIG2_0); /* __raw_writel(H4_24XX_GPMC_CONFIG2_0, GPMC_CONFIG2_0); */
__raw_writel(H4_24XX_GPMC_CONFIG3_0, GPMC_CONFIG3_0); __raw_writel(H4_24XX_GPMC_CONFIG3_0, GPMC_CONFIG3_0);
__raw_writel(H4_24XX_GPMC_CONFIG4_0, GPMC_CONFIG4_0); __raw_writel(H4_24XX_GPMC_CONFIG4_0, GPMC_CONFIG4_0);
//__raw_writel(H4_24XX_GPMC_CONFIG5_0, GPMC_CONFIG5_0); /* __raw_writel(H4_24XX_GPMC_CONFIG5_0, GPMC_CONFIG5_0); */
__raw_writel(H4_24XX_GPMC_CONFIG7_0, GPMC_CONFIG7_0);/* enable new mapping */ __raw_writel(H4_24XX_GPMC_CONFIG7_0, GPMC_CONFIG7_0);/* enable new mapping */
sdelay(2000); sdelay(2000);
@ -303,4 +303,3 @@ void gpmc_init(void)
__raw_writel(H4_24XX_GPMC_CONFIG7_1, GPMC_CONFIG7_1); /* enable mapping */ __raw_writel(H4_24XX_GPMC_CONFIG7_1, GPMC_CONFIG7_1); /* enable mapping */
sdelay(2000); sdelay(2000);
} }

140
board/omap2420h4/omap2420h4.c
Unescape View File

@ -333,11 +333,11 @@ void muxSetupI2C1(void)
/* I2C1 Clock pin configuration, PIN = M19 */ /* I2C1 Clock pin configuration, PIN = M19 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_I2C1_SCL; MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_I2C1_SCL;
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* I2C1 Data pin configuration, PIN = L15 */ /* I2C1 Data pin configuration, PIN = L15 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_I2C1_SDA; MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_I2C1_SDA;
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* Pull-up required on data line */ /* Pull-up required on data line */
/* external pull-up already present. */ /* external pull-up already present. */
@ -379,91 +379,91 @@ void muxSetupLCD(void)
/* LCD_D0 pin configuration, PIN = Y7 */ /* LCD_D0 pin configuration, PIN = Y7 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D0; MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D0;
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* LCD_D1 pin configuration, PIN = P10 */ /* LCD_D1 pin configuration, PIN = P10 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D1; MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D1;
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* LCD_D2 pin configuration, PIN = V8 */ /* LCD_D2 pin configuration, PIN = V8 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D2; MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D2;
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* LCD_D3 pin configuration, PIN = Y8 */ /* LCD_D3 pin configuration, PIN = Y8 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D3; MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D3;
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* LCD_D4 pin configuration, PIN = W8 */ /* LCD_D4 pin configuration, PIN = W8 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D4; MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D4;
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* LCD_D5 pin configuration, PIN = R10 */ /* LCD_D5 pin configuration, PIN = R10 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D5; MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D5;
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* LCD_D6 pin configuration, PIN = Y9 */ /* LCD_D6 pin configuration, PIN = Y9 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D6; MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D6;
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* LCD_D7 pin configuration, PIN = V9 */ /* LCD_D7 pin configuration, PIN = V9 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D7; MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D7;
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* LCD_D8 pin configuration, PIN = W9 */ /* LCD_D8 pin configuration, PIN = W9 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D8; MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D8;
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* LCD_D9 pin configuration, PIN = P11 */ /* LCD_D9 pin configuration, PIN = P11 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D9; MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D9;
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* LCD_D10 pin configuration, PIN = V10 */ /* LCD_D10 pin configuration, PIN = V10 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D10; MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D10;
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* LCD_D11 pin configuration, PIN = Y10 */ /* LCD_D11 pin configuration, PIN = Y10 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D11; MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D11;
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* LCD_D12 pin configuration, PIN = W10 */ /* LCD_D12 pin configuration, PIN = W10 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D12; MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D12;
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* LCD_D13 pin configuration, PIN = R11 */ /* LCD_D13 pin configuration, PIN = R11 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D13; MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D13;
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* LCD_D14 pin configuration, PIN = V11 */ /* LCD_D14 pin configuration, PIN = V11 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D14; MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D14;
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* LCD_D15 pin configuration, PIN = W11 */ /* LCD_D15 pin configuration, PIN = W11 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D15; MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D15;
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* LCD_D16 pin configuration, PIN = P12 */ /* LCD_D16 pin configuration, PIN = P12 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D16; MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D16;
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* LCD_D17 pin configuration, PIN = R12 */ /* LCD_D17 pin configuration, PIN = R12 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D17; MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D17;
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* LCD_PCLK pin configuration, PIN = W6 */ /* LCD_PCLK pin configuration, PIN = W6 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_PCLK; MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_PCLK;
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* LCD_VSYNC pin configuration, PIN = V7 */ /* LCD_VSYNC pin configuration, PIN = V7 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_VSYNC; MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_VSYNC;
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* LCD_HSYNC pin configuration, PIN = Y6 */ /* LCD_HSYNC pin configuration, PIN = Y6 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_HSYNC; MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_HSYNC;
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* LCD_ACBIAS pin configuration, PIN = W7 */ /* LCD_ACBIAS pin configuration, PIN = W7 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_ACBIAS; MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_ACBIAS;
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
} }
/**************************************** /****************************************
@ -477,63 +477,63 @@ void muxSetupCamera(void)
/* CAMERA_RSTZ pin configuration, PIN = Y16 */ /* CAMERA_RSTZ pin configuration, PIN = Y16 */
/* CAM_RST is connected through the I2C IO expander.*/ /* CAM_RST is connected through the I2C IO expander.*/
/* MuxConfigReg = (volatile unsigned char *), CONTROL_PADCONF_SYS_NRESWARM*/ /* MuxConfigReg = (volatile unsigned char *), CONTROL_PADCONF_SYS_NRESWARM*/
/* *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled */ /* *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* CAMERA_XCLK pin configuration, PIN = U3 */ /* CAMERA_XCLK pin configuration, PIN = U3 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_XCLK; MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_XCLK;
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* CAMERA_LCLK pin configuration, PIN = V5 */ /* CAMERA_LCLK pin configuration, PIN = V5 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_LCLK; MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_LCLK;
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* CAMERA_VSYNC pin configuration, PIN = U2 */ /* CAMERA_VSYNC pin configuration, PIN = U2 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_VS, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_VS,
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* CAMERA_HSYNC pin configuration, PIN = T3 */ /* CAMERA_HSYNC pin configuration, PIN = T3 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_HS, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_HS,
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* CAMERA_DAT0 pin configuration, PIN = T4 */ /* CAMERA_DAT0 pin configuration, PIN = T4 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D0, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D0,
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* CAMERA_DAT1 pin configuration, PIN = V2 */ /* CAMERA_DAT1 pin configuration, PIN = V2 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D1, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D1,
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* CAMERA_DAT2 pin configuration, PIN = V3 */ /* CAMERA_DAT2 pin configuration, PIN = V3 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D2, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D2,
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* CAMERA_DAT3 pin configuration, PIN = U4 */ /* CAMERA_DAT3 pin configuration, PIN = U4 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D3, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D3,
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* CAMERA_DAT4 pin configuration, PIN = W2 */ /* CAMERA_DAT4 pin configuration, PIN = W2 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D4, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D4,
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* CAMERA_DAT5 pin configuration, PIN = V4 */ /* CAMERA_DAT5 pin configuration, PIN = V4 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D5, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D5,
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* CAMERA_DAT6 pin configuration, PIN = W3 */ /* CAMERA_DAT6 pin configuration, PIN = W3 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D6, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D6,
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* CAMERA_DAT7 pin configuration, PIN = Y2 */ /* CAMERA_DAT7 pin configuration, PIN = Y2 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D7, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D7,
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* CAMERA_DAT8 pin configuration, PIN = Y4 */ /* CAMERA_DAT8 pin configuration, PIN = Y4 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D8, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D8,
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* CAMERA_DAT9 pin configuration, PIN = V6 */ /* CAMERA_DAT9 pin configuration, PIN = V6 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D9, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D9,
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
} }
/**************************************** /****************************************
@ -546,70 +546,70 @@ void muxSetupMMCSD(void)
/* SDMMC_CLKI pin configuration, PIN = H15 */ /* SDMMC_CLKI pin configuration, PIN = H15 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CLKI, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CLKI,
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* SDMMC_CLKO pin configuration, PIN = G19 */ /* SDMMC_CLKO pin configuration, PIN = G19 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CLKO, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CLKO,
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* SDMMC_CMD pin configuration, PIN = H18 */ /* SDMMC_CMD pin configuration, PIN = H18 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CMD, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CMD,
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
// External pull-ups are present. /* External pull-ups are present. */
// *MuxConfigReg |= 0x18 ; // PullUDEnable=Enabled, PullTypeSel=PU /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
/* SDMMC_DAT0 pin configuration, PIN = F20 */ /* SDMMC_DAT0 pin configuration, PIN = F20 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT0, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT0,
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
// External pull-ups are present. /* External pull-ups are present. */
// *MuxConfigReg |= 0x18 ; // PullUDEnable=Enabled, PullTypeSel=PU /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
/* SDMMC_DAT1 pin configuration, PIN = H14 */ /* SDMMC_DAT1 pin configuration, PIN = H14 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT1, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT1,
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
// External pull-ups are present. /* External pull-ups are present. */
// *MuxConfigReg |= 0x18 ; // PullUDEnable=Enabled, PullTypeSel=PU /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
/* SDMMC_DAT2 pin configuration, PIN = E19 */ /* SDMMC_DAT2 pin configuration, PIN = E19 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT2, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT2,
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
// External pull-ups are present. /* External pull-ups are present. */
// *MuxConfigReg |= 0x18 ; // PullUDEnable=Enabled, PullTypeSel=PU /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
/* SDMMC_DAT3 pin configuration, PIN = D19 */ /* SDMMC_DAT3 pin configuration, PIN = D19 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT3, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT3,
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
// External pull-ups are present. /* External pull-ups are present. */
// *MuxConfigReg |= 0x18 ; // PullUDEnable=Enabled, PullTypeSel=PU /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
/* SDMMC_DDIR0 pin configuration, PIN = F19 */ /* SDMMC_DDIR0 pin configuration, PIN = F19 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR0, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR0,
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* SDMMC_DDIR1 pin configuration, PIN = E20 */ /* SDMMC_DDIR1 pin configuration, PIN = E20 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR1, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR1,
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* SDMMC_DDIR2 pin configuration, PIN = F18 */ /* SDMMC_DDIR2 pin configuration, PIN = F18 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR2, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR2,
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* SDMMC_DDIR3 pin configuration, PIN = E18 */ /* SDMMC_DDIR3 pin configuration, PIN = E18 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR3, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR3,
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* SDMMC_CDIR pin configuration, PIN = G18 */ /* SDMMC_CDIR pin configuration, PIN = G18 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CMD_DIR, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CMD_DIR,
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* MMC_CD pin configuration, PIN = B3 ---2420IP ONLY---*/ /* MMC_CD pin configuration, PIN = B3 ---2420IP ONLY---*/
/* MMC_CD for 2422IP=K1 */ /* MMC_CD for 2422IP=K1 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SDRC_A14, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SDRC_A14,
*MuxConfigReg = 0x03 ; // Mode = 3, PUPD=Disabled *MuxConfigReg = 0x03 ; /* Mode = 3, PUPD=Disabled */
/* MMC_WP pin configuration, PIN = B4 */ /* MMC_WP pin configuration, PIN = B4 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SDRC_A13, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SDRC_A13,
*MuxConfigReg = 0x03 ; // Mode = 3, PUPD=Disabled *MuxConfigReg = 0x03 ; /* Mode = 3, PUPD=Disabled */
} }
/****************************************** /******************************************
@ -622,23 +622,23 @@ void muxSetupTouchScreen(void)
/* SPI1_CLK pin configuration, PIN = U18 */ /* SPI1_CLK pin configuration, PIN = U18 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_CLK, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_CLK,
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* SPI1_MOSI pin configuration, PIN = V20 */ /* SPI1_MOSI pin configuration, PIN = V20 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_SIMO, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_SIMO,
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* SPI1_MISO pin configuration, PIN = T18 */ /* SPI1_MISO pin configuration, PIN = T18 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_SOMI, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_SOMI,
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* SPI1_nCS0 pin configuration, PIN = U19 */ /* SPI1_nCS0 pin configuration, PIN = U19 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_NCS0, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_NCS0,
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
/* PEN_IRQ pin configuration, PIN = P20 */ /* PEN_IRQ pin configuration, PIN = P20 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MCBSP1_FSR, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MCBSP1_FSR,
*MuxConfigReg = 0x03 ; // Mode = 3, PUPD=Disabled *MuxConfigReg = 0x03 ; /* Mode = 3, PUPD=Disabled */
} }
/**************************************** /****************************************
@ -651,7 +651,7 @@ void muxSetupHDQ(void)
/* HDQ_SIO pin configuration, PIN = N18 */ /* HDQ_SIO pin configuration, PIN = N18 */
MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_HDQ_SIO, MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_HDQ_SIO,
*MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
} }
/*************************************************************** /***************************************************************
@ -830,5 +830,3 @@ void update_mux(u32 btype,u32 mtype)
} }
} }
} }

194
board/omap2420h4/platform.S
Unescape View File

@ -15,7 +15,7 @@
* *
* This program is distributed in the hope that it will be useful, * This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of * but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details. * GNU General Public License for more details.
* *
* You should have received a copy of the GNU General Public License * You should have received a copy of the GNU General Public License
@ -41,109 +41,109 @@ _TEXT_BASE:
*************************************************************************/ *************************************************************************/
.global cpy_clk_code .global cpy_clk_code
cpy_clk_code: cpy_clk_code:
/* Copy DPLL code into SRAM */ /* Copy DPLL code into SRAM */
adr r0, go_to_speed /* get addr of clock setting code */ adr r0, go_to_speed /* get addr of clock setting code */
mov r2, #384 /* r2 size to copy (div by 32 bytes) */ mov r2, #384 /* r2 size to copy (div by 32 bytes) */
mov r1, r1 /* r1 <- dest address (passed in) */ mov r1, r1 /* r1 <- dest address (passed in) */
add r2, r2, r0 /* r2 <- source end address */ add r2, r2, r0 /* r2 <- source end address */
next2: next2:
ldmia r0!, {r3-r10} /* copy from source address [r0] */ ldmia r0!, {r3-r10} /* copy from source address [r0] */
stmia r1!, {r3-r10} /* copy to target address [r1] */ stmia r1!, {r3-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */ cmp r0, r2 /* until source end address [r2] */
bne next2 bne next2
mov pc, lr /* back to caller */ mov pc, lr /* back to caller */
/* **************************************************************************** /* ****************************************************************************
* go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed
* -executed from SRAM. * -executed from SRAM.
* R0 = PRCM_CLKCFG_CTRL - addr of valid reg * R0 = PRCM_CLKCFG_CTRL - addr of valid reg
* R1 = CM_CLKEN_PLL - addr dpll ctlr reg * R1 = CM_CLKEN_PLL - addr dpll ctlr reg
* R2 = dpll value * R2 = dpll value
* R3 = CM_IDLEST_CKGEN - addr dpll lock wait * R3 = CM_IDLEST_CKGEN - addr dpll lock wait
******************************************************************************/ ******************************************************************************/
.global go_to_speed .global go_to_speed
go_to_speed: go_to_speed:
sub sp, sp, #0x4 /* get some stack space */ sub sp, sp, #0x4 /* get some stack space */
str r4, [sp] /* save r4's value */ str r4, [sp] /* save r4's value */
/* move into fast relock bypass */ /* move into fast relock bypass */
ldr r8, pll_ctl_add ldr r8, pll_ctl_add
mov r4, #0x2 mov r4, #0x2
str r4, [r8] str r4, [r8]
ldr r4, pll_stat ldr r4, pll_stat
block: block:
ldr r8, [r4] /* wait for bypass to take effect */ ldr r8, [r4] /* wait for bypass to take effect */
and r8, r8, #0x3 and r8, r8, #0x3
cmp r8, #0x1 cmp r8, #0x1
bne block bne block
/* set new dpll dividers _after_ in bypass */ /* set new dpll dividers _after_ in bypass */
ldr r4, pll_div_add ldr r4, pll_div_add
ldr r8, pll_div_val ldr r8, pll_div_val
str r8, [r4] str r8, [r4]
/* now prepare GPMC (flash) for new dpll speed */ /* now prepare GPMC (flash) for new dpll speed */
/* flash needs to be stable when we jump back to it */ /* flash needs to be stable when we jump back to it */
ldr r4, cfg3_0_addr ldr r4, cfg3_0_addr
ldr r8, cfg3_0_val ldr r8, cfg3_0_val
str r8, [r4] str r8, [r4]
ldr r4, cfg4_0_addr ldr r4, cfg4_0_addr
ldr r8, cfg4_0_val ldr r8, cfg4_0_val
str r8, [r4] str r8, [r4]
ldr r4, cfg1_0_addr ldr r4, cfg1_0_addr
ldr r8, [r4] ldr r8, [r4]
orr r8, r8, #0x3 /* up gpmc divider */ orr r8, r8, #0x3 /* up gpmc divider */
str r8, [r4] str r8, [r4]
/* setup to 2x loop though code. The first loop pre-loads the /* setup to 2x loop though code. The first loop pre-loads the
* icache, the 2nd commits the prcm config, and locks the dpll * icache, the 2nd commits the prcm config, and locks the dpll
*/ */
mov r4, #0x1000 /* spin spin spin */ mov r4, #0x1000 /* spin spin spin */
mov r8, #0x4 /* first pass condition & set registers */ mov r8, #0x4 /* first pass condition & set registers */
cmp r8, #0x4 cmp r8, #0x4
2: 2:
ldrne r8, [r3] /* DPLL lock check */ ldrne r8, [r3] /* DPLL lock check */
and r8, r8, #0x7 and r8, r8, #0x7
cmp r8, #0x2 cmp r8, #0x2
beq 4f beq 4f
3: 3:
subeq r8, r8, #0x1 subeq r8, r8, #0x1
streq r8, [r0] /* commit dividers (2nd time) */ streq r8, [r0] /* commit dividers (2nd time) */
nop nop
lloop1: lloop1:
sub r4, r4, #0x1 /* Loop currently necessary else bad jumps */ sub r4, r4, #0x1 /* Loop currently necessary else bad jumps */
nop nop
cmp r4, #0x0 cmp r4, #0x0
bne lloop1 bne lloop1
mov r4, #0x40000 mov r4, #0x40000
cmp r8, #0x1 cmp r8, #0x1
nop nop
streq r2, [r1] /* lock dpll (2nd time) */ streq r2, [r1] /* lock dpll (2nd time) */
nop nop
lloop2: lloop2:
sub r4, r4, #0x1 /* loop currently necessary else bad jumps */ sub r4, r4, #0x1 /* loop currently necessary else bad jumps */
nop nop
cmp r4, #0x0 cmp r4, #0x0
bne lloop2 bne lloop2
mov r4, #0x40000 mov r4, #0x40000
cmp r8, #0x1 cmp r8, #0x1
nop nop
ldreq r8, [r3] /* get lock condition for dpll */ ldreq r8, [r3] /* get lock condition for dpll */
cmp r8, #0x4 /* first time though? */ cmp r8, #0x4 /* first time though? */
bne 2b bne 2b
moveq r8, #0x2 /* set to dpll check condition. */ moveq r8, #0x2 /* set to dpll check condition. */
beq 3b /* if condition not true branch */ beq 3b /* if condition not true branch */
4: 4:
ldr r4, [sp] ldr r4, [sp]
add sp, sp, #0x4 /* return stack space */ add sp, sp, #0x4 /* return stack space */
mov pc, lr /* back to caller, locked */ mov pc, lr /* back to caller, locked */
_go_to_speed: .word go_to_speed _go_to_speed: .word go_to_speed
/* these constants need to be close for PIC code */ /* these constants need to be close for PIC code */
cfg3_0_addr: cfg3_0_addr:
.word GPMC_CONFIG3_0 .word GPMC_CONFIG3_0
cfg3_0_val: cfg3_0_val:
.word H4_24XX_GPMC_CONFIG3_0 .word H4_24XX_GPMC_CONFIG3_0
cfg4_0_addr: cfg4_0_addr:
.word GPMC_CONFIG4_0 .word GPMC_CONFIG4_0
@ -156,10 +156,10 @@ pll_ctl_add:
pll_stat: pll_stat:
.word CM_IDLEST_CKGEN .word CM_IDLEST_CKGEN
pll_div_add: pll_div_add:
.word CM_CLKSEL1_PLL .word CM_CLKSEL1_PLL
pll_div_val: pll_div_val:
.word DPLL_VAL /* DPLL setting (300MHz default) */ .word DPLL_VAL /* DPLL setting (300MHz default) */
#endif #endif
.globl platformsetup .globl platformsetup
platformsetup: platformsetup:
@ -175,23 +175,23 @@ platformsetup:
ldr r0, REG_SDRC_SHARING ldr r0, REG_SDRC_SHARING
ldr r1, VAL_SDRC_SHARING ldr r1, VAL_SDRC_SHARING
str r1, [r0] str r1, [r0]
ldr r0, REG_SDRC_RFR_CTRL_0 ldr r0, REG_SDRC_RFR_CTRL_0
ldr r1, VAL_SDRC_RFR_CTRL_0 ldr r1, VAL_SDRC_RFR_CTRL_0
str r1, [r0] str r1, [r0]
/* little delay after init */ /* little delay after init */
mov r2, #0x1800 mov r2, #0x1800
1: 1:
subs r2, r2, #0x1 subs r2, r2, #0x1
bne 1b bne 1b
#endif #endif
#ifdef CONFIG_PARTIAL_SRAM #ifdef CONFIG_PARTIAL_SRAM
ldr sp, SRAM_STACK ldr sp, SRAM_STACK
str ip, [sp] /* stash old link register */ str ip, [sp] /* stash old link register */
mov ip, lr /* save link reg across call */ mov ip, lr /* save link reg across call */
mov r0, r3 /* pass skip info to s_init */ mov r0, r3 /* pass skip info to s_init */
bl s_init /* go setup pll,mux,memory */ bl s_init /* go setup pll,mux,memory */
ldr ip, [sp] /* restore save ip */ ldr ip, [sp] /* restore save ip */
mov lr, ip /* restore link reg */ mov lr, ip /* restore link reg */
#endif #endif
/* map interrupt controller */ /* map interrupt controller */
@ -219,7 +219,7 @@ REG_SDRC_MCFG_0:
REG_SDRC_MR_0: REG_SDRC_MR_0:
.word SDRC_MR_0 .word SDRC_MR_0
REG_SDRC_RFR_CTRL_0: REG_SDRC_RFR_CTRL_0:
.word SDRC_RFR_CTRL .word SDRC_RFR_CTRL
VAL_SDRC_SHARING: VAL_SDRC_SHARING:
.word VAL_H4_SDRC_SHARING .word VAL_H4_SDRC_SHARING
VAL_SDRC_MCFG_0: VAL_SDRC_MCFG_0:
@ -227,11 +227,5 @@ VAL_SDRC_MCFG_0:
VAL_SDRC_MR_0: VAL_SDRC_MR_0:
.word VAL_H4_SDRC_MR_0 .word VAL_H4_SDRC_MR_0
VAL_SDRC_RFR_CTRL_0: VAL_SDRC_RFR_CTRL_0:
.word VAL_H4_SDRC_RFR_CTRL_0 .word VAL_H4_SDRC_RFR_CTRL_0
#endif #endif

8
board/omap2420h4/u-boot.lds
Unescape View File

@ -1,6 +1,6 @@
/* /*
* January 2004 - Changed to support H4 device * January 2004 - Changed to support H4 device
* Copyright (c) 2004 Texas Instruments * Copyright (c) 2004 Texas Instruments
* *
* (C) Copyright 2002 * (C) Copyright 2002
* Gary Jennejohn, DENX Software Engineering, <gj@denx.de> * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
@ -15,7 +15,7 @@
* *
* This program is distributed in the hope that it will be useful, * This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of * but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details. * GNU General Public License for more details.
* *
* You should have received a copy of the GNU General Public License * You should have received a copy of the GNU General Public License
@ -32,7 +32,7 @@ SECTIONS
. = 0x00000000; . = 0x00000000;
. = ALIGN(4); . = ALIGN(4);
.text : .text :
{ {
cpu/arm1136/start.o (.text) cpu/arm1136/start.o (.text)
*(.text) *(.text)

4
cpu/arm1136/cpu.c
Unescape View File

@ -124,8 +124,8 @@ int cleanup_before_linux (void)
/* flush I/D-cache */ /* flush I/D-cache */
i = 0; i = 0;
asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i)); // invalidate both caches and flush btb asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i)); /* invalidate both caches and flush btb */
asm ("mcr p15, 0, %0, c7, c10, 4": :"r" (i)); // mem barrier to sync things asm ("mcr p15, 0, %0, c7, c10, 4": :"r" (i)); /* mem barrier to sync things */
return(0); return(0);
} }

9
cpu/arm1136/interrupts.c
Unescape View File

@ -1,14 +1,11 @@
/* /*
* (C) Copyright 2004 * (C) Copyright 2004
* Texas Instruments * Texas Instruments
* Richard Woodruff <r-woodruff2@ti.com> * Richard Woodruff <r-woodruff2@ti.com>
* *
* (C) Copyright 2002 * (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com> * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de> * Marius Groeger <mgroeger@sysgo.de>
*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Alex Zuepke <azu@sysgo.de> * Alex Zuepke <azu@sysgo.de>
* *
* (C) Copyright 2002 * (C) Copyright 2002

154
cpu/arm1136/start.S
Unescape View File

@ -1,7 +1,7 @@
/* /*
* armboot - Startup Code for OMP2420/ARM1136 CPU-core * armboot - Startup Code for OMP2420/ARM1136 CPU-core
* *
* Copyright (c) 2004 Texas Instruments <r-woodruff2@ti.com> * Copyright (c) 2004 Texas Instruments <r-woodruff2@ti.com>
* *
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de> * Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de> * Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
@ -19,7 +19,7 @@
* *
* This program is distributed in the hope that it will be useful, * This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of * but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details. * GNU General Public License for more details.
* *
* You should have received a copy of the GNU General Public License * You should have received a copy of the GNU General Public License
@ -33,7 +33,7 @@
#include <asm/arch/omap2420.h> #include <asm/arch/omap2420.h>
.globl _start .globl _start
_start: b reset _start: b reset
ldr pc, _undefined_instruction ldr pc, _undefined_instruction
ldr pc, _software_interrupt ldr pc, _software_interrupt
ldr pc, _prefetch_abort ldr pc, _prefetch_abort
@ -42,14 +42,14 @@ _start: b reset
ldr pc, _irq ldr pc, _irq
ldr pc, _fiq ldr pc, _fiq
_undefined_instruction: .word undefined_instruction _undefined_instruction: .word undefined_instruction
_software_interrupt: .word software_interrupt _software_interrupt: .word software_interrupt
_prefetch_abort: .word prefetch_abort _prefetch_abort: .word prefetch_abort
_data_abort: .word data_abort _data_abort: .word data_abort
_not_used: .word not_used _not_used: .word not_used
_irq: .word irq _irq: .word irq
_fiq: .word fiq _fiq: .word fiq
_pad: .word 0x12345678 /* now 16*4=64 */ _pad: .word 0x12345678 /* now 16*4=64 */
.global _end_vect .global _end_vect
_end_vect: _end_vect:
@ -111,22 +111,22 @@ reset:
msr cpsr,r0 msr cpsr,r0
#ifdef CONFIG_OMAP2420H4 #ifdef CONFIG_OMAP2420H4
/* Copy vectors to mask ROM indirect addr */ /* Copy vectors to mask ROM indirect addr */
adr r0, _start /* r0 <- current position of code */ adr r0, _start /* r0 <- current position of code */
mov r2, #64 /* r2 <- size to copy */ mov r2, #64 /* r2 <- size to copy */
add r2, r0, r2 /* r2 <- source end address */ add r2, r0, r2 /* r2 <- source end address */
mov r1, #SRAM_OFFSET0 /* build vect addr */ mov r1, #SRAM_OFFSET0 /* build vect addr */
mov r3, #SRAM_OFFSET1 mov r3, #SRAM_OFFSET1
add r1, r1, r3 add r1, r1, r3
mov r3, #SRAM_OFFSET2 mov r3, #SRAM_OFFSET2
add r1, r1, r3 add r1, r1, r3
next: next:
ldmia r0!, {r3-r10} /* copy from source address [r0] */ ldmia r0!, {r3-r10} /* copy from source address [r0] */
stmia r1!, {r3-r10} /* copy to target address [r1] */ stmia r1!, {r3-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */ cmp r0, r2 /* until source end address [r2] */
bne next /* loop until equal */ bne next /* loop until equal */
#ifdef CONFIG_PARTIAL_SRAM #ifdef CONFIG_PARTIAL_SRAM
bl cpy_clk_code /* put dpll adjust code behind vectors */ bl cpy_clk_code /* put dpll adjust code behind vectors */
#endif #endif
#endif #endif
/* the mask ROM code should have PLL and others stable */ /* the mask ROM code should have PLL and others stable */
@ -135,13 +135,13 @@ next:
relocate: /* relocate U-Boot to RAM */ relocate: /* relocate U-Boot to RAM */
adr r0, _start /* r0 <- current position of code */ adr r0, _start /* r0 <- current position of code */
ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ ldr r1, _TEXT_BASE /* test if we run from flash or RAM */
cmp r0, r1 /* don't reloc during debug */ cmp r0, r1 /* don't reloc during debug */
beq stack_setup beq stack_setup
ldr r2, _armboot_start ldr r2, _armboot_start
ldr r3, _bss_start ldr r3, _bss_start
sub r2, r3, r2 /* r2 <- size of armboot */ sub r2, r3, r2 /* r2 <- size of armboot */
add r2, r0, r2 /* r2 <- source end address */ add r2, r0, r2 /* r2 <- source end address */
copy_loop: copy_loop:
ldmia r0!, {r3-r10} /* copy from source address [r0] */ ldmia r0!, {r3-r10} /* copy from source address [r0] */
@ -152,26 +152,26 @@ copy_loop:
/* Set up the stack */ /* Set up the stack */
stack_setup: stack_setup:
ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */
sub r0, r0, #CFG_MALLOC_LEN /* malloc area */ sub r0, r0, #CFG_MALLOC_LEN /* malloc area */
sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */ sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */
#ifdef CONFIG_USE_IRQ #ifdef CONFIG_USE_IRQ
sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
#endif #endif
sub sp, r0, #12 /* leave 3 words for abort-stack */ sub sp, r0, #12 /* leave 3 words for abort-stack */
clear_bss: clear_bss:
ldr r0, _bss_start /* find start of bss segment */ ldr r0, _bss_start /* find start of bss segment */
ldr r1, _bss_end /* stop here */ ldr r1, _bss_end /* stop here */
mov r2, #0x00000000 /* clear */ mov r2, #0x00000000 /* clear */
clbss_l:str r2, [r0] /* clear loop... */ clbss_l:str r2, [r0] /* clear loop... */
add r0, r0, #4 add r0, r0, #4
cmp r0, r1 cmp r0, r1
bne clbss_l bne clbss_l
ldr pc, _start_armboot ldr pc, _start_armboot
_start_armboot: .word start_armboot _start_armboot: .word start_armboot
/* /*
@ -205,18 +205,18 @@ cpu_init_crit:
mcr p15, 0, r0, c1, c0, 0 mcr p15, 0, r0, c1, c0, 0
/* /*
* Jump to board specific initialization... The Mask ROM will have already initialized * Jump to board specific initialization... The Mask ROM will have already initialized
* basic memory. Go here to bump up clock rate and handle wake up conditions. * basic memory. Go here to bump up clock rate and handle wake up conditions.
*/ */
adr r0, _start /* r0 <- current position of code */ adr r0, _start /* r0 <- current position of code */
ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ ldr r1, _TEXT_BASE /* test if we run from flash or RAM */
cmp r0, r1 /* pass on info about skipping some init portions */ cmp r0, r1 /* pass on info about skipping some init portions */
moveq r0,#0x1 /* flag to skip prcm and sdrc setup */ moveq r0,#0x1 /* flag to skip prcm and sdrc setup */
movne r0,#0x0 movne r0,#0x0
mov ip, lr /* persevere link reg across call */ mov ip, lr /* persevere link reg across call */
bl platformsetup /* go setup pll,mux,memory */ bl platformsetup /* go setup pll,mux,memory */
mov lr, ip /* restore link */ mov lr, ip /* restore link */
mov pc, lr /* back to my caller */ mov pc, lr /* back to my caller */
/* /*
************************************************************************* *************************************************************************
* *
@ -258,30 +258,30 @@ cpu_init_crit:
*/ */
.macro bad_save_user_regs .macro bad_save_user_regs
sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current user stack sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current user stack
stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12 stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12
ldr r2, _armboot_start ldr r2, _armboot_start
sub r2, r2, #(CFG_MALLOC_LEN) sub r2, r2, #(CFG_MALLOC_LEN)
sub r2, r2, #(CFG_GBL_DATA_SIZE+8) @ set base 2 words into abort stack sub r2, r2, #(CFG_GBL_DATA_SIZE+8) @ set base 2 words into abort stack
ldmia r2, {r2 - r3} @ get values for "aborted" pc and cpsr (into parm regs) ldmia r2, {r2 - r3} @ get values for "aborted" pc and cpsr (into parm regs)
add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack
add r5, sp, #S_SP add r5, sp, #S_SP
mov r1, lr mov r1, lr
stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr
mov r0, sp @ save current stack into r0 (param register) mov r0, sp @ save current stack into r0 (param register)
.endm .endm
.macro irq_save_user_regs .macro irq_save_user_regs
sub sp, sp, #S_FRAME_SIZE sub sp, sp, #S_FRAME_SIZE
stmia sp, {r0 - r12} @ Calling r0-r12 stmia sp, {r0 - r12} @ Calling r0-r12
add r8, sp, #S_PC @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good. add r8, sp, #S_PC @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good.
stmdb r8, {sp, lr}^ @ Calling SP, LR stmdb r8, {sp, lr}^ @ Calling SP, LR
str lr, [r8, #0] @ Save calling PC str lr, [r8, #0] @ Save calling PC
mrs r6, spsr mrs r6, spsr
str r6, [r8, #4] @ Save CPSR str r6, [r8, #4] @ Save CPSR
str r0, [r8, #8] @ Save OLD_R0 str r0, [r8, #8] @ Save OLD_R0
mov r0, sp mov r0, sp
.endm .endm
@ -295,31 +295,31 @@ cpu_init_crit:
.macro get_bad_stack .macro get_bad_stack
ldr r13, _armboot_start @ setup our mode stack (enter in banked mode) ldr r13, _armboot_start @ setup our mode stack (enter in banked mode)
sub r13, r13, #(CFG_MALLOC_LEN) @ move past malloc pool sub r13, r13, #(CFG_MALLOC_LEN) @ move past malloc pool
sub r13, r13, #(CFG_GBL_DATA_SIZE+8) @ move to reserved a couple spots for abort stack sub r13, r13, #(CFG_GBL_DATA_SIZE+8) @ move to reserved a couple spots for abort stack
str lr, [r13] @ save caller lr in position 0 of saved stack str lr, [r13] @ save caller lr in position 0 of saved stack
mrs lr, spsr @ get the spsr mrs lr, spsr @ get the spsr
str lr, [r13, #4] @ save spsr in position 1 of saved stack str lr, [r13, #4] @ save spsr in position 1 of saved stack
mov r13, #MODE_SVC @ prepare SVC-Mode mov r13, #MODE_SVC @ prepare SVC-Mode
@ msr spsr_c, r13 @ msr spsr_c, r13
msr spsr, r13 @ switch modes, make sure moves will execute msr spsr, r13 @ switch modes, make sure moves will execute
mov lr, pc @ capture return pc mov lr, pc @ capture return pc
movs pc, lr @ jump to next instruction & switch modes. movs pc, lr @ jump to next instruction & switch modes.
.endm .endm
.macro get_bad_stack_swi .macro get_bad_stack_swi
sub r13, r13, #4 @ space on current stack for scratch reg. sub r13, r13, #4 @ space on current stack for scratch reg.
str r0, [r13] @ save R0's value. str r0, [r13] @ save R0's value.
ldr r0, _armboot_start @ get data regions start ldr r0, _armboot_start @ get data regions start
sub r0, r0, #(CFG_MALLOC_LEN) @ move past malloc pool sub r0, r0, #(CFG_MALLOC_LEN) @ move past malloc pool
sub r0, r0, #(CFG_GBL_DATA_SIZE+8) @ move past gbl and a couple spots for abort stack sub r0, r0, #(CFG_GBL_DATA_SIZE+8) @ move past gbl and a couple spots for abort stack
str lr, [r0] @ save caller lr in position 0 of saved stack str lr, [r0] @ save caller lr in position 0 of saved stack
mrs r0, spsr @ get the spsr mrs r0, spsr @ get the spsr
str lr, [r0, #4] @ save spsr in position 1 of saved stack str lr, [r0, #4] @ save spsr in position 1 of saved stack
ldr r0, [r13] @ restore r0 ldr r0, [r13] @ restore r0
add r13, r13, #4 @ pop stack entry add r13, r13, #4 @ pop stack entry
.endm .endm
.macro get_irq_stack @ setup IRQ stack .macro get_irq_stack @ setup IRQ stack
@ -333,35 +333,35 @@ cpu_init_crit:
/* /*
* exception handlers * exception handlers
*/ */
.align 5 .align 5
undefined_instruction: undefined_instruction:
get_bad_stack get_bad_stack
bad_save_user_regs bad_save_user_regs
bl do_undefined_instruction bl do_undefined_instruction
.align 5 .align 5
software_interrupt: software_interrupt:
get_bad_stack_swi get_bad_stack_swi
bad_save_user_regs bad_save_user_regs
bl do_software_interrupt bl do_software_interrupt
.align 5 .align 5
prefetch_abort: prefetch_abort:
get_bad_stack get_bad_stack
bad_save_user_regs bad_save_user_regs
bl do_prefetch_abort bl do_prefetch_abort
.align 5 .align 5
data_abort: data_abort:
get_bad_stack get_bad_stack
bad_save_user_regs bad_save_user_regs
bl do_data_abort bl do_data_abort
.align 5 .align 5
not_used: not_used:
get_bad_stack get_bad_stack
bad_save_user_regs bad_save_user_regs
bl do_not_used bl do_not_used
#ifdef CONFIG_USE_IRQ #ifdef CONFIG_USE_IRQ
@ -369,7 +369,7 @@ not_used:
irq: irq:
get_irq_stack get_irq_stack
irq_save_user_regs irq_save_user_regs
bl do_irq bl do_irq
irq_restore_user_regs irq_restore_user_regs
.align 5 .align 5
@ -377,7 +377,7 @@ fiq:
get_fiq_stack get_fiq_stack
/* someone ought to write a more effiction fiq_save_user_regs */ /* someone ought to write a more effiction fiq_save_user_regs */
irq_save_user_regs irq_save_user_regs
bl do_fiq bl do_fiq
irq_restore_user_regs irq_restore_user_regs
#else #else
@ -386,13 +386,13 @@ fiq:
irq: irq:
get_bad_stack get_bad_stack
bad_save_user_regs bad_save_user_regs
bl do_irq bl do_irq
.align 5 .align 5
fiq: fiq:
get_bad_stack get_bad_stack
bad_save_user_regs bad_save_user_regs
bl do_fiq bl do_fiq
#endif #endif
.align 5 .align 5
@ -404,9 +404,9 @@ arm1136_cache_flush:
.align 5 .align 5
.globl reset_cpu .globl reset_cpu
reset_cpu: reset_cpu:
ldr r1, rstctl /* get addr for global reset reg */ ldr r1, rstctl /* get addr for global reset reg */
mov r3, #0x3 /* full reset pll+mpu */ mov r3, #0x3 /* full reset pll+mpu */
str r3, [r1] /* force reset */ str r3, [r1] /* force reset */
mov r0, r0 mov r0, r0
_loop_forever: _loop_forever:
b _loop_forever b _loop_forever

2
drivers/8390.h
Unescape View File

@ -92,8 +92,6 @@ are GPL, so this is, of course, GPL.
#define ENDCFG_AUTO_INIT 0x10 /* Auto-init to remove packets from ring */ #define ENDCFG_AUTO_INIT 0x10 /* Auto-init to remove packets from ring */
#define ENDCFG_FIFO 0x40 /* 8 bytes */ #define ENDCFG_FIFO 0x40 /* 8 bytes */
/* Page 1 register offsets. */ /* Page 1 register offsets. */
#define EN1_PHYS EI_SHIFT(0x01) /* This board's physical enet addr RD WR */ #define EN1_PHYS EI_SHIFT(0x01) /* This board's physical enet addr RD WR */
#define EN1_PHYS_SHIFT(i) EI_SHIFT(i+1) /* Get and set mac address */ #define EN1_PHYS_SHIFT(i) EI_SHIFT(i+1) /* Get and set mac address */

22
drivers/omap24xx_i2c.c
Unescape View File

@ -44,8 +44,8 @@ void i2c_init (int speed, int slaveadd)
/* 12Mhz I2C module clock */ /* 12Mhz I2C module clock */
outw (0, I2C_PSC); outw (0, I2C_PSC);
speed = speed/1000; /* 100 or 400 */ speed = speed/1000; /* 100 or 400 */
scl = ((12000/(speed*2)) - 7); /* use 7 when PSC = 0 */ scl = ((12000/(speed*2)) - 7); /* use 7 when PSC = 0 */
outw (scl, I2C_SCLL); outw (scl, I2C_SCLL);
outw (scl, I2C_SCLH); outw (scl, I2C_SCLH);
/* own address */ /* own address */
@ -174,10 +174,10 @@ static int i2c_write_byte (u8 devaddr, u8 regoffset, u8 value)
void flush_fifo(void) void flush_fifo(void)
{ u16 stat; { u16 stat;
/* note: if you try and read data when its not there or ready /* note: if you try and read data when its not there or ready
* you get a bus error * you get a bus error
*/ */
while(1){ while(1){
stat = inw(I2C_STAT); stat = inw(I2C_STAT);
if(stat == I2C_STAT_RRDY){ if(stat == I2C_STAT_RRDY){
@ -210,11 +210,11 @@ int i2c_probe (uchar chip)
udelay (50000); udelay (50000);
if (!(inw (I2C_STAT) & I2C_STAT_NACK)) { if (!(inw (I2C_STAT) & I2C_STAT_NACK)) {
res = 0; /* success case */ res = 0; /* success case */
flush_fifo(); flush_fifo();
outw(0xFFFF, I2C_STAT); outw(0xFFFF, I2C_STAT);
} else { } else {
outw(0xFFFF, I2C_STAT); /* failue, clear sources*/ outw(0xFFFF, I2C_STAT); /* failue, clear sources*/
outw (inw (I2C_CON) | I2C_CON_STP, I2C_CON); /* finish up xfer */ outw (inw (I2C_CON) | I2C_CON_STP, I2C_CON); /* finish up xfer */
udelay(20000); udelay(20000);
wait_for_bb (); wait_for_bb ();
@ -280,7 +280,7 @@ static void wait_for_bb (void)
int timeout = 10; int timeout = 10;
u16 stat; u16 stat;
outw(0xFFFF, I2C_STAT); /* clear current interruts...*/ outw(0xFFFF, I2C_STAT); /* clear current interruts...*/
while ((stat = inw (I2C_STAT) & I2C_STAT_BB) && timeout--) { while ((stat = inw (I2C_STAT) & I2C_STAT_BB) && timeout--) {
outw (stat, I2C_STAT); outw (stat, I2C_STAT);
udelay (50000); udelay (50000);
@ -290,7 +290,7 @@ static void wait_for_bb (void)
printf ("timed out in wait_for_bb: I2C_STAT=%x\n", printf ("timed out in wait_for_bb: I2C_STAT=%x\n",
inw (I2C_STAT)); inw (I2C_STAT));
} }
outw(0xFFFF, I2C_STAT); /* clear delayed stuff*/ outw(0xFFFF, I2C_STAT); /* clear delayed stuff*/
} }
static u16 wait_for_pin (void) static u16 wait_for_pin (void)
@ -309,7 +309,7 @@ static u16 wait_for_pin (void)
if (timeout <= 0) { if (timeout <= 0) {
printf ("timed out in wait_for_pin: I2C_STAT=%x\n", printf ("timed out in wait_for_pin: I2C_STAT=%x\n",
inw (I2C_STAT)); inw (I2C_STAT));
outw(0xFFFF, I2C_STAT); outw(0xFFFF, I2C_STAT);
} }
return status; return status;
} }

1
include/asm-arm/arch-arm1136/bits.h
Unescape View File

@ -46,4 +46,3 @@
#define BIT31 (1<<31) #define BIT31 (1<<31)
#endif #endif

1
include/asm-arm/arch-arm1136/clocks.h
Unescape View File

@ -76,4 +76,3 @@
#define LDELAY 12000000 #define LDELAY 12000000
#endif #endif

1
include/asm-arm/arch-arm1136/omap2420.h
Unescape View File

@ -197,4 +197,3 @@
#endif /* endif CONFIG_2420H4 */ #endif /* endif CONFIG_2420H4 */
#endif #endif

1
include/asm-arm/arch-arm1136/rev.h
Unescape View File

@ -56,4 +56,3 @@ typedef struct h4_system_data {
#define CPU_2420_ES2 2 #define CPU_2420_ES2 2
#endif #endif

1
include/asm-arm/arch-arm1136/sizes.h
Unescape View File

@ -47,4 +47,3 @@
#define SZ_2G 0x80000000 #define SZ_2G 0x80000000
#endif /* __sizes_h */ #endif /* __sizes_h */

1
include/asm-arm/arch-arm1136/sys_info.h
Unescape View File

@ -75,4 +75,3 @@ typedef struct h4_system_data {
#define I2C_MENELAUS 0x72 /* i2c id for companion chip */ #define I2C_MENELAUS 0x72 /* i2c id for companion chip */
#endif #endif

1
include/asm-arm/arch-arm1136/sys_proto.h
Unescape View File

@ -45,4 +45,3 @@ u32 get_board_type(void);
void display_board_info(u32); void display_board_info(u32);
void update_mux(u32,u32); void update_mux(u32,u32);
#endif #endif

4
include/configs/RPXlite_DW.h
Unescape View File

@ -108,7 +108,7 @@
"lcd=setenv stdout lcd;setenv stdin lcd\0" \ "lcd=setenv stdout lcd;setenv stdin lcd\0" \
"ser=setenv stdout serial;setenv stdin serial\0" \ "ser=setenv stdout serial;setenv stdin serial\0" \
"verify=no" "verify=no"
======= =======
"kernel_addr=ff080000\0" \ "kernel_addr=ff080000\0" \
"ramdisk_addr=ff200000\0" \ "ramdisk_addr=ff200000\0" \
@ -209,7 +209,7 @@
<<<<<<< RPXlite_DW.h <<<<<<< RPXlite_DW.h
#define CFG_RESET_ADDRESS ((ulong)((((immap_t *)CFG_IMMR)->im_clkrst.res))) #define CFG_RESET_ADDRESS ((ulong)((((immap_t *)CFG_IMMR)->im_clkrst.res)))
======= =======
#define CFG_RESET_ADDRESS ((ulong)((((immap_t *)CFG_IMMR)->im_clkrst.res))) #define CFG_RESET_ADDRESS ((ulong)((((immap_t *)CFG_IMMR)->im_clkrst.res)))

12
include/configs/omap2420h4.h
Unescape View File

@ -35,10 +35,10 @@
#define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP 1 /* in a TI OMAP core */
#define CONFIG_OMAP2420 1 /* which is in a 2420 */ #define CONFIG_OMAP2420 1 /* which is in a 2420 */
#define CONFIG_OMAP2420H4 1 /* and on a H4 board */ #define CONFIG_OMAP2420H4 1 /* and on a H4 board */
//#define CONFIG_APTIX 1 /* define if on APTIX test chip */ /*#define CONFIG_APTIX 1 #* define if on APTIX test chip */
//#define CONFIG_VIRTIO 1 /* Using Virtio simulator */ /*#define CONFIG_VIRTIO 1 #* Using Virtio simulator */
#define PRCM_CONFIG_II 1 #define PRCM_CONFIG_II 1
#define CONFIG_PARTIAL_SRAM 1 #define CONFIG_PARTIAL_SRAM 1
#include <asm/arch/omap2420.h> /* get chip and board defs */ #include <asm/arch/omap2420.h> /* get chip and board defs */
@ -70,7 +70,7 @@
/* /*
* Hardware drivers * Hardware drivers
*/ */
/* /*
* SMC91c96 Etherent * SMC91c96 Etherent
*/ */
@ -114,8 +114,8 @@
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_I2C) #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_I2C)
// I'd like to get to these. Snap kernel loads if we make MMC go // /* I'd like to get to these. Snap kernel loads if we make MMC go */
// #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_NAND | CFG_CMD_JFFS2 | CFG_CMD_DHCP | CFG_CMD_MMC | CFG_CMD_FAT | CFG_CMD_I2C) /* #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_NAND | CFG_CMD_JFFS2 | CFG_CMD_DHCP | CFG_CMD_MMC | CFG_CMD_FAT | CFG_CMD_I2C) */
#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT

Write Preview
Loading…
Cancel
Save