Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global

Signed-off-by: Wolfgang Denk <wd@denx.de>

board/amcc/katmai/katmai.c

@@ -34,6 +34,8 @@
 #undef PCIE_ENDPOINT
 /* #define PCIE_ENDPOINT 1 */
 
+DECLARE_GLOBAL_DATA_PTR;
+
 int ppc440spe_init_pcie_rootport(int port);
 void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
 
@@ -322,8 +324,6 @@ int pci_pre_init(struct pci_controller * hose )
 #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller * hose )
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/*-------------------------------------------------------------------+
 	 * Disable everything
 	 *-------------------------------------------------------------------*/

board/amcc/taishan/taishan.c

@@ -32,6 +32,8 @@
 void show_reset_reg(void);
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 int lcd_init(void);
 
 int board_early_init_f (void)
@@ -266,8 +268,6 @@ int pci_pre_init(struct pci_controller * hose )
 #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller * hose )
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/*--------------------------------------------------------------------------+
 	 * Disable everything
 	 *--------------------------------------------------------------------------*/

board/amcc/yucca/yucca.c

@@ -34,6 +34,8 @@
 #include "yucca.h"
 #include "../cpu/ppc4xx/440spe_pcie.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #undef PCIE_ENDPOINT
 /* #define PCIE_ENDPOINT 1 */
 
@@ -668,8 +670,6 @@ int pci_pre_init(struct pci_controller * hose )
 #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller * hose )
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/*-------------------------------------------------------------------+
 	 * Disable everything
 	 *-------------------------------------------------------------------*/

board/bf533-ezkit/bf533-ezkit.c

@@ -30,6 +30,8 @@
 #include "psd4256.h"
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 int checkboard(void)
 {
 #if (BFIN_CPU == ADSP_BF531)
@@ -46,7 +48,6 @@ int checkboard(void)
 
 long int initdram(int board_type)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 #ifdef DEBUG
 	int brate;
 	char *tmp = getenv("baudrate");

board/bf533-stamp/bf533-stamp.c

@@ -30,6 +30,8 @@
 #include <asm/io.h>
 #include "bf533-stamp.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define STATUS_LED_OFF 0
 #define STATUS_LED_ON  1
 
@@ -55,7 +57,6 @@ int checkboard(void)
 
 long int initdram(int board_type)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 #ifdef DEBUG
 	printf("SDRAM attributes:\n");
 	printf

board/bf537-stamp/bf537-stamp.c

@@ -32,6 +32,8 @@
 #include <asm/io.h>
 #include "ether_bf537.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define POST_WORD_ADDR 0xFF903FFC
 
 /*
@@ -132,7 +134,6 @@ void cf_outsw(unsigned short *addr, unsigned short *sect_buf, int words)
 
 long int initdram(int board_type)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 #ifdef DEBUG
 	int brate;
 	char *tmp = getenv("baudrate");

board/bf561-ezkit/bf561-ezkit.c

@@ -29,6 +29,8 @@
 #include <common.h>
 #include <asm/io.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 int checkboard(void)
 {
 	printf("CPU:   ADSP BF561\n");
@@ -39,7 +41,6 @@ int checkboard(void)
 
 long int initdram(int board_type)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 #ifdef DEBUG
 	int brate;
 	char *tmp = getenv("baudrate");

board/freescale/mpc8313erdb/sdram.c

@@ -33,10 +33,11 @@
 
 #include <asm/processor.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifndef CFG_8313ERDB_BROKEN_PMC
 static void resume_from_sleep(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	u32 magic = *(u32 *)0;
 
 	typedef void (*func_t)(void);

board/lpc2292sodimm/lpc2292sodimm.c

@@ -28,8 +28,7 @@
 #include <common.h>
 #include <clps7111.h>
 
-/* ------------------------------------------------------------------------- */
-
+DECLARE_GLOBAL_DATA_PTR;
 
 /*
  * Miscelaneous platform dependent initialisations
@@ -37,8 +36,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* Activate LED flasher */
 	IO_LEDFLSH = 0x40;
 
@@ -53,8 +50,6 @@ int board_init (void)
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 

board/mpc7448hpc2/mpc7448hpc2.c

@@ -38,6 +38,8 @@ extern void ft_cpu_setup (void *blob, bd_t *bd);
 
 #undef	DEBUG
 
+DECLARE_GLOBAL_DATA_PTR;
+
 extern void flush_data_cache (void);
 extern void invalidate_l1_instruction_cache (void);
 extern void tsi108_init_f (void);
@@ -46,8 +48,6 @@ int display_mem_map (void);
 
 void after_reloc (ulong dest_addr)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/*
 	 * Jump to the main U-Boot board init code
 	 */

board/mpc7448hpc2/tsi108_init.c

@@ -33,6 +33,8 @@
 #include <asm/processor.h>
 #include <tsi108.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 extern void mpicInit (int verbose);
 
 /*
@@ -141,7 +143,6 @@ unsigned long get_board_bus_clk (void)
 
 int board_early_init_f (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	ulong i;
 
 	gd->mem_clk = 0;
@@ -583,7 +584,6 @@ unsigned long get_l2cr (void)
 
 int misc_init_r (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 #ifdef CFG_CLK_SPREAD	/* Initialize Spread-Spectrum Clock generation */
 	ulong i;
 

board/mpl/vcma9/cmd_vcma9.c

@@ -40,6 +40,8 @@ static uchar cs8900_chksum(ushort data)
 
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 extern void print_vcma9_info(void);
 extern int vcma9_cantest(int);
 extern int vcma9_nandtest(void);
@@ -53,8 +55,6 @@ extern int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 
 int do_vcma9(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	if (strcmp(argv[1], "info") == 0)
 	{
 		print_vcma9_info();

board/sbc2410x/sbc2410x.c

@@ -35,7 +35,7 @@
 #include <linux/mtd/nand.h>
 #endif
 
-/* ------------------------------------------------------------------------- */
+DECLARE_GLOBAL_DATA_PTR;
 
 #define FCLK_SPEED 1
 
@@ -74,7 +74,6 @@ static inline void delay (unsigned long loops)
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
 	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
 
@@ -128,8 +127,6 @@ int board_init (void)
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 

board/siemens/SMN42/smn42.c

@@ -31,8 +31,7 @@
 #include <common.h>
 #include <clps7111.h>
 
-/* ------------------------------------------------------------------------- */
-
+DECLARE_GLOBAL_DATA_PTR;
 
 /*
  * Miscellaneous platform dependent initialisations
@@ -40,8 +39,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* arch number MACH_TYPE_ARMADILLO - not official*/
 	gd->bd->bi_arch_number = 83;
 
@@ -53,8 +50,6 @@ int board_init (void)
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 

board/tqm5200/tqm5200.c

@@ -43,6 +43,8 @@
 #include "mt48lc16m16a2-75.h"
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifdef CONFIG_PS2MULT
 void ps2mult_early_init(void);
 #endif
@@ -477,8 +479,6 @@ int silent_boot (void)
 
 int board_early_init_f (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	if (silent_boot())
 		gd->flags |= GD_FLG_SILENT;
 

cpu/arm720t/serial.c

@@ -129,8 +129,6 @@ serial_puts (const char *s)
 
 void serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	unsigned short divisor = 0;
 
 	switch (gd->baudrate) {

cpu/bf533/serial.c

@@ -76,7 +76,6 @@ void calc_baud(void)
 void serial_setbrg(void)
 {
 	int i;
-	DECLARE_GLOBAL_DATA_PTR;
 
 	calc_baud();
 

cpu/bf537/i2c.c

@@ -22,6 +22,8 @@
 #include <i2c.h>
 #include <asm/io.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define bfin_read16(addr) ({ unsigned __v; \
 			__asm__ __volatile__ (\
 			"%0 = w[%1] (z);\n\t"\
@@ -68,7 +70,6 @@
 
 #ifdef DEBUG_I2C
 #define PRINTD(fmt,args...)	do {	\
-	DECLARE_GLOBAL_DATA_PTR;	\
 	if (gd->have_console)		\
 		printf(fmt ,##args);	\
 	} while (0)

cpu/bf537/serial.c

@@ -52,6 +52,8 @@
 #include <asm/io.h>
 #include "serial.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 unsigned long pll_div_fact;
 
 void calc_baud(void)
@@ -74,7 +76,6 @@ void calc_baud(void)
 void serial_setbrg(void)
 {
 	int i;
-	DECLARE_GLOBAL_DATA_PTR;
 
 	calc_baud();
 

cpu/bf561/serial.c

@@ -52,6 +52,8 @@
 #include "serial.h"
 #include <asm/io.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 unsigned long pll_div_fact;
 
 void calc_baud(void)
@@ -74,7 +76,6 @@ void calc_baud(void)
 void serial_setbrg(void)
 {
 	int i;
-	DECLARE_GLOBAL_DATA_PTR;
 
 	calc_baud();
 

cpu/mcf532x/cpu.c

@@ -31,6 +31,8 @@
 
 #include <asm/immap.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
 {
 	volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG);
@@ -48,8 +50,6 @@ int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
 
 int checkcpu(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile ccm_t *ccm = (ccm_t *) MMAP_CCM;
 	u16 msk;
 	u16 id = 0;

cpu/mcf532x/speed.c

@@ -30,6 +30,8 @@
 
 #include <asm/immap.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* PLL min/max specifications */
 #define MAX_FVCO	500000	/* KHz */
 #define MAX_FSYS	80000	/* KHz */
@@ -208,8 +210,6 @@ int clock_pll(int fsys, int flags)
  */
 int get_clocks(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bus_clk = clock_pll(CFG_CLK / 1000, 0) * 1000;
 	gd->cpu_clk = (gd->bus_clk * 3);
 	return (0);

cpu/mpc86xx/cpu_init.c

@@ -29,6 +29,8 @@
 #include <common.h>
 #include <mpc86xx.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /*
  * Breathe some life into the CPU...
  *
@@ -38,7 +40,6 @@
 
 void cpu_init_f(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	volatile immap_t    *immap = (immap_t *)CFG_IMMR;
 	volatile ccsr_lbc_t *memctl = &immap->im_lbc;
 

cpu/mpc86xx/speed.c

@@ -29,6 +29,7 @@
 #include <mpc86xx.h>
 #include <asm/processor.h>
 
+DECLARE_GLOBAL_DATA_PTR;
 
 void get_sys_info(sys_info_t *sysInfo)
 {
@@ -96,7 +97,6 @@ void get_sys_info(sys_info_t *sysInfo)
 
 int get_clocks(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	sys_info_t sys_info;
 
 	get_sys_info(&sys_info);

cpu/mpc86xx/traps.c

@@ -34,6 +34,8 @@
 #include <command.h>
 #include <asm/processor.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #if defined(CONFIG_CMD_KGDB)
 int (*debugger_exception_handler)(struct pt_regs *) = 0;
 #endif
@@ -50,8 +52,6 @@ extern unsigned long search_exception_table(unsigned long);
 void
 print_backtrace(unsigned long *sp)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int cnt = 0;
 	unsigned long i;
 

drivers/qe/qe.c

@@ -30,6 +30,8 @@
 qe_map_t		*qe_immr = NULL;
 static qe_snum_t	snums[QE_NUM_OF_SNUM];
 
+DECLARE_GLOBAL_DATA_PTR;
+
 void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data)
 {
 	u32           cecr;
@@ -51,8 +53,6 @@ void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data)
 
 uint qe_muram_alloc(uint size, uint align)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	uint	retloc;
 	uint	align_mask, off;
 	uint	savebase;
@@ -158,8 +158,6 @@ void qe_put_snum(u8 snum)
 
 void qe_init(uint qe_base)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* Init the QE IMMR base */
 	qe_immr = (qe_map_t *)qe_base;
 
@@ -204,7 +202,6 @@ void qe_assign_page(uint snum, uint para_ram_base)
 
 int qe_set_brg(uint brg, uint rate)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	volatile uint	*bp;
 	u32		divisor;
 	int		div16 = 0;

drivers/usbdcore_mpc8xx.c

@@ -64,6 +64,8 @@
 #include "usbdcore_mpc8xx.h"
 #include "usbdcore_ep0.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define ERR(fmt, args...)\
 	serial_printf("ERROR : [%s] %s:%d: "fmt,\
 				__FILE__,__FUNCTION__,__LINE__, ##args)
@@ -1216,7 +1218,6 @@ static void mpc8xx_udc_clock_init (volatile immap_t * immr,
 #elif defined(CFG_USB_BRGCLK)
 
 	/* This has been tested with brgclk == 50MHz */
-	DECLARE_GLOBAL_DATA_PTR;
 	int divisor = 0;
 
 	if (gd->cpu_clk < 48000000L) {

include/configs/atstk1002.h

@@ -183,10 +183,9 @@
 #define CFG_LONGHELP			1
 
 #define CFG_MEMTEST_START						\
-	({ DECLARE_GLOBAL_DATA_PTR; gd->bd->bi_dram[0].start; })
+	({ gd->bd->bi_dram[0].start; })
 #define CFG_MEMTEST_END							\
 	({								\
-		DECLARE_GLOBAL_DATA_PTR;				\
 		gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size;	\
 	})
 #define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }

lib_blackfin/board.c

@@ -42,6 +42,8 @@
 int post_flag;
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifndef CFG_NO_FLASH
 extern flash_info_t flash_info[];
 #endif
@@ -126,8 +128,6 @@ static void display_flash_config(ulong size)
 
 static int init_baudrate(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	char tmp[64];
 	int i = getenv_r("baudrate", tmp, sizeof(tmp));
 	gd->bd->bi_baudrate = gd->baudrate = (i > 0)
@@ -139,7 +139,6 @@ static int init_baudrate(void)
 #ifdef DEBUG
 static void display_global_data(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	bd_t *bd;
 	bd = gd->bd;
 	printf("--flags:%x\n", gd->flags);
@@ -256,7 +255,6 @@ void init_cplbtables(void)
 
 void board_init_f(ulong bootflag)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	ulong addr;
 	bd_t *bd;
 	int i;
@@ -325,7 +323,6 @@ static int init_func_i2c(void)
 
 void board_init_r(gd_t * id, ulong dest_addr)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	ulong size;
 	extern void malloc_bin_reloc(void);
 	char *s, *e;

lib_blackfin/post.c

@@ -32,14 +32,14 @@
 
 #ifdef CONFIG_POST
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define POST_MAX_NUMBER		32
 
 #define BOOTMODE_MAGIC	0xDEAD0000
 
 int post_init_f(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int res = 0;
 	unsigned int i;
 
@@ -62,7 +62,6 @@ int post_init_f(void)
 
 void post_bootmode_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	int bootmode = post_bootmode_get(0);
 	int newword;
 
@@ -109,20 +108,17 @@ int post_bootmode_get(unsigned int *last_test)
 /* POST tests run before relocation only mark status bits .... */
 static void post_log_mark_start(unsigned long testid)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	gd->post_log_word |= (testid) << 16;
 }
 
 static void post_log_mark_succ(unsigned long testid)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	gd->post_log_word |= testid;
 }
 
 /* ... and the messages are output once we are relocated */
 void post_output_backlog(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	int j;
 
 	for (j = 0; j < post_list_size; j++) {
@@ -372,8 +368,6 @@ int post_log(char *format, ...)
 
 void post_reloc(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	unsigned int i;
 
 	/*