Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE

The change is currently needed to be able to remove the board
configuration scripting from the top level Makefile and replace it by
a simple, table driven script.

Moving this configuration setting into the "CONFIG_*" name space is
also desirable because it is needed if we ever should move forward to
a Kconfig driven configuration system.

Signed-off-by: Wolfgang Denk <wd@denx.de>

Makefile

@@ -330,18 +330,18 @@ $(obj)u-boot.ldr.srec:	$(obj)u-boot.ldr
 
 $(obj)u-boot.img:	$(obj)u-boot.bin
 		$(obj)tools/mkimage -A $(ARCH) -T firmware -C none \
-		-a $(TEXT_BASE) -e 0 \
+		-a $(CONFIG_SYS_TEXT_BASE) -e 0 \
 		-n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
 			sed -e 's/"[	 ]*$$/ for $(BOARD) board"/') \
 		-d $< $@
 
 $(obj)u-boot.imx:       $(obj)u-boot.bin
 		$(obj)tools/mkimage -n $(IMX_CONFIG) -T imximage \
-		-e $(TEXT_BASE) -d $< $@
+		-e $(CONFIG_SYS_TEXT_BASE) -d $< $@
 
 $(obj)u-boot.kwb:       $(obj)u-boot.bin
 		$(obj)tools/mkimage -n $(KWD_CONFIG) -T kwbimage \
-		-a $(TEXT_BASE) -e $(TEXT_BASE) -d $< $@
+		-a $(CONFIG_SYS_TEXT_BASE) -e $(TEXT_BASE) -d $< $@
 
 $(obj)u-boot.sha1:	$(obj)u-boot.bin
 		$(obj)tools/ubsha1 $(obj)u-boot.bin
@@ -518,9 +518,9 @@ digsy_mtc_RAMBOOT_config:	unconfig
 	@mkdir -p $(obj)board/digsy_mtc
 	@ >$(obj)include/config.h
 	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
-		echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp
+		echo "CONFIG_SYS_TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp
 	@[ -z "$(findstring RAMBOOT_,$@)" ] || \
-		echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp
+		echo "CONFIG_SYS_TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp
 	@$(MKCONFIG) -n $@ -a digsy_mtc powerpc mpc5xxx digsy_mtc
 
 galaxy5200_LOWBOOT_config \
@@ -542,11 +542,11 @@ icecube_5200_DDR_LOWBOOT08_config:	unconfig
 	@mkdir -p $(obj)board/icecube
 	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
 		if [ "$(findstring DDR,$@)" ] ; \
-			then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
+			then echo "CONFIG_SYS_TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
-			else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
+			else echo "CONFIG_SYS_TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
 		fi
 	@[ -z "$(findstring LOWBOOT08,$@)" ] || \
-		echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp
+		echo "CONFIG_SYS_TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp
 	@[ -z "$(findstring DDR,$@)" ] || \
 		echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h
 	@$(MKCONFIG) -n $@ -a IceCube powerpc mpc5xxx icecube
@@ -561,7 +561,7 @@ lite5200b_LOWBOOT_config:	unconfig
 	@[ -z "$(findstring _PM_,$@)" ] || \
 		echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h
 	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
-		echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp
+		echo "CONFIG_SYS_TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp
 	@$(MKCONFIG) -n $@ -a IceCube  powerpc mpc5xxx icecube
 
 mcc200_config	\
@@ -579,7 +579,7 @@ prs200_highboot_DDR_config:	unconfig
 	@mkdir -p $(obj)include
 	@mkdir -p $(obj)board/mcc200
 	@[ -z "$(findstring highboot,$@)" ] || \
-		echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp
+		echo "CONFIG_SYS_TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp
 	@[ -n "$(findstring _SDRAM,$@)" ] || \
 		if [ -n "$(findstring prs200,$@)" ]; \
 		then \
@@ -614,7 +614,7 @@ pcm030_LOWBOOT_config:	unconfig
 	@mkdir -p $(obj)include $(obj)board/phytec/pcm030
 	@ >$(obj)include/config.h
 	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
-		echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp
+		echo "CONFIG_SYS_TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp
 	@$(MKCONFIG) -n $@ -a pcm030 powerpc mpc5xxx pcm030 phytec
 
 PM520_config \
@@ -653,7 +653,7 @@ Total5200_Rev2_lowboot_config:	unconfig
 	@[ -z "$(findstring Rev2_,$@)" ] || \
 		echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h
 	@[ -z "$(findstring lowboot_,$@)" ] || \
-		echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp
+		echo "CONFIG_SYS_TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp
 	@$(MKCONFIG) -n $@ -a Total5200 powerpc mpc5xxx total5200
 
 cam5200_config \
@@ -688,7 +688,7 @@ TQM5200_STK100_config:	unconfig
 		  echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
 		}
 	@[ -z "$(findstring HIGHBOOT,$@)" ] || \
-		echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp
+		echo "CONFIG_SYS_TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp
 	@$(MKCONFIG) -n $@ -a TQM5200 powerpc mpc5xxx tqm5200 tqc
 
 #########################################################################
@@ -921,7 +921,7 @@ acadia_nand_config:	unconfig
 	@mkdir -p $(obj)include $(obj)board/amcc/acadia
 	@mkdir -p $(obj)nand_spl/board/amcc/acadia
 	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
-	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
+	@echo "CONFIG_SYS_TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
 	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
 	@$(MKCONFIG) -n $@ -a acadia powerpc ppc4xx acadia amcc
 
@@ -929,7 +929,7 @@ bamboo_nand_config:	unconfig
 	@mkdir -p $(obj)include $(obj)board/amcc/bamboo
 	@mkdir -p $(obj)nand_spl/board/amcc/bamboo
 	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
-	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
+	@echo "CONFIG_SYS_TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
 	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
 	@$(MKCONFIG) -n $@ -a bamboo powerpc ppc4xx bamboo amcc
 
@@ -949,7 +949,7 @@ glacier_nand_config:	unconfig
 	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
 	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \
 		tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
-	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp
+	@echo "CONFIG_SYS_TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp
 	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
 	@$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc
 
@@ -977,7 +977,7 @@ fx12mm_flash_config: unconfig
 	@mkdir -p $(obj)include $(obj)board/avnet/fx12mm
 	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
 		> $(obj)board/avnet/fx12mm/config.tmp
-	@echo "TEXT_BASE := 0xFFCB0000" \
+	@echo "CONFIG_SYS_TEXT_BASE := 0xFFCB0000" \
 		>> $(obj)board/avnet/fx12mm/config.tmp
 	@$(MKCONFIG) fx12mm powerpc ppc4xx fx12mm avnet
 
@@ -986,7 +986,7 @@ fx12mm_config: unconfig
 	@mkdir -p $(obj)include $(obj)board/avnet/fx12mm
 	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
 		> $(obj)board/avnet/fx12mm/config.tmp
-	@echo "TEXT_BASE := 0x03000000" \
+	@echo "CONFIG_SYS_TEXT_BASE := 0x03000000" \
 		>> $(obj)board/avnet/fx12mm/config.tmp
 	@$(MKCONFIG) fx12mm powerpc ppc4xx fx12mm avnet
 
@@ -1014,7 +1014,7 @@ haleakala_nand_config: unconfig
 	@mkdir -p $(obj)include $(obj)board/amcc/kilauea
 	@mkdir -p $(obj)nand_spl/board/amcc/kilauea
 	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
-	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp
+	@echo "CONFIG_SYS_TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp
 	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
 	@$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc
 
@@ -1029,7 +1029,7 @@ ml507_flash_config: unconfig
 	@mkdir -p $(obj)include $(obj)board/xilinx/ml507
 	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
 		> $(obj)board/xilinx/ml507/config.tmp
-	@echo "TEXT_BASE := 0xFE360000" \
+	@echo "CONFIG_SYS_TEXT_BASE := 0xFE360000" \
 		>> $(obj)board/xilinx/ml507/config.tmp
 	@$(MKCONFIG) ml507 powerpc ppc4xx ml507 xilinx
 
@@ -1038,7 +1038,7 @@ ml507_config: unconfig
 	@mkdir -p $(obj)include $(obj)board/xilinx/ml507
 	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
 		> $(obj)board/xilinx/ml507/config.tmp
-	@echo "TEXT_BASE := 0x04000000"  \
+	@echo "CONFIG_SYS_TEXT_BASE := 0x04000000"  \
 		>> $(obj)board/xilinx/ml507/config.tmp
 	@$(MKCONFIG) $@ powerpc ppc4xx ml507 xilinx
 
@@ -1080,7 +1080,7 @@ rainier_nand_config: unconfig
 	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
 	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
 		tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
-	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
+	@echo "CONFIG_SYS_TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
 	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
 	@$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
 
@@ -1090,7 +1090,7 @@ rainier_ramboot_config: unconfig
 	@echo "#define CONFIG_SYS_RAMBOOT" > $(obj)include/config.h
 	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
 		tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
-	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
+	@echo "CONFIG_SYS_TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
 	@echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \
 		$(obj)board/amcc/sequoia/config.tmp
 	@$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
@@ -1100,7 +1100,7 @@ v5fx30teval_config: unconfig
 	@mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
 	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
 		> $(obj)board/avnet/v5fx30teval/config.tmp
-	@echo "TEXT_BASE := 0x03000000" \
+	@echo "CONFIG_SYS_TEXT_BASE := 0x03000000" \
 		>> $(obj)board/avnet/v5fx30teval/config.tmp
 	@$(MKCONFIG) $@ powerpc ppc4xx v5fx30teval avnet
 
@@ -1109,7 +1109,7 @@ v5fx30teval_flash_config: unconfig
 	@mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
 	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
 		> $(obj)board/avnet/v5fx30teval/config.tmp
-	@echo "TEXT_BASE := 0xFF1C0000" \
+	@echo "CONFIG_SYS_TEXT_BASE := 0xFF1C0000" \
 		>> $(obj)board/avnet/v5fx30teval/config.tmp
 	@$(MKCONFIG) v5fx30teval powerpc ppc4xx v5fx30teval avnet
 
@@ -1126,7 +1126,7 @@ xilinx-ppc405-generic_flash_config: unconfig
 	@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
 	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
 		> $(obj)board/xilinx/ppc405-generic/config.tmp
-	@echo "TEXT_BASE := 0xFE360000" \
+	@echo "CONFIG_SYS_TEXT_BASE := 0xFE360000" \
 		>> $(obj)board/xilinx/ppc405-generic/config.tmp
 	@$(MKCONFIG) xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx
 
@@ -1134,7 +1134,7 @@ xilinx-ppc405-generic_config: unconfig
 	@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
 	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
 		> $(obj)board/xilinx/ppc405-generic/config.tmp
-	@echo "TEXT_BASE := 0x04000000" \
+	@echo "CONFIG_SYS_TEXT_BASE := 0x04000000" \
 		>> $(obj)board/xilinx/ppc405-generic/config.tmp
 	@$(MKCONFIG) xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx
 
@@ -1142,7 +1142,7 @@ xilinx-ppc440-generic_flash_config: unconfig
 	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
 	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
 		> $(obj)board/xilinx/ppc440-generic/config.tmp
-	@echo "TEXT_BASE := 0xFE360000" \
+	@echo "CONFIG_SYS_TEXT_BASE := 0xFE360000" \
 		>> $(obj)board/xilinx/ppc440-generic/config.tmp
 	@$(MKCONFIG) xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx
 
@@ -1150,7 +1150,7 @@ xilinx-ppc440-generic_config: unconfig
 	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
 	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
 		> $(obj)board/xilinx/ppc440-generic/config.tmp
-	@echo "TEXT_BASE := 0x04000000" \
+	@echo "CONFIG_SYS_TEXT_BASE := 0x04000000" \
 		>> $(obj)board/xilinx/ppc440-generic/config.tmp
 	@$(MKCONFIG) xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx
 
@@ -1265,7 +1265,7 @@ PQ2FADS-ZU_66MHz_lowboot_config	\
 	$(if $(findstring VR,$@), \
 	@echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h))
 	@[ -z "$(findstring lowboot_,$@)" ] || \
-		echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp
+		echo "CONFIG_SYS_TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp
 	@$(MKCONFIG) -n $@ -a MPC8260ADS powerpc mpc8260 mpc8260ads freescale
 
 muas3001_dev_config \
@@ -1295,7 +1295,7 @@ PM826_ROMBOOT_BIGFLASH_config:	unconfig
 	fi
 	@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
 		echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
-		echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
+		echo "CONFIG_SYS_TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
 		if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
 			echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
 		fi; \
@@ -1303,9 +1303,9 @@ PM826_ROMBOOT_BIGFLASH_config:	unconfig
 		if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
 			$(XECHO) "... with 32 MB Flash" ; \
 			echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
-			echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \
+			echo "CONFIG_SYS_TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \
 		else \
-			echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \
+			echo "CONFIG_SYS_TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \
 		fi; \
 	fi
 	@$(MKCONFIG) -n $@ -a PM826 powerpc mpc8260 pm826
@@ -1321,7 +1321,7 @@ PM828_ROMBOOT_PCI_config:	unconfig
 	fi
 	@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
 		echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
-		echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
+		echo "CONFIG_SYS_TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
 	fi
 	@$(MKCONFIG) -n $@ -a PM828 powerpc mpc8260 pm828
 
@@ -1397,13 +1397,13 @@ M52277EVB_stmicro_config :	unconfig
 	esac; \
 	if [ "$${FLASH}" = "SPANSION" ] ; then \
 		echo "#define CONFIG_SYS_SPANSION_BOOT"	>> $(obj)include/config.h ; \
-		echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \
+		echo "CONFIG_SYS_TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \
 		cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \
 	fi; \
 	if [ "$${FLASH}" = "STMICRO" ] ; then \
 		echo "#define CONFIG_CF_SBF"	>> $(obj)include/config.h ; \
 		echo "#define CONFIG_SYS_STMICRO_BOOT"	>> $(obj)include/config.h ; \
-		echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \
+		echo "CONFIG_SYS_TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \
 		cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \
 	fi
 	@$(MKCONFIG) -n $@ -a M52277EVB m68k mcf5227x m52277evb freescale
@@ -1418,10 +1418,10 @@ M5235EVB_Flash32_config:	unconfig
 	esac; \
 	if [ "$${FLASH}" != "16" ] ; then \
 		echo "#define NORFLASH_PS32BIT	1" >> $(obj)include/config.h ; \
-		echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
+		echo "CONFIG_SYS_TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
 		cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \
 	else \
-		echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
+		echo "CONFIG_SYS_TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
 		cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \
 	fi
 	@$(MKCONFIG) -n $@ -a M5235EVB m68k mcf523x m5235evb freescale
@@ -1432,13 +1432,13 @@ cobra5272_config :		unconfig
 EB+MCF-EV123_config :		unconfig
 	@mkdir -p $(obj)include
 	@mkdir -p $(obj)board/BuS/EB+MCF-EV123
-	@echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
+	@echo "CONFIG_SYS_TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
 	@$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
 
 EB+MCF-EV123_internal_config :	unconfig
 	@mkdir -p $(obj)include
 	@mkdir -p $(obj)board/BuS/EB+MCF-EV123
-	@echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
+	@echo "CONFIG_SYS_TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
 	@$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
 
 M5329AFEE_config \
@@ -1468,13 +1468,13 @@ M54451EVB_stmicro_config :	unconfig
 	M54451EVB_stmicro_config)	FLASH=STMICRO;; \
 	esac; \
 	if [ "$${FLASH}" = "NOR" ] ; then \
-		echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \
+		echo "CONFIG_SYS_TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \
 		cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \
 	fi; \
 	if [ "$${FLASH}" = "STMICRO" ] ; then \
 		echo "#define CONFIG_CF_SBF"	>> $(obj)include/config.h ; \
 		echo "#define CONFIG_SYS_STMICRO_BOOT"	>> $(obj)include/config.h ; \
-		echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \
+		echo "CONFIG_SYS_TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \
 		cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \
 	fi; \
 	echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ;
@@ -1500,18 +1500,18 @@ M54455EVB_stm33_config :	unconfig
 	esac; \
 	if [ "$${FLASH}" = "INTEL" ] ; then \
 		echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \
-		echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
+		echo "CONFIG_SYS_TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
 		cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
 	fi; \
 	if [ "$${FLASH}" = "ATMEL" ] ; then \
 		echo "#define CONFIG_SYS_ATMEL_BOOT"	>> $(obj)include/config.h ; \
-		echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
+		echo "CONFIG_SYS_TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
 		cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
 	fi; \
 	if [ "$${FLASH}" = "STMICRO" ] ; then \
 		echo "#define CONFIG_CF_SBF"	>> $(obj)include/config.h ; \
 		echo "#define CONFIG_SYS_STMICRO_BOOT"	>> $(obj)include/config.h ; \
-		echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \
+		echo "CONFIG_SYS_TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \
 		cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \
 	fi; \
 	echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
@@ -1602,7 +1602,7 @@ MPC8313ERDB_NAND_66_config: unconfig
 		echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _NAND_,$@)" ] ; then \
-		echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \
+		echo "CONFIG_SYS_TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \
 		echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \
 	fi ;
 	@if [ "$(findstring _NAND_,$@)" ] ; then \
@@ -1648,10 +1648,10 @@ MPC8349ITXGP_config:	unconfig
 	@mkdir -p $(obj)board/freescale/mpc8349itx
 	@echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h
 	@if [ "$(findstring GP,$@)" ] ; then \
-		echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
+		echo "CONFIG_SYS_TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
 	fi
 	@if [ "$(findstring LOWBOOT,$@)" ] ; then \
-		echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
+		echo "CONFIG_SYS_TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
 	fi
 	@$(MKCONFIG) -n $@ -a MPC8349ITX powerpc mpc83xx mpc8349itx freescale
 
@@ -2135,12 +2135,12 @@ trab_old_config:	unconfig
 	@[ -z "$(findstring _bigflash,$@)" ] || \
 		{ echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \
 		  echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
-		  echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
+		  echo "CONFIG_SYS_TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
 		}
 	@[ -z "$(findstring _old,$@)" ] || \
 		{ echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
 		  echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
-		  echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
+		  echo "CONFIG_SYS_TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
 		}
 	@$(MKCONFIG) -n $@ -a trab arm arm920t trab - s3c24x0
 
@@ -2420,7 +2420,7 @@ sh7785lcr_config  :   unconfig
 	@echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h
 	@if [ "$(findstring 32bit, $@)" ] ; then \
 		echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \
-		echo "TEXT_BASE = 0x8ff80000" > \
+		echo "CONFIG_SYS_TEXT_BASE = 0x8ff80000" > \
 			$(obj)board/renesas/sh7785lcr/config.tmp ; \
 	fi
 	@$(MKCONFIG) -n $@ -a sh7785lcr sh sh4 sh7785lcr renesas

README

@@ -2248,7 +2248,7 @@ Configuration Settings:
 - CONFIG_SYS_MONITOR_BASE:
 		Physical start address of boot monitor code (set by
 		make config files to be same as the text base address
-		(TEXT_BASE) used when linking) - same as
+		(CONFIG_SYS_TEXT_BASE) used when linking) - same as
 		CONFIG_SYS_FLASH_BASE when booting from flash.
 
 - CONFIG_SYS_MONITOR_LEN:

arch/arm/cpu/arm1136/start.S

@@ -87,7 +87,7 @@ _end_vect:
 
 .globl _TEXT_BASE
 _TEXT_BASE:
-	.word	TEXT_BASE
+	.word	CONFIG_SYS_TEXT_BASE
 
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 .globl _armboot_start

arch/arm/cpu/arm1176/start.S

@@ -97,7 +97,7 @@ _end_vect:
 
 .globl _TEXT_BASE
 _TEXT_BASE:
-	.word	TEXT_BASE
+	.word	CONFIG_SYS_TEXT_BASE
 
 /*
  * Below variable is very important because we use MMU in U-Boot.
@@ -205,7 +205,7 @@ cpu_init_crit:
 
 	/* Prepare to disable the MMU */
 	adr	r2, mmu_disable_phys
-	sub	r2, r2, #(CONFIG_SYS_PHY_UBOOT_BASE - TEXT_BASE)
+	sub	r2, r2, #(CONFIG_SYS_PHY_UBOOT_BASE - CONFIG_SYS_TEXT_BASE)
 	b	mmu_disable
 
 	.align 5
@@ -444,7 +444,7 @@ cpu_init_crit:
 
 	/* Prepare to disable the MMU */
 	adr	r2, mmu_disable_phys
-	sub	r2, r2, #(CONFIG_SYS_PHY_UBOOT_BASE - TEXT_BASE)
+	sub	r2, r2, #(CONFIG_SYS_PHY_UBOOT_BASE - CONFIG_SYS_TEXT_BASE)
 	b	mmu_disable
 
 	.align 5

arch/arm/cpu/arm720t/start.S

@@ -77,7 +77,7 @@ _fiq:			.word fiq
 
 .globl _TEXT_BASE
 _TEXT_BASE:
-	.word	TEXT_BASE
+	.word	CONFIG_SYS_TEXT_BASE
 
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 .globl _armboot_start
@@ -298,11 +298,11 @@ relocate:				/* relocate U-Boot to RAM	    */
 	cmp	r0, r1			/* don't reloc during debug	    */
 	beq	stack_setup
 
-#if TEXT_BASE
+#if CONFIG_SYS_TEXT_BASE
 #ifndef CONFIG_LPC2292 /* already done in lowlevel_init */
 	ldr	r2, =0x0		/* Relocate the exception vectors   */
 	cmp	r1, r2			/* and associated data to address   */
-	ldmneia r0!, {r3-r10}		/* 0x0. Do nothing if TEXT_BASE is  */
+	ldmneia r0!, {r3-r10}		/* 0x0. Do nothing if CONFIG_SYS_TEXT_BASE is  */
 	stmneia r2!, {r3-r10}		/* 0x0. Copy the first 15 words.    */
 	ldmneia r0, {r3-r9}
 	stmneia r2, {r3-r9}
@@ -755,7 +755,7 @@ reset_cpu:
 	ldr	r0, [r1, #+NETARM_MEM_CS0_BASE_ADDR]
 	ldr	r1, =0xFFFFF000
 	and	r0, r1, r0
-	ldr	r1, =(relocate-TEXT_BASE)
+	ldr	r1, =(relocate-CONFIG_SYS_TEXT_BASE)
 	add	r0, r1, r0
 	ldr	r4, =NETARM_GEN_MODULE_BASE
 	ldr	r1, =NETARM_GEN_SW_SVC_RESETA

arch/arm/cpu/arm920t/at91/lowlevel_init.S

@@ -39,9 +39,9 @@
 _MTEXT_BASE:
 #undef START_FROM_MEM
 #ifdef START_FROM_MEM
-	.word	TEXT_BASE-PHYS_FLASH_1
+	.word	CONFIG_SYS_TEXT_BASE-PHYS_FLASH_1
 #else
-	.word	TEXT_BASE
+	.word	CONFIG_SYS_TEXT_BASE
 #endif
 
 .globl lowlevel_init

arch/arm/cpu/arm920t/at91rm9200/lowlevel_init.S

@@ -43,9 +43,9 @@
 _MTEXT_BASE:
 #undef START_FROM_MEM
 #ifdef START_FROM_MEM
-	.word	TEXT_BASE-PHYS_FLASH_1
+	.word	CONFIG_SYS_TEXT_BASE-PHYS_FLASH_1
 #else
-	.word	TEXT_BASE
+	.word	CONFIG_SYS_TEXT_BASE
 #endif
 
 .globl lowlevel_init

arch/arm/cpu/arm920t/start.S

@@ -72,7 +72,7 @@ _fiq:			.word fiq
 
 .globl _TEXT_BASE
 _TEXT_BASE:
-	.word	TEXT_BASE
+	.word	CONFIG_SYS_TEXT_BASE
 
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 .globl _armboot_start

arch/arm/cpu/arm925t/start.S

@@ -83,7 +83,7 @@ _fiq:			.word fiq
 
 .globl _TEXT_BASE
 _TEXT_BASE:
-	.word	TEXT_BASE
+	.word	CONFIG_SYS_TEXT_BASE
 
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 .globl _armboot_start

arch/arm/cpu/arm926ejs/at91/lowlevel_init.S

@@ -43,7 +43,7 @@
 #endif
 
 _TEXT_BASE:
-	.word	TEXT_BASE
+	.word	CONFIG_SYS_TEXT_BASE
 
 .globl lowlevel_init
 .type lowlevel_init,function
@@ -54,7 +54,7 @@ POS1:
 	ldr	r0, =POS1	/* r0 = POS1 compile */
 	ldr	r2, _TEXT_BASE
 	sub	r0, r0, r2	/* r0 = POS1-_TEXT_BASE (POS1 relative) */
-	sub	r5, r5, r0	/* r0 = TEXT_BASE-1 */
+	sub	r5, r5, r0	/* r0 = CONFIG_SYS_TEXT_BASE-1 */
 	sub	r5, r5, #4	/* r1 = text base - current */
 
 	/* memory control configuration 1 */

arch/arm/cpu/arm926ejs/start.S

@@ -116,7 +116,7 @@ _fiq:
 
 .globl _TEXT_BASE
 _TEXT_BASE:
-	.word	TEXT_BASE
+	.word	CONFIG_SYS_TEXT_BASE
 
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 .globl _armboot_start

arch/arm/cpu/arm946es/start.S

@@ -87,7 +87,7 @@ _fiq:
 
 .globl _TEXT_BASE
 _TEXT_BASE:
-	.word	TEXT_BASE
+	.word	CONFIG_SYS_TEXT_BASE
 
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 .globl _armboot_start

arch/arm/cpu/arm_intcm/start.S

@@ -85,7 +85,7 @@ _fiq:
 
 .globl _TEXT_BASE
 _TEXT_BASE:
-	.word	TEXT_BASE /* address of _start in the linked image */
+	.word	CONFIG_SYS_TEXT_BASE /* address of _start in the linked image */
 
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 .globl _armboot_start

arch/arm/cpu/armv7/omap3/lowlevel_init.S

@@ -33,7 +33,7 @@
 #include <asm/arch/clocks_omap3.h>
 
 _TEXT_BASE:
-	.word	TEXT_BASE	/* sdram load addr from config.mk */
+	.word	CONFIG_SYS_TEXT_BASE	/* sdram load addr from config.mk */
 
 #if !defined(CONFIG_SYS_NAND_BOOT) && !defined(CONFIG_SYS_NAND_BOOT)
 /**************************************************************************

arch/arm/cpu/armv7/start.S

@@ -67,7 +67,7 @@ _end_vect:
 
 .globl _TEXT_BASE
 _TEXT_BASE:
-	.word	TEXT_BASE
+	.word	CONFIG_SYS_TEXT_BASE
 
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 .globl _armboot_start

arch/arm/cpu/ixp/start.S

@@ -95,7 +95,7 @@ _fiq:			.word fiq
 
 .globl _TEXT_BASE
 _TEXT_BASE:
-	.word	TEXT_BASE
+	.word	CONFIG_SYS_TEXT_BASE
 
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 .globl _armboot_start

arch/arm/cpu/lh7a40x/start.S

@@ -74,7 +74,7 @@ _fiq:			.word fiq
 
 .globl _TEXT_BASE
 _TEXT_BASE:
-	.word	TEXT_BASE
+	.word	CONFIG_SYS_TEXT_BASE
 
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 .globl _armboot_start

arch/arm/cpu/pxa/start.S

@@ -84,7 +84,7 @@ _fiq:			.word fiq
 
 .globl _TEXT_BASE
 _TEXT_BASE:
-	.word	TEXT_BASE
+	.word	CONFIG_SYS_TEXT_BASE
 
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 .globl _armboot_start

arch/arm/cpu/s3c44b0/start.S

@@ -65,7 +65,7 @@ _start:	b       reset
 
 .globl _TEXT_BASE
 _TEXT_BASE:
-	.word	TEXT_BASE
+	.word	CONFIG_SYS_TEXT_BASE
 
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 .globl _armboot_start

arch/arm/cpu/sa1100/start.S

@@ -75,7 +75,7 @@ _fiq:			.word fiq
 
 .globl _TEXT_BASE
 _TEXT_BASE:
-	.word	TEXT_BASE
+	.word	CONFIG_SYS_TEXT_BASE
 
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 .globl _armboot_start

arch/i386/lib/board.c

@@ -221,8 +221,8 @@ void board_init_f (ulong gdp)
 	re_end = (Elf32_Rel *)(rel_dyn_end + ((gd_t *)gdp)->load_off);
 
 	do {
-		if (re_src->r_offset >= TEXT_BASE)
+		if (re_src->r_offset >= CONFIG_SYS_TEXT_BASE)
-			if (*(Elf32_Addr *)(re_src->r_offset - rel_offset) >= TEXT_BASE)
+			if (*(Elf32_Addr *)(re_src->r_offset - rel_offset) >= CONFIG_SYS_TEXT_BASE)
 				*(Elf32_Addr *)(re_src->r_offset - rel_offset) -= rel_offset;
 	} while (re_src++ < re_end);
 

arch/m68k/cpu/mcf5227x/start.S

@@ -44,8 +44,8 @@
 	rte;
 
 #if defined(CONFIG_CF_SBF)
-#define ASM_DRAMINIT	(asm_dram_init - TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
+#define ASM_DRAMINIT	(asm_dram_init - CONFIG_SYS_TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
-#define ASM_SBF_IMG_HDR	(asm_sbf_img_hdr - TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
+#define ASM_SBF_IMG_HDR	(asm_sbf_img_hdr - CONFIG_SYS_TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
 #endif
 
 .text
@@ -138,7 +138,7 @@ vector192_255:
 asm_sbf_img_hdr:
 	.long	0x00000000	/* checksum, not yet implemented */
 	.long	0x00020000	/* image length */
-	.long	TEXT_BASE	/* image to be relocated at */
+	.long	CONFIG_SYS_TEXT_BASE	/* image to be relocated at */
 
 asm_dram_init:
 	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0
@@ -330,7 +330,7 @@ asm_dspi_rd_loop2:
 	jsr	asm_dspi_rd_status
 
 	/* jump to memory and execute */
-	move.l	#(TEXT_BASE + 0x400), %a0
+	move.l	#(CONFIG_SYS_TEXT_BASE + 0x400), %a0
 	move.l	%a0, (%a1)
 	jmp	(%a0)
 
@@ -364,7 +364,7 @@ _start:
 
 	/* Set vector base register at the beginning of the Flash */
 #if defined(CONFIG_CF_SBF)
-	move.l	#TEXT_BASE, %d0
+	move.l	#CONFIG_SYS_TEXT_BASE, %d0
 	movec	%d0, %VBR
 #else
 	move.l	#CONFIG_SYS_FLASH_BASE, %d0

arch/m68k/cpu/mcf52x2/start.S

@@ -57,8 +57,8 @@
 _vectors:
 
 .long	0x00000000		/* Flash offset is 0 until we setup CS0 */
-#if defined(CONFIG_M5282) && (TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
+#if defined(CONFIG_M5282) && (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
-.long	_start - TEXT_BASE
+.long	_start - CONFIG_SYS_TEXT_BASE
 #else
 .long	_START
 #endif
@@ -106,7 +106,7 @@ _vectors:
 
 #if defined(CONFIG_SYS_INT_FLASH_BASE) && \
     (defined(CONFIG_M5282) || defined(CONFIG_M5281))
-	#if (TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
+	#if (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
 		.long	0x55AA55AA,0xAA55AA55 /* CFM Backdoorkey */
 		.long	0xFFFFFFFF /* all sectors protected */
 		.long	0x00000000 /* supervisor/User restriction */
@@ -150,7 +150,7 @@ _start:
 	movec	%d0, %RAMBAR1
 
 #if defined(CONFIG_M5282)
-#if (TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
+#if (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
 	/* Setup code in SRAM to initialize FLASHBAR, if start from internal Flash */
 
 	move.l #(_flashbar_setup-CONFIG_SYS_INT_FLASH_BASE), %a0
@@ -174,7 +174,7 @@ _after_flashbar_copy:
 	/* Setup code to initialize FLASHBAR, if start from external Memory */
 	move.l	#(CONFIG_SYS_INT_FLASH_BASE + CONFIG_SYS_INT_FLASH_ENABLE), %d0
 	movec	%d0, %FLASHBAR
-#endif /* (TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE) */
+#endif /* (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE) */
 
 #endif
 #endif
@@ -182,7 +182,7 @@ _after_flashbar_copy:
 	 * therefore no VBR to set
 	 */
 #if !defined(CONFIG_MONITOR_IS_IN_RAM)
-#if defined(CONFIG_M5282) && (TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
+#if defined(CONFIG_M5282) && (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
 	move.l	#CONFIG_SYS_INT_FLASH_BASE, %d0
 #else
 	move.l	#CONFIG_SYS_FLASH_BASE, %d0
@@ -297,7 +297,7 @@ clear_bss:
 	/* set parameters for board_init_r */
 	move.l %a0,-(%sp)		/* dest_addr */
 	move.l %d0,-(%sp)		/* gd */
-#if defined(DEBUG) && (TEXT_BASE != CONFIG_SYS_INT_FLASH_BASE) && \
+#if defined(DEBUG) && (CONFIG_SYS_TEXT_BASE != CONFIG_SYS_INT_FLASH_BASE) && \
     defined(CONFIG_SYS_HALT_BEFOR_RAM_JUMP)
 	halt
 #endif

arch/m68k/cpu/mcf5445x/start.S

@@ -44,8 +44,8 @@
 	rte;
 
 #if defined(CONFIG_CF_SBF)
-#define ASM_DRAMINIT	(asm_dram_init - TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
+#define ASM_DRAMINIT	(asm_dram_init - CONFIG_SYS_TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
-#define ASM_SBF_IMG_HDR	(asm_sbf_img_hdr - TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
+#define ASM_SBF_IMG_HDR	(asm_sbf_img_hdr - CONFIG_SYS_TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
 #endif
 
 .text
@@ -143,7 +143,7 @@ vector192_255:
 asm_sbf_img_hdr:
 	.long	0x00000000	/* checksum, not yet implemented */
 	.long	0x00030000	/* image length */
-	.long	TEXT_BASE	/* image to be relocated at */
+	.long	CONFIG_SYS_TEXT_BASE	/* image to be relocated at */
 
 asm_dram_init:
 	move.w #0x2700,%sr		/* Mask off Interrupt */
@@ -358,7 +358,7 @@ asm_dspi_rd_loop2:
 	jsr	asm_dspi_rd_status
 
 	/* jump to memory and execute */
-	move.l	#(TEXT_BASE + 0x400), %a0
+	move.l	#(CONFIG_SYS_TEXT_BASE + 0x400), %a0
 	jmp	(%a0)
 
 asm_dspi_wr_status:

arch/microblaze/cpu/start.S

@@ -69,10 +69,10 @@ _start:
 	shi	r7, r0, 0x2
 	shi	r6, r0, 0x6
 /*
- * Copy U-Boot code to TEXT_BASE
+ * Copy U-Boot code to CONFIG_SYS_TEXT_BASE
  * solve problem with sbrk_base
  */
-#if (CONFIG_SYS_RESET_ADDRESS != TEXT_BASE)
+#if (CONFIG_SYS_RESET_ADDRESS != CONFIG_SYS_TEXT_BASE)
 	addi	r4, r0, __end
 	addi	r5, r0, __text_start
 	rsub	r4, r5, r4	/* size = __end - __text_start */

arch/microblaze/lib/board.c

@@ -122,7 +122,7 @@ void board_init (void)
 	puts ("SDRAM :\n");
 	printf ("\t\tIcache:%s\n", icache_status() ? "ON" : "OFF");
 	printf ("\t\tDcache:%s\n", dcache_status() ? "ON" : "OFF");
-	printf ("\tU-Boot Start:0x%08x\n", TEXT_BASE);
+	printf ("\tU-Boot Start:0x%08x\n", CONFIG_SYS_TEXT_BASE);
 
 #if defined(CONFIG_CMD_FLASH)
 	puts ("FLASH: ");

arch/powerpc/cpu/mpc85xx/start.S

@@ -145,7 +145,7 @@ _start_e500:
 	beq	2b
 
 	/* Setup interrupt vectors */
-	lis	r1,TEXT_BASE@h
+	lis	r1,CONFIG_SYS_TEXT_BASE@h
 	mtspr	IVPR,r1
 
 	li	r1,0x0100
@@ -291,25 +291,25 @@ _start_e500:
 	lis     r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@h
 	ori     r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@l
 
-	lis     r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xffc00000, (MAS2_I|MAS2_G))@h
+	lis     r8,FSL_BOOKE_MAS2(CONFIG_SYS_TEXT_BASE & 0xffc00000, (MAS2_I|MAS2_G))@h
-	ori     r8,r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xffc00000, (MAS2_I|MAS2_G))@l
+	ori     r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_TEXT_BASE & 0xffc00000, (MAS2_I|MAS2_G))@l
 
 	/* The 85xx has the default boot window 0xff800000 - 0xffffffff */
 	lis     r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
 	ori     r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
 #else
 	/*
-	 * create a temp mapping in AS=1 to the 1M TEXT_BASE space, the main
+	 * create a temp mapping in AS=1 to the 1M CONFIG_SYS_TEXT_BASE space, the main
-	 * image has been relocated to TEXT_BASE on the second stage.
+	 * image has been relocated to CONFIG_SYS_TEXT_BASE on the second stage.
 	 */
 	lis     r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h
 	ori     r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l
 
-	lis     r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@h
+	lis     r8,FSL_BOOKE_MAS2(CONFIG_SYS_TEXT_BASE, (MAS2_I|MAS2_G))@h
-	ori     r8,r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@l
+	ori     r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_TEXT_BASE, (MAS2_I|MAS2_G))@l
 
-	lis     r9,FSL_BOOKE_MAS3(TEXT_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
+	lis     r9,FSL_BOOKE_MAS3(CONFIG_SYS_TEXT_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
-	ori     r9,r9,FSL_BOOKE_MAS3(TEXT_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+	ori     r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_TEXT_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
 #endif
 
 	mtspr   MAS0,r6

arch/powerpc/cpu/mpc86xx/start.S

@@ -848,8 +848,8 @@ setup_ccsrbar:
 	stw	r5, 0(r4) /* Store physical value of CCSR */
 	isync
 
-	lis	r5, TEXT_BASE@h
+	lis	r5, CONFIG_SYS_TEXT_BASE@h
-	ori	r5,r5,TEXT_BASE@l
+	ori	r5,r5,CONFIG_SYS_TEXT_BASE@l
 	lwz	r5, 0(r5)
 	isync
 

arch/powerpc/lib/board.c

@@ -734,7 +734,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 
 # if defined(CONFIG_OXC) || defined(CONFIG_RMU)
 	/* flash mapped at end of memory map */
-	bd->bi_flashoffset = TEXT_BASE + flash_size;
+	bd->bi_flashoffset = CONFIG_SYS_TEXT_BASE + flash_size;
 # elif CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
 	bd->bi_flashoffset = monitor_flash_len;	/* reserved area for startup monitor  */
 # endif

arch/sh/config.mk

@@ -29,6 +29,6 @@ STANDALONE_LOAD_ADDR += -EB
 endif
 
 PLATFORM_CPPFLAGS += -DCONFIG_SH -D__SH__
-PLATFORM_LDFLAGS += -e $(TEXT_BASE) --defsym reloc_dst=$(TEXT_BASE)
+PLATFORM_LDFLAGS += -e $(CONFIG_SYS_TEXT_BASE) --defsym reloc_dst=$(TEXT_BASE)
 
 LDSCRIPT := $(SRCTREE)/$(CPUDIR)/u-boot.lds

arch/sh/lib/board.c

@@ -89,7 +89,7 @@ static int sh_pci_init(void)
 
 static int sh_mem_env_init(void)
 {
-	mem_malloc_init(TEXT_BASE - CONFIG_SYS_GBL_DATA_SIZE -
+	mem_malloc_init(CONFIG_SYS_TEXT_BASE - CONFIG_SYS_GBL_DATA_SIZE -
 			CONFIG_SYS_MALLOC_LEN, CONFIG_SYS_MALLOC_LEN - 16);
 	env_relocate();
 	jumptable_init();

arch/sparc/cpu/leon2/Makefile

@@ -44,8 +44,9 @@ $(LIB):	$(OBJS)
 include $(SRCTREE)/rules.mk
 
 $(START): $(START:.o=.S)
-	$(CC) -D__ASSEMBLY__ $(DBGFLAGS) $(OPTFLAGS) -D__KERNEL__ -DTEXT_BASE=$(TEXT_BASE) \
+	$(CC) -D__ASSEMBLY__ $(DBGFLAGS) $(OPTFLAGS) -D__KERNEL__ \
-	-I$(TOPDIR)/include -fno-builtin -ffreestanding -nostdinc -isystem $(gccincdir) -pipe \
+	-DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) -I$(TOPDIR)/include \
+	-fno-builtin -ffreestanding -nostdinc -isystem $(gccincdir) -pipe \
 	$(PLATFORM_CPPFLAGS) -Wall -Wstrict-prototypes \
 	-I$(TOPDIR)/board -c -o $(START) $(START:.o=.S)
 

arch/sparc/cpu/leon2/prom.c

@@ -50,9 +50,9 @@ extern int __prom_start;
 #define PROM_SIZE_MASK (PROM_OFFS-1)
 #define __va(x) ( \
 	(void *)( ((unsigned long)(x))-PROM_OFFS+ \
-	(CONFIG_SYS_PROM_OFFSET-phys_base)+PAGE_OFFSET-TEXT_BASE ) \
+	(CONFIG_SYS_PROM_OFFSET-phys_base)+PAGE_OFFSET-CONFIG_SYS_TEXT_BASE ) \
 	)
-#define __phy(x) ((void *)(((unsigned long)(x))-PROM_OFFS+CONFIG_SYS_PROM_OFFSET-TEXT_BASE))
+#define __phy(x) ((void *)(((unsigned long)(x))-PROM_OFFS+CONFIG_SYS_PROM_OFFSET-CONFIG_SYS_TEXT_BASE))
 
 struct property {
 	char *name;

arch/sparc/cpu/leon2/start.S

@@ -455,7 +455,7 @@ _irq_entry:
 	WRITE_PAUSE
 	mov	%l7, %o0		! irq level
 	set	handler_irq, %o1
-	set	(CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE), %o2
+	set	(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE), %o2
 	add	%o1, %o2, %o1
 	call	%o1
 	add	%sp, SF_REGS_SZ, %o1	! pt_regs ptr

arch/sparc/cpu/leon3/Makefile

@@ -44,8 +44,9 @@ $(LIB):	$(OBJS)
 include $(SRCTREE)/rules.mk
 
 $(START): $(START:.o=.S)
-	$(CC) -D__ASSEMBLY__ $(DBGFLAGS) $(OPTFLAGS) -D__KERNEL__ -DTEXT_BASE=$(TEXT_BASE) \
+	$(CC) -D__ASSEMBLY__ $(DBGFLAGS) $(OPTFLAGS) -D__KERNEL__ \
-	-I$(TOPDIR)/include -fno-builtin -ffreestanding -nostdinc -isystem $(gccincdir) -pipe \
+	-DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) -I$(TOPDIR)/include \
+	-fno-builtin -ffreestanding -nostdinc -isystem $(gccincdir) -pipe \
 	$(PLATFORM_CPPFLAGS) -Wall -Wstrict-prototypes \
 	-I$(TOPDIR)/board -c -o $(START) $(START:.o=.S)
 

arch/sparc/cpu/leon3/prom.c

@@ -54,9 +54,9 @@ extern int __prom_start;
 #define PROM_SIZE_MASK (PROM_OFFS-1)
 #define __va(x) ( \
 	(void *)( ((unsigned long)(x))-PROM_OFFS+ \
-	(CONFIG_SYS_PROM_OFFSET-phys_base)+PAGE_OFFSET-TEXT_BASE ) \
+	(CONFIG_SYS_PROM_OFFSET-phys_base)+PAGE_OFFSET-CONFIG_SYS_TEXT_BASE ) \
 	)
-#define __phy(x) ((void *)(((unsigned long)(x))-PROM_OFFS+CONFIG_SYS_PROM_OFFSET-TEXT_BASE))
+#define __phy(x) ((void *)(((unsigned long)(x))-PROM_OFFS+CONFIG_SYS_PROM_OFFSET-CONFIG_SYS_TEXT_BASE))
 
 struct property {
 	char *name;

arch/sparc/cpu/leon3/start.S

@@ -369,8 +369,8 @@ snoop_detect:
 	sethi	%hi(0x00800000), %o0
 	lda	[%g0] 2, %o1
 	and	%o0, %o1, %o0
-	sethi	%hi(leon3_snooping_avail+CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE), %o1
+	sethi	%hi(leon3_snooping_avail+CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE), %o1
-	st	%o0, [%lo(leon3_snooping_avail+CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE)+%o1]
+	st	%o0, [%lo(leon3_snooping_avail+CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE)+%o1]
 
 /*	call	relocate*/
 	nop
@@ -410,7 +410,7 @@ _irq_entry:
 	WRITE_PAUSE
 	mov	%l7, %o0		! irq level
 	set	handler_irq, %o1
-	set	(CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE), %o2
+	set	(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE), %o2
 	add	%o1, %o2, %o1
 	call	%o1
 	add	%sp, SF_REGS_SZ, %o1	! pt_regs ptr

arch/sparc/include/asm/asmmacro.h

@@ -33,8 +33,8 @@
  * c-code can be called.
  */
 #define SAVE_ALL_HEAD \
-	sethi	%hi(trap_setup+(CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE)), %l4; \
+	sethi	%hi(trap_setup+(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE)), %l4; \
-	jmpl	%l4 + %lo(trap_setup+(CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE)), %l6;
+	jmpl	%l4 + %lo(trap_setup+(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE)), %l6;
 #define SAVE_ALL \
 	SAVE_ALL_HEAD \
 	nop;

board/BuS/EB+MCF-EV123/EB+MCF-EV123.c

@@ -43,7 +43,7 @@ unsigned long display_height;
 int checkboard (void)
 {
 	puts ("Board: MCF-EV1 + MCF-EV23 (BuS Elektronik GmbH & Co. KG)\n");
-#if (TEXT_BASE ==  CONFIG_SYS_INT_FLASH_BASE)
+#if (CONFIG_SYS_TEXT_BASE ==  CONFIG_SYS_INT_FLASH_BASE)
 	puts ("       Boot from Internal FLASH\n");
 #endif
 

board/BuS/EB+MCF-EV123/config.mk

@@ -23,6 +23,6 @@
 #
 
 sinclude $(OBJTREE)/board/$(BOARDDIR)/textbase.mk
-ifndef TEXT_BASE
+ifndef CONFIG_SYS_TEXT_BASE
-TEXT_BASE = 0xFE000000
+CONFIG_SYS_TEXT_BASE = 0xFE000000
 endif

board/BuS/EB+MCF-EV123/textbase.mk

@@ -1 +1 @@
-TEXT_BASE = 0xFFE00000
+CONFIG_SYS_TEXT_BASE = 0xFFE00000

board/BuS/eb_cpux9k2/config.mk

@@ -1 +1 @@
-TEXT_BASE = 0x23f00000
+CONFIG_SYS_TEXT_BASE = 0x23f00000

board/LEOX/elpt860/config.mk

@@ -32,5 +32,5 @@
 # ELPT860 board
 #
 
-TEXT_BASE = 0x02000000
+CONFIG_SYS_TEXT_BASE = 0x02000000
-#TEXT_BASE = 0x00FB0000
+#CONFIG_SYS_TEXT_BASE = 0x00FB0000

board/LaCie/edminiv2/config.mk

@@ -24,4 +24,4 @@
 # MA 02110-1301 USA
 #
 
-TEXT_BASE = 0x00100000
+CONFIG_SYS_TEXT_BASE = 0x00100000

board/Marvell/db64360/config.mk

@@ -25,4 +25,4 @@
 # EVB64360 boards
 #
 
-TEXT_BASE = 0xfff00000
+CONFIG_SYS_TEXT_BASE = 0xfff00000

board/Marvell/db64460/config.mk

@@ -25,4 +25,4 @@
 # EVB64460 boards
 #
 
-TEXT_BASE = 0xfff00000
+CONFIG_SYS_TEXT_BASE = 0xfff00000

board/Marvell/guruplug/config.mk

@@ -22,6 +22,6 @@
 # MA 02110-1301 USA
 #
 
-TEXT_BASE = 0x00600000
+CONFIG_SYS_TEXT_BASE = 0x00600000
 
 KWD_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/kwbimage.cfg

board/Marvell/mv88f6281gtw_ge/config.mk

@@ -22,7 +22,7 @@
 # MA 02110-1301 USA
 #
 
-TEXT_BASE = 0x00600000
+CONFIG_SYS_TEXT_BASE = 0x00600000
 
 # Kirkwood Boot Image configuration file
 KWD_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/kwbimage.cfg

board/Marvell/openrd_base/config.mk

@@ -27,7 +27,7 @@
 # MA 02110-1301 USA
 #
 
-TEXT_BASE = 0x00600000
+CONFIG_SYS_TEXT_BASE = 0x00600000
 
 # Kirkwood Boot Image configuration file
 KWD_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/kwbimage.cfg

board/Marvell/rd6281a/config.mk

@@ -22,7 +22,7 @@
 # MA 02110-1301 USA
 #
 
-TEXT_BASE = 0x00600000
+CONFIG_SYS_TEXT_BASE = 0x00600000
 
 # Kirkwood Boot Image configuration file
 KWD_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/kwbimage.cfg

board/Marvell/sheevaplug/config.mk

@@ -22,7 +22,7 @@
 # MA 02110-1301 USA
 #
 
-TEXT_BASE = 0x00600000
+CONFIG_SYS_TEXT_BASE = 0x00600000
 
 # Kirkwood Boot Image configuration file
 KWD_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/kwbimage.cfg

board/RPXClassic/config.mk

@@ -26,4 +26,4 @@
 # MA 02111-1307 USA
 #
 
-TEXT_BASE = 0xff000000
+CONFIG_SYS_TEXT_BASE = 0xff000000

board/RPXlite/config.mk

@@ -25,4 +25,4 @@
 # RPXlite boards
 #
 
-TEXT_BASE = 0xfff00000
+CONFIG_SYS_TEXT_BASE = 0xfff00000

board/RPXlite_dw/config.mk

@@ -26,4 +26,4 @@
 # RPXlite dw boards : lite_dw
 #
 
-TEXT_BASE = 0xff000000
+CONFIG_SYS_TEXT_BASE = 0xff000000

board/RRvision/config.mk

@@ -25,4 +25,4 @@
 # RedRock vision boards
 #
 
-TEXT_BASE = 0x40000000
+CONFIG_SYS_TEXT_BASE = 0x40000000

board/a3000/config.mk

@@ -25,6 +25,6 @@
 # Artis A-3000 boards
 #
 
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
 
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)

board/actux1/config.mk

@@ -1,4 +1,4 @@
-TEXT_BASE = 0x00e00000
+CONFIG_SYS_TEXT_BASE = 0x00e00000
 
 # include NPE ethernet driver
 BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.a

board/actux2/config.mk

@@ -1,4 +1,4 @@
-TEXT_BASE = 0x00e00000
+CONFIG_SYS_TEXT_BASE = 0x00e00000
 
 # include NPE ethernet driver
 BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.a

board/actux3/config.mk

@@ -1,4 +1,4 @@
-TEXT_BASE = 0x00e00000
+CONFIG_SYS_TEXT_BASE = 0x00e00000
 
 # include NPE ethernet driver
 BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.a

board/actux4/config.mk

@@ -1,4 +1,4 @@
-TEXT_BASE = 0x00e00000
+CONFIG_SYS_TEXT_BASE = 0x00e00000
 
 # include NPE ethernet driver
 BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.a

board/adder/config.mk

@@ -24,4 +24,4 @@
 #
 # Analogue&Micro Adder boards family
 #
-TEXT_BASE = 0xFE000000
+CONFIG_SYS_TEXT_BASE = 0xFE000000

board/afeb9260/config.mk

@@ -1 +1 @@
-TEXT_BASE = 0x21f00000
+CONFIG_SYS_TEXT_BASE = 0x21f00000

board/alaska/config.mk

@@ -25,7 +25,8 @@
 # alaska board
 #
 
-TEXT_BASE = 0xfff00000
+CONFIG_SYS_TEXT_BASE = 0xfff00000
-# TEXT_BASE = 0x00100000
+# CONFIG_SYS_TEXT_BASE = 0x00100000
 
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+	-I$(TOPDIR)/board

board/altera/nios2-generic/config.mk

@@ -22,7 +22,7 @@
 #
 
 # we get text_base from board config header, so do not use this
-#TEXT_BASE = do-not-use-me
+#CONFIG_SYS_TEXT_BASE = do-not-use-me
 
 PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul
 PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include

board/amcc/acadia/config.mk

@@ -27,8 +27,8 @@
 
 sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
 
-ifndef TEXT_BASE
+ifndef CONFIG_SYS_TEXT_BASE
-TEXT_BASE = 0xFFF80000
+CONFIG_SYS_TEXT_BASE = 0xFFF80000
 endif
 
 ifeq ($(debug),1)

board/amcc/bamboo/config.mk

@@ -23,8 +23,8 @@
 
 sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
 
-ifndef TEXT_BASE
+ifndef CONFIG_SYS_TEXT_BASE
-TEXT_BASE = 0xFFFA0000
+CONFIG_SYS_TEXT_BASE = 0xFFFA0000
 endif
 
 PLATFORM_CPPFLAGS += -DCONFIG_440=1

board/amcc/bluestone/config.mk

@@ -25,8 +25,8 @@
 
 sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
 
-ifndef TEXT_BASE
+ifndef CONFIG_SYS_TEXT_BASE
-TEXT_BASE = 0xFFFA0000
+CONFIG_SYS_TEXT_BASE = 0xFFFA0000
 endif
 
 PLATFORM_CPPFLAGS += -DCONFIG_440=1

board/amcc/bubinga/config.mk

@@ -21,4 +21,4 @@
 # MA 02111-1307 USA
 #
 
-TEXT_BASE = 0xFFFC0000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000

board/amcc/canyonlands/config.mk

@@ -26,8 +26,8 @@
 
 sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
 
-ifndef TEXT_BASE
+ifndef CONFIG_SYS_TEXT_BASE
-TEXT_BASE = 0xFFF80000
+CONFIG_SYS_TEXT_BASE = 0xFFF80000
 endif
 
 PLATFORM_CPPFLAGS += -DCONFIG_440=1

board/amcc/ebony/config.mk

@@ -25,12 +25,12 @@
 # esd ADCIOP boards
 #
 
-#TEXT_BASE = 0xFFFE0000
+#CONFIG_SYS_TEXT_BASE = 0xFFFE0000
 
 ifeq ($(ramsym),1)
-TEXT_BASE = 0x07FD0000
+CONFIG_SYS_TEXT_BASE = 0x07FD0000
 else
-TEXT_BASE = 0xFFFC0000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000
 endif
 
 PLATFORM_CPPFLAGS += -DCONFIG_440=1

board/amcc/katmai/config.mk

@@ -25,7 +25,7 @@
 # AMCC 440SPe Evaluation (Katmai) board
 #
 
-TEXT_BASE = 0xFFFA0000
+CONFIG_SYS_TEXT_BASE = 0xFFFA0000
 
 PLATFORM_CPPFLAGS += -DCONFIG_440=1
 

board/amcc/kilauea/config.mk

@@ -23,8 +23,8 @@
 
 sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
 
-ifndef TEXT_BASE
+ifndef CONFIG_SYS_TEXT_BASE
-TEXT_BASE = 0xFFFA0000
+CONFIG_SYS_TEXT_BASE = 0xFFFA0000
 endif
 
 ifeq ($(debug),1)

board/amcc/luan/config.mk

@@ -25,12 +25,12 @@
 # esd ADCIOP boards
 #
 
-#TEXT_BASE = 0x00001000
+#CONFIG_SYS_TEXT_BASE = 0x00001000
 
 ifeq ($(ramsym),1)
-TEXT_BASE = 0xFBD00000
+CONFIG_SYS_TEXT_BASE = 0xFBD00000
 else
-TEXT_BASE = 0xFFFB0000
+CONFIG_SYS_TEXT_BASE = 0xFFFB0000
 endif
 
 PLATFORM_CPPFLAGS += -DCONFIG_440=1

board/amcc/makalu/config.mk

@@ -21,4 +21,4 @@
 # MA 02111-1307 USA
 #
 
-TEXT_BASE = 0xFFFA0000
+CONFIG_SYS_TEXT_BASE = 0xFFFA0000

board/amcc/ocotea/config.mk

@@ -25,12 +25,12 @@
 # AMCC 440GX Reference Platform (Ocotea) board
 #
 
-#TEXT_BASE = 0xFFFE0000
+#CONFIG_SYS_TEXT_BASE = 0xFFFE0000
 
 ifeq ($(ramsym),1)
-TEXT_BASE = 0x07FD0000
+CONFIG_SYS_TEXT_BASE = 0x07FD0000
 else
-TEXT_BASE = 0xFFFC0000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000
 endif
 
 PLATFORM_CPPFLAGS += -DCONFIG_440=1

board/amcc/redwood/config.mk

@@ -26,9 +26,9 @@
 #
 
 ifeq ($(ramsym),1)
-TEXT_BASE = 0x07FD0000
+CONFIG_SYS_TEXT_BASE = 0x07FD0000
 else
-TEXT_BASE = 0xfffb0000
+CONFIG_SYS_TEXT_BASE = 0xfffb0000
 endif
 
 PLATFORM_CPPFLAGS += -DCONFIG_440=1

board/amcc/sequoia/config.mk

@@ -26,8 +26,8 @@
 
 sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
 
-ifndef TEXT_BASE
+ifndef CONFIG_SYS_TEXT_BASE
-TEXT_BASE = 0xFFF80000
+CONFIG_SYS_TEXT_BASE = 0xFFF80000
 endif
 
 PLATFORM_CPPFLAGS += -DCONFIG_440=1

board/amcc/taihu/config.mk

@@ -21,4 +21,4 @@
 # MA 02111-1307 USA
 #
 
-TEXT_BASE = 0xFFFC0000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000

board/amcc/taishan/config.mk

@@ -25,12 +25,12 @@
 # AMCC 440GX Reference Platform (Taishan) board
 #
 
-#TEXT_BASE = 0xFFFE0000
+#CONFIG_SYS_TEXT_BASE = 0xFFFE0000
 
 ifeq ($(ramsym),1)
-TEXT_BASE = 0x07FD0000
+CONFIG_SYS_TEXT_BASE = 0x07FD0000
 else
-TEXT_BASE = 0xFFFC0000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000
 endif
 
 PLATFORM_CPPFLAGS += -DCONFIG_440=1

board/amcc/walnut/config.mk

@@ -21,4 +21,4 @@
 # MA 02111-1307 USA
 #
 
-TEXT_BASE = 0xFFFC0000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000

board/amcc/yosemite/config.mk

@@ -25,12 +25,12 @@
 # esd ADCIOP boards
 #
 
-#TEXT_BASE = 0x00001000
+#CONFIG_SYS_TEXT_BASE = 0x00001000
 
 ifeq ($(ramsym),1)
-TEXT_BASE = 0xFBD00000
+CONFIG_SYS_TEXT_BASE = 0xFBD00000
 else
-TEXT_BASE = 0xFFF80000
+CONFIG_SYS_TEXT_BASE = 0xFFF80000
 endif
 
 PLATFORM_CPPFLAGS += -DCONFIG_440=1

board/amcc/yucca/config.mk

@@ -26,9 +26,9 @@
 #
 
 ifeq ($(ramsym),1)
-TEXT_BASE = 0x07FD0000
+CONFIG_SYS_TEXT_BASE = 0x07FD0000
 else
-TEXT_BASE = 0xfffb0000
+CONFIG_SYS_TEXT_BASE = 0xfffb0000
 endif
 
 PLATFORM_CPPFLAGS += -DCONFIG_440=1

board/amirix/ap1000/config.mk

@@ -24,7 +24,7 @@
 # Start at bottom of RAM, but at an aliased address so that it looks
 # like it's not in RAM.  This is a bit of voodoo to allow it to be
 # run from RAM instead of Flash.
-TEXT_BASE = 0x08000000
+CONFIG_SYS_TEXT_BASE = 0x08000000
 
 # Use board specific linker script
 LDSCRIPT := $(SRCTREE)/board/amirix/ap1000/u-boot.lds

board/apollon/config.mk

@@ -13,13 +13,13 @@
 # Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
 # (mem base + reserved)
 # For use with external or internal boots.
-TEXT_BASE = 0x83e80000
+CONFIG_SYS_TEXT_BASE = 0x83e80000
 
 # Used with full SRAM boot.
 # This is either with a GP system or a signed boot image.
 # easiest, and safest way to go if you can.
-#TEXT_BASE = 0x40270000
+#CONFIG_SYS_TEXT_BASE = 0x40270000
 
 # Handy to get symbols to debug ROM version.
-#TEXT_BASE = 0x0
+#CONFIG_SYS_TEXT_BASE = 0x0
-#TEXT_BASE = 0x08000000
+#CONFIG_SYS_TEXT_BASE = 0x08000000

board/apollon/lowlevel_init.S

@@ -46,7 +46,7 @@
 #define SDRAM_BASE_ADDRESS	0x80008000
 
 _TEXT_BASE:
-	.word	TEXT_BASE	/* sdram load addr from config.mk */
+	.word	CONFIG_SYS_TEXT_BASE	/* sdram load addr from config.mk */
 
 .globl lowlevel_init
 lowlevel_init:

board/armadillo/config.mk

@@ -26,4 +26,4 @@
 #
 
 #address where u-boot will be relocated
-TEXT_BASE = 0xc0f80000
+CONFIG_SYS_TEXT_BASE = 0xc0f80000

board/armltd/integrator/config.mk

@@ -2,4 +2,4 @@
 # image should be loaded at 0x01000000
 #
 
-TEXT_BASE = 0x01000000
+CONFIG_SYS_TEXT_BASE = 0x01000000

board/armltd/versatile/config.mk

@@ -2,4 +2,4 @@
 # image should be loaded at 0x01000000
 #
 
-TEXT_BASE = 0x01000000
+CONFIG_SYS_TEXT_BASE = 0x01000000

board/assabet/config.mk

@@ -4,4 +4,4 @@
 # The Intel Assabet 1 bank of 32 MiB SDRAM
 #
 
-TEXT_BASE = 0xc1f00000
+CONFIG_SYS_TEXT_BASE = 0xc1f00000

board/astro/mcf5373l/config.mk

@@ -22,6 +22,4 @@
 # MA 02111-1307 USA
 #
 
-TEXT_BASE = $(CONFIG_TEXT_BASE)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
-
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)

board/atc/config.mk

@@ -30,9 +30,10 @@
 # in RAM where U-Boot is loaded at for debugging.
 #
 
-TEXT_BASE := 0xFF000000
+CONFIG_SYS_TEXT_BASE := 0xFF000000
 
 # RAM version
-#TEXT_BASE := 0x100000
+#CONFIG_SYS_TEXT_BASE := 0x100000
 
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+	-I$(TOPDIR)

board/atmel/at91cap9adk/config.mk

@@ -1 +1 @@
-TEXT_BASE = 0x73000000
+CONFIG_SYS_TEXT_BASE = 0x73000000

board/atmel/at91rm9200dk/config.mk

@@ -1 +1 @@
-TEXT_BASE = 0x21f00000
+CONFIG_SYS_TEXT_BASE = 0x21f00000

board/atmel/at91rm9200ek/config.mk

@@ -1 +1 @@
-TEXT_BASE = 0x21f00000
+CONFIG_SYS_TEXT_BASE = 0x21f00000

board/atmel/at91sam9260ek/config.mk

@@ -1 +1 @@
-TEXT_BASE = 0x23f00000
+CONFIG_SYS_TEXT_BASE = 0x23f00000

board/atmel/at91sam9261ek/config.mk

@@ -1 +1 @@
-TEXT_BASE = 0x23f00000
+CONFIG_SYS_TEXT_BASE = 0x23f00000

board/atmel/at91sam9263ek/config.mk

@@ -1 +1 @@
-TEXT_BASE = 0x23f00000
+CONFIG_SYS_TEXT_BASE = 0x23f00000

board/atmel/at91sam9m10g45ek/config.mk

@@ -1 +1 @@
-TEXT_BASE = 0x73f00000
+CONFIG_SYS_TEXT_BASE = 0x73f00000

board/atmel/at91sam9rlek/config.mk

@@ -1 +1 @@
-TEXT_BASE = 0x23f00000
+CONFIG_SYS_TEXT_BASE = 0x23f00000

board/atmel/atngw100/config.mk

@@ -1,3 +1,3 @@
-TEXT_BASE		= 0x00000000
+CONFIG_SYS_TEXT_BASE		= 0x00000000
 PLATFORM_RELFLAGS	+= -ffunction-sections -fdata-sections
 PLATFORM_LDFLAGS	+= --gc-sections