Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> Signed-off by: John Rigby <jrigby@freescale.com>master
TsiChungLiew
17 years ago
parent
397b7b81a1
commit
1552af70ec
@ -0,0 +1,44 @@ |
||||
#
|
||||
# (C) Copyright 2000-2003
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
# MA 02111-1307 USA
|
||||
#
|
||||
|
||||
include $(TOPDIR)/config.mk |
||||
|
||||
LIB = $(obj)lib$(BOARD).a
|
||||
|
||||
COBJS = $(BOARD).o
|
||||
|
||||
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(COBJS))
|
||||
SOBJS := $(addprefix $(obj),$(SOBJS))
|
||||
|
||||
$(LIB): $(obj).depend $(OBJS) |
||||
$(AR) $(ARFLAGS) $@ $(OBJS)
|
||||
|
||||
#########################################################################
|
||||
|
||||
# defines $(obj).depend target
|
||||
include $(SRCTREE)/rules.mk |
||||
|
||||
sinclude $(obj).depend |
||||
|
||||
#########################################################################
|
||||
@ -0,0 +1,25 @@ |
||||
#
|
||||
# (C) Copyright 2000-2003
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
# MA 02111-1307 USA
|
||||
#
|
||||
|
||||
TEXT_BASE = 0
|
||||
@ -0,0 +1,86 @@ |
||||
/*
|
||||
* (C) Copyright 2000-2003 |
||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
||||
* |
||||
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc. |
||||
* TsiChung Liew (Tsi-Chung.Liew@freescale.com) |
||||
* |
||||
* See file CREDITS for list of people who contributed to this |
||||
* project. |
||||
* |
||||
* This program is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of |
||||
* the License, or (at your option) any later version. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* You should have received a copy of the GNU General Public License |
||||
* along with this program; if not, write to the Free Software |
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
||||
* MA 02111-1307 USA |
||||
*/ |
||||
|
||||
#include <common.h> |
||||
#include <asm/immap.h> |
||||
|
||||
DECLARE_GLOBAL_DATA_PTR; |
||||
|
||||
int checkboard(void) |
||||
{ |
||||
puts("Board: "); |
||||
puts("Freescale M52277 EVB\n"); |
||||
return 0; |
||||
}; |
||||
|
||||
long int initdram(int board_type) |
||||
{ |
||||
volatile sdramc_t *sdram = (volatile sdramc_t *)(MMAP_SDRAM); |
||||
u32 dramsize, i; |
||||
|
||||
dramsize = CFG_SDRAM_SIZE * 0x100000; |
||||
|
||||
for (i = 0x13; i < 0x20; i++) { |
||||
if (dramsize == (1 << i)) |
||||
break; |
||||
} |
||||
i--; |
||||
|
||||
sdram->sdcs0 = (CFG_SDRAM_BASE | i); |
||||
|
||||
sdram->sdcfg1 = CFG_SDRAM_CFG1; |
||||
sdram->sdcfg2 = CFG_SDRAM_CFG2; |
||||
|
||||
/* Issue PALL */ |
||||
sdram->sdcr = CFG_SDRAM_CTRL | 2; |
||||
|
||||
/* Issue LEMR */ |
||||
/*sdram->sdmr = CFG_SDRAM_EMOD; */ |
||||
sdram->sdmr = CFG_SDRAM_MODE; |
||||
|
||||
udelay(1000); |
||||
|
||||
/* Issue PALL */ |
||||
sdram->sdcr = CFG_SDRAM_CTRL | 2; |
||||
|
||||
/* Perform two refresh cycles */ |
||||
sdram->sdcr = CFG_SDRAM_CTRL | 4; |
||||
sdram->sdcr = CFG_SDRAM_CTRL | 4; |
||||
|
||||
sdram->sdcr = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000c00; |
||||
|
||||
udelay(100); |
||||
|
||||
return (dramsize); |
||||
}; |
||||
|
||||
int testdram(void) |
||||
{ |
||||
/* TODO: XXX XXX XXX */ |
||||
printf("DRAM test not implemented!\n"); |
||||
|
||||
return (0); |
||||
} |
||||
@ -0,0 +1,145 @@ |
||||
/* |
||||
* (C) Copyright 2000 |
||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
||||
* |
||||
* See file CREDITS for list of people who contributed to this |
||||
* project. |
||||
* |
||||
* This program is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of |
||||
* the License, or (at your option) any later version. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* You should have received a copy of the GNU General Public License |
||||
* along with this program; if not, write to the Free Software |
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
||||
* MA 02111-1307 USA |
||||
*/ |
||||
|
||||
OUTPUT_ARCH(m68k) |
||||
SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); |
||||
/* Do we need any of these for elf? |
||||
__DYNAMIC = 0; */ |
||||
SECTIONS |
||||
{ |
||||
/* Read-only sections, merged into text segment: */ |
||||
. = + SIZEOF_HEADERS; |
||||
.interp : { *(.interp) } |
||||
.hash : { *(.hash) } |
||||
.dynsym : { *(.dynsym) } |
||||
.dynstr : { *(.dynstr) } |
||||
.rel.text : { *(.rel.text) } |
||||
.rela.text : { *(.rela.text) } |
||||
.rel.data : { *(.rel.data) } |
||||
.rela.data : { *(.rela.data) } |
||||
.rel.rodata : { *(.rel.rodata) } |
||||
.rela.rodata : { *(.rela.rodata) } |
||||
.rel.got : { *(.rel.got) } |
||||
.rela.got : { *(.rela.got) } |
||||
.rel.ctors : { *(.rel.ctors) } |
||||
.rela.ctors : { *(.rela.ctors) } |
||||
.rel.dtors : { *(.rel.dtors) } |
||||
.rela.dtors : { *(.rela.dtors) } |
||||
.rel.bss : { *(.rel.bss) } |
||||
.rela.bss : { *(.rela.bss) } |
||||
.rel.plt : { *(.rel.plt) } |
||||
.rela.plt : { *(.rela.plt) } |
||||
.init : { *(.init) } |
||||
.plt : { *(.plt) } |
||||
.text : |
||||
{ |
||||
/* WARNING - the following is hand-optimized to fit within */ |
||||
/* the sector layout of our flash chips! XXX FIXME XXX */ |
||||
|
||||
cpu/mcf5227x/start.o (.text) |
||||
cpu/mcf5227x/libmcf5227x.a (.text) |
||||
lib_m68k/libm68k.a (.text) |
||||
lib_generic/libgeneric.a (.text) |
||||
common/cmd_mem.o (.text) |
||||
common/main.o (.text) |
||||
|
||||
. = DEFINED(env_offset) ? env_offset : .; |
||||
common/environment.o (.text) |
||||
|
||||
*(.text) |
||||
*(.fixup) |
||||
*(.got1) |
||||
} |
||||
_etext = .; |
||||
PROVIDE (etext = .); |
||||
.rodata : |
||||
{ |
||||
*(.rodata) |
||||
*(.rodata1) |
||||
} |
||||
.fini : { *(.fini) } =0 |
||||
.ctors : { *(.ctors) } |
||||
.dtors : { *(.dtors) } |
||||
|
||||
/* Read-write section, merged into data segment: */ |
||||
. = (. + 0x00FF) & 0xFFFFFF00; |
||||
_erotext = .; |
||||
PROVIDE (erotext = .); |
||||
|
||||
.reloc : |
||||
{ |
||||
__got_start = .; |
||||
*(.got) |
||||
__got_end = .; |
||||
_GOT2_TABLE_ = .; |
||||
*(.got2) |
||||
_FIXUP_TABLE_ = .; |
||||
*(.fixup) |
||||
} |
||||
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; |
||||
__fixup_entries = (. - _FIXUP_TABLE_)>>2; |
||||
|
||||
.data : |
||||
{ |
||||
*(.data) |
||||
*(.data1) |
||||
*(.sdata) |
||||
*(.sdata2) |
||||
*(.dynamic) |
||||
CONSTRUCTORS |
||||
} |
||||
_edata = .; |
||||
PROVIDE (edata = .); |
||||
|
||||
. = .; |
||||
__u_boot_cmd_start = .; |
||||
.u_boot_cmd : { *(.u_boot_cmd) } |
||||
__u_boot_cmd_end = .; |
||||
|
||||
|
||||
. = .; |
||||
__start___ex_table = .; |
||||
__ex_table : { *(__ex_table) } |
||||
__stop___ex_table = .; |
||||
|
||||
. = ALIGN(256); |
||||
__init_begin = .; |
||||
.text.init : { *(.text.init) } |
||||
.data.init : { *(.data.init) } |
||||
. = ALIGN(256); |
||||
__init_end = .; |
||||
|
||||
__bss_start = .; |
||||
.bss : |
||||
{ |
||||
_sbss = .; |
||||
*(.sbss) *(.scommon) |
||||
*(.dynbss) |
||||
*(.bss) |
||||
*(COMMON) |
||||
. = ALIGN(4); |
||||
_ebss = .; |
||||
} |
||||
_end = . ; |
||||
PROVIDE (end = .); |
||||
} |
||||
@ -0,0 +1,237 @@ |
||||
Freescale MCF52277EVB ColdFire Development Board |
||||
================================================ |
||||
|
||||
TsiChung Liew(Tsi-Chung.Liew@freescale.com) |
||||
Created Jan 8, 2008 |
||||
=========================================== |
||||
|
||||
|
||||
Changed files: |
||||
============== |
||||
|
||||
- board/freescale/m52277evb/m52277evb.c Dram setup |
||||
- board/freescale/m52277evb/Makefile Makefile |
||||
- board/freescale/m52277evb/config.mk config make |
||||
- board/freescale/m52277evb/u-boot.lds Linker description |
||||
|
||||
- cpu/mcf5227x/cpu.c cpu specific code |
||||
- cpu/mcf5227x/cpu_init.c FBCS, Mux pins, icache and RTC extra regs |
||||
- cpu/mcf5227x/interrupts.c cpu specific interrupt support |
||||
- cpu/mcf5227x/speed.c system, flexbus, and cpu clock |
||||
- cpu/mcf5227x/Makefile Makefile |
||||
- cpu/mcf5227x/config.mk config make |
||||
- cpu/mcf5227x/start.S start up assembly code |
||||
|
||||
- doc/README.m52277evb This readme file |
||||
|
||||
- drivers/serial/mcfuart.c ColdFire common UART driver |
||||
- drivers/rtc/mcfrtc.c Realtime clock Driver |
||||
|
||||
- include/asm-m68k/bitops.h Bit operation function export |
||||
- include/asm-m68k/byteorder.h Byte order functions |
||||
- include/asm-m68k/crossbar.h CrossBar structure and definition |
||||
- include/asm-m68k/dspi.h DSPI structure and definition |
||||
- include/asm-m68k/edma.h eDMA structure and definition |
||||
- include/asm-m68k/flexbus.h FlexBus structure and definition |
||||
- include/asm-m68k/fsl_i2c.h I2C structure and definition |
||||
- include/asm-m68k/global_data.h Global data structure |
||||
- include/asm-m68k/immap.h ColdFire specific header file and driver macros |
||||
- include/asm-m68k/immap_5227x.h mcf5227x specific header file |
||||
- include/asm-m68k/io.h io functions |
||||
- include/asm-m68k/lcd.h LCD structure and definition |
||||
- include/asm-m68k/m5227x.h mcf5227x specific header file |
||||
- include/asm-m68k/posix_types.h Posix |
||||
- include/asm-m68k/processor.h header file |
||||
- include/asm-m68k/ptrace.h Exception structure |
||||
- include/asm-m68k/rtc.h Realtime clock header file |
||||
- include/asm-m68k/ssi.h SSI structure and definition |
||||
- include/asm-m68k/string.h String function export |
||||
- include/asm-m68k/timer.h Timer structure and definition |
||||
- include/asm-m68k/types.h Data types definition |
||||
- include/asm-m68k/uart.h Uart structure and definition |
||||
- include/asm-m68k/u-boot.h u-boot structure |
||||
|
||||
- include/configs/M52277EVB.h Board specific configuration file |
||||
|
||||
- lib_m68k/board.c board init function |
||||
- lib_m68k/cache.c |
||||
- lib_m68k/interrupts Coldfire common interrupt functions |
||||
- lib_m68k/m68k_linux.c |
||||
- lib_m68k/time.c Timer functions (Dma timer and PIT) |
||||
- lib_m68k/traps.c Exception init code |
||||
|
||||
1 MCF52277 specific Options/Settings |
||||
==================================== |
||||
1.1 pre-loader is no longer suppoer in this coldfire family |
||||
|
||||
1.2 Configuration settings for M52277EVB Development Board |
||||
CONFIG_MCF5227x -- define for all MCF5227x CPUs |
||||
CONFIG_M52277 -- define for all Freescale MCF52277 CPUs |
||||
CONFIG_M52277EVB -- define for M52277EVB board |
||||
|
||||
CONFIG_MCFUART -- define to use common CF Uart driver |
||||
CFG_UART_PORT -- define UART port number, start with 0, 1 and 2 |
||||
CONFIG_BAUDRATE -- define UART baudrate |
||||
|
||||
CONFIG_MCFRTC -- define to use common CF RTC driver |
||||
CFG_MCFRTC_BASE -- provide base address for RTC in immap.h |
||||
CFG_RTC_OSCILLATOR -- define RTC clock frequency |
||||
RTC_DEBUG -- define to show RTC debug message |
||||
CONFIG_CMD_DATE -- enable to use date feature in u-boot |
||||
|
||||
CONFIG_MCFTMR -- define to use DMA timer |
||||
CONFIG_MCFPIT -- define to use PIT timer |
||||
|
||||
CONFIG_FSL_I2C -- define to use FSL common I2C driver |
||||
CONFIG_HARD_I2C -- define for I2C hardware support |
||||
CONFIG_SOFT_I2C -- define for I2C bit-banged |
||||
CFG_I2C_SPEED -- define for I2C speed |
||||
CFG_I2C_SLAVE -- define for I2C slave address |
||||
CFG_I2C_OFFSET -- define for I2C base address offset |
||||
CFG_IMMR -- define for MBAR offset |
||||
|
||||
CFG_MBAR -- define MBAR offset |
||||
|
||||
CONFIG_MONITOR_IS_IN_RAM -- Not support |
||||
|
||||
CFG_INIT_RAM_ADDR -- defines the base address of the MCF52277 internal SRAM |
||||
|
||||
CFG_CSn_BASE -- defines the Chip Select Base register |
||||
CFG_CSn_MASK -- defines the Chip Select Mask register |
||||
CFG_CSn_CTRL -- defines the Chip Select Control register |
||||
|
||||
CFG_SDRAM_BASE -- defines the DRAM Base |
||||
|
||||
CONFIG_LCD and CONFIG_CMD_USB are not supported in this current u-boot, |
||||
update will be provided at later time |
||||
|
||||
2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL |
||||
=========================================== |
||||
2.1. System memory map: |
||||
Flash: 0x00000000-0x3FFFFFFF (1024MB) |
||||
DDR: 0x40000000-0x7FFFFFFF (1024MB) |
||||
SRAM: 0x80000000-0x8FFFFFFF (256MB) |
||||
IP: 0xF0000000-0xFFFFFFFF (256MB) |
||||
|
||||
2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and |
||||
linux kernel, you can customize it based on your system requirements: |
||||
Flash0: 0x00000000-0x00FFFFFF (16MB) |
||||
|
||||
DDR: 0x40000000-0x4FFFFFFF (64MB) |
||||
SRAM: 0x80000000-0x80007FFF (32KB) |
||||
IP: 0xFC000000-0xFC0FFFFF (64KB) |
||||
|
||||
3. COMPILATION |
||||
============== |
||||
3.1 To create U-Boot the gcc-4.1-xx compiler set (ColdFire ELF or |
||||
uClinux version) from codesourcery.com was used. Download it from: |
||||
http://www.codesourcery.com/gnu_toolchains/coldfire/download.html |
||||
|
||||
3.2 Compilation |
||||
export CROSS_COMPILE=cross-compile-prefix |
||||
cd u-boot-1.x.x |
||||
make distclean |
||||
make M52277EVB_config |
||||
make |
||||
|
||||
4. SCREEN DUMP |
||||
============== |
||||
4.1 M52277EVB Development board |
||||
(NOTE: May not show exactly the same) |
||||
|
||||
U-Boot 1.3.1 (Jan 8 2008 - 12:44:08) |
||||
|
||||
CPU: Freescale MCF52277 (Mask:6c Version:0) |
||||
CPU CLK 160 Mhz BUS CLK 80 Mhz FLB CLK 80 MHZ |
||||
INP CLK 16 Mhz VCO CLK 480 Mhz |
||||
Board: Freescale 52277 EVB |
||||
I2C: ready |
||||
DRAM: 64 MB |
||||
FLASH: 16 MB |
||||
In: serial |
||||
Out: serial |
||||
Err: serial |
||||
-> print |
||||
baudrate=115200 |
||||
hostname=M52277EVB |
||||
inpclk=16000000 |
||||
loadaddr=(0x40000000 + 0x10000) |
||||
load=tftp ${loadaddr) ${u-boot} |
||||
upd=run load; run prog |
||||
prog=prot off 0 3ffff;era 0 3ffff;cp.b ${loadaddr} 0 ${filesize};save |
||||
u-boot=u-boot.bin |
||||
stdin=serial |
||||
stdout=serial |
||||
stderr=serial |
||||
mem=65024k |
||||
|
||||
Environment size: 280/32764 bytes |
||||
-> bdinfo |
||||
memstart = 0x40000000 |
||||
memsize = 0x04000000 |
||||
flashstart = 0x00000000 |
||||
flashsize = 0x01000000 |
||||
flashoffset = 0x00000000 |
||||
sramstart = 0x80000000 |
||||
sramsize = 0x00008000 |
||||
mbar = 0xFC000000 |
||||
busfreq = 80 MHz |
||||
flbfreq = 80 Mhz |
||||
inpfreq = 16 Mhz |
||||
vcofreq = 480 Mhz |
||||
|
||||
baudrate = 115200 bps |
||||
-> |
||||
-> help |
||||
? - alias for 'help' |
||||
autoscr - run script from memory |
||||
base - print or set address offset |
||||
bdinfo - print Board Info structure |
||||
boot - boot default, i.e., run 'bootcmd' |
||||
bootd - boot default, i.e., run 'bootcmd' |
||||
bootelf - Boot from an ELF image in memory |
||||
bootm - boot application image from memory |
||||
bootp - boot image via network using BootP/TFTP protocol |
||||
bootvx - Boot vxWorks from an ELF image |
||||
cmp - memory compare |
||||
coninfo - print console devices and information |
||||
cp - memory copy |
||||
crc32 - checksum calculation |
||||
date - get/set/reset date & time |
||||
dcache - enable or disable data cache |
||||
echo - echo args to console |
||||
erase - erase FLASH memory |
||||
flinfo - print FLASH memory information |
||||
go - start application at address 'addr' |
||||
help - print online help |
||||
icache - enable or disable instruction cache |
||||
icrc32 - checksum calculation |
||||
iloop - infinite loop on address range |
||||
imd - i2c memory display |
||||
iminfo - print header information for application image |
||||
imls - list all images found in flash |
||||
imm - i2c memory modify (auto-incrementing) |
||||
imw - memory write (fill) |
||||
inm - memory modify (constant address) |
||||
iprobe - probe to discover valid I2C chip addresses |
||||
itest - return true/false on integer compare |
||||
loadb - load binary file over serial line (kermit mode) |
||||
loads - load S-Record file over serial line |
||||
loady - load binary file over serial line (ymodem mode) |
||||
loop - infinite loop on address range |
||||
ls - list files in a directory (default /) |
||||
md - memory display |
||||
mm - memory modify (auto-incrementing) |
||||
mtest - simple RAM test |
||||
mw - memory write (fill) |
||||
nm - memory modify (constant address) |
||||
ping - send ICMP ECHO_REQUEST to network host |
||||
printenv- print environment variables |
||||
protect - enable or disable FLASH write protection |
||||
reset - Perform RESET of the CPU |
||||
run - run commands in an environment variable |
||||
saveenv - save environment variables to persistent storage |
||||
setenv - set environment variables |
||||
sleep - delay execution for some time |
||||
version - print monitor version |
||||
-> |
||||
@ -0,0 +1,251 @@ |
||||
/*
|
||||
* Configuation settings for the Freescale MCF52277 EVB board. |
||||
* |
||||
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc. |
||||
* TsiChung Liew (Tsi-Chung.Liew@freescale.com) |
||||
* |
||||
* See file CREDITS for list of people who contributed to this |
||||
* project. |
||||
* |
||||
* This program is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of |
||||
* the License, or (at your option) any later version. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* You should have received a copy of the GNU General Public License |
||||
* along with this program; if not, write to the Free Software |
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
||||
* MA 02111-1307 USA |
||||
*/ |
||||
|
||||
/*
|
||||
* board/config.h - configuration options, board specific |
||||
*/ |
||||
|
||||
#ifndef _M52277EVB_H |
||||
#define _M52277EVB_H |
||||
|
||||
/*
|
||||
* High Level Configuration Options |
||||
* (easy to change) |
||||
*/ |
||||
#define CONFIG_MCF5227x /* define processor family */ |
||||
#define CONFIG_M52277 /* define processor type */ |
||||
#define CONFIG_M52277EVB /* M52277EVB board */ |
||||
|
||||
#undef DEBUG |
||||
|
||||
#define CONFIG_MCFUART |
||||
#define CFG_UART_PORT (0) |
||||
#define CONFIG_BAUDRATE 115200 |
||||
#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } |
||||
|
||||
#undef CONFIG_WATCHDOG |
||||
|
||||
#define CONFIG_TIMESTAMP /* Print image info with timestamp */ |
||||
|
||||
/*
|
||||
* BOOTP options |
||||
*/ |
||||
#define CONFIG_BOOTP_BOOTFILESIZE |
||||
#define CONFIG_BOOTP_BOOTPATH |
||||
#define CONFIG_BOOTP_GATEWAY |
||||
#define CONFIG_BOOTP_HOSTNAME |
||||
|
||||
/* Command line configuration */ |
||||
#include <config_cmd_default.h> |
||||
|
||||
#define CONFIG_CMD_CACHE |
||||
#define CONFIG_CMD_DATE |
||||
#define CONFIG_CMD_ELF |
||||
#define CONFIG_CMD_FLASH |
||||
#define CONFIG_CMD_I2C |
||||
#define CONFIG_CMD_JFFS2 |
||||
#define CONFIG_CMD_LOADB |
||||
#define CONFIG_CMD_LOADS |
||||
#define CONFIG_CMD_MEMORY |
||||
#define CONFIG_CMD_MISC |
||||
#undef CONFIG_CMD_NET |
||||
#define CONFIG_CMD_REGINFO |
||||
#undef CONFIG_CMD_USB |
||||
#undef CONFIG_CMD_BMP |
||||
|
||||
#define CONFIG_HOSTNAME M52277EVB |
||||
#define CONFIG_EXTRA_ENV_SETTINGS \ |
||||
"inpclk=" MK_STR(CFG_INPUT_CLKSRC) "\0" \
|
||||
"loadaddr=" MK_STR(CFG_LOAD_ADDR) "\0" \
|
||||
"u-boot=u-boot.bin\0" \
|
||||
"load=tftp ${loadaddr) ${u-boot}\0" \
|
||||
"upd=run load; run prog\0" \
|
||||
"prog=prot off 0 0x3ffff;" \
|
||||
"era 0 3ffff;" \
|
||||
"cp.b ${loadaddr} 0 ${filesize};" \
|
||||
"save\0" \
|
||||
"" |
||||
|
||||
/* LCD */ |
||||
#ifdef CONFIG_CMD_BMP |
||||
#define CONFIG_LCD |
||||
#define CONFIG_SPLASH_SCREEN |
||||
#define CONFIG_LCD_LOGO |
||||
#define CONFIG_SHARP_LQ035Q7DH06 |
||||
#endif |
||||
|
||||
/* USB */ |
||||
#ifdef CONFIG_CMD_USB |
||||
#define CONFIG_USB_EHCI |
||||
#define CONFIG_USB_STORAGE |
||||
#define CONFIG_DOS_PARTITION |
||||
#define CONFIG_MAC_PARTITION |
||||
#define CONFIG_ISO_PARTITION |
||||
#define CFG_USB_EHCI_REGS_BASE 0xFC0B0000 |
||||
#define CFG_USB_EHCI_CPU_INIT |
||||
#endif |
||||
|
||||
/* Realtime clock */ |
||||
#define CONFIG_MCFRTC |
||||
#undef RTC_DEBUG |
||||
#define CFG_RTC_OSCILLATOR (32 * CFG_HZ) |
||||
|
||||
/* Timer */ |
||||
#define CONFIG_MCFTMR |
||||
#undef CONFIG_MCFPIT |
||||
|
||||
/* I2c */ |
||||
#define CONFIG_FSL_I2C |
||||
#define CONFIG_HARD_I2C /* I2C with hardware support */ |
||||
#undef CONFIG_SOFT_I2C /* I2C bit-banged */ |
||||
#define CFG_I2C_SPEED 80000 /* I2C speed and slave address */ |
||||
#define CFG_I2C_SLAVE 0x7F |
||||
#define CFG_I2C_OFFSET 0x58000 |
||||
#define CFG_IMMR CFG_MBAR |
||||
|
||||
/* Input, PCI, Flexbus, and VCO */ |
||||
#define CONFIG_EXTRA_CLOCK |
||||
|
||||
#define CFG_INPUT_CLKSRC 16000000 |
||||
|
||||
#define CONFIG_PRAM 512 /* 512 KB */ |
||||
|
||||
#define CFG_PROMPT "-> " |
||||
#define CFG_LONGHELP /* undef to save memory */ |
||||
|
||||
#if defined(CONFIG_CMD_KGDB) |
||||
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ |
||||
#else |
||||
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ |
||||
#endif |
||||
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ |
||||
#define CFG_MAXARGS 16 /* max number of command args */ |
||||
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ |
||||
|
||||
#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x10000) |
||||
|
||||
#define CFG_HZ 1000 |
||||
|
||||
#define CFG_MBAR 0xFC000000 |
||||
|
||||
/*
|
||||
* Low Level Configuration Settings |
||||
* (address mappings, register initial values, etc.) |
||||
* You should know what you are doing if you make changes here. |
||||
*/ |
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Definitions for initial stack pointer and data area (in DPRAM) |
||||
*/ |
||||
#define CFG_INIT_RAM_ADDR 0x80000000 |
||||
#define CFG_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */ |
||||
#define CFG_INIT_RAM_CTRL 0x21 |
||||
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ |
||||
#define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 16) |
||||
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET |
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Start addresses for the final memory configuration |
||||
* (Set up by the startup code) |
||||
* Please note that CFG_SDRAM_BASE _must_ start at 0 |
||||
*/ |
||||
#define CFG_SDRAM_BASE 0x40000000 |
||||
#define CFG_SDRAM_SIZE 64 /* SDRAM size in MB */ |
||||
#define CFG_SDRAM_CFG1 0x43711630 |
||||
#define CFG_SDRAM_CFG2 0x56670000 |
||||
#define CFG_SDRAM_CTRL 0xE1092000 |
||||
#define CFG_SDRAM_EMOD 0x81810000 |
||||
#define CFG_SDRAM_MODE 0x00CD0000 |
||||
|
||||
#define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400 |
||||
#define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20) |
||||
|
||||
#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) |
||||
#define CFG_BOOTPARAMS_LEN 64*1024 |
||||
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ |
||||
#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ |
||||
|
||||
/* Initial Memory map for Linux */ |
||||
#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) |
||||
|
||||
/* Configuration for environment
|
||||
* Environment is embedded in u-boot in the second sector of the flash |
||||
*/ |
||||
#define CFG_ENV_IS_IN_FLASH 1 |
||||
#define CONFIG_ENV_OVERWRITE 1 |
||||
#undef CFG_ENV_IS_EMBEDDED |
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* FLASH organization |
||||
*/ |
||||
#define CFG_FLASH_BASE CFG_CS0_BASE |
||||
#define CFG_FLASH0_BASE CFG_CS0_BASE |
||||
#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x8000) |
||||
#define CFG_ENV_SECT_SIZE 0x8000 |
||||
|
||||
#define CFG_FLASH_CFI |
||||
#ifdef CFG_FLASH_CFI |
||||
|
||||
# define CFG_FLASH_CFI_DRIVER 1 |
||||
# define CFG_FLASH_SIZE 0x1000000 /* Max size that the board might have */ |
||||
# define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT |
||||
# define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ |
||||
# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ |
||||
# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ |
||||
# define CFG_FLASH_CHECKSUM |
||||
#endif |
||||
|
||||
/*
|
||||
* This is setting for JFFS2 support in u-boot. |
||||
* NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. |
||||
*/ |
||||
#ifdef CONFIG_CMD_JFFS2 |
||||
# define CONFIG_JFFS2_DEV "nor0" |
||||
# define CONFIG_JFFS2_PART_SIZE (0x01000000 - 0x40000) |
||||
# define CONFIG_JFFS2_PART_OFFSET (CFG_FLASH0_BASE + 0x40000) |
||||
#endif |
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Cache Configuration |
||||
*/ |
||||
#define CFG_CACHELINE_SIZE 16 |
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Memory bank definitions |
||||
*/ |
||||
/*
|
||||
* CS0 - NOR Flash |
||||
* CS1 - Available |
||||
* CS2 - Available |
||||
* CS3 - Available |
||||
* CS4 - Available |
||||
* CS5 - Available |
||||
*/ |
||||
|
||||
#define CFG_CS0_BASE 0x00000000 |
||||
#define CFG_CS0_MASK 0x00FF0001 |
||||
#define CFG_CS0_CTRL 0x00001FA0 |
||||
|
||||
#endif /* _M52277EVB_H */ |
||||
Loading…
Reference in new issue