Add code for starting up U-Boot SPL and U-Boot proper. This is generic and makes use of devices provided by the board- or SoC-specific code. Signed-off-by: Simon Glass <sjg@chromium.org>master
parent
a8cb4fb56a
commit
2444dae587
@ -0,0 +1,41 @@ |
|||||||
|
if ARCH_ROCKCHIP |
||||||
|
|
||||||
|
config ROCKCHIP_RK3288 |
||||||
|
bool "Support Rockchip RK3288" |
||||||
|
help |
||||||
|
The Rockchip RK3288 is a ARM-based SoC with a quad-core Cortex-A17 |
||||||
|
including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two |
||||||
|
video interfaces supporting HDMI and eDP, several DDR3 options |
||||||
|
and video codec support. Peripherals include Gigabit Ethernet, |
||||||
|
USB2 host and OTG, SDIO, I2S, UART,s, SPI, I2C and PWMs. |
||||||
|
|
||||||
|
config SYS_MALLOC_F |
||||||
|
default y |
||||||
|
|
||||||
|
config SYS_MALLOC_F_LEN |
||||||
|
default 0x800 |
||||||
|
|
||||||
|
config SPL_DM |
||||||
|
default y |
||||||
|
|
||||||
|
config DM_SERIAL |
||||||
|
default y |
||||||
|
|
||||||
|
config DM_SPI |
||||||
|
default y |
||||||
|
|
||||||
|
config DM_SPI_FLASH |
||||||
|
default y |
||||||
|
|
||||||
|
config DM_I2C |
||||||
|
default y |
||||||
|
|
||||||
|
config DM_GPIO |
||||||
|
default y |
||||||
|
|
||||||
|
config ROCKCHIP_SERIAL |
||||||
|
default y |
||||||
|
|
||||||
|
source "arch/arm/mach-rockchip/rk3288/Kconfig" |
||||||
|
|
||||||
|
endif |
@ -0,0 +1,13 @@ |
|||||||
|
#
|
||||||
|
# Copyright (c) 2014 Google, Inc
|
||||||
|
#
|
||||||
|
# SPDX-License-Identifier: GPL-2.0+
|
||||||
|
#
|
||||||
|
|
||||||
|
ifdef CONFIG_SPL_BUILD |
||||||
|
obj-y += board-spl.o
|
||||||
|
else |
||||||
|
obj-y += board.o
|
||||||
|
endif |
||||||
|
obj-y += common.o
|
||||||
|
obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288/
|
@ -0,0 +1,287 @@ |
|||||||
|
/*
|
||||||
|
* (C) Copyright 2015 Google, Inc |
||||||
|
* |
||||||
|
* SPDX-License-Identifier: GPL-2.0+ |
||||||
|
*/ |
||||||
|
|
||||||
|
#include <common.h> |
||||||
|
#include <debug_uart.h> |
||||||
|
#include <dm.h> |
||||||
|
#include <fdtdec.h> |
||||||
|
#include <led.h> |
||||||
|
#include <malloc.h> |
||||||
|
#include <ram.h> |
||||||
|
#include <spl.h> |
||||||
|
#include <asm/gpio.h> |
||||||
|
#include <asm/io.h> |
||||||
|
#include <asm/arch/clock.h> |
||||||
|
#include <asm/arch/hardware.h> |
||||||
|
#include <asm/arch/periph.h> |
||||||
|
#include <asm/arch/sdram.h> |
||||||
|
#include <dm/pinctrl.h> |
||||||
|
#include <dm/root.h> |
||||||
|
#include <dm/test.h> |
||||||
|
#include <dm/util.h> |
||||||
|
#include <power/regulator.h> |
||||||
|
|
||||||
|
DECLARE_GLOBAL_DATA_PTR; |
||||||
|
|
||||||
|
u32 spl_boot_device(void) |
||||||
|
{ |
||||||
|
const void *blob = gd->fdt_blob; |
||||||
|
struct udevice *dev; |
||||||
|
const char *bootdev; |
||||||
|
int node; |
||||||
|
int ret; |
||||||
|
|
||||||
|
bootdev = fdtdec_get_config_string(blob, "u-boot,boot0"); |
||||||
|
debug("Boot device %s\n", bootdev); |
||||||
|
if (!bootdev) |
||||||
|
goto fallback; |
||||||
|
|
||||||
|
node = fdt_path_offset(blob, bootdev); |
||||||
|
if (node < 0) { |
||||||
|
debug("node=%d\n", node); |
||||||
|
goto fallback; |
||||||
|
} |
||||||
|
ret = device_get_global_by_of_offset(node, &dev); |
||||||
|
if (ret) { |
||||||
|
debug("device at node %s/%d not found: %d\n", bootdev, node, |
||||||
|
ret); |
||||||
|
goto fallback; |
||||||
|
} |
||||||
|
debug("Found device %s\n", dev->name); |
||||||
|
switch (device_get_uclass_id(dev)) { |
||||||
|
case UCLASS_SPI_FLASH: |
||||||
|
return BOOT_DEVICE_SPI; |
||||||
|
case UCLASS_MMC: |
||||||
|
return BOOT_DEVICE_MMC1; |
||||||
|
default: |
||||||
|
debug("Booting from device uclass '%s' not supported\n", |
||||||
|
dev_get_uclass_name(dev)); |
||||||
|
} |
||||||
|
|
||||||
|
fallback: |
||||||
|
return BOOT_DEVICE_MMC1; |
||||||
|
} |
||||||
|
|
||||||
|
u32 spl_boot_mode(void) |
||||||
|
{ |
||||||
|
return MMCSD_MODE_RAW; |
||||||
|
} |
||||||
|
|
||||||
|
/* read L2 control register (L2CTLR) */ |
||||||
|
static inline uint32_t read_l2ctlr(void) |
||||||
|
{ |
||||||
|
uint32_t val = 0; |
||||||
|
|
||||||
|
asm volatile ("mrc p15, 1, %0, c9, c0, 2" : "=r" (val)); |
||||||
|
|
||||||
|
return val; |
||||||
|
} |
||||||
|
|
||||||
|
/* write L2 control register (L2CTLR) */ |
||||||
|
static inline void write_l2ctlr(uint32_t val) |
||||||
|
{ |
||||||
|
/*
|
||||||
|
* Note: L2CTLR can only be written when the L2 memory system |
||||||
|
* is idle, ie before the MMU is enabled. |
||||||
|
*/ |
||||||
|
asm volatile("mcr p15, 1, %0, c9, c0, 2" : : "r" (val) : "memory"); |
||||||
|
isb(); |
||||||
|
} |
||||||
|
|
||||||
|
static void configure_l2ctlr(void) |
||||||
|
{ |
||||||
|
uint32_t l2ctlr; |
||||||
|
|
||||||
|
l2ctlr = read_l2ctlr(); |
||||||
|
l2ctlr &= 0xfffc0000; /* clear bit0~bit17 */ |
||||||
|
|
||||||
|
/*
|
||||||
|
* Data RAM write latency: 2 cycles |
||||||
|
* Data RAM read latency: 2 cycles |
||||||
|
* Data RAM setup latency: 1 cycle |
||||||
|
* Tag RAM write latency: 1 cycle |
||||||
|
* Tag RAM read latency: 1 cycle |
||||||
|
* Tag RAM setup latency: 1 cycle |
||||||
|
*/ |
||||||
|
l2ctlr |= (1 << 3 | 1 << 0); |
||||||
|
write_l2ctlr(l2ctlr); |
||||||
|
} |
||||||
|
|
||||||
|
struct rk3288_timer { |
||||||
|
u32 timer_load_count0; |
||||||
|
u32 timer_load_count1; |
||||||
|
u32 timer_curr_value0; |
||||||
|
u32 timer_curr_value1; |
||||||
|
u32 timer_ctrl_reg; |
||||||
|
u32 timer_int_status; |
||||||
|
}; |
||||||
|
|
||||||
|
void init_timer(void) |
||||||
|
{ |
||||||
|
struct rk3288_timer * const timer7_ptr = (void *)TIMER7_BASE; |
||||||
|
|
||||||
|
writel(0xffffffff, &timer7_ptr->timer_load_count0); |
||||||
|
writel(0xffffffff, &timer7_ptr->timer_load_count1); |
||||||
|
writel(1, &timer7_ptr->timer_ctrl_reg); |
||||||
|
} |
||||||
|
|
||||||
|
static int configure_emmc(struct udevice *pinctrl) |
||||||
|
{ |
||||||
|
struct gpio_desc desc; |
||||||
|
int ret; |
||||||
|
|
||||||
|
pinctrl_request_noflags(pinctrl, PERIPH_ID_EMMC); |
||||||
|
|
||||||
|
/*
|
||||||
|
* TODO(sjg@chromium.org): Pick this up from device tree or perhaps |
||||||
|
* use the EMMC_PWREN setting. |
||||||
|
*/ |
||||||
|
ret = dm_gpio_lookup_name("D9", &desc); |
||||||
|
if (ret) { |
||||||
|
debug("gpio ret=%d\n", ret); |
||||||
|
return ret; |
||||||
|
} |
||||||
|
ret = dm_gpio_request(&desc, "emmc_pwren"); |
||||||
|
if (ret) { |
||||||
|
debug("gpio_request ret=%d\n", ret); |
||||||
|
return ret; |
||||||
|
} |
||||||
|
ret = dm_gpio_set_dir_flags(&desc, GPIOD_IS_OUT); |
||||||
|
if (ret) { |
||||||
|
debug("gpio dir ret=%d\n", ret); |
||||||
|
return ret; |
||||||
|
} |
||||||
|
ret = dm_gpio_set_value(&desc, 1); |
||||||
|
if (ret) { |
||||||
|
debug("gpio value ret=%d\n", ret); |
||||||
|
return ret; |
||||||
|
} |
||||||
|
|
||||||
|
return 0; |
||||||
|
} |
||||||
|
|
||||||
|
void board_init_f(ulong dummy) |
||||||
|
{ |
||||||
|
struct udevice *pinctrl; |
||||||
|
struct udevice *dev; |
||||||
|
int ret; |
||||||
|
|
||||||
|
/* Example code showing how to enable the debug UART on RK3288 */ |
||||||
|
#ifdef EARLY_UART |
||||||
|
#include <asm/arch/grf_rk3288.h> |
||||||
|
/* Enable early UART on the RK3288 */ |
||||||
|
#define GRF_BASE 0xff770000 |
||||||
|
struct rk3288_grf * const grf = (void *)GRF_BASE; |
||||||
|
|
||||||
|
rk_clrsetreg(&grf->gpio7ch_iomux, GPIO7C7_MASK << GPIO7C7_SHIFT | |
||||||
|
GPIO7C6_MASK << GPIO7C6_SHIFT, |
||||||
|
GPIO7C7_UART2DBG_SOUT << GPIO7C7_SHIFT | |
||||||
|
GPIO7C6_UART2DBG_SIN << GPIO7C6_SHIFT); |
||||||
|
/*
|
||||||
|
* Debug UART can be used from here if required: |
||||||
|
* |
||||||
|
* debug_uart_init(); |
||||||
|
* printch('a'); |
||||||
|
* printhex8(0x1234); |
||||||
|
* printascii("string"); |
||||||
|
*/ |
||||||
|
debug_uart_init(); |
||||||
|
#endif |
||||||
|
|
||||||
|
ret = spl_init(); |
||||||
|
if (ret) { |
||||||
|
debug("spl_init() failed: %d\n", ret); |
||||||
|
hang(); |
||||||
|
} |
||||||
|
|
||||||
|
init_timer(); |
||||||
|
configure_l2ctlr(); |
||||||
|
|
||||||
|
ret = uclass_get_device(UCLASS_CLK, 0, &dev); |
||||||
|
if (ret) { |
||||||
|
debug("CLK init failed: %d\n", ret); |
||||||
|
return; |
||||||
|
} |
||||||
|
|
||||||
|
ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl); |
||||||
|
if (ret) { |
||||||
|
debug("Pinctrl init failed: %d\n", ret); |
||||||
|
return; |
||||||
|
} |
||||||
|
|
||||||
|
ret = uclass_get_device(UCLASS_RAM, 0, &dev); |
||||||
|
if (ret) { |
||||||
|
debug("DRAM init failed: %d\n", ret); |
||||||
|
return; |
||||||
|
} |
||||||
|
} |
||||||
|
|
||||||
|
static int setup_led(void) |
||||||
|
{ |
||||||
|
#ifdef CONFIG_SPL_LED |
||||||
|
struct udevice *dev; |
||||||
|
char *led_name; |
||||||
|
int ret; |
||||||
|
|
||||||
|
led_name = fdtdec_get_config_string(gd->fdt_blob, "u-boot,boot-led"); |
||||||
|
if (!led_name) |
||||||
|
return 0; |
||||||
|
ret = led_get_by_label(led_name, &dev); |
||||||
|
if (ret) { |
||||||
|
debug("%s: get=%d\n", __func__, ret); |
||||||
|
return ret; |
||||||
|
} |
||||||
|
ret = led_set_on(dev, 1); |
||||||
|
if (ret) |
||||||
|
return ret; |
||||||
|
#endif |
||||||
|
|
||||||
|
return 0; |
||||||
|
} |
||||||
|
|
||||||
|
void spl_board_init(void) |
||||||
|
{ |
||||||
|
struct udevice *pinctrl; |
||||||
|
int ret; |
||||||
|
|
||||||
|
ret = setup_led(); |
||||||
|
|
||||||
|
if (ret) { |
||||||
|
debug("LED ret=%d\n", ret); |
||||||
|
hang(); |
||||||
|
} |
||||||
|
|
||||||
|
ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl); |
||||||
|
if (ret) { |
||||||
|
debug("%s: Cannot find pinctrl device\n", __func__); |
||||||
|
goto err; |
||||||
|
} |
||||||
|
ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_SDCARD); |
||||||
|
if (ret) { |
||||||
|
debug("%s: Failed to set up SD card\n", __func__); |
||||||
|
goto err; |
||||||
|
} |
||||||
|
ret = configure_emmc(pinctrl); |
||||||
|
if (ret) { |
||||||
|
debug("%s: Failed to set up eMMC\n", __func__); |
||||||
|
goto err; |
||||||
|
} |
||||||
|
|
||||||
|
/* Enable debug UART */ |
||||||
|
ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_UART_DBG); |
||||||
|
if (ret) { |
||||||
|
debug("%s: Failed to set up console UART\n", __func__); |
||||||
|
goto err; |
||||||
|
} |
||||||
|
|
||||||
|
preloader_console_init(); |
||||||
|
return; |
||||||
|
err: |
||||||
|
printf("spl_board_init: Error %d\n", ret); |
||||||
|
|
||||||
|
/* No way to report error here */ |
||||||
|
hang(); |
||||||
|
} |
@ -0,0 +1,46 @@ |
|||||||
|
/*
|
||||||
|
* (C) Copyright 2015 Google, Inc |
||||||
|
* |
||||||
|
* SPDX-License-Identifier: GPL-2.0+ |
||||||
|
*/ |
||||||
|
|
||||||
|
#include <common.h> |
||||||
|
#include <dm.h> |
||||||
|
#include <ram.h> |
||||||
|
|
||||||
|
DECLARE_GLOBAL_DATA_PTR; |
||||||
|
|
||||||
|
int board_init(void) |
||||||
|
{ |
||||||
|
return 0; |
||||||
|
} |
||||||
|
|
||||||
|
int dram_init(void) |
||||||
|
{ |
||||||
|
struct ram_info ram; |
||||||
|
struct udevice *dev; |
||||||
|
int ret; |
||||||
|
|
||||||
|
ret = uclass_get_device(UCLASS_RAM, 0, &dev); |
||||||
|
if (ret) { |
||||||
|
debug("DRAM init failed: %d\n", ret); |
||||||
|
return ret; |
||||||
|
} |
||||||
|
ret = ram_get_info(dev, &ram); |
||||||
|
if (ret) { |
||||||
|
debug("Cannot get DRAM size: %d\n", ret); |
||||||
|
return ret; |
||||||
|
} |
||||||
|
debug("SDRAM base=%lx, size=%x\n", ram.base, ram.size); |
||||||
|
gd->ram_size = ram.size; |
||||||
|
|
||||||
|
return 0; |
||||||
|
} |
||||||
|
|
||||||
|
#ifndef CONFIG_SYS_DCACHE_OFF |
||||||
|
void enable_caches(void) |
||||||
|
{ |
||||||
|
/* Enable D-cache. I-cache is already enabled in start.S */ |
||||||
|
dcache_enable(); |
||||||
|
} |
||||||
|
#endif |
@ -0,0 +1,28 @@ |
|||||||
|
/*
|
||||||
|
* (C) Copyright 2015 Google, Inc |
||||||
|
* |
||||||
|
* SPDX-License-Identifier: GPL-2.0+ |
||||||
|
*/ |
||||||
|
|
||||||
|
#include <common.h> |
||||||
|
#include <dm.h> |
||||||
|
#include <errno.h> |
||||||
|
#include <fdtdec.h> |
||||||
|
#include <linux/err.h> |
||||||
|
|
||||||
|
void *rockchip_get_cru(void) |
||||||
|
{ |
||||||
|
struct udevice *dev; |
||||||
|
fdt_addr_t addr; |
||||||
|
int ret; |
||||||
|
|
||||||
|
ret = uclass_get_device(UCLASS_CLK, 0, &dev); |
||||||
|
if (ret) |
||||||
|
return ERR_PTR(ret); |
||||||
|
|
||||||
|
addr = dev_get_addr(dev); |
||||||
|
if (addr == FDT_ADDR_T_NONE) |
||||||
|
return ERR_PTR(-EINVAL); |
||||||
|
|
||||||
|
return (void *)addr; |
||||||
|
} |
@ -0,0 +1,6 @@ |
|||||||
|
if ROCKCHIP_RK3288 |
||||||
|
|
||||||
|
config SYS_SOC |
||||||
|
default "rockchip" |
||||||
|
|
||||||
|
endif |
Loading…
Reference in new issue