mmc: tmio: move clk_enable() to each driver's probe function

I need to differentiate the clock handling for uniphier-sd.  Move it
to each driver's probe function from the tmio common code so that
renesas-sdhi will not be affected.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

drivers/mmc/renesas-sdhi.c

@@ -330,8 +330,10 @@ static const struct udevice_id renesas_sdhi_match[] = {
 
 static int renesas_sdhi_probe(struct udevice *dev)
 {
+	struct tmio_sd_priv *priv = dev_get_priv(dev);
 	u32 quirks = dev_get_driver_data(dev);
 	struct fdt_resource reg_res;
+	struct clk clk;
 	DECLARE_GLOBAL_DATA_PTR;
 	int ret;
 
@@ -348,6 +350,27 @@ static int renesas_sdhi_probe(struct udevice *dev)
 			quirks |= TMIO_SD_CAP_16BIT;
 	}
 
+	ret = clk_get_by_index(dev, 0, &clk);
+	if (ret < 0) {
+		dev_err(dev, "failed to get host clock\n");
+		return ret;
+	}
+
+	/* set to max rate */
+	priv->mclk = clk_set_rate(&clk, ULONG_MAX);
+	if (IS_ERR_VALUE(priv->mclk)) {
+		dev_err(dev, "failed to set rate for host clock\n");
+		clk_free(&clk);
+		return priv->mclk;
+	}
+
+	ret = clk_enable(&clk);
+	clk_free(&clk);
+	if (ret) {
+		dev_err(dev, "failed to enable host clock\n");
+		return ret;
+	}
+
 	ret = tmio_sd_probe(dev, quirks);
 #if CONFIG_IS_ENABLED(MMC_HS200_SUPPORT)
 	if (!ret)

drivers/mmc/tmio-common.c

@@ -713,7 +713,6 @@ int tmio_sd_probe(struct udevice *dev, u32 quirks)
 	struct tmio_sd_priv *priv = dev_get_priv(dev);
 	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
 	fdt_addr_t base;
-	struct clk clk;
 	int ret;
 
 	base = devfdt_get_addr(dev);
@@ -728,27 +727,6 @@ int tmio_sd_probe(struct udevice *dev, u32 quirks)
 	device_get_supply_regulator(dev, "vqmmc-supply", &priv->vqmmc_dev);
 #endif
 
-	ret = clk_get_by_index(dev, 0, &clk);
-	if (ret < 0) {
-		dev_err(dev, "failed to get host clock\n");
-		return ret;
-	}
-
-	/* set to max rate */
-	priv->mclk = clk_set_rate(&clk, ULONG_MAX);
-	if (IS_ERR_VALUE(priv->mclk)) {
-		dev_err(dev, "failed to set rate for host clock\n");
-		clk_free(&clk);
-		return priv->mclk;
-	}
-
-	ret = clk_enable(&clk);
-	clk_free(&clk);
-	if (ret) {
-		dev_err(dev, "failed to enable host clock\n");
-		return ret;
-	}
-
 	ret = mmc_of_parse(dev, &plat->cfg);
 	if (ret < 0) {
 		dev_err(dev, "failed to parse host caps\n");

drivers/mmc/uniphier-sd.c

@@ -32,6 +32,31 @@ static const struct udevice_id uniphier_sd_match[] = {
 
 static int uniphier_sd_probe(struct udevice *dev)
 {
+	struct tmio_sd_priv *priv = dev_get_priv(dev);
+	struct clk clk;
+	int ret;
+
+	ret = clk_get_by_index(dev, 0, &clk);
+	if (ret < 0) {
+		dev_err(dev, "failed to get host clock\n");
+		return ret;
+	}
+
+	/* set to max rate */
+	priv->mclk = clk_set_rate(&clk, ULONG_MAX);
+	if (IS_ERR_VALUE(priv->mclk)) {
+		dev_err(dev, "failed to set rate for host clock\n");
+		clk_free(&clk);
+		return priv->mclk;
+	}
+
+	ret = clk_enable(&clk);
+	clk_free(&clk);
+	if (ret) {
+		dev_err(dev, "failed to enable host clock\n");
+		return ret;
+	}
+
 	return tmio_sd_probe(dev, 0);
 }