The quad100hd has been unmaintained and dead ever since it's been added some 6 years ago. Remove it. Also update README.scrapyard and insert some commit IDs for removed boards. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Gary Jennejohn <gljennjohn@googlemail.com>master
Wolfgang Denk
11 years ago
committed by
Tom Rini
parent
90b51c33f3
commit
3569571db2
@ -1,8 +0,0 @@ |
|||||||
#
|
|
||||||
# (C) Copyright 2007
|
|
||||||
# Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
||||||
#
|
|
||||||
# SPDX-License-Identifier: GPL-2.0+
|
|
||||||
#
|
|
||||||
|
|
||||||
obj-y = quad100hd.o nand.o
|
|
||||||
@ -1,53 +0,0 @@ |
|||||||
/*
|
|
||||||
* (C) Copyright 2008 |
|
||||||
* Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de |
|
||||||
* |
|
||||||
* SPDX-License-Identifier: GPL-2.0+ |
|
||||||
*/ |
|
||||||
|
|
||||||
#include <common.h> |
|
||||||
#include <config.h> |
|
||||||
#if defined(CONFIG_CMD_NAND) |
|
||||||
#include <asm/ppc4xx-gpio.h> |
|
||||||
#include <asm/io.h> |
|
||||||
#include <nand.h> |
|
||||||
|
|
||||||
/*
|
|
||||||
* hardware specific access to control-lines |
|
||||||
*/ |
|
||||||
static void quad100hd_hwcontrol(struct mtd_info *mtd, |
|
||||||
int cmd, unsigned int ctrl) |
|
||||||
{ |
|
||||||
struct nand_chip *this = mtd->priv; |
|
||||||
|
|
||||||
if (ctrl & NAND_CTRL_CHANGE) { |
|
||||||
gpio_write_bit(CONFIG_SYS_NAND_CLE, !!(ctrl & NAND_CLE)); |
|
||||||
gpio_write_bit(CONFIG_SYS_NAND_ALE, !!(ctrl & NAND_ALE)); |
|
||||||
gpio_write_bit(CONFIG_SYS_NAND_CE, !(ctrl & NAND_NCE)); |
|
||||||
} |
|
||||||
|
|
||||||
if (cmd != NAND_CMD_NONE) |
|
||||||
writeb(cmd, this->IO_ADDR_W); |
|
||||||
} |
|
||||||
|
|
||||||
static int quad100hd_nand_ready(struct mtd_info *mtd) |
|
||||||
{ |
|
||||||
return gpio_read_in_bit(CONFIG_SYS_NAND_RDY); |
|
||||||
} |
|
||||||
|
|
||||||
/*
|
|
||||||
* Main initialization routine |
|
||||||
*/ |
|
||||||
int board_nand_init(struct nand_chip *nand) |
|
||||||
{ |
|
||||||
/* Set address of hardware control function */ |
|
||||||
nand->cmd_ctrl = quad100hd_hwcontrol; |
|
||||||
nand->dev_ready = quad100hd_nand_ready; |
|
||||||
nand->ecc.mode = NAND_ECC_SOFT; |
|
||||||
/* 15 us command delay time */ |
|
||||||
nand->chip_delay = 20; |
|
||||||
|
|
||||||
/* Return happy */ |
|
||||||
return 0; |
|
||||||
} |
|
||||||
#endif /* CONFIG_CMD_NAND */ |
|
||||||
@ -1,73 +0,0 @@ |
|||||||
/*
|
|
||||||
* (C) Copyright 2008 |
|
||||||
* Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de. |
|
||||||
* |
|
||||||
* Based in part on board/icecube/icecube.c from PPCBoot |
|
||||||
* (C) Copyright 2003 Intrinsyc Software |
|
||||||
* |
|
||||||
* SPDX-License-Identifier: GPL-2.0+ |
|
||||||
*/ |
|
||||||
|
|
||||||
#include <common.h> |
|
||||||
#include <command.h> |
|
||||||
#include <malloc.h> |
|
||||||
#include <environment.h> |
|
||||||
#include <logbuff.h> |
|
||||||
#include <post.h> |
|
||||||
|
|
||||||
#include <asm/processor.h> |
|
||||||
#include <asm/io.h> |
|
||||||
#include <asm/ppc4xx-gpio.h> |
|
||||||
|
|
||||||
DECLARE_GLOBAL_DATA_PTR; |
|
||||||
|
|
||||||
int board_early_init_f(void) |
|
||||||
{ |
|
||||||
/* taken from PPCBoot */ |
|
||||||
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ |
|
||||||
mtdcr(UIC0ER, 0x00000000); /* disable all ints */ |
|
||||||
mtdcr(UIC0CR, 0x00000000); |
|
||||||
mtdcr(UIC0PR, 0xFFFF7FFE); /* set int polarities */ |
|
||||||
mtdcr(UIC0TR, 0x00000000); /* set int trigger levels */ |
|
||||||
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ |
|
||||||
mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */ |
|
||||||
|
|
||||||
mtdcr(CPC0_SRR, 0x00040000); /* Hold PCI bridge in reset */ |
|
||||||
|
|
||||||
return 0; |
|
||||||
} |
|
||||||
|
|
||||||
/*
|
|
||||||
* Check Board Identity: |
|
||||||
*/ |
|
||||||
int checkboard(void) |
|
||||||
{ |
|
||||||
char buf[64]; |
|
||||||
int i = getenv_f("serial#", buf, sizeof(buf)); |
|
||||||
#ifdef DISPLAY_BOARD_INFO |
|
||||||
sys_info_t sysinfo; |
|
||||||
#endif |
|
||||||
|
|
||||||
puts("Board: Quad100hd"); |
|
||||||
|
|
||||||
if (i > 0) { |
|
||||||
puts(", serial# "); |
|
||||||
puts(buf); |
|
||||||
} |
|
||||||
putc('\n'); |
|
||||||
|
|
||||||
#ifdef DISPLAY_BOARD_INFO |
|
||||||
/* taken from ppcboot */ |
|
||||||
get_sys_info(&sysinfo); |
|
||||||
|
|
||||||
printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz); |
|
||||||
printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000); |
|
||||||
printf("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000); |
|
||||||
printf("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000); |
|
||||||
printf("\tEPB: %lu MHz\n", sysinfo.freqPLB / (sysinfo.pllExtBusDiv * |
|
||||||
1000000)); |
|
||||||
printf("\tPCI: %lu MHz\n", sysinfo.freqPCI / 1000000); |
|
||||||
#endif |
|
||||||
|
|
||||||
return 0; |
|
||||||
} |
|
||||||
@ -1,281 +0,0 @@ |
|||||||
/*
|
|
||||||
* (C) Copyright 2008 |
|
||||||
* Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de. |
|
||||||
* |
|
||||||
* SPDX-License-Identifier: GPL-2.0+ |
|
||||||
*/ |
|
||||||
|
|
||||||
/************************************************************************
|
|
||||||
* quad100hd.h - configuration for Quad100hd board |
|
||||||
***********************************************************************/ |
|
||||||
#ifndef __CONFIG_H |
|
||||||
#define __CONFIG_H |
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* High Level Configuration Options |
|
||||||
*----------------------------------------------------------------------*/ |
|
||||||
#define CONFIG_QUAD100HD 1 /* Board is Quad100hd */ |
|
||||||
#define CONFIG_405EP 1 /* Specifc 405EP support*/ |
|
||||||
|
|
||||||
#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 |
|
||||||
|
|
||||||
#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ |
|
||||||
|
|
||||||
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ |
|
||||||
|
|
||||||
#define PLLMR0_DEFAULT PLLMR0_266_133_66 /* no PCI */ |
|
||||||
#define PLLMR1_DEFAULT PLLMR1_266_133_66 /* no PCI */ |
|
||||||
|
|
||||||
/* the environment is in the EEPROM by default */ |
|
||||||
#define CONFIG_ENV_IS_IN_EEPROM |
|
||||||
#undef CONFIG_ENV_IS_IN_FLASH |
|
||||||
|
|
||||||
#define CONFIG_PPC4xx_EMAC |
|
||||||
#define CONFIG_HAS_ETH1 1 |
|
||||||
#define CONFIG_MII 1 /* MII PHY management */ |
|
||||||
#define CONFIG_PHY_ADDR 0x01 /* PHY address */ |
|
||||||
#define CONFIG_SYS_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */ |
|
||||||
#define CONFIG_PHY_RESET 1 |
|
||||||
#define CONFIG_PHY_RESET_DELAY 300 /* PHY RESET recovery delay */ |
|
||||||
|
|
||||||
/*
|
|
||||||
* Command line configuration. |
|
||||||
*/ |
|
||||||
#include <config_cmd_default.h> |
|
||||||
|
|
||||||
#undef CONFIG_CMD_ASKENV |
|
||||||
#undef CONFIG_CMD_CACHE |
|
||||||
#define CONFIG_CMD_DHCP |
|
||||||
#undef CONFIG_CMD_DIAG |
|
||||||
#define CONFIG_CMD_EEPROM |
|
||||||
#undef CONFIG_CMD_ELF |
|
||||||
#define CONFIG_CMD_I2C |
|
||||||
#undef CONFIG_CMD_IRQ |
|
||||||
#define CONFIG_CMD_JFFS2 |
|
||||||
#undef CONFIG_CMD_MII |
|
||||||
#define CONFIG_CMD_NAND |
|
||||||
#undef CONFIG_CMD_PING |
|
||||||
#define CONFIG_CMD_REGINFO |
|
||||||
|
|
||||||
#undef CONFIG_WATCHDOG /* watchdog disabled */ |
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* SDRAM |
|
||||||
*----------------------------------------------------------------------*/ |
|
||||||
/*
|
|
||||||
* SDRAM configuration (please see cpu/ppc/sdram.[ch]) |
|
||||||
*/ |
|
||||||
#define CONFIG_SDRAM_BANK0 1 |
|
||||||
|
|
||||||
/* FIX! SDRAM timings used in datasheet */ |
|
||||||
#define CONFIG_SYS_SDRAM_CL 3 /* CAS latency */ |
|
||||||
#define CONFIG_SYS_SDRAM_tRP 20 /* PRECHARGE command period */ |
|
||||||
#define CONFIG_SYS_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE command period */ |
|
||||||
#define CONFIG_SYS_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */ |
|
||||||
#define CONFIG_SYS_SDRAM_tRFC 66 /* Auto refresh period */ |
|
||||||
|
|
||||||
/*
|
|
||||||
* JFFS2 |
|
||||||
*/ |
|
||||||
#define CONFIG_SYS_JFFS2_FIRST_BANK 0 |
|
||||||
#ifdef CONFIG_SYS_KERNEL_IN_JFFS2 |
|
||||||
#define CONFIG_SYS_JFFS2_FIRST_SECTOR 0 /* JFFS starts at block 0 */ |
|
||||||
#else /* kernel not in JFFS */ |
|
||||||
#define CONFIG_SYS_JFFS2_FIRST_SECTOR 8 /* block 0-7 is kernel (1MB = 8 sectors) */ |
|
||||||
#endif |
|
||||||
#define CONFIG_SYS_JFFS2_NUM_BANKS 1 |
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* Serial Port |
|
||||||
*----------------------------------------------------------------------*/ |
|
||||||
#define CONFIG_CONS_INDEX 1 /* Use UART0 */ |
|
||||||
#define CONFIG_SYS_NS16550 |
|
||||||
#define CONFIG_SYS_NS16550_SERIAL |
|
||||||
#define CONFIG_SYS_NS16550_REG_SIZE 1 |
|
||||||
#define CONFIG_SYS_NS16550_CLK get_serial_clock() |
|
||||||
#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */ |
|
||||||
#define CONFIG_SYS_BASE_BAUD 691200 |
|
||||||
#define CONFIG_BAUDRATE 115200 |
|
||||||
|
|
||||||
/* The following table includes the supported baudrates */ |
|
||||||
#define CONFIG_SYS_BAUDRATE_TABLE \ |
|
||||||
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} |
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* Miscellaneous configurable options |
|
||||||
*----------------------------------------------------------------------*/ |
|
||||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */ |
|
||||||
#if defined(CONFIG_CMD_KGDB) |
|
||||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
|
||||||
#else |
|
||||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
|
||||||
#endif |
|
||||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ |
|
||||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ |
|
||||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ |
|
||||||
|
|
||||||
#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ |
|
||||||
#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ |
|
||||||
|
|
||||||
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ |
|
||||||
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_info (bd_t) */ |
|
||||||
|
|
||||||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ |
|
||||||
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ |
|
||||||
|
|
||||||
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ |
|
||||||
#define CONFIG_LOOPW 1 /* enable loopw command */ |
|
||||||
#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ |
|
||||||
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ |
|
||||||
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ |
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* I2C |
|
||||||
*----------------------------------------------------------------------*/ |
|
||||||
#define CONFIG_SYS_I2C |
|
||||||
#define CONFIG_SYS_I2C_PPC4XX |
|
||||||
#define CONFIG_SYS_I2C_PPC4XX_CH0 |
|
||||||
#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 |
|
||||||
#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F |
|
||||||
|
|
||||||
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* base address */ |
|
||||||
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* bytes of address */ |
|
||||||
|
|
||||||
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* 8 byte write page size */ |
|
||||||
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ |
|
||||||
#define CONFIG_SYS_EEPROM_SIZE 0x2000 |
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* Start addresses for the final memory configuration |
|
||||||
* (Set up by the startup code) |
|
||||||
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 |
|
||||||
*/ |
|
||||||
#define CONFIG_SYS_SDRAM_BASE 0x00000000 |
|
||||||
#define CONFIG_SYS_FLASH_BASE 0xFFC00000 |
|
||||||
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */ |
|
||||||
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ |
|
||||||
#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE) |
|
||||||
|
|
||||||
/*
|
|
||||||
* For booting Linux, the board info and command line data |
|
||||||
* have to be in the first 8 MB of memory, since this is |
|
||||||
* the maximum mapped by the Linux kernel during initialization. |
|
||||||
*/ |
|
||||||
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ |
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* FLASH organization |
|
||||||
*/ |
|
||||||
#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ |
|
||||||
#define CONFIG_FLASH_CFI_DRIVER |
|
||||||
|
|
||||||
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } |
|
||||||
|
|
||||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ |
|
||||||
#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ |
|
||||||
|
|
||||||
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ |
|
||||||
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ |
|
||||||
|
|
||||||
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ |
|
||||||
#define CONFIG_SYS_FLASH_INCREMENT 0 /* there is only one bank */ |
|
||||||
|
|
||||||
#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ |
|
||||||
#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ |
|
||||||
|
|
||||||
#ifdef CONFIG_ENV_IS_IN_FLASH |
|
||||||
#define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ |
|
||||||
/* the environment is located before u-boot */ |
|
||||||
#define CONFIG_ENV_ADDR (CONFIG_SYS_TEXT_BASE - CONFIG_ENV_SECT_SIZE) |
|
||||||
|
|
||||||
/* Address and size of Redundant Environment Sector */ |
|
||||||
#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE) |
|
||||||
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) |
|
||||||
#endif |
|
||||||
|
|
||||||
#ifdef CONFIG_ENV_IS_IN_EEPROM |
|
||||||
#define CONFIG_ENV_SIZE 0x400 /* Size of Environment vars */ |
|
||||||
#define CONFIG_ENV_OFFSET 0x00000000 |
|
||||||
#define CONFIG_SYS_ENABLE_CRC_16 1 /* Intrinsyc formatting used crc16 */ |
|
||||||
#endif |
|
||||||
|
|
||||||
/* partly from PPCBoot */ |
|
||||||
/* NAND */ |
|
||||||
#define CONFIG_NAND |
|
||||||
#ifdef CONFIG_NAND |
|
||||||
#define CONFIG_SYS_NAND_BASE 0x60000000 |
|
||||||
#define CONFIG_SYS_NAND_CS 10 /* our CS is GPIO10 */ |
|
||||||
#define CONFIG_SYS_NAND_RDY 23 /* our RDY is GPIO23 */ |
|
||||||
#define CONFIG_SYS_NAND_CE 24 /* our CE is GPIO24 */ |
|
||||||
#define CONFIG_SYS_NAND_CLE 31 /* our CLE is GPIO31 */ |
|
||||||
#define CONFIG_SYS_NAND_ALE 30 /* our ALE is GPIO30 */ |
|
||||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1 |
|
||||||
|
|
||||||
#endif |
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* Definitions for initial stack pointer and data area (in data cache) |
|
||||||
*/ |
|
||||||
/* use on chip memory (OCM) for temperary stack until sdram is tested */ |
|
||||||
/* see ./arch/powerpc/cpu/ppc4xx/start.S */ |
|
||||||
#define CONFIG_SYS_TEMP_STACK_OCM 1 |
|
||||||
|
|
||||||
/* On Chip Memory location */ |
|
||||||
#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 |
|
||||||
#define CONFIG_SYS_OCM_DATA_SIZE 0x1000 |
|
||||||
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of OCM */ |
|
||||||
#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ |
|
||||||
|
|
||||||
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) |
|
||||||
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET |
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* External Bus Controller (EBC) Setup |
|
||||||
* Taken from PPCBoot board/icecube/icecube.h |
|
||||||
*/ |
|
||||||
|
|
||||||
/* see ./arch/powerpc/cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/ndfc.c */ |
|
||||||
#define CONFIG_SYS_EBC_PB0AP 0x04002480 |
|
||||||
/* AMD NOR flash - this corresponds to FLASH_BASE so may be correct */ |
|
||||||
#define CONFIG_SYS_EBC_PB0CR 0xFFC5A000 |
|
||||||
#define CONFIG_SYS_EBC_PB1AP 0x04005480 |
|
||||||
#define CONFIG_SYS_EBC_PB1CR 0x60018000 |
|
||||||
#define CONFIG_SYS_EBC_PB2AP 0x00000000 |
|
||||||
#define CONFIG_SYS_EBC_PB2CR 0x00000000 |
|
||||||
#define CONFIG_SYS_EBC_PB3AP 0x00000000 |
|
||||||
#define CONFIG_SYS_EBC_PB3CR 0x00000000 |
|
||||||
#define CONFIG_SYS_EBC_PB4AP 0x00000000 |
|
||||||
#define CONFIG_SYS_EBC_PB4CR 0x00000000 |
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* Definitions for GPIO setup (PPC405EP specific) |
|
||||||
* |
|
||||||
* Taken in part from PPCBoot board/icecube/icecube.h |
|
||||||
*/ |
|
||||||
/* see ./arch/powerpc/cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/start.S */ |
|
||||||
#define CONFIG_SYS_GPIO0_OSRL 0x55555550 |
|
||||||
#define CONFIG_SYS_GPIO0_OSRH 0x00000110 |
|
||||||
#define CONFIG_SYS_GPIO0_ISR1L 0x00000000 |
|
||||||
#define CONFIG_SYS_GPIO0_ISR1H 0x15555445 |
|
||||||
#define CONFIG_SYS_GPIO0_TSRL 0x00000000 |
|
||||||
#define CONFIG_SYS_GPIO0_TSRH 0x00000000 |
|
||||||
#define CONFIG_SYS_GPIO0_TCR 0xFFFF8097 |
|
||||||
#define CONFIG_SYS_GPIO0_ODR 0x00000000 |
|
||||||
|
|
||||||
#if defined(CONFIG_CMD_KGDB) |
|
||||||
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ |
|
||||||
#endif |
|
||||||
|
|
||||||
/* ENVIRONMENT VARS */ |
|
||||||
|
|
||||||
#define CONFIG_IPADDR 192.168.1.67 |
|
||||||
#define CONFIG_SERVERIP 192.168.1.50 |
|
||||||
#define CONFIG_GATEWAYIP 192.168.1.1 |
|
||||||
#define CONFIG_NETMASK 255.255.255.0 |
|
||||||
#define CONFIG_LOADADDR 300000 |
|
||||||
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ |
|
||||||
|
|
||||||
/* pass open firmware flat tree */ |
|
||||||
#define CONFIG_OF_LIBFDT 1 |
|
||||||
|
|
||||||
#endif /* __CONFIG_H */ |
|
||||||
Loading…
Reference in new issue