powerpc: MPC8555: Remove macro CONFIG_MPC8555

Replace CONFIG_MPC8555 with ARCH_MPC8555 in Kconfig and clean up existing
macros.

Signed-off-by: York Sun <york.sun@nxp.com>

arch/powerpc/cpu/mpc85xx/Kconfig

@@ -76,6 +76,7 @@ config TARGET_MPC8548CDS
 
 config TARGET_MPC8555CDS
 	bool "Support MPC8555CDS"
+	select ARCH_MPC8555
 
 config TARGET_MPC8560ADS
 	bool "Support MPC8560ADS"
@@ -207,6 +208,9 @@ config ARCH_MPC8544
 config ARCH_MPC8548
 	bool
 
+config ARCH_MPC8555
+	bool
+
 source "board/freescale/b4860qds/Kconfig"
 source "board/freescale/bsc9131rdb/Kconfig"
 source "board/freescale/bsc9132qds/Kconfig"

arch/powerpc/cpu/mpc85xx/cpu.c

@@ -294,7 +294,7 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 /* Everything after the first generation of PQ3 parts has RSTCR */
 #if defined(CONFIG_ARCH_MPC8540) || defined(CONFIG_ARCH_MPC8541) || \
-    defined(CONFIG_MPC8555) || defined(CONFIG_MPC8560)
+	defined(CONFIG_ARCH_MPC8555) || defined(CONFIG_MPC8560)
 	unsigned long val, msr;
 
 	/*

arch/powerpc/cpu/mpc85xx/speed.c

@@ -626,7 +626,7 @@ void get_sys_info(sys_info_t *sys_info)
 		 */
 		lcrr_div *= 4;
 #elif !defined(CONFIG_ARCH_MPC8540) && !defined(CONFIG_ARCH_MPC8541) && \
-    !defined(CONFIG_MPC8555) && !defined(CONFIG_MPC8560)
+	!defined(CONFIG_ARCH_MPC8555) && !defined(CONFIG_MPC8560)
 		/*
 		 * Yes, the entire PQ38 family use the same
 		 * bit-representation for twice the clock divider values.
@@ -682,7 +682,7 @@ int get_clocks (void)
 	 * AN2919.
 	 */
 #if defined(CONFIG_ARCH_MPC8540) || defined(CONFIG_ARCH_MPC8541) || \
-	defined(CONFIG_MPC8560) || defined(CONFIG_MPC8555) || \
+	defined(CONFIG_MPC8560) || defined(CONFIG_ARCH_MPC8555) || \
 	defined(CONFIG_P1022)
 	gd->arch.i2c1_clk = sys_info.freq_systembus;
 #elif defined(CONFIG_ARCH_MPC8544)

arch/powerpc/include/asm/config_mpc85xx.h

@@ -85,7 +85,7 @@
 #define CONFIG_SYS_FSL_ERRATUM_I2C_A004447
 #define CONFIG_SYS_FSL_A004447_SVR_REV	0x00
 
-#elif defined(CONFIG_MPC8555)
+#elif defined(CONFIG_ARCH_MPC8555)
 #define CONFIG_MAX_CPUS			1
 #define CONFIG_SYS_FSL_NUM_LAWS		8
 #define CONFIG_SYS_FSL_DDRC_GEN1

arch/powerpc/include/asm/cpm_85xx.h

@@ -77,7 +77,7 @@
  */
 #define CPM_DATAONLY_BASE	((uint)128)
 #define CPM_DP_NOSPACE		((uint)0x7FFFFFFF)
-#if defined(CONFIG_ARCH_MPC8541) || defined(CONFIG_MPC8555)
+#if defined(CONFIG_ARCH_MPC8541) || defined(CONFIG_ARCH_MPC8555)
 #define CPM_FCC_SPECIAL_BASE	((uint)0x00009000)
 #define CPM_DATAONLY_SIZE	((uint)(8 * 1024) - CPM_DATAONLY_BASE)
 #else	/* MPC8540, MPC8560 */

arch/powerpc/include/asm/fsl_lbc.h

@@ -326,7 +326,7 @@ void lbc_sdram_init(void);
 #define LCRR_CLKDIV			0x0000001F
 #define LCRR_CLKDIV_SHIFT		0
 #if defined(CONFIG_MPC83xx) || defined(CONFIG_ARCH_MPC8540) || \
-	defined(CONFIG_ARCH_MPC8541) || defined(CONFIG_MPC8555) || \
+	defined(CONFIG_ARCH_MPC8541) || defined(CONFIG_ARCH_MPC8555) || \
 	defined(CONFIG_MPC8560)
 #define LCRR_CLKDIV_2			0x00000002
 #define LCRR_CLKDIV_4			0x00000004

arch/powerpc/include/asm/immap_85xx.h

@@ -127,7 +127,7 @@ typedef struct ccsr_i2c {
 #if defined(CONFIG_ARCH_MPC8540) || \
 	defined(CONFIG_ARCH_MPC8541) || \
 	defined(CONFIG_ARCH_MPC8548) || \
-	defined(CONFIG_MPC8555)
+	defined(CONFIG_ARCH_MPC8555)
 /* DUART Registers */
 typedef struct ccsr_duart {
 	u8	res1[1280];

drivers/ddr/fsl/ctrl_regs.c

@@ -1831,7 +1831,7 @@ static void set_ddr_sdram_clk_cntl(fsl_ddr_cfg_regs_t *ddr,
 	unsigned int clk_adjust;	/* Clock adjust */
 	unsigned int ss_en = 0;		/* Source synchronous enable */
 
-#if defined(CONFIG_ARCH_MPC8541) || defined(CONFIG_MPC8555)
+#if defined(CONFIG_ARCH_MPC8541) || defined(CONFIG_ARCH_MPC8555)
 	/* Per FSL Application Note: AN2805 */
 	ss_en = 1;
 #endif

drivers/ddr/fsl/mpc85xx_ddr_gen1.c

@@ -47,7 +47,7 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 	out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
 	out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
 	out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
-#if defined(CONFIG_MPC8555) || defined(CONFIG_ARCH_MPC8541)
+#if defined(CONFIG_ARCH_MPC8555) || defined(CONFIG_ARCH_MPC8541)
 	out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
 #endif
 

drivers/input/keyboard.c

@@ -21,7 +21,7 @@ static struct input_config config;
 static int kbd_read_keys(struct input_config *config)
 {
 #if defined(CONFIG_MPC5xxx) || defined(CONFIG_ARCH_MPC8540) || \
-		defined(CONFIG_ARCH_MPC8541) || defined(CONFIG_MPC8555)
+		defined(CONFIG_ARCH_MPC8541) || defined(CONFIG_ARCH_MPC8555)
 	/* no ISR is used, so received chars must be polled */
 	ps2ser_check();
 #endif

include/configs/MPC8555CDS.h

@@ -17,7 +17,6 @@
 #define CONFIG_BOOKE		1	/* BOOKE */
 #define CONFIG_E500		1	/* BOOKE e500 family */
 #define CONFIG_CPM2		1	/* has CPM2 */
-#define CONFIG_MPC8555		1	/* MPC8555 specific */
 #define CONFIG_MPC8555CDS	1	/* MPC8555CDS board specific */
 
 #define	CONFIG_SYS_TEXT_BASE	0xfff80000

include/keyboard.h

@@ -99,7 +99,7 @@ extern void pckbd_leds(unsigned char leds);
 #endif /* !CONFIG_DM_KEYBOARD */
 
 #if defined(CONFIG_MPC5xxx) || defined(CONFIG_ARCH_MPC8540) || \
-		defined(CONFIG_ARCH_MPC8541) || defined(CONFIG_MPC8555)
+		defined(CONFIG_ARCH_MPC8541) || defined(CONFIG_ARCH_MPC8555)
 int ps2ser_check(void);
 #endif
 

scripts/config_whitelist.txt

@@ -3141,7 +3141,6 @@ CONFIG_MPC83XX_GPIO_1_INIT_VALUE
 CONFIG_MPC83XX_PCI2
 CONFIG_MPC850
 CONFIG_MPC855
-CONFIG_MPC8555
 CONFIG_MPC8555CDS
 CONFIG_MPC8560
 CONFIG_MPC8560ADS