Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

include/configs: Use new CONFIG_CMD_* in various s* named board config files.

Browse Source 
Signed-off-by: Jon Loeliger <jdl@freescale.com>
master
Jon Loeliger 17 years ago committed by Wolfgang Denk
parent 90cc3eb6d2
commit 46da1e96b7
15 changed files with 272 additions and 274 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 53
      include/configs/sacsng.h
  2. 48
      include/configs/sc3.h
  3. 17
      include/configs/sc520_cdp.h
  4. 17
      include/configs/sc520_spunk.h
  5. 24
      include/configs/scb9328.h
  6. 59
      include/configs/sequoia.h
  7. 14
      include/configs/shannon.h
  8. 29
      include/configs/smdk2400.h
  9. 29
      include/configs/smdk2410.h
  10. 47
      include/configs/smmaco4.h
  11. 53
      include/configs/sorcery.h
  12. 34
      include/configs/spc1920.h
  13. 89
      include/configs/spieval.h
  14. 8
      include/configs/suzaku.h
  15. 25
      include/configs/svm_sc8xx.h

53
include/configs/sacsng.h
Unescape View File

@ -502,31 +502,28 @@
*/ */
#define CONFIG_VERSION_VARIABLE #define CONFIG_VERSION_VARIABLE
/* What U-Boot subsytems do you want enabled? */
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ELF
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_I2C
#define CONFIG_CMD_SPI
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_IMMAP
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_PING
#undef CONFIG_CMD_KGDB
#ifdef CONFIG_ETHER_ON_FCC #ifdef CONFIG_ETHER_ON_FCC
# define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ #define CONFIG_CMD_MII
CFG_CMD_ELF | \ #endif
CFG_CMD_ASKENV | \
CFG_CMD_I2C | \
CFG_CMD_SPI | \
CFG_CMD_SDRAM | \
CFG_CMD_REGINFO | \
CFG_CMD_IMMAP | \
CFG_CMD_IRQ | \
CFG_CMD_PING | \
CFG_CMD_MII )
#else
# define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
CFG_CMD_ELF | \
CFG_CMD_ASKENV | \
CFG_CMD_I2C | \
CFG_CMD_SPI | \
CFG_CMD_SDRAM | \
CFG_CMD_REGINFO | \
CFG_CMD_IMMAP | \
CFG_CMD_IRQ | \
CFG_CMD_PING )
#endif /* CONFIG_ETHER_ON_FCC */
/* Where do the internal registers live? */ /* Where do the internal registers live? */
#define CFG_IMMR 0xF0000000 #define CFG_IMMR 0xF0000000
@ -544,10 +541,6 @@
#define CONFIG_SACSng 1 /* munged for the SACSng */ #define CONFIG_SACSng 1 /* munged for the SACSng */
#define CONFIG_CPM2 1 /* Has a CPM2 */ #define CONFIG_CPM2 1 /* Has a CPM2 */
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/* /*
* Miscellaneous configurable options * Miscellaneous configurable options
*/ */
@ -589,7 +582,7 @@
#define CFG_TFTP_TIMEOUT_COUNT 5 /* How many timeouts TFTP will allow */ #define CFG_TFTP_TIMEOUT_COUNT 5 /* How many timeouts TFTP will allow */
/* before it gives up. */ /* before it gives up. */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB) #if defined(CONFIG_CMD_KGDB)
# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ # define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else #else
# define CFG_CBSIZE 256 /* Console I/O Buffer Size */ # define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@ -732,7 +725,7 @@
*/ */
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB) #if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif #endif

48
include/configs/sc3.h
Unescape View File

@ -169,25 +169,27 @@
#define CONFIG_MII 1 /* add 405GP MII PHY management */ #define CONFIG_MII 1 /* add 405GP MII PHY management */
#define CONFIG_PHY_ADDR 1 /* the connected Phy defaults to address 1 */ #define CONFIG_PHY_ADDR 1 /* the connected Phy defaults to address 1 */
#define CONFIG_COMMANDS \ /*
(CONFIG_CMD_DFL | \ * Command line configuration.
CFG_CMD_AUTOSCRIPT | \ */
CFG_CMD_PCI | \ #include <config_cmd_default.h>
CFG_CMD_IRQ | \
CFG_CMD_NET | \
CFG_CMD_MII | \ #define CONFIG_CMD_AUTOSCRIPT
CFG_CMD_PING | \ #define CONFIG_CMD_PCI
CFG_CMD_NAND | \ #define CONFIG_CMD_IRQ
CFG_CMD_JFFS2 | \ #define CONFIG_CMD_NET
CFG_CMD_I2C | \ #define CONFIG_CMD_MII
CFG_CMD_IDE | \ #define CONFIG_CMD_PING
CFG_CMD_DATE | \ #define CONFIG_CMD_NAND
CFG_CMD_DHCP | \ #define CONFIG_CMD_JFFS2
CFG_CMD_CACHE | \ #define CONFIG_CMD_I2C
CFG_CMD_ELF ) #define CONFIG_CMD_IDE
#define CONFIG_CMD_DATE
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #define CONFIG_CMD_DHCP
#include <cmd_confdefs.h> #define CONFIG_CMD_CACHE
#define CONFIG_CMD_ELF
#undef CONFIG_WATCHDOG /* watchdog disabled */ #undef CONFIG_WATCHDOG /* watchdog disabled */
@ -277,7 +279,7 @@
* External peripheral base address * External peripheral base address
*----------------------------------------------------------------------- *-----------------------------------------------------------------------
*/ */
#if !(CONFIG_COMMANDS & CFG_CMD_IDE) #if !defined(CONFIG_CMD_IDE)
#undef CONFIG_IDE_LED /* no led for ide supported */ #undef CONFIG_IDE_LED /* no led for ide supported */
#undef CONFIG_IDE_RESET /* no reset for ide supported */ #undef CONFIG_IDE_RESET /* no reset for ide supported */
@ -286,7 +288,7 @@
* IDE/ATA stuff * IDE/ATA stuff
*----------------------------------------------------------------------- *-----------------------------------------------------------------------
*/ */
#else /* !(CONFIG_COMMANDS & CFG_CMD_IDE) */ #else
#define CONFIG_START_IDE 1 /* check, if use IDE */ #define CONFIG_START_IDE 1 /* check, if use IDE */
#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ #undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
@ -346,7 +348,7 @@
#endif /* IDE_USES_ISA_EMULATION */ #endif /* IDE_USES_ISA_EMULATION */
#endif /* !(CONFIG_COMMANDS & CFG_CMD_IDE) */ #endif
/* /*
#define CFG_KEY_REG_BASE_ADDR 0xF0100000 #define CFG_KEY_REG_BASE_ADDR 0xF0100000
@ -437,7 +439,7 @@ extern unsigned long offsetOfEnvironment;
#define CFG_CACHELINE_SIZE 32 #define CFG_CACHELINE_SIZE 32
#if (CONFIG_COMMANDS & CFG_CMD_KGDB) #if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif #endif

17
include/configs/sc520_cdp.h
Unescape View File

@ -67,16 +67,25 @@
#define CONFIG_BAUDRATE 9600 #define CONFIG_BAUDRATE 9600
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_JFFS2 | CFG_CMD_IDE | CFG_CMD_NET | CFG_CMD_EEPROM)
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ /*
#include <cmd_confdefs.h> * Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_PCI
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_IDE
#define CONFIG_CMD_NET
#define CONFIG_CMD_EEPROM
#define CONFIG_BOOTDELAY 15 #define CONFIG_BOOTDELAY 15
#define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyS0,9600" #define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyS0,9600"
/* #define CONFIG_BOOTCOMMAND "bootm 38000000" */ /* #define CONFIG_BOOTCOMMAND "bootm 38000000" */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB) #if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif #endif

17
include/configs/sc520_spunk.h
Unescape View File

@ -64,16 +64,25 @@
#define CONFIG_BAUDRATE 9600 #define CONFIG_BAUDRATE 9600
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_JFFS2 | CFG_CMD_IDE | CFG_CMD_NET | CFG_CMD_PCMCIA | CFG_CMD_EEPROM)
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ /*
#include <cmd_confdefs.h> * Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_PCI
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_IDE
#define CONFIG_CMD_NET
#define CONFIG_CMD_PCMCIA
#define CONFIG_CMD_EEPROM
#define CONFIG_BOOTDELAY 15 #define CONFIG_BOOTDELAY 15
#define CONFIG_BOOTARGS "root=/dev/mtdblock1 console=ttyS0,9600 mtdparts=phys:7936k(root),256k(uboot) " #define CONFIG_BOOTARGS "root=/dev/mtdblock1 console=ttyS0,9600 mtdparts=phys:7936k(root),256k(uboot) "
#define CONFIG_BOOTCOMMAND "setenv bootargs root=/dev/nfs ip=autoconf console=ttyS0,9600 mtdparts=phys:7808k(root),128k(env),256k(uboot); bootp; bootm" #define CONFIG_BOOTCOMMAND "setenv bootargs root=/dev/nfs ip=autoconf console=ttyS0,9600 mtdparts=phys:7808k(root),128k(env),256k(uboot); bootp; bootm"
#if (CONFIG_COMMANDS & CFG_CMD_KGDB) #if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif #endif

24
include/configs/scb9328.h
Unescape View File

@ -36,20 +36,18 @@
/* /*
* Definition of u-boot build in commands. Check out CONFIG_CMD_DFL if * Command line configuration.
* neccessary in include/cmd_confdefs.h file. (Un)comment for getting
* functionality or size of u-boot code.
*/ */
#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ #include <config_cmd_default.h>
& ~CFG_CMD_LOADS \
& ~CFG_CMD_CONSOLE \ #define CONFIG_CMD_NET
& ~CFG_CMD_AUTOSCRIPT \ #define CONFIG_CMD_PING
| CFG_CMD_NET \ #define CONFIG_CMD_DHCP
| CFG_CMD_PING \
| CFG_CMD_DHCP \ #undef CONFIG_CMD_LOADS
) #undef CONFIG_CMD_CONSOLE
#undef CONFIG_CMD_AUTOSCRIPT
#include <cmd_confdefs.h>
/* /*
* Boot options. Setting delay to -1 stops autostart count down. * Boot options. Setting delay to -1 stops autostart count down.

59
include/configs/sequoia.h
Unescape View File

@ -299,9 +299,6 @@
/* Comment this out to enable USB 1.1 device */ /* Comment this out to enable USB 1.1 device */
#define USB_2_0_DEVICE #define USB_2_0_DEVICE
#define CMD_USB CFG_CMD_USB
#else
#define CMD_USB 0 /* no USB on 440GRx */
#endif /* CONFIG_440EPX */ #endif /* CONFIG_440EPX */
/* Partitions */ /* Partitions */
@ -309,25 +306,34 @@
#define CONFIG_DOS_PARTITION #define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION #define CONFIG_ISO_PARTITION
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \ /*
CFG_CMD_DHCP | \ * Command line configuration.
CFG_CMD_DTT | \ */
CFG_CMD_DIAG | \ #include <config_cmd_default.h>
CFG_CMD_EEPROM | \
CFG_CMD_ELF | \ #define CONFIG_CMD_ASKENV
CFG_CMD_FAT | \ #define CONFIG_CMD_DHCP
CFG_CMD_I2C | \ #define CONFIG_CMD_DTT
CFG_CMD_IRQ | \ #define CONFIG_CMD_DIAG
CFG_CMD_MII | \ #define CONFIG_CMD_EEPROM
CFG_CMD_NAND | \ #define CONFIG_CMD_ELF
CFG_CMD_NET | \ #define CONFIG_CMD_FAT
CFG_CMD_NFS | \ #define CONFIG_CMD_I2C
CFG_CMD_PCI | \ #define CONFIG_CMD_IRQ
CFG_CMD_PING | \ #define CONFIG_CMD_MII
CFG_CMD_REGINFO | \ #define CONFIG_CMD_NAND
CFG_CMD_SDRAM | \ #define CONFIG_CMD_NET
CMD_USB) #define CONFIG_CMD_NFS
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SDRAM
#ifdef CONFIG_440EPX
#define CONFIG_CMD_USB
#endif
/* POST support */ /* POST support */
#define CONFIG_POST (CFG_POST_MEMORY | \ #define CONFIG_POST (CFG_POST_MEMORY | \
@ -343,15 +349,12 @@
#define CONFIG_SUPPORT_VFAT #define CONFIG_SUPPORT_VFAT
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*----------------------------------------------------------------------- /*-----------------------------------------------------------------------
* Miscellaneous configurable options * Miscellaneous configurable options
*----------------------------------------------------------------------*/ *----------------------------------------------------------------------*/
#define CFG_LONGHELP /* undef to save memory */ #define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB) #if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else #else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@ -441,7 +444,7 @@
*----------------------------------------------------------------------*/ *----------------------------------------------------------------------*/
#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */ #define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */ #define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB) #if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif #endif
@ -453,7 +456,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */ #define BOOTFLAG_WARM 0x02 /* Software reboot */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB) #if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif #endif

14
include/configs/shannon.h
Unescape View File

@ -66,21 +66,19 @@
#define CONFIG_BAUDRATE 115200 #define CONFIG_BAUDRATE 115200
#if 0 /* XXX - cannot test IDE anyway, so disabled for now - wd */
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
CFG_CMD_PCMCIA | \
CFG_CMD_IDE)
#endif /* 0 */
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ /*
#include <cmd_confdefs.h> * Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,115200" #define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,115200"
#define CONFIG_NETMASK 255.255.0.0 #define CONFIG_NETMASK 255.255.0.0
#define CONFIG_BOOTCOMMAND "help" #define CONFIG_BOOTCOMMAND "help"
#if (CONFIG_COMMANDS & CFG_CMD_KGDB) #if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif #endif

29
include/configs/smdk2400.h
Unescape View File

@ -86,24 +86,23 @@
/* Use s3c2400's RTC */ /* Use s3c2400's RTC */
#define CONFIG_RTC_S3C24X0 1 #define CONFIG_RTC_S3C24X0 1
#ifndef USE_920T_MMU
#define CONFIG_COMMANDS_tmp ((CONFIG_CMD_DFL & ~CFG_CMD_CACHE) | \ /*
CFG_CMD_DATE | \ * Command line configuration.
CFG_CMD_SNTP ) */
#else #include <config_cmd_default.h>
#define CONFIG_COMMANDS_tmp (CONFIG_CMD_DFL | \
CFG_CMD_DATE | \ #define CONFIG_CMD_DATE
CFG_CMD_SNTP ) #define CONFIG_CMD_SNTP
#if defined(CONFIG_HWFLOW)
#define CONFIG_CONFIG_HWFLOW
#endif #endif
#ifdef CONFIG_HWFLOW #if !defined(USE_920T_MMU)
#define CONFIG_COMMANDS (CONFIG_COMMANDS_tmp | CFG_CMD_HWFLOW) #undef CONFIG_CMD_CACHE
#else
#define CONFIG_COMMANDS CONFIG_COMMANDS_tmp
#endif #endif
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTDELAY 3
#if 0 #if 0
@ -118,7 +117,7 @@
#define CONFIG_BOOTCOMMAND "tftp; bootm" #define CONFIG_BOOTCOMMAND "tftp; bootm"
#endif #endif
#if (CONFIG_COMMANDS & CFG_CMD_KGDB) #if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
/* what's this ? it's not used anywhere */ /* what's this ? it's not used anywhere */
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */

29
include/configs/smdk2410.h
Unescape View File

@ -72,22 +72,17 @@
#define CONFIG_BAUDRATE 115200 #define CONFIG_BAUDRATE 115200
/***********************************************************
* Command definition /*
***********************************************************/ * Command line configuration.
#define CONFIG_COMMANDS \ */
(CONFIG_CMD_DFL | \ #include <config_cmd_default.h>
CFG_CMD_CACHE | \
/*CFG_CMD_NAND |*/ \ #define CONFIG_CMD_CACHE
/*CFG_CMD_EEPROM |*/ \ #define CONFIG_CMD_REGINFO
/*CFG_CMD_I2C |*/ \ #define CONFIG_CMD_DATE
/*CFG_CMD_USB |*/ \ #define CONFIG_CMD_ELF
CFG_CMD_REGINFO | \
CFG_CMD_DATE | \
CFG_CMD_ELF)
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTDELAY 3
/*#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600" */ /*#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600" */
@ -98,7 +93,7 @@
/*#define CONFIG_BOOTFILE "elinos-lart" */ /*#define CONFIG_BOOTFILE "elinos-lart" */
/*#define CONFIG_BOOTCOMMAND "tftp; bootm" */ /*#define CONFIG_BOOTCOMMAND "tftp; bootm" */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB) #if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
/* what's this ? it's not used anywhere */ /* what's this ? it's not used anywhere */
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */

47
include/configs/smmaco4.h
Unescape View File

@ -42,11 +42,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */ #define BOOTFLAG_WARM 0x02 /* Software reboot */
#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
/* /*
* Serial console configuration * Serial console configuration
*/ */
@ -72,26 +67,25 @@
#define CFG_CMD_POST_DIAG 0 #define CFG_CMD_POST_DIAG 0
#endif #endif
/* /*
* Supported commands * Command line configuration.
*/ */
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ #include <config_cmd_default.h>
CFG_CMD_ASKENV | \ #define CONFIG_CMD_ASKENV
CFG_CMD_DATE | \ #define CONFIG_CMD_DATE
CFG_CMD_DHCP | \ #define CONFIG_CMD_DHCP
CFG_CMD_ECHO | \ #define CONFIG_CMD_ECHO
CFG_CMD_EEPROM | \ #define CONFIG_CMD_EEPROM
CFG_CMD_I2C | \ #define CONFIG_CMD_I2C
CFG_CMD_JFFS2 | \ #define CONFIG_CMD_JFFS2
CFG_CMD_MII | \ #define CONFIG_CMD_MII
CFG_CMD_NFS | \ #define CONFIG_CMD_NFS
CFG_CMD_PING | \ #define CONFIG_CMD_PING
CFG_CMD_POST_DIAG | \ #define CONFIG_CMD_POST
CFG_CMD_REGINFO | \ #define CONFIG_CMD_REGINFO
CFG_CMD_SNTP ) #define CONFIG_CMD_SNTP
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
#define CONFIG_TIMESTAMP /* display image timestamps */ #define CONFIG_TIMESTAMP /* display image timestamps */
@ -319,7 +313,7 @@
*/ */
#define CFG_LONGHELP /* undef to save memory */ #define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB) #if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else #else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@ -338,6 +332,11 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
/* /*
* Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
* which is normally part of the default commands (CFV_CMD_DFL) * which is normally part of the default commands (CFV_CMD_DFL)

53
include/configs/sorcery.h
Unescape View File

@ -39,12 +39,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */ #define BOOTFLAG_WARM 0x02 /* Software reboot */
#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
/* /*
* Serial console configuration * Serial console configuration
*/ */
@ -69,30 +63,26 @@
#define CONFIG_PCI_CFG_PHYS CONFIG_PCI_CFG_BUS #define CONFIG_PCI_CFG_PHYS CONFIG_PCI_CFG_BUS
#define CONFIG_PCI_CFG_SIZE 0x01000000 #define CONFIG_PCI_CFG_SIZE 0x01000000
/* /*
* Supported commands * Command line configuration.
*/ */
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ #include <config_cmd_default.h>
CFG_CMD_BOOTD | \
CFG_CMD_CACHE | \ #define CONFIG_CMD_BOOTD
CFG_CMD_DHCP | \ #define CONFIG_CMD_CACHE
CFG_CMD_DIAG | \ #define CONFIG_CMD_DHCP
CFG_CMD_ELF | \ #define CONFIG_CMD_DIAG
CFG_CMD_I2C | \ #define CONFIG_CMD_ELF
CFG_CMD_NET | \ #define CONFIG_CMD_I2C
CFG_CMD_NFS | \ #define CONFIG_CMD_NET
CFG_CMD_PCI | \ #define CONFIG_CMD_NFS
CFG_CMD_PING | \ #define CONFIG_CMD_PCI
CFG_CMD_REGINFO | \ #define CONFIG_CMD_PING
CFG_CMD_SDRAM | \ #define CONFIG_CMD_REGINFO
CFG_CMD_SNTP | \ #define CONFIG_CMD_SDRAM
0) #define CONFIG_CMD_SNTP
/* CFG_CMD_MII | \ */
/* CFG_CMD_USB | \ */
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/* /*
* Default Environment * Default Environment
@ -268,7 +258,7 @@
*/ */
#define CFG_LONGHELP /* undef to save memory */ #define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB) #if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else #else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@ -284,6 +274,11 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */
#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
/* /*
* Various low-level settings * Various low-level settings
*/ */

34
include/configs/spc1920.h
Unescape View File

@ -80,24 +80,24 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */ #undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_BZIP2 /* include support for bzip2 compressed images */ #define CONFIG_BZIP2 /* include support for bzip2 compressed images */
#ifndef CONFIG_COMMANDS
#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
| CFG_CMD_ASKENV \
| CFG_CMD_DATE \
| CFG_CMD_ECHO \
| CFG_CMD_IMMAP \
| CFG_CMD_JFFS2 \
| CFG_CMD_PING \
| CFG_CMD_DHCP \
| CFG_CMD_I2C \
| CFG_CMD_MII)
/* & ~( CFG_CMD_NET)) */
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DATE
#define CONFIG_CMD_ECHO
#define CONFIG_CMD_IMMAP
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
#endif /* !CONFIG_COMMANDS */ #undef CONFIG_CMD_NET
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/* /*
* Miscellaneous configurable options * Miscellaneous configurable options
@ -107,7 +107,7 @@
#define CFG_HUSH_PARSER #define CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> " #define CFG_PROMPT_HUSH_PS2 "> "
#if (CONFIG_COMMANDS & CFG_CMD_KGDB) #if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else #else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@ -202,7 +202,7 @@
/*----------------------------------------------------------------------- /*-----------------------------------------------------------------------
* I2C configuration * I2C configuration
*/ */
#if (CONFIG_COMMANDS & CFG_CMD_I2C) #if defined(CONFIG_CMD_I2C)
/* enable I2C and select the hardware/software driver */ /* enable I2C and select the hardware/software driver */
#undef CONFIG_HARD_I2C /* I2C with hardware support */ #undef CONFIG_HARD_I2C /* I2C with hardware support */
#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ #define CONFIG_SOFT_I2C 1 /* I2C bit-banged */

89
include/configs/spieval.h
Unescape View File

@ -44,11 +44,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */ #define BOOTFLAG_WARM 0x02 /* Software reboot */
#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
/* /*
* Serial console configuration * Serial console configuration
*/ */
@ -88,12 +83,6 @@
#define CONFIG_NS8382X 1 #define CONFIG_NS8382X 1
#endif /* CONFIG_STK52XX */ #endif /* CONFIG_STK52XX */
#ifdef CONFIG_PCI
#define ADD_PCI_CMD CFG_CMD_PCI
#else
#define ADD_PCI_CMD 0
#endif
/* /*
* Video console * Video console
*/ */
@ -110,12 +99,6 @@
#define CFG_CONSOLE_IS_IN_ENV #define CFG_CONSOLE_IS_IN_ENV
#endif #endif
#ifdef CONFIG_VIDEO
#define ADD_BMP_CMD CFG_CMD_BMP
#else
#define ADD_BMP_CMD 0
#endif
/* Partitions */ /* Partitions */
#define CONFIG_MAC_PARTITION #define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION #define CONFIG_DOS_PARTITION
@ -124,10 +107,7 @@
/* USB */ /* USB */
#ifdef CONFIG_STK52XX #ifdef CONFIG_STK52XX
#define CONFIG_USB_OHCI #define CONFIG_USB_OHCI
#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
#define CONFIG_USB_STORAGE #define CONFIG_USB_STORAGE
#else
#define ADD_USB_CMD 0
#endif #endif
/* POST support */ /* POST support */
@ -143,36 +123,44 @@
#define CFG_CMD_POST_DIAG 0 #define CFG_CMD_POST_DIAG 0
#endif #endif
/* IDE */
#if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX)
#define ADD_IDE_CMD (CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2)
#else
#define ADD_IDE_CMD 0
#endif
/* /*
* Supported commands * Command line configuration.
*/ */
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ #include <config_cmd_default.h>
ADD_BMP_CMD | \
ADD_IDE_CMD | \ #if defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX)
ADD_PCI_CMD | \ #define CONFIG_CMD_IDE
ADD_USB_CMD | \ #define CONFIG_CMD_FAT
CFG_CMD_ASKENV | \ #define CONFIG_CMD_EXT2
CFG_CMD_DATE | \ #endif
CFG_CMD_DHCP | \
CFG_CMD_ECHO | \ #ifdef CONFIG_STK52XX
CFG_CMD_EEPROM | \ #define CONFIG_CMD_USB
CFG_CMD_I2C | \ #define CONFIG_CMD_FAT
CFG_CMD_MII | \ #endif
CFG_CMD_NFS | \
CFG_CMD_PING | \ #ifdef CONFIG_VIDEO
CFG_CMD_POST_DIAG | \ #define CONFIG_CMD_BMP
CFG_CMD_REGINFO | \ #endif
CFG_CMD_SNTP )
#ifdef CONFIG_PCI
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #define CONFIG_CMD_PCI
#include <cmd_confdefs.h> #endif
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ECHO
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PING
#define CONFIG_CMD_POST
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SNTP
#define CONFIG_TIMESTAMP /* display image timestamps */ #define CONFIG_TIMESTAMP /* display image timestamps */
@ -406,7 +394,7 @@
*/ */
#define CFG_LONGHELP /* undef to save memory */ #define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB) #if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else #else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@ -425,6 +413,11 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
/* /*
* Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
* which is normally part of the default commands (CFV_CMD_DFL) * which is normally part of the default commands (CFV_CMD_DFL)

8
include/configs/suzaku.h
Unescape View File

@ -55,10 +55,12 @@
#define MICROBLAZE_SYSREG_BASE_ADDR 0xFFFFA000 #define MICROBLAZE_SYSREG_BASE_ADDR 0xFFFFA000
#define MICROBLAZE_SYSREG_RECONFIGURE (1 << 0) #define MICROBLAZE_SYSREG_RECONFIGURE (1 << 0)
#define CONFIG_COMMANDS (CONFIG__CMD_DFL)
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ /*
#include <cmd_confdefs.h> * Command line configuration.
*/
#include <config_cmd_default.h>
#define CFG_UART1_BASE (0xFFFF2000) #define CFG_UART1_BASE (0xFFFF2000)
#define CONFIG_SERIAL_BASE CFG_UART1_BASE #define CONFIG_SERIAL_BASE CFG_UART1_BASE

25
include/configs/svm_sc8xx.h
Unescape View File

@ -132,15 +132,18 @@
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \ /*
CFG_CMD_DHCP | \ * Command line configuration.
CFG_CMD_DOC | \ */
/* CFG_CMD_IDE |*/ \ #include <config_cmd_default.h>
CFG_CMD_DATE )
#define CONFIG_CMD_ASKENV
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #define CONFIG_CMD_DHCP
#include <cmd_confdefs.h> #define CONFIG_CMD_DOC
#define CONFIG_CMD_DATE
#define CFG_NAND_LEGACY #define CFG_NAND_LEGACY
/* /*
@ -153,7 +156,7 @@
#define CFG_PROMPT_HUSH_PS2 "> " #define CFG_PROMPT_HUSH_PS2 "> "
#endif #endif
#if (CONFIG_COMMANDS & CFG_CMD_KGDB) #if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else #else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@ -246,7 +249,7 @@
* Cache Configuration * Cache Configuration
*/ */
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB) #if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif #endif

Write Preview
Loading…
Cancel
Save