Add a README file to explain how to build and flash the SD card for Udoo boards. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>master
parent
27192d16eb
commit
5b0d03b306
@ -0,0 +1,21 @@ |
||||
How to use U-Boot on MX6Q/DL Udoo boards |
||||
---------------------------------------- |
||||
|
||||
- Build U-Boot for MX6Q/DL Udoo boards: |
||||
|
||||
$ make mrproper |
||||
$ make udoo_defconfig |
||||
$ make |
||||
|
||||
This will generate the SPL image called SPL and the u-boot.img. |
||||
|
||||
- Flash the SPL image into the SD card: |
||||
|
||||
sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync |
||||
|
||||
- Flash the u-boot.img image into the SD card: |
||||
|
||||
sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync |
||||
|
||||
- Insert the SD card in the board, power it up and U-Boot messages should |
||||
come up. |
Loading…
Reference in new issue