Patches by Scott McNutt, 24 Aug 2004:

- Add support for Altera Nios-II processors.
- Add support for Psyent PCI-5441 board.
- Add support for Psyent PK1C20 board.

CHANGELOG

@@ -2,6 +2,11 @@
 Changes since U-Boot 1.1.1:
 ======================================================================
 
+* Patches by Scott McNutt, 24 Aug 2004:
+  - Add support for Altera Nios-II processors.
+  - Add support for Psyent PCI-5441 board.
+  - Add support for Psyent PK1C20 board.
+
 * Patches by Jon Loeliger, 24 Aug 2004:
   - Add support for the MPC8541 and MPC8555 CDS boards
   - Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR

CREDITS

@@ -286,7 +286,10 @@ D: Support for Samsung ARM920T SMDK2410 eval board
 
 N: Scott McNutt
 E: smcnutt@psyent.com
-D: Support for Altera Nios-32 CPU, for Nios Cyclone Development Kit (DK-1C20)
+D: Support for Altera Nios-32 CPU
+D: Support for Altera Nios-II CPU
+D: Support for Nios Cyclone Development Kit (DK-1C20)
+W: http://www.psyent.com
 
 N: Rolf Offermanns
 E: rof@sysgo.de

MAINTAINERS

@@ -431,6 +431,18 @@ Scott McNutt <smcnutt@psyent.com>
 	DK1C20			Nios-32
 
 #########################################################################
+# Nios-II Systems:							#
+#									#
+# Maintainer Name, Email Address					#
+#	Board			CPU					#
+#########################################################################
+
+Scott McNutt <smcnutt@psyent.com>
+
+	PCI5441			Nios-II
+	PK1C20			Nios-II
+
+#########################################################################
 # MicroBlaze Systems:							#
 #									#
 # Maintainer Name, Email Address					#

MAKEALL

@@ -195,6 +195,12 @@ LIST_nios="	\
 "
 
 #########################################################################
+## Nios-II Systems
+#########################################################################
+
+LIST_nios2="PCI5441 PK1C20"
+
+#########################################################################
 ## MicroBlaze Systems
 #########################################################################
 
@@ -226,7 +232,7 @@ do
 	arm|SA|ARM7|ARM9|pxa|ixp| \
 	microblaze| \
 	mips| \
-	nios| \
+	nios|nios2| \
 	x86|I486)
 			for target in `eval echo '$LIST_'${arg}`
 			do

Makefile

@@ -72,6 +72,9 @@ endif
 ifeq ($(ARCH),nios)
 CROSS_COMPILE = nios-elf-
 endif
+ifeq ($(ARCH),nios2)
+CROSS_COMPILE = nios2-elf-
+endif
 ifeq ($(ARCH),m68k)
 CROSS_COMPILE = m68k-elf-
 endif
@@ -1477,6 +1480,15 @@ ADNPESC1_config: unconfig
 		}
 	@./mkconfig -a ADNPESC1 nios nios adnpesc1 ssv
 
+#########################################################################
+## Nios-II
+#########################################################################
+
+PK1C20_config : unconfig
+	@./mkconfig  PK1C20 nios2 nios2 pk1c20 psyent
+
+PCI5441_config : unconfig
+	@./mkconfig  PCI5441 nios2 nios2 pci5441 psyent
 
 #========================================================================
 # MicroBlaze

README

@@ -141,6 +141,7 @@ Directory Hierarchy:
   - mpc8260	Files specific to Motorola MPC8260 CPUs
   - mpc85xx	Files specific to Motorola MPC85xx CPUs
   - nios	Files specific to Altera NIOS CPUs
+  - nios2	Files specific to Altera Nios-II CPUs
   - ppc4xx	Files specific to IBM PowerPC 4xx CPUs
   - pxa		Files specific to Intel XScale PXA CPUs
   - s3c44b0	Files specific to Samsung S3C44B0 CPUs
@@ -246,6 +247,10 @@ The following options need to be configured:
 		----------------------
 		CONFIG_MICROBLAZE
 
+		Nios-2 based CPUs:
+		----------------------
+		CONFIG_NIOS2
+
 
 - Board Type:	Define exactly one of
 
@@ -306,6 +311,11 @@ The following options need to be configured:
 
 		CONFIG_SUZAKU
 
+		Nios-2 based boards:
+		------------------------
+
+		CONFIG_PCI5441 CONFIG_PK1C20
+
 
 - CPU Module Type: (if CONFIG_COGENT is defined)
 		Define exactly one of

board/cds/mpc8541cds/mpc8541cds.c

@@ -22,7 +22,6 @@
  * MA 02111-1307 USA
  */
 
-
 #include <common.h>
 #include <pci.h>
 #include <asm/processor.h>
@@ -41,65 +40,55 @@ extern long int spd_sdram(void);
 void local_bus_init(void);
 void sdram_init(void);
 
-
+int board_early_init_f (void)
-
-int
-board_early_init_f(void)
 {
-    return 0;
+	return 0;
 }
 
-
+int checkboard (void)
-int
-checkboard(void)
 {
-    volatile immap_t *immap = (immap_t *)CFG_CCSRBAR;
+	volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
-    volatile ccsr_gur_t *gur = &immap->im_gur;
+	volatile ccsr_gur_t *gur = &immap->im_gur;
-
+
-    /* PCI slot in USER bits CSR[6:7] by convention. */
+	/* PCI slot in USER bits CSR[6:7] by convention. */
-    uint pci_slot = get_pci_slot();
+	uint pci_slot = get_pci_slot ();
-
-    uint pci_dual = get_pci_dual();		/* PCI DUAL in CM_PCI[3] */
-    uint pci1_32 = gur->pordevsr & 0x10000;	/* PORDEVSR[15] */
-    uint pci1_clk_sel = gur->porpllsr & 0x8000; /* PORPLLSR[16] */
-    uint pci2_clk_sel = gur->porpllsr & 0x4000; /* PORPLLSR[17] */
-
-    uint pci1_speed = get_clock_freq();		/* PCI PSPEED in [4:5] */
-
-    uint cpu_board_rev = get_cpu_board_revision();
-
-    printf("Board: CDS Version 0x%02x, PCI Slot %d\n",
-	   get_board_version(),
-	   pci_slot);
-
-    printf("CPU Board Revision %d.%d (0x%04x)\n",
-	   MPC85XX_CPU_BOARD_MAJOR(cpu_board_rev),
-	   MPC85XX_CPU_BOARD_MINOR(cpu_board_rev),
-	   cpu_board_rev);
-
-    printf("    PCI1: %d bit, %s MHz, %s\n",
-	   (pci1_32) ? 32 : 64,
-	   (pci1_speed == 33000000) ? "33" :
-	   (pci1_speed == 66000000) ? "66" : "unknown",
-	   pci1_clk_sel ? "sync" : "async"
-	   );
-
-    if (pci_dual) {
-	printf("    PCI2: 32 bit, 66 MHz, %s\n",
-	       pci2_clk_sel ? "sync" : "async"
-	       );
-    } else {
-	printf("    PCI2: disabled\n");
-    }
-
-    /*
-     * Initialize local bus.
-     */
-    local_bus_init();
-
-    return 0;
-}
 
+	uint pci_dual = get_pci_dual ();	/* PCI DUAL in CM_PCI[3] */
+	uint pci1_32 = gur->pordevsr & 0x10000;	/* PORDEVSR[15] */
+	uint pci1_clk_sel = gur->porpllsr & 0x8000;	/* PORPLLSR[16] */
+	uint pci2_clk_sel = gur->porpllsr & 0x4000;	/* PORPLLSR[17] */
+
+	uint pci1_speed = get_clock_freq ();	/* PCI PSPEED in [4:5] */
+
+	uint cpu_board_rev = get_cpu_board_revision ();
+
+	printf ("Board: CDS Version 0x%02x, PCI Slot %d\n",
+		get_board_version (), pci_slot);
+
+	printf ("CPU Board Revision %d.%d (0x%04x)\n",
+		MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev),
+		MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev);
+
+	printf ("    PCI1: %d bit, %s MHz, %s\n",
+		(pci1_32) ? 32 : 64,
+		(pci1_speed == 33000000) ? "33" :
+		(pci1_speed == 66000000) ? "66" : "unknown",
+		pci1_clk_sel ? "sync" : "async");
+
+	if (pci_dual) {
+		printf ("    PCI2: 32 bit, 66 MHz, %s\n",
+			pci2_clk_sel ? "sync" : "async");
+	} else {
+		printf ("    PCI2: disabled\n");
+	}
+
+	/*
+	 * Initialize local bus.
+	 */
+	local_bus_init ();
+
+	return 0;
+}
 
 long int
 initdram(int board_type)
@@ -125,18 +114,14 @@ initdram(int board_type)
 		udelay(200);
 	}
 #endif
-
 	dram_size = spd_sdram();
 
-
 #if defined(CONFIG_DDR_ECC)
 	/*
 	 * Initialize and enable DDR ECC.
 	 */
 	ddr_enable_ecc(dram_size);
 #endif
-
-
 	/*
 	 * SDRAM Initialization
 	 */
@@ -146,11 +131,9 @@ initdram(int board_type)
 	return dram_size;
 }
 
-
 /*
  * Initialize Local Bus
  */
-
 void
 local_bus_init(void)
 {
@@ -196,11 +179,9 @@ local_bus_init(void)
 	}
 }
 
-
 /*
  * Initialize SDRAM memory on the Local Bus.
  */
-
 void
 sdram_init(void)
 {
@@ -292,7 +273,6 @@ sdram_init(void)
 #endif	/* enable SDRAM init */
 }
 
-
 #if defined(CFG_DRAM_TEST)
 int
 testdram(void)
@@ -332,8 +312,6 @@ testdram(void)
 }
 #endif
 
-
-
 #if defined(CONFIG_PCI)
 
 /*
@@ -352,7 +330,6 @@ static struct pci_config_table pci_mpc85xxcds_config_table[] = {
 };
 #endif
 
-
 static struct pci_controller hose = {
 #ifndef CONFIG_PCI_PNP
 	config_table: pci_mpc85xxcds_config_table,
@@ -361,7 +338,6 @@ static struct pci_controller hose = {
 
 #endif	/* CONFIG_PCI */
 
-
 void
 pci_init_board(void)
 {

board/cds/mpc8555cds/mpc8555cds.c

@@ -20,7 +20,6 @@
  * MA 02111-1307 USA
  */
 
-
 #include <common.h>
 #include <pci.h>
 #include <asm/processor.h>
@@ -39,65 +38,55 @@ extern long int spd_sdram(void);
 void local_bus_init(void);
 void sdram_init(void);
 
-
+int board_early_init_f (void)
-
-int
-board_early_init_f(void)
 {
-    return 0;
+	return 0;
 }
 
-
+int checkboard (void)
-int
-checkboard(void)
 {
-    volatile immap_t *immap = (immap_t *)CFG_CCSRBAR;
+	volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
-    volatile ccsr_gur_t *gur = &immap->im_gur;
+	volatile ccsr_gur_t *gur = &immap->im_gur;
-
+
-    /* PCI slot in USER bits CSR[6:7] by convention. */
+	/* PCI slot in USER bits CSR[6:7] by convention. */
-    uint pci_slot = get_pci_slot();
+	uint pci_slot = get_pci_slot ();
-
+
-    uint pci_dual = get_pci_dual();		/* PCI DUAL in CM_PCI[3] */
+	uint pci_dual = get_pci_dual ();	/* PCI DUAL in CM_PCI[3] */
-    uint pci1_32 = gur->pordevsr & 0x10000;	/* PORDEVSR[15] */
+	uint pci1_32 = gur->pordevsr & 0x10000;	/* PORDEVSR[15] */
-    uint pci1_clk_sel = gur->porpllsr & 0x8000; /* PORPLLSR[16] */
+	uint pci1_clk_sel = gur->porpllsr & 0x8000;	/* PORPLLSR[16] */
-    uint pci2_clk_sel = gur->porpllsr & 0x4000; /* PORPLLSR[17] */
+	uint pci2_clk_sel = gur->porpllsr & 0x4000;	/* PORPLLSR[17] */
-
+
-    uint pci1_speed = get_clock_freq();		/* PCI PSPEED in [4:5] */
+	uint pci1_speed = get_clock_freq ();	/* PCI PSPEED in [4:5] */
-
+
-    uint cpu_board_rev = get_cpu_board_revision();
+	uint cpu_board_rev = get_cpu_board_revision ();
-
+
-    printf("Board: CDS Version 0x%02x, PCI Slot %d\n",
+	printf ("Board: CDS Version 0x%02x, PCI Slot %d\n",
-	   get_board_version(),
+		get_board_version (), pci_slot);
-	   pci_slot);
+
-
+	printf ("CPU Board Revision %d.%d (0x%04x)\n",
-    printf("CPU Board Revision %d.%d (0x%04x)\n",
+		MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev),
-	   MPC85XX_CPU_BOARD_MAJOR(cpu_board_rev),
+		MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev);
-	   MPC85XX_CPU_BOARD_MINOR(cpu_board_rev),
+
-	   cpu_board_rev);
+	printf ("    PCI1: %d bit, %s MHz, %s\n",
-
+		(pci1_32) ? 32 : 64,
-    printf("    PCI1: %d bit, %s MHz, %s\n",
+		(pci1_speed == 33000000) ? "33" :
-	   (pci1_32) ? 32 : 64,
+		(pci1_speed == 66000000) ? "66" : "unknown",
-	   (pci1_speed == 33000000) ? "33" :
+		pci1_clk_sel ? "sync" : "async");
-	   (pci1_speed == 66000000) ? "66" : "unknown",
+
-	   pci1_clk_sel ? "sync" : "async"
+	if (pci_dual) {
-	   );
+		printf ("    PCI2: 32 bit, 66 MHz, %s\n",
-
+			pci2_clk_sel ? "sync" : "async");
-    if (pci_dual) {
+	} else {
-	printf("    PCI2: 32 bit, 66 MHz, %s\n",
+		printf ("    PCI2: disabled\n");
-	       pci2_clk_sel ? "sync" : "async"
+	}
-	       );
-    } else {
-	printf("    PCI2: disabled\n");
-    }
-
-    /*
-     * Initialize local bus.
-     */
-    local_bus_init();
-
-    return 0;
-}
 
+	/*
+	 * Initialize local bus.
+	 */
+	local_bus_init ();
+
+	return 0;
+}
 
 long int
 initdram(int board_type)
@@ -123,18 +112,14 @@ initdram(int board_type)
 		udelay(200);
 	}
 #endif
-
 	dram_size = spd_sdram();
 
-
 #if defined(CONFIG_DDR_ECC)
 	/*
 	 * Initialize and enable DDR ECC.
 	 */
 	ddr_enable_ecc(dram_size);
 #endif
-
-
 	/*
 	 * SDRAM Initialization
 	 */
@@ -144,11 +129,9 @@ initdram(int board_type)
 	return dram_size;
 }
 
-
 /*
  * Initialize Local Bus
  */
-
 void
 local_bus_init(void)
 {
@@ -194,11 +177,9 @@ local_bus_init(void)
 	}
 }
 
-
 /*
  * Initialize SDRAM memory on the Local Bus.
  */
-
 void
 sdram_init(void)
 {
@@ -227,7 +208,6 @@ sdram_init(void)
 	lbc->lbcr = CFG_LBC_LBCR;
 	asm("msync");
 
-
 	lbc->lsrt = CFG_LBC_LSRT;
 	lbc->mrtpr = CFG_LBC_MRTPR;
 	asm("msync");
@@ -290,7 +270,6 @@ sdram_init(void)
 #endif	/* enable SDRAM init */
 }
 
-
 #if defined(CFG_DRAM_TEST)
 int
 testdram(void)
@@ -330,8 +309,6 @@ testdram(void)
 }
 #endif
 
-
-
 #if defined(CONFIG_PCI)
 
 /*
@@ -350,7 +327,6 @@ static struct pci_config_table pci_mpc85xxcds_config_table[] = {
 };
 #endif
 
-
 static struct pci_controller hose = {
 #ifndef CONFIG_PCI_PNP
 	config_table: pci_mpc85xxcds_config_table,
@@ -359,7 +335,6 @@ static struct pci_controller hose = {
 
 #endif	/* CONFIG_PCI */
 
-
 void
 pci_init_board(void)
 {

board/psyent/common/AMDLV065D.c

@@ -0,0 +1,197 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#if defined(CONFIG_NIOS)
+#include <nios.h>
+#else
+#include <nios2.h>
+#endif
+
+#define SECTSZ		(64 * 1024)
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+/*----------------------------------------------------------------------*/
+unsigned long flash_init (void)
+{
+	int i;
+	unsigned long addr;
+	flash_info_t *fli = &flash_info[0];
+
+	fli->size = CFG_FLASH_SIZE;
+	fli->sector_count = CFG_MAX_FLASH_SECT;
+	fli->flash_id = FLASH_MAN_AMD + FLASH_AMDLV065D;
+
+	addr = CFG_FLASH_BASE;
+	for (i = 0; i < fli->sector_count; ++i) {
+		fli->start[i] = addr;
+		addr += SECTSZ;
+		fli->protect[i] = 1;
+	}
+
+	return (CFG_FLASH_SIZE);
+}
+/*--------------------------------------------------------------------*/
+void flash_print_info (flash_info_t * info)
+{
+	int i, k;
+	unsigned long size;
+	int erased;
+	volatile unsigned char *flash;
+
+	printf ("  Size: %ld KB in %d Sectors\n",
+		info->size >> 10, info->sector_count);
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; ++i) {
+
+		/* Check if whole sector is erased */
+		if (i != (info->sector_count - 1))
+			size = info->start[i + 1] - info->start[i];
+		else
+			size = info->start[0] + info->size - info->start[i];
+		erased = 1;
+		flash = (volatile unsigned char *) CACHE_BYPASS(info->start[i]);
+		for (k = 0; k < size; k++) {
+			if (*flash++ != 0xff) {
+				erased = 0;
+				break;
+			}
+		}
+
+		/* Print the info */
+		if ((i % 5) == 0)
+			printf ("\n   ");
+		printf (" %08lX%s%s",
+			CACHE_NO_BYPASS(info->start[i]),
+			erased ? " E" : "  ",
+			info->protect[i] ? "RO " : "   ");
+	}
+	printf ("\n");
+}
+
+/*-------------------------------------------------------------------*/
+
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+	volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *)
+		CACHE_BYPASS(info->start[0]);
+	volatile CFG_FLASH_WORD_SIZE *addr2;
+	int prot, sect;
+	ulong start;
+
+	/* Some sanity checking */
+	if ((s_first < 0) || (s_first > s_last)) {
+		printf ("- no sectors to erase\n");
+		return 1;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+	/* It's ok to erase multiple sectors provided we don't delay more
+	 * than 50 usec between cmds ... at which point the erase time-out
+	 * occurs. So don't go and put printf() calls in the loop ... it
+	 * won't be very helpful ;-)
+	 */
+	for (sect = s_first; sect <= s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			addr2 = (CFG_FLASH_WORD_SIZE *)
+				CACHE_BYPASS((info->start[sect]));
+			*addr = 0xaa;
+			*addr = 0x55;
+			*addr = 0x80;
+			*addr = 0xaa;
+			*addr = 0x55;
+			*addr2 = 0x30;
+			/* Now just wait for 0xff & provide some user
+			 * feedback while we wait.
+			 */
+			start = get_timer (0);
+			while (*addr2 != 0xff) {
+				udelay (1000 * 1000);
+				putc ('.');
+				if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
+					printf ("timeout\n");
+					return 1;
+				}
+			}
+		}
+	}
+	printf ("\n");
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+
+	vu_char *cmd = (vu_char *) CACHE_BYPASS(info->start[0]);
+	vu_char *dst = (vu_char *) CACHE_BYPASS(addr);
+	unsigned char b;
+	ulong start;
+
+	while (cnt) {
+		/* Check for sufficient erase */
+		b = *src;
+		if ((*dst & b) != b) {
+			printf ("%02x : %02x\n", *dst, b);
+			return (2);
+		}
+
+		*cmd = 0xaa;
+		*cmd = 0x55;
+		*cmd = 0xa0;
+		*dst = b;
+
+		/* Verify write */
+		start = get_timer (0);
+		while (*dst != b) {
+			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+				return 1;
+			}
+		}
+		dst++;
+		src++;
+		cnt--;
+	}
+
+	return (0);
+}

board/psyent/pci5441/Makefile

@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2001-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+COMOBJS := ../common/AMDLV065D.o
+
+OBJS	:= $(BOARD).o $(COMOBJS)
+
+SOBJS	=
+
+$(LIB): $(OBJS) $(SOBJS)
+	$(AR) crv $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################

board/psyent/pci5441/config.mk

@@ -0,0 +1,31 @@
+#
+# (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+# Scott McNutt <smcnutt@psyent.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0x018e0000
+
+PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul
+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif

board/psyent/pci5441/pci5441.c

@@ -0,0 +1,40 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+int board_early_init_f (void)
+{
+	return 0;
+}
+
+int checkboard (void)
+{
+	puts ("BOARD : Psyent PCI-5441\n");
+	return 0;
+}
+
+long int initdram (int board_type)
+{
+	return (0);
+}

board/psyent/pci5441/u-boot.lds

@@ -0,0 +1,136 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+OUTPUT_FORMAT("elf32-littlenios2")
+OUTPUT_ARCH(nios2)
+ENTRY(_start)
+
+SECTIONS
+{
+	.text :
+	{
+	  cpu/nios2/start.o (.text)
+	  *(.text)
+	  *(.text.*)
+	  *(.gnu.linkonce.t*)
+	  *(.rodata)
+	  *(.rodata.*)
+	  *(.gnu.linkonce.r*)
+	}
+	. = ALIGN (4);
+	_etext = .;
+	PROVIDE (etext = .);
+
+	/* CMD TABLE - sandwich this in between text and data so
+	 * the initialization code relocates the command table as
+	 * well -- admittedly, this is just pure laziness ;-)
+	 */
+	__u_boot_cmd_start = .;
+	.u_boot_cmd :
+	{
+	  *(.u_boot_cmd)
+	}
+	. = ALIGN(4);
+	__u_boot_cmd_end = .;
+
+	/* INIT DATA sections - "Small" data (see the gcc -G option)
+	 * is always gp-relative. Here we make all init data sections
+	 * adjacent to simplify the startup code -- and provide
+	 * the global pointer for gp-relative access.
+	 */
+	_data = .;
+	.data :
+	{
+	  *(.data)
+	  *(.data.*)
+	  *(.gnu.linkonce.d*)
+	}
+
+	. = ALIGN(16);
+	_gp = .;			/* Global pointer addr */
+	PROVIDE (gp = .);
+
+	.sdata :
+	{
+	  *(.sdata)
+	  *(.sdata.*)
+	  *(.gnu.linkonce.s.*)
+	}
+	. = ALIGN(4);
+
+	_edata = .;
+	PROVIDE (edata = .);
+
+	/* UNINIT DATA - Small uninitialized data is first so it's
+	 * adjacent to sdata and can be referenced via gp. The normal
+	 * bss follows. We keep it adjacent to simplify init code.
+	 */
+	__bss_start = .;
+	.sbss :
+	{
+	  *(.sbss)
+	  *(.sbss.*)
+	  *(.gnu.linkonce.sb.*)
+	  *(.scommon)
+	}
+	. = ALIGN(4);
+	.bss :
+	{
+	  *(.bss)
+	  *(.bss.*)
+	  *(.dynbss)
+	  *(COMMON)
+	  *(.scommon)
+	}
+	. = ALIGN(4);
+	_end = .;
+	PROVIDE (end = .);
+
+	/* DEBUG -- symbol table, string table, etc. etc.
+	 */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug		0 : { *(.debug) }
+	.line		0 : { *(.line) }
+	.debug_srcinfo	0 : { *(.debug_srcinfo) }
+	.debug_sfnames	0 : { *(.debug_sfnames) }
+	.debug_aranges	0 : { *(.debug_aranges) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_info	0 : { *(.debug_info) }
+	.debug_abbrev	0 : { *(.debug_abbrev) }
+	.debug_line	0 : { *(.debug_line) }
+	.debug_frame	0 : { *(.debug_frame) }
+	.debug_str	0 : { *(.debug_str) }
+	.debug_loc	0 : { *(.debug_loc) }
+	.debug_macinfo	0 : { *(.debug_macinfo) }
+	.debug_weaknames 0 : { *(.debug_weaknames) }
+	.debug_funcnames 0 : { *(.debug_funcnames) }
+	.debug_typenames 0 : { *(.debug_typenames) }
+	.debug_varnames	 0 : { *(.debug_varnames) }
+}

board/psyent/pk1c20/Makefile

@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2001-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+COMOBJS := ../common/AMDLV065D.o
+
+OBJS	:= $(BOARD).o led.o $(COMOBJS)
+
+SOBJS	=
+
+$(LIB): $(OBJS) $(SOBJS)
+	$(AR) crv $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################

board/psyent/pk1c20/config.mk

@@ -0,0 +1,31 @@
+#
+# (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+# Scott McNutt <smcnutt@psyent.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0x018e0000
+
+PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul
+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif

board/psyent/pk1c20/led.c

@@ -0,0 +1,62 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <nios2.h>
+#include <nios2-io.h>
+#include <status_led.h>
+
+/* The LED port is configured as output only, so we
+ * must track the state manually.
+ */
+static led_id_t val = 0;
+
+void __led_init (led_id_t mask, int state)
+{
+	nios_pio_t *pio = (nios_pio_t *)CACHE_BYPASS(CFG_LEDPIO_ADDR);
+
+	if (state == STATUS_LED_ON)
+		val &= ~mask;
+	else
+		val |= mask;
+	pio->data = val;
+}
+
+void __led_set (led_id_t mask, int state)
+{
+	nios_pio_t *pio = (nios_pio_t *)CACHE_BYPASS(CFG_LEDPIO_ADDR);
+
+	if (state == STATUS_LED_ON)
+		val &= ~mask;
+	else
+		val |= mask;
+	pio->data = val;
+}
+
+void __led_toggle (led_id_t mask)
+{
+	nios_pio_t *pio = (nios_pio_t *)CACHE_BYPASS(CFG_LEDPIO_ADDR);
+
+	val ^= mask;
+	pio->data = val;
+}

board/psyent/pk1c20/pk1c20.c

@@ -0,0 +1,40 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+int board_early_init_f (void)
+{
+	return 0;
+}
+
+int checkboard (void)
+{
+	puts ("BOARD : Psyent PK-1C20\n");
+	return 0;
+}
+
+long int initdram (int board_type)
+{
+	return (0);
+}

board/psyent/pk1c20/u-boot.lds

@@ -0,0 +1,136 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+OUTPUT_FORMAT("elf32-littlenios2")
+OUTPUT_ARCH(nios2)
+ENTRY(_start)
+
+SECTIONS
+{
+	.text :
+	{
+	  cpu/nios2/start.o (.text)
+	  *(.text)
+	  *(.text.*)
+	  *(.gnu.linkonce.t*)
+	  *(.rodata)
+	  *(.rodata.*)
+	  *(.gnu.linkonce.r*)
+	}
+	. = ALIGN (4);
+	_etext = .;
+	PROVIDE (etext = .);
+
+	/* CMD TABLE - sandwich this in between text and data so
+	 * the initialization code relocates the command table as
+	 * well -- admittedly, this is just pure laziness ;-)
+	 */
+	__u_boot_cmd_start = .;
+	.u_boot_cmd :
+	{
+	  *(.u_boot_cmd)
+	}
+	. = ALIGN(4);
+	__u_boot_cmd_end = .;
+
+	/* INIT DATA sections - "Small" data (see the gcc -G option)
+	 * is always gp-relative. Here we make all init data sections
+	 * adjacent to simplify the startup code -- and provide
+	 * the global pointer for gp-relative access.
+	 */
+	_data = .;
+	.data :
+	{
+	  *(.data)
+	  *(.data.*)
+	  *(.gnu.linkonce.d*)
+	}
+
+	. = ALIGN(16);
+	_gp = .;			/* Global pointer addr */
+	PROVIDE (gp = .);
+
+	.sdata :
+	{
+	  *(.sdata)
+	  *(.sdata.*)
+	  *(.gnu.linkonce.s.*)
+	}
+	. = ALIGN(4);
+
+	_edata = .;
+	PROVIDE (edata = .);
+
+	/* UNINIT DATA - Small uninitialized data is first so it's
+	 * adjacent to sdata and can be referenced via gp. The normal
+	 * bss follows. We keep it adjacent to simplify init code.
+	 */
+	__bss_start = .;
+	.sbss :
+	{
+	  *(.sbss)
+	  *(.sbss.*)
+	  *(.gnu.linkonce.sb.*)
+	  *(.scommon)
+	}
+	. = ALIGN(4);
+	.bss :
+	{
+	  *(.bss)
+	  *(.bss.*)
+	  *(.dynbss)
+	  *(COMMON)
+	  *(.scommon)
+	}
+	. = ALIGN(4);
+	_end = .;
+	PROVIDE (end = .);
+
+	/* DEBUG -- symbol table, string table, etc. etc.
+	 */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug		0 : { *(.debug) }
+	.line		0 : { *(.line) }
+	.debug_srcinfo	0 : { *(.debug_srcinfo) }
+	.debug_sfnames	0 : { *(.debug_sfnames) }
+	.debug_aranges	0 : { *(.debug_aranges) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_info	0 : { *(.debug_info) }
+	.debug_abbrev	0 : { *(.debug_abbrev) }
+	.debug_line	0 : { *(.debug_line) }
+	.debug_frame	0 : { *(.debug_frame) }
+	.debug_str	0 : { *(.debug_str) }
+	.debug_loc	0 : { *(.debug_loc) }
+	.debug_macinfo	0 : { *(.debug_macinfo) }
+	.debug_weaknames 0 : { *(.debug_weaknames) }
+	.debug_funcnames 0 : { *(.debug_funcnames) }
+	.debug_typenames 0 : { *(.debug_typenames) }
+	.debug_varnames	 0 : { *(.debug_varnames) }
+}

common/cmd_bdinfo.c

@@ -140,6 +140,39 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	return 0;
 }
 
+#elif defined(CONFIG_NIOS2) /* Nios-II */
+
+int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	int i;
+	bd_t *bd = gd->bd;
+
+	print_num ("mem start",		(ulong)bd->bi_memstart);
+	print_num ("mem size",		(ulong)bd->bi_memsize);
+	print_num ("flash start",	(ulong)bd->bi_flashstart);
+	print_num ("flash size",	(ulong)bd->bi_flashsize);
+	print_num ("flash offset",	(ulong)bd->bi_flashoffset);
+
+#if defined(CFG_SRAM_BASE)
+	print_num ("sram start",	(ulong)bd->bi_sramstart);
+	print_num ("sram size",		(ulong)bd->bi_sramsize);
+#endif
+
+#if defined(CFG_CMD_NET)
+	puts ("ethaddr     =");
+	for (i=0; i<6; ++i) {
+		printf ("%c%02X", i ? ':' : ' ', bd->bi_enetaddr[i]);
+	}
+	puts ("\nip_addr     = ");
+	print_IPaddr (bd->bi_ip_addr);
+#endif
+
+	printf ("\nbaudrate    = %ld bps\n", bd->bi_baudrate);
+
+	return 0;
+}
 
 #else /* ! PPC, which leaves MIPS */
 

common/cmd_bootm.c

@@ -244,6 +244,8 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	if (hdr->ih_arch != IH_CPU_M68K)
 #elif defined(__microblaze__)
 	if (hdr->ih_arch != IH_CPU_MICROBLAZE)
+#elif defined(__nios2__)
+	if (hdr->ih_arch != IH_CPU_NIOS2)
 #else
 # error Unknown CPU type
 #endif

cpu/mpc85xx/pci.c

@@ -114,7 +114,6 @@ pci_mpc85xx_init(struct pci_controller *hose)
 					  PCI_HEADER_TYPE,
 					  &header_type);
 	}
-	
 #endif
 
 	hose->last_busno = pci_hose_scan(hose);

cpu/nios2/Makefile

@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(CPU).a
+
+START	= start.o
+AOBJS	= exceptions.o
+OBJS	= cpu.o interrupts.o serial.o traps.o
+
+all:	.depend $(START) $(LIB)
+
+$(LIB):	$(OBJS) $(AOBJS)
+	$(AR) crv $@ $(OBJS) $(AOBJS)
+
+#########################################################################
+
+.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) $(AOBJS:.o=.S)
+	$(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) $(AOBJS:.o=.S) > $@
+
+sinclude .depend
+
+#########################################################################

cpu/nios2/config.mk

@@ -0,0 +1,24 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS +=

cpu/nios2/cpu.c

@@ -0,0 +1,62 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <nios2.h>
+#include <nios2-io.h>
+
+#if defined (CFG_NIOS_SYSID_BASE)
+#include <linux/time.h>
+static void check_sysid (void)
+{
+	struct nios_sysid_t *sysid =
+		(struct nios_sysid_t *)CACHE_BYPASS(CFG_NIOS_SYSID_BASE);
+	struct tm t;
+	char asc[32];
+
+	localtime_r ((time_t *)&sysid->timestamp, &t);
+	asctime_r (&t, asc);
+	printf ("SYSID : %08x, %s", sysid->id, asc);
+
+}
+#endif /* CFG_NIOS_SYSID_BASE */
+
+int checkcpu (void)
+{
+	printf ("CPU   : Nios-II\n");
+#if !defined(CFG_NIOS_SYSID_BASE)
+	printf ("SYSID : <unknown>\n");
+#else
+	check_sysid ();
+#endif
+	return (0);
+}
+
+
+int do_reset (void)
+{
+	void (*rst)(void) = (void(*)(void))CFG_RESET_ADDR;
+	disable_interrupts ();
+	rst();
+	return(0);
+}

cpu/nios2/exceptions.S

@@ -0,0 +1,152 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm/opcodes.h>
+
+
+	.text
+	.align	4
+
+	.global _exception
+
+_exception:
+	/* SAVE ALL REGS -- this allows trap and unimplemented
+	 * instruction handlers to be coded conveniently in C
+	 */
+	addi	sp, sp, -(33*4)
+	stw	r0, 0(sp)
+	stw	r1, 4(sp)
+	stw	r2, 8(sp)
+	stw	r3, 12(sp)
+	stw	r4, 16(sp)
+	stw	r5, 20(sp)
+	stw	r6, 24(sp)
+	stw	r7, 28(sp)
+	stw	r8, 32(sp)
+	stw	r9, 36(sp)
+	stw	r10, 40(sp)
+	stw	r11, 44(sp)
+	stw	r12, 48(sp)
+	stw	r13, 52(sp)
+	stw	r14, 56(sp)
+	stw	r15, 60(sp)
+	stw	r16, 64(sp)
+	stw	r17, 68(sp)
+	stw	r19, 72(sp)
+	stw	r19, 76(sp)
+	stw	r20, 80(sp)
+	stw	r21, 84(sp)
+	stw	r22, 88(sp)
+	stw	r23, 92(sp)
+	stw	r24, 96(sp)
+	stw	r25, 100(sp)
+	stw	r26, 104(sp)
+	stw	r27, 108(sp)
+	stw	r28, 112(sp)
+	stw	r29, 116(sp)
+	stw	r30, 120(sp)
+	stw	r31, 124(sp)
+	rdctl	et, estatus
+	stw	et, 128(sp)
+
+	/* If interrupts are disabled -- software interrupt */
+	rdctl	et, estatus
+	andi	et, et, 1
+	beq	et, r0, 0f
+
+	/* If no interrupts are pending -- software interrupt */
+	rdctl	et, ipending
+	beq	et, r0, 0f
+
+	/* HARDWARE INTERRUPT: Call interrupt handler */
+	movhi	r3, %hi(external_interrupt)
+	ori	r3, r3, %lo(external_interrupt)
+	mov	r4, sp		/* ptr to regs */
+	callr	r3
+
+	/* Return address fixup: execution resumes by re-issue of
+	 * interrupted instruction at ea-4 (ea == r29). Here we do
+	 * simple fixup to allow common exception return.
+	 */
+	ldw	r3, 116(sp)
+	addi	r3, r3, -4
+	stw	r3, 116(sp)
+	br	_exception_return
+
+0:
+	/* TRAP EXCEPTION */
+	movhi	r3, %hi(OPC_TRAP)
+	ori	r3, r3, %lo(OPC_TRAP)
+	addi	r1, ea, -4
+	ldw	r1, 0(r1)
+	bne	r1, r3, 1f
+	movhi	r3, %hi(trap_handler)
+	ori	r3, r3, %lo(trap_handler)
+	mov	r4, sp		/* ptr to regs */
+	callr	r3
+	br	_exception_return
+
+1:
+	/* UNIMPLEMENTED INSTRUCTION EXCEPTION */
+	movhi	r3, %hi(soft_emulation)
+	ori	r3, r3, %lo(soft_emulation)
+	mov	r4, sp		/* ptr to regs */
+	callr	r3
+
+	/* Restore regsisters and return from exception*/
+_exception_return:
+	ldw	r1, 4(sp)
+	ldw	r2, 8(sp)
+	ldw	r3, 12(sp)
+	ldw	r4, 16(sp)
+	ldw	r5, 20(sp)
+	ldw	r6, 24(sp)
+	ldw	r7, 28(sp)
+	ldw	r8, 32(sp)
+	ldw	r9, 36(sp)
+	ldw	r10, 40(sp)
+	ldw	r11, 44(sp)
+	ldw	r12, 48(sp)
+	ldw	r13, 52(sp)
+	ldw	r14, 56(sp)
+	ldw	r15, 60(sp)
+	ldw	r16, 64(sp)
+	ldw	r17, 68(sp)
+	ldw	r19, 72(sp)
+	ldw	r19, 76(sp)
+	ldw	r20, 80(sp)
+	ldw	r21, 84(sp)
+	ldw	r22, 88(sp)
+	ldw	r23, 92(sp)
+	ldw	r24, 96(sp)
+	ldw	r25, 100(sp)
+	ldw	r26, 104(sp)
+	ldw	r27, 108(sp)
+	ldw	r28, 112(sp)
+	ldw	r29, 116(sp)
+	ldw	r30, 120(sp)
+	ldw	r31, 124(sp)
+	addi	sp, sp, (33*4)
+	eret
+/*-------------------------------------------------------------*/

cpu/nios2/interrupts.c

@@ -0,0 +1,229 @@
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <nios2.h>
+#include <nios2-io.h>
+#include <asm/ptrace.h>
+#include <common.h>
+#include <command.h>
+#include <watchdog.h>
+#ifdef CONFIG_STATUS_LED
+#include <status_led.h>
+#endif
+
+#if defined(CFG_NIOS_TMRBASE) && !defined(CFG_NIOS_TMRIRQ)
+#error CFG_NIOS_TMRIRQ not defined (see documentation)
+#endif
+
+/****************************************************************************/
+
+struct	irq_action {
+	interrupt_handler_t *handler;
+	void *arg;
+	int count;
+};
+
+static struct irq_action vecs[32];
+
+/*************************************************************************/
+volatile ulong timestamp = 0;
+
+void reset_timer (void)
+{
+	timestamp = 0;
+}
+
+ulong get_timer (ulong base)
+{
+	WATCHDOG_RESET ();
+	return (timestamp - base);
+}
+
+void set_timer (ulong t)
+{
+	timestamp = t;
+}
+
+
+/* The board must handle this interrupt if a timer is not
+ * provided.
+ */
+#if defined(CFG_NIOS_TMRBASE)
+void tmr_isr (void *arg)
+{
+	nios_timer_t *tmr = (nios_timer_t *)arg;
+	/* Interrupt is cleared by writing anything to the
+	 * status register.
+	 */
+	tmr->status = 0;
+	timestamp += CFG_NIOS_TMRMS;
+#ifdef CONFIG_STATUS_LED
+	status_led_tick(timestamp);
+#endif
+}
+
+static void tmr_init (void)
+{
+	nios_timer_t *tmr =(nios_timer_t *)CACHE_BYPASS(CFG_NIOS_TMRBASE);
+
+	tmr->control &= ~(NIOS_TIMER_START | NIOS_TIMER_ITO);
+	tmr->control |= NIOS_TIMER_STOP;
+#if defined(CFG_NIOS_TMRCNT)
+	tmr->periodl = CFG_NIOS_TMRCNT & 0xffff;
+	tmr->periodh = (CFG_NIOS_TMRCNT >> 16) & 0xffff;
+#endif
+	tmr->control |= ( NIOS_TIMER_ITO |
+			  NIOS_TIMER_CONT |
+			  NIOS_TIMER_START );
+	irq_install_handler (CFG_NIOS_TMRIRQ, tmr_isr, (void *)tmr);
+}
+
+#endif /* CFG_NIOS_TMRBASE */
+
+/*************************************************************************/
+int disable_interrupts (void)
+{
+	int val = rdctl (CTL_STATUS);
+	wrctl (CTL_STATUS, val & ~STATUS_IE);
+	return (val & STATUS_IE);
+}
+
+void enable_interrupts( void )
+{
+	int val = rdctl (CTL_STATUS);
+	wrctl (CTL_STATUS, val | STATUS_IE);
+}
+
+void external_interrupt (struct pt_regs *regs)
+{
+	unsigned irqs;
+	struct irq_action *act;
+
+	/* Evaluate only irqs that are both enabled AND pending */
+	irqs = rdctl (CTL_IENABLE) & rdctl (CTL_IPENDING);
+	act = vecs;
+
+	/* Assume (as does the Nios2 HAL) that bit 0 is highest
+	 * priority. NOTE: There is ALWAYS a handler assigned
+	 * (the default if no other).
+	 */
+	while (irqs) {
+		if (irqs & 1) {
+			act->handler (act->arg);
+			act->count++;
+		}
+		irqs >>=1;
+		act++;
+	}
+}
+
+static void def_hdlr (void *arg)
+{
+	unsigned irqs = rdctl (CTL_IENABLE);
+
+	/* Disable the individual interrupt -- with gratuitous
+	 * warning.
+	 */
+	irqs &= ~(1 << (int)arg);
+	wrctl (CTL_IENABLE, irqs);
+	printf ("WARNING: Disabling unhandled interrupt: %d\n",
+			(int)arg);
+}
+
+/*************************************************************************/
+void irq_install_handler (int irq, interrupt_handler_t *hdlr, void *arg)
+{
+
+	int flag;
+	struct irq_action *act;
+	unsigned ena = rdctl (CTL_IENABLE);
+
+	if ((irq < 0) || (irq > 31))
+		return;
+	act = &vecs[irq];
+
+	flag = disable_interrupts ();
+	if (hdlr) {
+		act->handler = hdlr;
+		act->arg = arg;
+		ena |= (1 << irq);		/* enable */
+	} else {
+		act->handler = def_hdlr;
+		act->arg = (void *)irq;
+		ena &= ~(1 << irq);		/* disable */
+	}
+	wrctl (CTL_IENABLE, ena);
+	if (flag) enable_interrupts ();
+}
+
+
+int interrupt_init (void)
+{
+	int i;
+
+	/* Assign the default handler to all */
+	for (i = 0; i < 32; i++) {
+		vecs[i].handler = def_hdlr;
+		vecs[i].arg = (void *)i;
+		vecs[i].count = 0;
+	}
+
+#if defined(CFG_NIOS_TMRBASE)
+	tmr_init ();
+#endif
+
+	enable_interrupts ();
+	return (0);
+}
+
+
+/*************************************************************************/
+#if (CONFIG_COMMANDS & CFG_CMD_IRQ)
+int do_irqinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int i;
+	struct irq_action *act = vecs;
+
+	printf ("\nInterrupt-Information:\n\n");
+	printf ("Nr  Routine   Arg       Count\n");
+	printf ("-----------------------------\n");
+
+	for (i=0; i<32; i++) {
+		if (act->handler != def_hdlr) {
+			printf ("%02d  %08lx  %08lx  %d\n",
+				i,
+				(ulong)act->handler,
+				(ulong)act->arg,
+				act->count);
+		}
+		act++;
+	}
+	printf ("\n");
+
+	return (0);
+}
+#endif  /* CONFIG_COMMANDS & CFG_CMD_IRQ */

cpu/nios2/serial.c

@@ -0,0 +1,144 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include <watchdog.h>
+#include <nios2.h>
+#include <nios2-io.h>
+
+/*------------------------------------------------------------------
+ * JTAG acts as the serial port
+ *-----------------------------------------------------------------*/
+#if defined(CONFIG_CONSOLE_JTAG)
+
+static nios_jtag_t *jtag =
+	(nios_jtag_t *)CACHE_BYPASS(CFG_NIOS_CONSOLE);
+
+void serial_setbrg( void ){ return; }
+int serial_init( void ) { return(0);}
+
+void serial_putc (char c)
+{
+	unsigned val;
+
+	while (NIOS_JTAG_WSPACE (jtag->control) == 0)
+		WATCHDOG_RESET ();
+	jtag->data = (unsigned char)c;
+}
+
+void serial_puts (const char *s)
+{
+	while (*s != 0)
+		serial_putc (*s++);
+}
+
+int serial_tstc (void)
+{
+	return (jtag->control & NIOS_JTAG_RRDY);
+}
+
+int serial_getc (void)
+{
+	int c;
+	unsigned val;
+
+	while (1) {
+		WATCHDOG_RESET ();
+		val = jtag->data;
+		if (val & NIOS_JTAG_RVALID)
+			break;
+	}
+	c = val & 0x0ff;
+	return (c);
+}
+
+/*------------------------------------------------------------------
+ * UART the serial port
+ *-----------------------------------------------------------------*/
+#else
+
+static nios_uart_t *uart = (nios_uart_t *)
+	CACHE_BYPASS(CFG_NIOS_CONSOLE);
+
+#if defined(CFG_NIOS_FIXEDBAUD)
+
+/* Everything's already setup for fixed-baud PTF
+ * assignment
+ */
+void serial_setbrg (void){ return; }
+int serial_init (void) { return (0);}
+
+#else
+
+void serial_setbrg (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	unsigned div;
+
+	div = (CONFIG_SYS_CLK_FREQ/gd->baudrate)-1;
+	uart->divisor = div;
+	return;
+}
+
+int serial_init (void)
+{
+	serial_setbrg ();
+	return (0);
+}
+
+#endif /* CFG_NIOS_FIXEDBAUD */
+
+
+/*-----------------------------------------------------------------------
+ * UART CONSOLE
+ *---------------------------------------------------------------------*/
+void serial_putc (char c)
+{
+	if (c == '\n')
+		serial_putc ('\r');
+	while ((uart->status & NIOS_UART_TRDY) == 0)
+		WATCHDOG_RESET ();
+	uart->txdata = (unsigned char)c;
+}
+
+void serial_puts (const char *s)
+{
+	while (*s != 0) {
+		serial_putc (*s++);
+	}
+}
+
+int serial_tstc (void)
+{
+	return (uart->status & NIOS_UART_RRDY);
+}
+
+int serial_getc (void)
+{
+	while (serial_tstc () == 0)
+		WATCHDOG_RESET ();
+	return( uart->rxdata & 0x00ff );
+}
+
+#endif /* CONFIG_JTAG_CONSOLE */

cpu/nios2/start.S

@@ -0,0 +1,211 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <config.h>
+#include <version.h>
+
+/*************************************************************************
+ * RESTART
+ ************************************************************************/
+
+	.text
+	.global _start
+
+_start:
+	/* ICACHE INIT -- only the icache line at the reset address
+	 * is invalidated at reset. So the init must stay within
+	 * the cache line size (8 words). If GERMS is used, we'll
+	 * just be invalidating the cache a second time. If cache
+	 * is not implemented initi behaves as nop.
+	 */
+	movhi	r4, %hi(CFG_ICACHELINE_SIZE)
+	ori	r4, r4, %lo(CFG_ICACHELINE_SIZE)
+	movhi	r5, %hi(CFG_ICACHE_SIZE)
+	ori	r5, r5, %lo(CFG_ICACHE_SIZE)
+	mov	r6, r0
+0:	initi	r6
+	add	r6, r6, r4
+	bltu	r6, r5, 0b
+
+	/* INTERRUPTS -- for now, all interrupts masked and globally
+	 * disabled.
+	 */
+	wrctl	status, r0		/* Disable interrupts */
+	wrctl	ienable, r0		/* All disabled	*/
+
+	/* DCACHE INIT -- if dcache not implemented, initd behaves as
+	 * nop.
+	 */
+	movhi	r4, %hi(CFG_DCACHELINE_SIZE)
+	ori	r4, r4, %lo(CFG_DCACHELINE_SIZE)
+	movhi	r5, %hi(CFG_DCACHE_SIZE)
+	ori	r5, r5, %lo(CFG_DCACHE_SIZE)
+	mov	r6, r0
+1:	initd	0(r6)
+	add	r6, r6, r4
+	bltu	r6, r5, 1b
+
+	/* RELOCATE CODE, DATA & COMMAND TABLE -- the following code
+	 * assumes code, data and the command table are all
+	 * contiguous. This lets us relocate everything as a single
+	 * block. Make sure the linker script matches this ;-)
+	 */
+	nextpc	r4
+_cur:	movhi	r5, %hi(_cur - _start)
+	ori	r5, r5, %lo(_cur - _start)
+	sub	r4, r4, r5		/* r4 <- cur _start */
+	mov	r8, r4
+	movhi	r5, %hi(_start)
+	ori	r5, r5, %lo(_start)	/* r5 <- linked _start */
+	beq	r4, r5, 3f
+
+	movhi	r6, %hi(_edata)
+	ori	r6, r6, %lo(_edata)
+2:	ldwio	r7, 0(r4)
+	addi	r4, r4, 4
+	stwio	r7, 0(r5)
+	addi	r5, r5, 4
+	bne	r5, r6, 2b
+3:
+
+	/* ZERO BSS/SBSS -- bss and sbss are assumed to be adjacent
+	 * and between __bss_start and _end.
+	 */
+	 movhi	r5, %hi(__bss_start)
+	 ori	r5, r5, %lo(__bss_start)
+	 movhi	r6, %hi(_end)
+	 ori	r6, r6, %lo(_end)
+	 beq	r5, r6, 5f
+
+4:	stwio	r0, 0(r5)
+	 addi	r5, r5, 4
+	 bne	r5, r6, 4b
+5:
+
+	/* GLOBAL POINTER -- the global pointer is used to reference
+	 * "small data" (see -G switch). The linker script must
+	 * provide the gp address.
+	 */
+	 movhi	gp, %hi(_gp)
+	 ori	gp, gp, %lo(_gp)
+
+	/* JUMP TO RELOC ADDR */
+	movhi	r4, %hi(_reloc)
+	ori	r4, r4, %lo(_reloc)
+	jmp	r4
+_reloc:
+
+	/* COPY EXCEPTION TRAMPOLINE -- copy the tramp to the
+	 * exception address.
+	 */
+#if !defined(CONFIG_ROM_STUBS)
+	movhi	r4, %hi(_except_start)
+	ori	r4, r4, %lo(_except_start)
+	movhi	r5, %hi(_except_end)
+	ori	r5, r5, %lo(_except_end)
+	movhi	r6, %hi(CFG_EXCEPTION_ADDR)
+	ori	r6, r6, %lo(CFG_EXCEPTION_ADDR)
+
+6:	ldwio	r7, 0(r4)
+	stwio	r7, 0(r6)
+	addi	r4, r4, 4
+	addi	r6, r6, 4
+	bne	r4, r5, 6b
+#endif
+
+	/* STACK INIT -- zero top two words for call back chain.
+	 */
+	movhi	sp, %hi(CFG_INIT_SP)
+	ori	sp, sp, %lo(CFG_INIT_SP)
+	addi	sp, sp, -8
+	stw	r0, 0(sp)
+	stw	r0, 4(sp)
+	mov	fp, sp
+
+	/*
+	 * Call board_init -- never returns
+	 */
+	movhi	r4, %hi(board_init@h)
+	ori	r4, r4, %lo(board_init@h)
+	callr	r4
+
+	/* NEVER RETURNS -- but branch to the _start just
+	 * in case ;-)
+	 */
+	br	_start
+
+	/* EXCEPTION TRAMPOLINE -- the following gets copied
+	 * to the exception address.
+	 */
+_except_start:
+	movhi	et, %hi(_exception)
+	ori	et, et, %lo(_exception)
+	jmp	et
+_except_end:
+
+
+/*
+ * dly_clks -- Nios2 (like Nios1) doesn't have a timebase in
+ * the core. For simple delay loops, we do our best by counting
+ * instruction cycles.
+ *
+ * Instruction performance varies based on the core. For cores
+ * with icache and static/dynamic branch prediction (II/f, II/s):
+ *
+ * 	Normal ALU (e.g. add, cmp, etc):	1 cycle
+ * 	Branch (correctly predicted, taken):	2 cycles
+ *	Negative offset is predicted (II/s).
+ *
+ * For cores without icache and no branch prediction (II/e):
+ *
+ * 	Normal ALU (e.g. add, cmp, etc):	6 cycles
+ * 	Branch (no prediction):			6 cycles
+ *
+ * For simplicity, if an instruction cache is implemented we
+ * assume II/f or II/s. Otherwise, we use the II/e.
+ *
+ */
+ 	.globl dly_clks
+
+dly_clks:
+
+#if (CFG_ICACHE_SIZE > 0)
+	subi	r4, r4, 3		/* 3 clocks/loop	*/
+#else
+	subi	r4, r4, 12		/* 12 clocks/loop	*/
+#endif
+	bge	r4, r0, dly_clks
+	ret
+
+
+#if !defined(CONFIG_IDENT_STRING)
+#define CONFIG_IDENT_STRING ""
+#endif
+	.data
+	.globl	version_string
+
+version_string:
+	.ascii U_BOOT_VERSION
+	.ascii " (", __DATE__, " - ", __TIME__, ")"
+	.ascii CONFIG_IDENT_STRING, "\0"

cpu/nios2/traps.c

@@ -0,0 +1,42 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/ptrace.h>
+#include <common.h>
+
+void trap_handler (struct pt_regs *regs)
+{
+	/* Just issue warning */
+	printf ("\n\n*** WARNING: unimplemented trap @ %08x\n\n",
+			regs->reg[29] - 4);
+}
+
+void soft_emulation (struct pt_regs *regs)
+{
+	/* TODO: Software emulation of mul/div etc. Until this is
+	 * implemented, generate warning and hang.
+	 */
+	printf ("\n\n*** ERROR: unimplemented instruction @ %08x\n",
+			regs->reg[29] - 4);
+	hang ();
+}

doc/README.mpc85xxcds

@@ -6,7 +6,7 @@ The CDS family of boards consists of a PCI backplane called the
 and a CPU daughter card that bolts onto the daughter card.
 
 Much of the content of the README.mpc85xxads for the 85xx ADS boards
-applies to the 85xx CDS boards as well.  In particular the toolchain,
+applies to the 85xx CDS boards as well.	 In particular the toolchain,
 the switch nomenclature, and the basis for the memory map.  There are
 some differences, though.
 
@@ -33,16 +33,16 @@ map.
 
 The mapping is:
 
-   0x0000_0000     0x7fff_ffff     DDR                     2G
+   0x0000_0000	   0x7fff_ffff	   DDR			   2G
-   0x8000_0000     0x9fff_ffff     PCI1 MEM                512M
+   0x8000_0000	   0x9fff_ffff	   PCI1 MEM		   512M
-   0xa000_0000     0xbfff_ffff     PCI2 MEM                512M
+   0xa000_0000	   0xbfff_ffff	   PCI2 MEM		   512M
-   0xe000_0000     0xe00f_ffff     CCSR                    1M
+   0xe000_0000	   0xe00f_ffff	   CCSR			   1M
-   0xe200_0000     0xe2ff_ffff     PCI1 IO                 16M
+   0xe200_0000	   0xe2ff_ffff	   PCI1 IO		   16M
-   0xe300_0000     0xe3ff_ffff     PCI2 IO                 16M
+   0xe300_0000	   0xe3ff_ffff	   PCI2 IO		   16M
-   0xf000_0000     0xf7ff_ffff     SDRAM                   128M
+   0xf000_0000	   0xf7ff_ffff	   SDRAM		   128M
-   0xf800_0000     0xf80f_ffff     NVRAM/CADMUS (*)        1M
+   0xf800_0000	   0xf80f_ffff	   NVRAM/CADMUS (*)	   1M
-   0xff00_0000     0xff7f_ffff     FLASH (2nd bank)        8M
+   0xff00_0000	   0xff7f_ffff	   FLASH (2nd bank)	   8M
-   0xff80_0000     0xffff_ffff     FLASH (boot bank)       8M
+   0xff80_0000	   0xffff_ffff	   FLASH (boot bank)	   8M
 
    (*) The system control registers (CADMUS) start at offset 0xfdb0_4000
    within the NVRAM/CADMUS region of memory.
@@ -67,9 +67,9 @@ it into the secondary bank:
 
      loadb
      [Drop to kermit:
-        ^\c
+	^\c
-        send <u-boot-bin-image>
+	send <u-boot-bin-image>
-        c
+	c
      ]
 
      erase ff780000 ff7fffff
@@ -102,10 +102,10 @@ The first two bits of SW2 control how flash is used on the board:
 
       12345678
       --------
-  SW2=00XXXXXX     FLASH:  Boot bank 1, bank 2 available.
+  SW2=00XXXXXX	   FLASH:  Boot bank 1, bank 2 available.
-      01XXXXXX     FLASH:  Boot bank 2, bank 1 available (swapped).
+      01XXXXXX	   FLASH:  Boot bank 2, bank 1 available (swapped).
-      10XXXXXX     FLASH:  Boot promjet, bank 1 available
+      10XXXXXX	   FLASH:  Boot promjet, bank 1 available
-      11XXXXXX     FLASH:  Boot promjet, bank 2 available
+      11XXXXXX	   FLASH:  Boot promjet, bank 2 available
 
 The boot bank is always mapped to FF80_0000 and listed first by
 the "flinfo" command.  The secondary bank is always FF00_0000.
@@ -116,10 +116,10 @@ convey this information:
 
       12345678
       --------
-  SW2=xxxxxx00     PCI SLOT INFORM: The CDS carrier is in slot0 of the Arcadia
+  SW2=xxxxxx00	   PCI SLOT INFORM: The CDS carrier is in slot0 of the Arcadia
-      xxxxxx01     PCI SLOT INFORM: The CDS carrier is in slot1 of the Arcadia
+      xxxxxx01	   PCI SLOT INFORM: The CDS carrier is in slot1 of the Arcadia
-      xxxxxx10     PCI SLOT INFORM: The CDS carrier is in slot2 of the Arcadia
+      xxxxxx10	   PCI SLOT INFORM: The CDS carrier is in slot2 of the Arcadia
-      xxxxxx11     PCI SLOT INFORM: The CDS carrier is in slot3 of the Arcadia
+      xxxxxx11	   PCI SLOT INFORM: The CDS carrier is in slot3 of the Arcadia
 
 These are cleverly, er, clearly silkscreened as Slot 1 through 4,
 respectively, on the Arcadia near the support posts.
@@ -130,7 +130,7 @@ The default setting of all switches on the carrier board is:
       12345678
       --------
   SW1=01101100
-  SW2=0x1111yy     x=Flash bank, yy=PCI slot
+  SW2=0x1111yy	   x=Flash bank, yy=PCI slot
   SW3=11101111
   SW4=10001000
 
@@ -178,10 +178,9 @@ Commands for downloading a u-boot image to memory from edink:
    time -s 4/8/2004 4:30p
    dl -k -b -o 100000
    [Drop to kermit:
-        ^\c
+	^\c
-        transmit /binary <u-boot-bin-image>
+	transmit /binary <u-boot-bin-image>
-        c
+	c
    ]
 
    fu -l 100000 fe780000 80000
-

examples/Makefile

@@ -41,6 +41,10 @@ ifeq ($(ARCH),nios)
 LOAD_ADDR = 0x00800000 -L $(gcclibdir)/m32 -T nios.lds
 endif
 
+ifeq ($(ARCH),nios2)
+LOAD_ADDR = 0x00800000 -L $(gcclibdir) -T nios2.lds
+endif
+
 ifeq ($(ARCH),m68k)
 LOAD_ADDR = 0x20000  -L $(clibdir)
 endif

examples/nios2.lds

@@ -0,0 +1,133 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+OUTPUT_FORMAT("elf32-littlenios2")
+OUTPUT_ARCH(nios2)
+ENTRY(_start)
+
+SECTIONS
+{
+	.text :
+	{
+	  *(.text)
+	  *(.text.*)
+	  *(.gnu.linkonce.t*)
+	  *(.rodata)
+	  *(.rodata.*)
+	  *(.gnu.linkonce.r*)
+	}
+	. = ALIGN (4);
+	_etext = .;
+	PROVIDE (etext = .);
+
+	/* INIT DATA sections - "Small" data (see the gcc -G option)
+	 * is always gp-relative. Here we make all init data sections
+	 * adjacent to simplify the startup code -- and provide
+	 * the global pointer for gp-relative access.
+	 */
+	_data = .;
+	.data :
+	{
+	  *(.data)
+	  *(.data.*)
+	  *(.gnu.linkonce.d*)
+	}
+
+	. = ALIGN(16);
+	_gp = .;			/* Global pointer addr */
+	PROVIDE (gp = .);
+
+	.sdata :
+	{
+	  *(.sdata)
+	  *(.sdata.*)
+	  *(.gnu.linkonce.s.*)
+	}
+	. = ALIGN(4);
+
+	_edata = .;
+	PROVIDE (edata = .);
+
+	/* UNINIT DATA - Small uninitialized data is first so it's
+	 * adjacent to sdata and can be referenced via gp. The normal
+	 * bss follows. We keep it adjacent to simplify init code.
+	 */
+	__bss_start = .;
+	.sbss :
+	{
+	  *(.sbss)
+	  *(.sbss.*)
+	  *(.gnu.linkonce.sb.*)
+	  *(.scommon)
+	}
+	. = ALIGN(4);
+	.bss :
+	{
+	  *(.bss)
+	  *(.bss.*)
+	  *(.dynbss)
+	  *(COMMON)
+	  *(.scommon)
+	}
+	. = ALIGN(4);
+	_end = .;
+	PROVIDE (end = .);
+
+	/* CMD TABLE - uboot command sections
+	 */
+	__uboot_cmd_start = .;
+	.u_boot_cmd :
+	{
+	  *(.u_boot_cmd)
+	}
+	. = ALIGN(4);
+	__u_boot_cmd_end = .;
+
+	/* DEBUG -- symbol table, string table, etc. etc.
+	 */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug          0 : { *(.debug) }
+	.line           0 : { *(.line) }
+	.debug_srcinfo  0 : { *(.debug_srcinfo) }
+	.debug_sfnames  0 : { *(.debug_sfnames) }
+	.debug_aranges  0 : { *(.debug_aranges) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_info     0 : { *(.debug_info) }
+	.debug_abbrev   0 : { *(.debug_abbrev) }
+	.debug_line     0 : { *(.debug_line) }
+	.debug_frame    0 : { *(.debug_frame) }
+	.debug_str      0 : { *(.debug_str) }
+	.debug_loc      0 : { *(.debug_loc) }
+	.debug_macinfo  0 : { *(.debug_macinfo) }
+	.debug_weaknames 0 : { *(.debug_weaknames) }
+	.debug_funcnames 0 : { *(.debug_funcnames) }
+	.debug_typenames 0 : { *(.debug_typenames) }
+	.debug_varnames  0 : { *(.debug_varnames) }
+}

examples/stubs.c

@@ -82,6 +82,21 @@ gd_t *global_data;
 "	jmp	%%g0\n"			\
 "	nop	\n"			\
 	: : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x) : "r0");
+#elif defined(CONFIG_NIOS2)
+/*
+ * r15 holds the pointer to the global_data, r8 is call-clobbered
+ */
+#define EXPORT_FUNC(x) \
+	asm volatile (			\
+"	.globl " #x "\n"		\
+#x ":\n"				\
+"	movhi	r8, %%hi(%0)\n"		\
+"	ori	r8, r0, %%lo(%0)\n"	\
+"	add	r8, r0, r15\n"		\
+"	ldw	r8, 0(r8)\n"		\
+"	ldw	r8, %1(r8)\n"		\
+"	jmp	r8\n"			\
+	: : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "r15");
 #elif defined(CONFIG_M68K)
 /*
  * d7 holds the pointer to the global_data, a0 is a call-clobbered

include/asm-nios2/bitops.h

@@ -0,0 +1,37 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_NIOS2_BITOPS_H_
+#define __ASM_NIOS2_BITOPS_H_
+
+
+extern void set_bit(int nr, volatile void * a);
+extern void clear_bit(int nr, volatile void * a);
+extern int test_and_clear_bit(int nr, volatile void * a);
+extern void change_bit(unsigned long nr, volatile void *addr);
+extern int test_and_set_bit(int nr, volatile void * a);
+extern int test_and_change_bit(int nr, volatile void * addr);
+extern int test_bit(int nr, volatile void * a);
+extern int ffs(int i);
+
+#endif /* __ASM_NIOS2_BITOPS_H */

include/asm-nios2/byteorder.h

@@ -0,0 +1,30 @@
+/*
+* (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+* Scott McNutt <smcnutt@psyent.com>
+*
+* See file CREDITS for list of people who contributed to this
+* project.
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation; either version 2 of
+* the License, or (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+* MA 02111-1307 USA
+*/
+
+#ifndef __ASM_NIOS2_BYTEORDER_H_
+#define __ASM_NIOS2_BYTEORDER_H_
+
+#include <asm/types.h>
+#include <linux/byteorder/little_endian.h>
+
+#endif /* __ASM_NIOS2_BYTEORDER_H_ */

include/asm-nios2/cache.h

@@ -0,0 +1,30 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_NIOS2_CACHE_H_
+#define __ASM_NIOS2_CACHE_H_
+
+extern void flush_dcache (unsigned long start, unsigned long size);
+extern void flush_icache (unsigned long start, unsigned long size);
+
+#endif /* __ASM_NIOS2_CACHE_H_ */

include/asm-nios2/global_data.h

@@ -0,0 +1,50 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef	__ASM_NIOS2_GLOBALDATA_H_
+#define __ASM_NIOS2_GLOBALDATA_H_
+
+typedef	struct	global_data {
+	bd_t		*bd;
+	unsigned long	flags;
+	unsigned long	baudrate;
+	unsigned long	cpu_clk;	/* CPU clock in Hz!		*/
+	unsigned long	have_console;	/* serial_init() was called */
+	unsigned long	ram_size;	/* RAM size */
+	unsigned long	reloc_off;	/* Relocation Offset */
+	unsigned long	env_addr;	/* Address  of Environment struct */
+	unsigned long	env_valid;	/* Checksum of Environment valid */
+#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
+	unsigned long	post_log_word;	/* Record POST activities */
+	unsigned long	post_init_f_time; /* When post_init_f started */
+#endif
+	void		**jt;		/* Standalone app jump table */
+} gd_t;
+
+/* flags */
+#define	GD_FLG_RELOC	0x00001		/* Code was relocated to RAM		*/
+#define	GD_FLG_DEVINIT	0x00002		/* Devices have been initialized	*/
+#define	GD_FLG_SILENT	0x00004		/* Silent mode				*/
+
+#define DECLARE_GLOBAL_DATA_PTR     register gd_t *gd asm ("r15")
+
+#endif /* __ASM_NIOS2_GLOBALDATA_H_ */

include/asm-nios2/io.h

@@ -0,0 +1,36 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_NIOS2_IO_H_
+#define __ASM_NIOS2_IO_H_
+
+#define sync() asm volatile ("sync" : : : "memory");
+
+extern unsigned char inb (unsigned char *port);
+extern unsigned short inw (unsigned short *port);
+extern unsigned inl (unsigned port);
+extern void outb (unsigned char val, unsigned char *port);
+extern void outw (unsigned short val, unsigned short *port);
+extern void outl (unsigned val, unsigned port);
+
+#endif /* __ASM_NIOS2_IO_H_ */

include/asm-nios2/opcodes.h

@@ -0,0 +1,131 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_NIOS2_OPCODES_H_
+#define __ASM_NIOS2_OPCODES_H_
+
+#define OPCODE_OP(inst)	((inst) & 0x3f)
+#define OPCODE_OPX(inst) (((inst)>>11) & 0x3f)
+#define OPCODE_RA(inst) (((inst)>>27) & 01f)
+#define OPCODE_RB(inst) (((inst)>>22) & 01f)
+#define OPCODE_RC(inst) (((inst)>>17) & 01f)
+
+/* I-TYPE (immediate) and J-TYPE (jump) opcodes
+ */
+#define OPCODE_CALL	0x00
+#define OPCODE_LDBU	0x03
+#define OPCODE_ADDI	0x04
+#define OPCODE_STB	0x05
+#define OPCODE_BR	0x06
+#define OPCODE_LDB	0x07
+#define OPCODE_CMPGEI	0x08
+#define OPCODE_LDHU	0x0B
+#define OPCODE_ANDI	0x0C
+#define OPCODE_STH	0x0D
+#define OPCODE_BGE	0x0E
+#define OPCODE_LDH	0x0F
+#define OPCODE_CMPLTI	0x10
+#define OPCODE_XORI	0x1C
+#define OPCODE_ORI	0x14
+#define OPCODE_STW	0x15
+#define OPCODE_BLT	0x16
+#define OPCODE_LDW	0x17
+#define OPCODE_CMPNEI	0x18
+#define OPCODE_BNE	0x1E
+#define OPCODE_CMPEQI	0x20
+#define OPCODE_LDBUIO	0x23
+#define OPCODE_MULI	0x24
+#define OPCODE_STBIO	0x25
+#define OPCODE_BEQ	0x26
+#define OPCODE_LDBIO	0x27
+#define OPCODE_CMPGEUI	0x28
+#define OPCODE_ANDHI	0x2C
+#define OPCODE_STHIO	0x2D
+#define OPCODE_BGEU	0x2E
+#define OPCODE_LDHIO	0x2F
+#define OPCODE_CMPLTUI	0x30
+#define OPCODE_CUSTOM	0x32
+#define OPCODE_INITD	0x33
+#define OPCODE_ORHI	0x34
+#define OPCODE_STWIO	0x35
+#define OPCODE_BLTU	0x36
+#define OPCODE_LDWIO	0x37
+#define OPCODE_RTYPE	0x3A
+#define OPCODE_LDHUIO	0x2B
+#define OPCODE_FLUSHD	0x3B
+#define OPCODE_XORHI	0x3C
+
+/* R-Type (register) OPX field encodings
+ */
+#define OPCODE_ERET	0x01
+#define OPCODE_ROLI	0x02
+#define OPCODE_ROL	0x03
+#define OPCODE_FLUSHP	0x04
+#define OPCODE_RET	0x05
+#define OPCODE_NOR	0x06
+#define OPCODE_MULXUU	0x07
+#define OPCODE_CMPGE	0x08
+#define OPCODE_BRET	0x09
+#define OPCODE_ROR	0x0B
+#define OPCODE_FLUSHI	0x0C
+#define OPCODE_JMP	0x0D
+#define OPCODE_AND	0x0E
+
+#define OPCODE_CMPLT	0x10
+#define OPCODE_SLLI	0x12
+#define OPCODE_SLL	0x13
+#define OPCODE_OR	0x16
+#define OPCODE_MULXSU	0x17
+#define OPCODE_CMPNE	0x18
+#define OPCODE_SRLI	0x1A
+#define OPCODE_SRL	0x1B
+#define OPCODE_NEXTPC	0x1C
+#define OPCODE_CALLR	0x1D
+#define OPCODE_XOR	0x1E
+#define OPCODE_MULXSS	0x1F
+
+#define OPCODE_CMPEQ	0x20
+#define OPCODE_CMPLTU	0x30
+#define OPCODE_ADD	0x31
+#define OPCODE_DIVU	0x24
+#define OPCODE_DIV	0x25
+#define OPCODE_RDCTL	0x26
+#define OPCODE_MUL	0x27
+#define OPCODE_CMPGEU	0x28
+#define OPCODE_TRAP	0x2D
+#define OPCODE_WRCTL	0x2E
+
+#define OPCODE_BREAK	0x34
+#define OPCODE_SYNC	0x36
+#define OPCODE_INITI	0x29
+#define OPCODE_SUB	0x39
+#define OPCODE_SRAI	0x3A
+#define OPCODE_SRA	0x3B
+
+/*Full instruction encodings for R-Type, without the R's ;-)
+ *
+ * TODO: BREAK, BRET, ERET, RET, SYNC (as needed)
+ */
+#define OPC_TRAP	0x003b683a
+
+#endif /* __ASM_NIOS2_OPCODES_H_ */

include/asm-nios2/posix_types.h

@@ -0,0 +1,63 @@
+#ifndef __ASM_NIOS2_POSIX_TYPES_H_
+#define __ASM_NIOS2_POSIX_TYPES_H_
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned short	__kernel_dev_t;
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned short	__kernel_mode_t;
+typedef unsigned short	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef int		__kernel_pid_t;
+typedef unsigned short	__kernel_ipc_pid_t;
+typedef unsigned short	__kernel_uid_t;
+typedef unsigned short	__kernel_gid_t;
+typedef unsigned long	__kernel_size_t;
+typedef int		__kernel_ssize_t;
+typedef int		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+
+typedef unsigned short	__kernel_old_uid_t;
+typedef unsigned short	__kernel_old_gid_t;
+
+#ifdef __GNUC__
+typedef long long	__kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+	int	val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+	int	__val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef	__FD_SET
+#define	__FD_SET(d, set)	((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+
+#undef	__FD_CLR
+#define	__FD_CLR(d, set)	((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+
+#undef	__FD_ISSET
+#define	__FD_ISSET(d, set)	((set)->fds_bits[__FDELT(d)] & __FDMASK(d))
+
+#undef	__FD_ZERO
+#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif /* __ASM_NIOS2_POSIX_TYPES_H_ */

include/asm-nios2/processor.h

@@ -0,0 +1,26 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_NIOS2_PROCESSOR_H_
+#define __ASM_NIOS2_PROCESSOR_H_
+#endif /* __ASM_NIOS2_PROCESSOR_H_ */

include/asm-nios2/psr.h

@@ -0,0 +1,28 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_NIOS2_PSR_H_
+#define __ASM_NIOS2_PSR_H_
+
+
+#endif /* __ASM_NIOS2_PSR_H_ */

include/asm-nios2/ptrace.h

@@ -0,0 +1,33 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_NIOS2_PTRACE_H_
+#define __ASM_NIOS2_PTRACE_H_
+
+struct pt_regs {
+	unsigned reg[32];
+	unsigned status;
+};
+
+
+#endif /* __ASM_NIOS2_PTRACE_H_ */

include/asm-nios2/status_led.h

@@ -0,0 +1,31 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_STATUS_LED_H__
+#define __ASM_STATUS_LED_H__
+
+typedef unsigned led_id_t;
+extern void __led_init (led_id_t mask, int state);
+extern void __led_set (led_id_t mask, int state);
+inline void __led_toggle (led_id_t mask);
+
+#endif	/* __ASM_STATUS_LED_H__ */

include/asm-nios2/string.h

@@ -0,0 +1,47 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_NIOS2_STRING_H_
+#define __ASM_NIOS2_STRING_H_
+
+#undef __HAVE_ARCH_STRRCHR
+extern char * strrchr(const char * s, int c);
+
+#undef __HAVE_ARCH_STRCHR
+extern char * strchr(const char * s, int c);
+
+#undef __HAVE_ARCH_MEMCPY
+extern void * memcpy(void *, const void *, __kernel_size_t);
+
+#undef __HAVE_ARCH_MEMMOVE
+extern void * memmove(void *, const void *, __kernel_size_t);
+
+#undef __HAVE_ARCH_MEMCHR
+extern void * memchr(const void *, int, __kernel_size_t);
+
+#undef __HAVE_ARCH_MEMSET
+extern void * memset(void *, int, __kernel_size_t);
+
+#undef __HAVE_ARCH_MEMZERO
+extern void memzero(void *ptr, __kernel_size_t n);
+
+#endif /* __ASM_NIOS2_STRING_H_ */

include/asm-nios2/system.h

@@ -0,0 +1,26 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_NIOS2_SYSTEM_H_
+#define __ASM_NIOS2_SYSTEM_H_
+
+#endif /* __ASM_NIOS2_SYSTEM_H */

include/asm-nios2/types.h

@@ -0,0 +1,57 @@
+#ifndef __ASM_NIOS2_TYPES_H_
+#define __ASM_NIOS2_TYPES_H_
+
+/*
+ * This file is never included by application software unless
+ * explicitly requested (e.g., via linux/types.h) in which case the
+ * application is Linux specific so (user-) name space pollution is
+ * not a major issue.  However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ */
+
+typedef unsigned short umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+
+#define BITS_PER_LONG 32
+
+/* Dma addresses are 32-bits wide.  */
+
+typedef u32 dma_addr_t;
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_NIOS2_TYPES_H */

include/asm-nios2/u-boot.h

@@ -0,0 +1,41 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_NIOS2_U_BOOT_H_
+#define __ASM_NIOS2_U_BOOT_H_
+
+typedef struct bd_info {
+	unsigned long	bi_memstart;	/* start of DRAM memory */
+	unsigned long	bi_memsize;	/* size	 of DRAM memory in bytes */
+	unsigned long	bi_flashstart;	/* start of FLASH memory */
+	unsigned long	bi_flashsize;	/* size	 of FLASH memory */
+	unsigned long	bi_flashoffset; /* reserved area for startup monitor */
+	unsigned long	bi_sramstart;	/* start of SRAM memory */
+	unsigned long	bi_sramsize;	/* size	 of SRAM memory */
+	unsigned long	bi_ip_addr;	/* IP Address */
+	unsigned char	bi_enetaddr[6]; /* Ethernet adress */
+	unsigned long	bi_baudrate;	/* Console Baudrate */
+} bd_t;
+
+
+#endif	/* __ASM_NIOS2_U_BOOT_H_ */

include/configs/MPC8541CDS.h

@@ -26,7 +26,6 @@
  * Please refer to doc/README.mpc85xxcds for more info.
  *
  */
-
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
@@ -72,7 +71,6 @@ extern unsigned long get_clock_freq(void);
 #define CFG_MEMTEST_START	0x00200000	/* memtest works on */
 #define CFG_MEMTEST_END		0x00400000
 
-
 /*
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
@@ -81,7 +79,6 @@ extern unsigned long get_clock_freq(void);
 #define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
 #define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
 
-
 /*
  * DDR Setup
  */
@@ -97,8 +94,6 @@ extern unsigned long get_clock_freq(void);
 #error ("CONFIG_SPD_EEPROM is required by MPC85555CDS")
 #endif
 
-
-
 /*
  * SDRAM on the Local Bus
  */
@@ -244,7 +239,6 @@ extern unsigned long get_clock_freq(void);
 #define CFG_BR3_PRELIM   0xf8000801
 #define CFG_OR3_PRELIM   0xfff00ff7
 
-
 #define CONFIG_L1_INIT_RAM
 #define CFG_INIT_RAM_LOCK 	1
 #define CFG_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
@@ -344,8 +338,6 @@ extern unsigned long get_clock_freq(void);
 
 #endif	/* CONFIG_TSEC_ENET */
 
-
-
 /*
  * Environment
  */
@@ -369,8 +361,6 @@ extern unsigned long get_clock_freq(void);
 				| CFG_CMD_I2C \
 				| CFG_CMD_MII)
 #endif
-
-
 #include <cmd_confdefs.h>
 
 #undef CONFIG_WATCHDOG			/* watchdog disabled */
@@ -418,7 +408,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
-
 /*
  * Environment Configuration
  */
@@ -470,5 +459,4 @@ extern unsigned long get_clock_freq(void);
 
 #define CONFIG_BOOTCOMMAND  CONFIG_NFSBOOTCOMMAND
 
-
 #endif	/* __CONFIG_H */

include/configs/MPC8555CDS.h

@@ -26,7 +26,6 @@
  * Please refer to doc/README.mpc85xxcds for more info.
  *
  */
-
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
@@ -72,7 +71,6 @@ extern unsigned long get_clock_freq(void);
 #define CFG_MEMTEST_START	0x00200000	/* memtest works on */
 #define CFG_MEMTEST_END		0x00400000
 
-
 /*
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
@@ -81,7 +79,6 @@ extern unsigned long get_clock_freq(void);
 #define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
 #define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
 
-
 /*
  * DDR Setup
  */
@@ -97,8 +94,6 @@ extern unsigned long get_clock_freq(void);
 #error ("CONFIG_SPD_EEPROM is required by MPC85555CDS")
 #endif
 
-
-
 /*
  * SDRAM on the Local Bus
  */
@@ -244,7 +239,6 @@ extern unsigned long get_clock_freq(void);
 #define CFG_BR3_PRELIM   0xf8000801
 #define CFG_OR3_PRELIM   0xfff00ff7
 
-
 #define CONFIG_L1_INIT_RAM
 #define CFG_INIT_RAM_LOCK 	1
 #define CFG_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
@@ -344,8 +338,6 @@ extern unsigned long get_clock_freq(void);
 
 #endif	/* CONFIG_TSEC_ENET */
 
-
-
 /*
  * Environment
  */
@@ -369,8 +361,6 @@ extern unsigned long get_clock_freq(void);
 				| CFG_CMD_I2C \
 				| CFG_CMD_MII)
 #endif
-
-
 #include <cmd_confdefs.h>
 
 #undef CONFIG_WATCHDOG			/* watchdog disabled */
@@ -418,7 +408,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
-
 /*
  * Environment Configuration
  */
@@ -470,5 +459,4 @@ extern unsigned long get_clock_freq(void);
 
 #define CONFIG_BOOTCOMMAND  CONFIG_NFSBOOTCOMMAND
 
-
 #endif	/* __CONFIG_H */

include/configs/PCI5441.h

@@ -0,0 +1,155 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*------------------------------------------------------------------------
+ * BOARD/CPU
+ *----------------------------------------------------------------------*/
+#define	CONFIG_PCI5441		1		/* PCI-5441 board	*/
+#define CONFIG_SYS_CLK_FREQ	50000000	/* 50 MHz core clk	*/
+
+#define CFG_RESET_ADDR		0x00000000	/* Hard-reset address	*/
+#define CFG_EXCEPTION_ADDR	0x01000020	/* Exception entry point*/
+#define CFG_NIOS_SYSID_BASE	0x00920828	/* System id address	*/
+#define	CONFIG_BOARD_EARLY_INIT_F 1	/* enable early board-spec. init*/
+
+/*------------------------------------------------------------------------
+ * CACHE -- the following will support II/s and II/f. The II/s does not
+ * have dcache, so the cache instructions will behave as NOPs.
+ *----------------------------------------------------------------------*/
+#define CFG_ICACHE_SIZE		4096		/* 4 KByte total	*/
+#define CFG_ICACHELINE_SIZE	32		/* 32 bytes/line	*/
+#define CFG_DCACHE_SIZE		2048		/* 2 KByte (II/f)	*/
+#define CFG_DCACHELINE_SIZE	4		/* 4 bytes/line (II/f)	*/
+
+/*------------------------------------------------------------------------
+ * MEMORY BASE ADDRESSES
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_BASE		0x00000000	/* FLASH base addr	*/
+#define CFG_FLASH_SIZE		0x00800000	/* 8 MByte		*/
+#define CFG_SDRAM_BASE		0x01000000	/* SDRAM base addr	*/
+#define CFG_SDRAM_SIZE		0x01000000	/* 16 MByte		*/
+
+/*------------------------------------------------------------------------
+ * MEMORY ORGANIZATION
+ * 	-Monitor at top.
+ * 	-The heap is placed below the monitor.
+ * 	-Global data is placed below the heap.
+ * 	-The stack is placed below global data (&grows down).
+ *----------------------------------------------------------------------*/
+#define CFG_MONITOR_LEN		(128 * 1024)	/* Reserve 128k		*/
+#define CFG_GBL_DATA_SIZE	128		/* Global data size rsvd*/
+#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
+
+#define CFG_MONITOR_BASE	TEXT_BASE
+#define CFG_MALLOC_BASE		(CFG_MONITOR_BASE - CFG_MALLOC_LEN)
+#define CFG_GBL_DATA_OFFSET	(CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP		CFG_GBL_DATA_OFFSET
+
+/*------------------------------------------------------------------------
+ * FLASH (AM29LV065D)
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_FLASH_SECT	128		/* Max # sects per bank */
+#define CFG_MAX_FLASH_BANKS	1		/* Max # of flash banks */
+#define CFG_FLASH_ERASE_TOUT	8000		/* Erase timeout (msec) */
+#define CFG_FLASH_WRITE_TOUT	100		/* Write timeout (msec) */
+#define CFG_FLASH_WORD_SIZE	unsigned char	/* flash word size	*/
+
+/*------------------------------------------------------------------------
+ * ENVIRONMENT -- Put environment in sector CFG_MONITOR_LEN above
+ * CFG_RESET_ADDR, since we assume the monitor is stored at the
+ * reset address, no? This will keep the environment in user region
+ * of flash. NOTE: the monitor length must be multiple of sector size
+ * (which is common practice).
+ *----------------------------------------------------------------------*/
+#define	CFG_ENV_IS_IN_FLASH	1		/* Environment in flash */
+#define CFG_ENV_SIZE		(64 * 1024)	/* 64 KByte (1 sector)	*/
+#define CONFIG_ENV_OVERWRITE			/* Serial change Ok	*/
+#define CFG_ENV_ADDR 	(CFG_RESET_ADDR + CFG_MONITOR_LEN)
+
+/*------------------------------------------------------------------------
+ * CONSOLE
+ *----------------------------------------------------------------------*/
+#if defined(CONFIG_CONSOLE_JTAG)
+#define CFG_NIOS_CONSOLE	0x00920820	/* JTAG UART base addr	*/
+#else
+#define CFG_NIOS_CONSOLE	0x009208a0	/* UART base addr	*/
+#endif
+
+#define CFG_NIOS_FIXEDBAUD	1		/* Baudrate is fixed	*/
+#define CONFIG_BAUDRATE		115200		/* Initial baudrate	*/
+#define CFG_BAUDRATE_TABLE	{115200}	/* It's fixed ;-)	*/
+
+#define CFG_CONSOLE_INFO_QUIET	1		/* Suppress console info*/
+
+/*------------------------------------------------------------------------
+ * DEBUG
+ *----------------------------------------------------------------------*/
+#undef CONFIG_ROM_STUBS				/* Stubs not in ROM	*/
+
+/*------------------------------------------------------------------------
+ * TIMEBASE --
+ *
+ * The high res timer defaults to 1 msec. Since it includes the period
+ * registers, we can slow it down to 10 msec using TMRCNT. If the default
+ * period is acceptable, TMRCNT can be left undefined.
+ *----------------------------------------------------------------------*/
+#define CFG_NIOS_TMRBASE	0x00920860	/* Tick timer base addr	*/
+#define CFG_NIOS_TMRIRQ		3		/* Timer IRQ num	*/
+#define CFG_NIOS_TMRMS		10		/* 10 msec per tick	*/
+#define CFG_NIOS_TMRCNT	(CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
+#define	CFG_HZ		(CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1))
+
+/*------------------------------------------------------------------------
+ * COMMANDS
+ *----------------------------------------------------------------------*/
+#define CONFIG_COMMANDS		(CFG_CMD_BDI	| \
+				 CFG_CMD_ECHO	| \
+				 CFG_CMD_ENV	| \
+				 CFG_CMD_FLASH	| \
+				 CFG_CMD_IMI	| \
+				 CFG_CMD_IRQ	| \
+				 CFG_CMD_LOADS	| \
+				 CFG_CMD_LOADB	| \
+				 CFG_CMD_MEMORY	| \
+				 CFG_CMD_MISC	| \
+				 CFG_CMD_RUN	| \
+				 CFG_CMD_SAVES	)
+#include <cmd_confdefs.h>
+
+/*------------------------------------------------------------------------
+ * MISC
+ *----------------------------------------------------------------------*/
+#define	CFG_LONGHELP				/* Provide extended help*/
+#define	CFG_PROMPT		"==> "		/* Command prompt	*/
+#define	CFG_CBSIZE		256		/* Console I/O buf size	*/
+#define	CFG_MAXARGS		16	    	/* Max command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE 	/* Boot arg buf size	*/
+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buf size	*/
+#define	CFG_LOAD_ADDR		CFG_SDRAM_BASE	/* Default load address	*/
+#define CFG_MEMTEST_START	CFG_SDRAM_BASE	/* Start addr for test	*/
+#define CFG_MEMTEST_END		CFG_INIT_SP - 0x00020000
+
+#endif	/* __CONFIG_H */

include/configs/PK1C20.h

@@ -0,0 +1,188 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*------------------------------------------------------------------------
+ * BOARD/CPU
+ *----------------------------------------------------------------------*/
+#define CONFIG_PK1C20		1		/* PK1C20 board		*/
+#define CONFIG_SYS_CLK_FREQ	50000000	/* 50 MHz core clk	*/
+
+#define CFG_RESET_ADDR		0x00000000	/* Hard-reset address	*/
+#define CFG_EXCEPTION_ADDR	0x01000020	/* Exception entry point*/
+#define CFG_NIOS_SYSID_BASE	0x00920828	/* System id address	*/
+#define CONFIG_BOARD_EARLY_INIT_F 1	/* enable early board-spec. init*/
+
+/*------------------------------------------------------------------------
+ * CACHE -- the following will support II/s and II/f. The II/s does not
+ * have dcache, so the cache instructions will behave as NOPs.
+ *----------------------------------------------------------------------*/
+#define CFG_ICACHE_SIZE		4096		/* 4 KByte total	*/
+#define CFG_ICACHELINE_SIZE	32		/* 32 bytes/line	*/
+#define CFG_DCACHE_SIZE		2048		/* 2 KByte (II/f)	*/
+#define CFG_DCACHELINE_SIZE	4		/* 4 bytes/line (II/f)	*/
+
+/*------------------------------------------------------------------------
+ * MEMORY BASE ADDRESSES
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_BASE		0x00000000	/* FLASH base addr	*/
+#define CFG_FLASH_SIZE		0x00800000	/* 8 MByte		*/
+#define CFG_SDRAM_BASE		0x01000000	/* SDRAM base addr	*/
+#define CFG_SDRAM_SIZE		0x01000000	/* 16 MByte		*/
+#define CFG_SRAM_BASE		0x00800000	/* SRAM base addr	*/
+#define CFG_SRAM_SIZE		0x00200000	/* 2 MByte		*/
+
+/*------------------------------------------------------------------------
+ * MEMORY ORGANIZATION
+ *	-Monitor at top.
+ *	-The heap is placed below the monitor.
+ *	-Global data is placed below the heap.
+ *	-The stack is placed below global data (&grows down).
+ *----------------------------------------------------------------------*/
+#define CFG_MONITOR_LEN		(128 * 1024)	/* Reserve 128k		*/
+#define CFG_GBL_DATA_SIZE	128		/* Global data size rsvd*/
+#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
+
+#define CFG_MONITOR_BASE	TEXT_BASE
+#define CFG_MALLOC_BASE		(CFG_MONITOR_BASE - CFG_MALLOC_LEN)
+#define CFG_GBL_DATA_OFFSET	(CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP		CFG_GBL_DATA_OFFSET
+
+/*------------------------------------------------------------------------
+ * FLASH (AM29LV065D)
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_FLASH_SECT	128		/* Max # sects per bank */
+#define CFG_MAX_FLASH_BANKS	1		/* Max # of flash banks */
+#define CFG_FLASH_ERASE_TOUT	8000		/* Erase timeout (msec) */
+#define CFG_FLASH_WRITE_TOUT	100		/* Write timeout (msec) */
+#define CFG_FLASH_WORD_SIZE	unsigned char	/* flash word size	*/
+
+/*------------------------------------------------------------------------
+ * ENVIRONMENT -- Put environment in sector CFG_MONITOR_LEN above
+ * CFG_RESET_ADDR, since we assume the monitor is stored at the
+ * reset address, no? This will keep the environment in user region
+ * of flash. NOTE: the monitor length must be multiple of sector size
+ * (which is common practice).
+ *----------------------------------------------------------------------*/
+#define CFG_ENV_IS_IN_FLASH	1		/* Environment in flash */
+#define CFG_ENV_SIZE		(64 * 1024)	/* 64 KByte (1 sector)	*/
+#define CONFIG_ENV_OVERWRITE			/* Serial change Ok	*/
+#define CFG_ENV_ADDR	(CFG_RESET_ADDR + CFG_MONITOR_LEN)
+
+/*------------------------------------------------------------------------
+ * CONSOLE
+ *----------------------------------------------------------------------*/
+#if defined(CONFIG_CONSOLE_JTAG)
+#define CFG_NIOS_CONSOLE	0x00920820	/* JTAG UART base addr	*/
+#else
+#define CFG_NIOS_CONSOLE	0x009208a0	/* UART base addr	*/
+#endif
+
+#define CFG_NIOS_FIXEDBAUD	1		/* Baudrate is fixed	*/
+#define CONFIG_BAUDRATE		115200		/* Initial baudrate	*/
+#define CFG_BAUDRATE_TABLE	{115200}	/* It's fixed ;-)	*/
+
+#define CFG_CONSOLE_INFO_QUIET	1		/* Suppress console info*/
+
+/*------------------------------------------------------------------------
+ * DEBUG
+ *----------------------------------------------------------------------*/
+#undef CONFIG_ROM_STUBS				/* Stubs not in ROM	*/
+
+/*------------------------------------------------------------------------
+ * TIMEBASE --
+ *
+ * The high res timer defaults to 1 msec. Since it includes the period
+ * registers, we can slow it down to 10 msec using TMRCNT. If the default
+ * period is acceptable, TMRCNT can be left undefined.
+ *----------------------------------------------------------------------*/
+#define CFG_NIOS_TMRBASE	0x00920860	/* Tick timer base addr */
+#define CFG_NIOS_TMRIRQ		3		/* Timer IRQ num	*/
+#define CFG_NIOS_TMRMS		10		/* 10 msec per tick	*/
+#define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
+#define CFG_HZ		(CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1))
+
+/*------------------------------------------------------------------------
+ * STATUS LED -- Provides a simple blinking led. For Nios2 each board
+ * must implement its own led routines -- leds are, after all,
+ * board-specific, no?
+ *----------------------------------------------------------------------*/
+#define CFG_LEDPIO_ADDR		0x00920840	/* LED PIO base addr	*/
+#define CONFIG_STATUS_LED			/* Enable status driver */
+
+#define STATUS_LED_BIT		1		/* Bit-0 on PIO		*/
+#define STATUS_LED_STATE	1		/* Blinking		*/
+#define STATUS_LED_PERIOD	(500/CFG_NIOS_TMRMS) /* Every 500 msec	*/
+
+/*------------------------------------------------------------------------
+ * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ...
+ * and really doesn't need any additional clutter. So I choose the lazy
+ * way out to avoid changes there -- define the base address to ensure
+ * cache bypass so there's no need to monkey with inx/outx macros.
+ *----------------------------------------------------------------------*/
+#define CONFIG_SMC91111_BASE	0x80910300	/* Base addr (bypass)	*/
+#define CONFIG_DRIVER_SMC91111			/* Using SMC91c111	*/
+#undef	CONFIG_SMC91111_EXT_PHY			/* Internal PHY		*/
+#define CONFIG_SMC_USE_32_BIT			/* 32-bit interface	*/
+
+#define CONFIG_ETHADDR		08:00:3e:26:0a:5b
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_IPADDR		192.168.2.21
+#define CONFIG_SERVERIP		192.168.2.16
+
+/*------------------------------------------------------------------------
+ * COMMANDS
+ *----------------------------------------------------------------------*/
+#define CONFIG_COMMANDS		(CFG_CMD_BDI	| \
+				 CFG_CMD_DHCP	| \
+				 CFG_CMD_ECHO	| \
+				 CFG_CMD_ENV	| \
+				 CFG_CMD_FLASH	| \
+				 CFG_CMD_IMI	| \
+				 CFG_CMD_IRQ	| \
+				 CFG_CMD_LOADS	| \
+				 CFG_CMD_LOADB	| \
+				 CFG_CMD_MEMORY | \
+				 CFG_CMD_MISC	| \
+				 CFG_CMD_NET	| \
+				 CFG_CMD_PING	| \
+				 CFG_CMD_RUN	| \
+				 CFG_CMD_SAVES	)
+#include <cmd_confdefs.h>
+
+/*------------------------------------------------------------------------
+ * MISC
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP				/* Provide extended help*/
+#define CFG_PROMPT		"==> "		/* Command prompt	*/
+#define CFG_CBSIZE		256		/* Console I/O buf size */
+#define CFG_MAXARGS		16		/* Max command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot arg buf size	*/
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buf size */
+#define CFG_LOAD_ADDR		CFG_SDRAM_BASE	/* Default load address */
+#define CFG_MEMTEST_START	CFG_SDRAM_BASE	/* Start addr for test	*/
+#define CFG_MEMTEST_END		CFG_INIT_SP - 0x00020000
+
+#endif	/* __CONFIG_H */

include/image.h

@@ -67,6 +67,7 @@
 #define IH_CPU_M68K		12	/* M68K		*/
 #define IH_CPU_NIOS		13	/* Nios-32	*/
 #define IH_CPU_MICROBLAZE	14	/* MicroBlaze   */
+#define IH_CPU_NIOS2		15	/* Nios-II	*/
 
 /*
  * Image Types

include/nios2-io.h

@@ -0,0 +1,200 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*************************************************************************
+ * Altera Nios2 Standard Peripherals
+ ************************************************************************/
+
+#ifndef __NIOS2IO_H__
+#define __NIOS2IO_H__
+
+/*------------------------------------------------------------------------
+ * UART (http://www.altera.com/literature/ds/ds_nios_uart.pdf)
+ *----------------------------------------------------------------------*/
+typedef volatile struct nios_uart_t {
+	unsigned	rxdata;		/* Rx data reg */
+	unsigned	txdata;		/* Tx data reg */
+	unsigned	status;		/* Status reg */
+	unsigned	control;	/* Control reg */
+	unsigned	divisor;	/* Baud rate divisor reg */
+	unsigned	endofpacket;	/* End-of-packet reg */
+}nios_uart_t;
+
+/* status register */
+#define NIOS_UART_PE		(1 << 0)	/* parity error */
+#define NIOS_UART_FE		(1 << 1)	/* frame error */
+#define NIOS_UART_BRK		(1 << 2)	/* break detect */
+#define NIOS_UART_ROE		(1 << 3)	/* rx overrun */
+#define NIOS_UART_TOE		(1 << 4)	/* tx overrun */
+#define NIOS_UART_TMT		(1 << 5)	/* tx empty */
+#define NIOS_UART_TRDY		(1 << 6)	/* tx ready */
+#define NIOS_UART_RRDY		(1 << 7)	/* rx ready */
+#define NIOS_UART_E		(1 << 8)	/* exception */
+#define NIOS_UART_DCTS		(1 << 10)	/* cts change */
+#define NIOS_UART_CTS		(1 << 11)	/* cts */
+#define NIOS_UART_EOP		(1 << 12)	/* eop detected */
+
+/* control register */
+#define NIOS_UART_IPE		(1 << 0)	/* parity error int ena*/
+#define NIOS_UART_IFE		(1 << 1)	/* frame error int ena */
+#define NIOS_UART_IBRK		(1 << 2)	/* break detect int ena */
+#define NIOS_UART_IROE		(1 << 3)	/* rx overrun int ena */
+#define NIOS_UART_ITOE		(1 << 4)	/* tx overrun int ena */
+#define NIOS_UART_ITMT		(1 << 5)	/* tx empty int ena */
+#define NIOS_UART_ITRDY		(1 << 6)	/* tx ready int ena */
+#define NIOS_UART_IRRDY		(1 << 7)	/* rx ready int ena */
+#define NIOS_UART_IE		(1 << 8)	/* exception int ena */
+#define NIOS_UART_TBRK		(1 << 9)	/* transmit break */
+#define NIOS_UART_IDCTS		(1 << 10)	/* cts change int ena */
+#define NIOS_UART_RTS		(1 << 11)	/* rts */
+#define NIOS_UART_IEOP		(1 << 12)	/* eop detected int ena */
+
+
+/*------------------------------------------------------------------------
+ * TIMER (http://www.altera.com/literature/ds/ds_nios_timer.pdf)
+ *----------------------------------------------------------------------*/
+typedef volatile struct nios_timer_t {
+	unsigned	status;			/* Timer status reg */
+	unsigned	control;		/* Timer control reg */
+	unsigned	periodl;		/* Timeout period low */
+	unsigned	periodh;		/* Timeout period high */
+	unsigned	snapl;			/* Snapshot low */
+	unsigned	snaph;			/* Snapshot high */
+}nios_timer_t;
+
+/* status register */
+#define NIOS_TIMER_TO		(1 << 0)	/* Timeout */
+#define NIOS_TIMER_RUN		(1 << 1)	/* Timer running */
+
+/* control register */
+#define NIOS_TIMER_ITO		(1 << 0)	/* Timeout int ena */
+#define NIOS_TIMER_CONT		(1 << 1)	/* Continuous mode */
+#define NIOS_TIMER_START	(1 << 2)	/* Start timer */
+#define NIOS_TIMER_STOP		(1 << 3)	/* Stop timer */
+
+
+/*------------------------------------------------------------------------
+ * PIO (http://www.altera.com/literature/ds/ds_nios_pio.pdf)
+ *----------------------------------------------------------------------*/
+typedef volatile struct nios_pio_t {
+	unsigned int	data;		/* Data value at each PIO in/out */
+	unsigned int	direction;	/* Data direct. for each PIO bit */
+	unsigned int	interruptmask;	/* Per-bit IRQ enable/disable */
+	unsigned int	edgecapture;	/* Per-bit sync. edge detect & hold */
+}nios_pio_t;
+
+/* direction register */
+#define NIOS_PIO_OUT		(1)		/* PIO bit is output */
+#define NIOS_PIO_IN		(0)		/* PIO bit is input */
+
+
+/*------------------------------------------------------------------------
+ * SPI (http://www.altera.com/literature/ds/ds_nios_spi.pdf)
+ *----------------------------------------------------------------------*/
+typedef volatile struct nios_spi_t {
+	unsigned	rxdata;		/* Rx data reg */
+	unsigned	txdata;		/* Tx data reg */
+	unsigned	status;		/* Status reg */
+	unsigned	control;	/* Control reg */
+	unsigned	reserved;	/* (master only) */
+	unsigned	slaveselect;	/* SPI slave select mask (master only) */
+}nios_spi_t;
+
+/* status register */
+#define NIOS_SPI_ROE		(1 << 3)	/* rx overrun */
+#define NIOS_SPI_TOE		(1 << 4)	/* tx overrun */
+#define NIOS_SPI_TMT		(1 << 5)	/* tx empty */
+#define NIOS_SPI_TRDY		(1 << 6)	/* tx ready */
+#define NIOS_SPI_RRDY		(1 << 7)	/* rx ready */
+#define NIOS_SPI_E		(1 << 8)	/* exception */
+
+/* control register */
+#define NIOS_SPI_IROE		(1 << 3)	/* rx overrun int ena */
+#define NIOS_SPI_ITOE		(1 << 4)	/* tx overrun int ena */
+#define NIOS_SPI_ITRDY		(1 << 6)	/* tx ready int ena */
+#define NIOS_SPI_IRRDY		(1 << 7)	/* rx ready int ena */
+#define NIOS_SPI_IE		(1 << 8)	/* exception int ena */
+#define NIOS_SPI_SSO		(1 << 10)	/* override SS_n output */
+
+/*------------------------------------------------------------------------
+ * ASMI
+ *----------------------------------------------------------------------*/
+typedef volatile struct nios_asmi_t {
+	unsigned	rxdata;		/* Rx data reg */
+	unsigned	txdata;		/* Tx data reg */
+	unsigned	status;		/* Status reg */
+	unsigned	control;	/* Control reg */
+	unsigned	reserved;
+	unsigned	slavesel;	/* Slave select */
+	unsigned	endofpacket;	/* End-of-packet reg */
+}nios_asmi_t;
+
+/* status register */
+#define NIOS_ASMI_ROE		(1 << 3)	/* rx overrun */
+#define NIOS_ASMI_TOE		(1 << 4)	/* tx overrun */
+#define NIOS_ASMI_TMT		(1 << 5)	/* tx empty */
+#define NIOS_ASMI_TRDY		(1 << 6)	/* tx ready */
+#define NIOS_ASMI_RRDY		(1 << 7)	/* rx ready */
+#define NIOS_ASMI_E		(1 << 8)	/* exception */
+#define NIOS_ASMI_EOP		(1 << 9)	/* eop detected */
+
+/* control register */
+#define NIOS_ASMI_IROE		(1 << 3)	/* rx overrun int ena */
+#define NIOS_ASMI_ITOE		(1 << 4)	/* tx overrun int ena */
+#define NIOS_ASMI_ITRDY		(1 << 6)	/* tx ready int ena */
+#define NIOS_ASMI_IRRDY		(1 << 7)	/* rx ready int ena */
+#define NIOS_ASMI_IE		(1 << 8)	/* exception int ena */
+#define NIOS_ASMI_IEOP		(1 << 9)	/* rx eop int ena */
+#define NIOS_ASMI_SSO		(1 << 10)	/* slave select enable */
+
+/*------------------------------------------------------------------------
+ * JTAG UART
+ *----------------------------------------------------------------------*/
+typedef volatile struct nios_jtag_t {
+	unsigned	data;			/* Data register */
+	unsigned	control;		/* Control register */
+}nios_jtag_t;
+
+/* data register */
+#define NIOS_JTAG_RVALID	(1<<15)		/* Read valid */
+#define NIOS_JTAG_DATA(d)	((d)&0x0ff)	/* Read data */
+#define NIOS_JTAG_RAVAIL(d)	((d)>>16)	/* Read space avail */
+
+/* control register */
+#define NIOS_JTAG_RE		(1 << 0)	/* read intr enable */
+#define NIOS_JTAG_WE		(1 << 1)	/* write intr enable */
+#define NIOS_JTAG_RI		(1 << 8)	/* read intr pending */
+#define NIOS_JTAG_WI		(1 << 9)	/* write intr pending*/
+#define NIOS_JTAG_AC		(1 << 10)	/* activity indicator */
+#define NIOS_JTAG_RRDY		(1 << 12)	/* read available */
+#define NIOS_JTAG_WSPACE(d) 	((d)>>16)	/* Write space avail */
+
+/*------------------------------------------------------------------------
+ * SYSTEM ID
+ *----------------------------------------------------------------------*/
+typedef volatile struct nios_sysid_t {
+	unsigned 	id;			/* The system build id*/
+	unsigned 	timestamp;		/* Timestamp */
+}nios_sysid_t;
+
+#endif /* __NIOS2IO_H__ */

include/nios2.h

@@ -0,0 +1,63 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __NIOS2_H__
+#define __NIOS2_H__
+
+/*------------------------------------------------------------------------
+ * Control registers -- use with wrctl() & rdctl()
+ *----------------------------------------------------------------------*/
+#define CTL_STATUS	0		/* Processor status reg		*/
+#define CTL_ESTATUS	1		/* Exception status reg		*/
+#define CTL_BSTATUS	2		/* Break status reg		*/
+#define CTL_IENABLE	3		/* Interrut enable reg		*/
+#define CTL_IPENDING	4		/* Interrut pending reg		*/
+
+/*------------------------------------------------------------------------
+ * Access to control regs
+ *----------------------------------------------------------------------*/
+#define _str_(x) #x
+
+#define rdctl(reg)\
+	({unsigned int val;\
+	asm volatile( "rdctl %0, ctl" _str_(reg)\
+		: "=r" (val) ); val;})
+
+#define wrctl(reg,val)\
+	asm volatile( "wrctl ctl" _str_(reg) ",%0"\
+		: : "r" (val))
+
+/*------------------------------------------------------------------------
+ * Control reg bit masks
+ *----------------------------------------------------------------------*/
+#define STATUS_IE	(1<<0)		/* Interrupt enable		*/
+#define STATUS_U	(1<<1)		/* User-mode			*/
+
+/*------------------------------------------------------------------------
+ * Bit-31 Cache bypass -- only valid for data access. When data cache
+ * is not implemented, bit 31 is ignored for compatibility.
+ *----------------------------------------------------------------------*/
+#define CACHE_BYPASS(a) ((a) | 0x80000000)
+#define CACHE_NO_BYPASS(a) ((a) & ~0x80000000)
+
+#endif /* __NIOS2_H__ */

include/status_led.h

@@ -340,6 +340,9 @@ void status_led_set  (int led, int state);
 #elif defined(CONFIG_WRSBC8240)
 /* XXX empty just to avoid the error */
 /************************************************************************/
+#elif defined(CONFIG_NIOS2)
+/* XXX empty just to avoid the error */
+/************************************************************************/
 #else
 # error Status LED configuration missing
 #endif

lib_nios2/Makefile

@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(ARCH).a
+
+AOBJS	= cache.o
+
+COBJS	= board.o divmod.o nios_linux.o mult.o time.o
+
+OBJS	= $(AOBJS) $(COBJS)
+
+$(LIB):	.depend $(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend:	Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################

lib_nios2/board.c

@@ -0,0 +1,184 @@
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <devices.h>
+#include <watchdog.h>
+#include <net.h>
+#ifdef CONFIG_STATUS_LED
+#include <status_led.h>
+#endif
+
+
+/*
+ * All attempts to come up with a "common" initialization sequence
+ * that works for all boards and architectures failed: some of the
+ * requirements are just _too_ different. To get rid of the resulting
+ * mess of board dependend #ifdef'ed code we now make the whole
+ * initialization sequence configurable to the user.
+ *
+ * The requirements for any new initalization function is simple: it
+ * receives a pointer to the "global data" structure as it's only
+ * argument, and returns an integer return code, where 0 means
+ * "continue" and != 0 means "fatal error, hang the system".
+ */
+
+
+extern void malloc_bin_reloc (void);
+typedef int (init_fnc_t) (void);
+
+/*
+ * Begin and End of memory area for malloc(), and current "brk"
+ */
+static	ulong	mem_malloc_start = 0;
+static	ulong	mem_malloc_end	 = 0;
+static	ulong	mem_malloc_brk	 = 0;
+
+/*
+ * The Malloc area is immediately below the monitor copy in RAM
+ */
+static void mem_malloc_init (void)
+{
+	mem_malloc_start = CFG_MALLOC_BASE;
+	mem_malloc_end = mem_malloc_start + CFG_MALLOC_LEN;
+	mem_malloc_brk = mem_malloc_start;
+	memset ((void *) mem_malloc_start,
+		0,
+		mem_malloc_end - mem_malloc_start);
+}
+
+void *sbrk (ptrdiff_t increment)
+{
+	ulong old = mem_malloc_brk;
+	ulong new = old + increment;
+
+	if ((new < mem_malloc_start) || (new > mem_malloc_end)) {
+		return (NULL);
+	}
+	mem_malloc_brk = new;
+	return ((void *) old);
+}
+
+
+/************************************************************************
+ * Initialization sequence						*
+ ***********************************************************************/
+
+init_fnc_t *init_sequence[] = {
+
+#if defined(CONFIG_BOARD_EARLY_INIT_F)
+	board_early_init_f,	/* Call board-specific init code early.*/
+#endif
+
+	env_init,
+	serial_init,
+	console_init_f,
+	display_options,
+	checkcpu,
+	checkboard,
+	NULL,			/* Terminate this list */
+};
+
+
+/***********************************************************************/
+void board_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	bd_t *bd;
+	init_fnc_t **init_fnc_ptr;
+	char *s, *e;
+	int i;
+
+	/* Pointer is writable since we allocated a register for it.
+	 * Nios treats CFG_GBL_DATA_OFFSET as an address.
+	 */
+	gd = (gd_t *)CFG_GBL_DATA_OFFSET;
+	/* compiler optimization barrier needed for GCC >= 3.4 */
+	__asm__ __volatile__("": : :"memory");
+
+	memset( gd, 0, CFG_GBL_DATA_SIZE );
+
+	gd->bd = (bd_t *)(gd+1);	/* At end of global data */
+	gd->baudrate = CONFIG_BAUDRATE;
+	gd->cpu_clk = CONFIG_SYS_CLK_FREQ;
+
+	bd = gd->bd;
+	bd->bi_memstart	= CFG_SDRAM_BASE;
+	bd->bi_memsize = CFG_SDRAM_SIZE;
+	bd->bi_flashstart = CFG_FLASH_BASE;
+#if	defined(CFG_SRAM_BASE) && defined(CFG_SRAM_SIZE)
+	bd->bi_sramstart= CFG_SRAM_BASE;
+	bd->bi_sramsize	= CFG_SRAM_SIZE;
+#endif
+	bd->bi_baudrate	= CONFIG_BAUDRATE;
+
+	for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
+		WATCHDOG_RESET ();
+		if ((*init_fnc_ptr) () != 0) {
+			hang ();
+		}
+	}
+
+	WATCHDOG_RESET ();
+	bd->bi_flashsize = flash_init();
+
+	WATCHDOG_RESET ();
+	mem_malloc_init();
+	malloc_bin_reloc();
+	env_relocate();
+
+	bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
+	s = getenv ("ethaddr");
+	for (i = 0; i < 6; ++i) {
+		bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0;
+		if (s) s = (*e) ? e + 1 : e;
+	}
+
+	WATCHDOG_RESET ();
+	devices_init();
+	jumptable_init();
+	console_init_r();
+
+	WATCHDOG_RESET ();
+	interrupt_init ();
+
+	/* main_loop */
+	for (;;) {
+		WATCHDOG_RESET ();
+		main_loop ();
+	}
+}
+
+
+/***********************************************************************/
+
+void hang (void)
+{
+	disable_interrupts ();
+	puts("### ERROR ### Please reset board ###\n");
+	for (;;);
+}

lib_nios2/cache.S

@@ -0,0 +1,74 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+	.text
+
+	.global flush_dcache
+
+flush_dcache:
+	add	r5, r5, r4
+	movhi	r8, %hi(CFG_DCACHELINE_SIZE)
+	ori	r8, r8, %lo(CFG_DCACHELINE_SIZE)
+0:	flushd	0(r4)
+	add	r4, r4, r8
+	bltu	r4, r5, 0b
+	ret
+
+
+	.global flush_icache
+
+flush_icache:
+	add	r5, r5, r4
+	movhi	r8, %hi(CFG_ICACHELINE_SIZE)
+	ori	r8, r8, %lo(CFG_ICACHELINE_SIZE)
+1:	flushi	r4
+	add	r4, r4, r8
+	bltu	r4, r5, 1b
+	ret
+
+	.global flush_cache
+
+flush_cache:
+	add	r5, r5, r4
+	mov	r9, r4
+	mov	r10, r5
+
+	movhi	r8, %hi(CFG_DCACHELINE_SIZE)
+	ori	r8, r8, %lo(CFG_DCACHELINE_SIZE)
+0:	flushd	0(r4)
+	add	r4, r4, r8
+	bltu	r4, r5, 0b
+
+	mov	r4, r9
+	mov	r5, r10
+	movhi	r8, %hi(CFG_ICACHELINE_SIZE)
+	ori	r8, r8, %lo(CFG_ICACHELINE_SIZE)
+1:	flushi	r4
+	add	r4, r4, r8
+	bltu	r4, r5, 1b
+
+	sync
+	flushp
+	ret

lib_nios2/divmod.c

@@ -0,0 +1,101 @@
+/*
+ * This file is part of GNU CC.
+ *
+ * GNU CC is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; either version 2, or (at your
+ * option) any later version.
+ *
+ * GNU CC is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with GNU CC; see the file COPYING.  If not, write
+ * to the Free Software Foundation, 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ */
+
+
+#include "math.h"
+
+USItype udivmodsi4 (USItype num, USItype den, word_type modwanted)
+{
+	USItype bit = 1;
+	USItype res = 0;
+
+	while (den < num && bit && !(den & (1L << 31))) {
+		den <<= 1;
+		bit <<= 1;
+	}
+	while (bit) {
+		if (num >= den) {
+			num -= den;
+			res |= bit;
+		}
+		bit >>= 1;
+		den >>= 1;
+	}
+	if (modwanted)
+		return num;
+	return res;
+}
+
+
+SItype __divsi3 (SItype a, SItype b)
+{
+	word_type neg = 0;
+	SItype res;
+
+	if (a < 0) {
+		a = -a;
+		neg = !neg;
+	}
+
+	if (b < 0) {
+		b = -b;
+		neg = !neg;
+	}
+
+	res = udivmodsi4 (a, b, 0);
+
+	if (neg)
+		res = -res;
+
+	return res;
+}
+
+
+SItype __modsi3 (SItype a, SItype b)
+{
+	word_type neg = 0;
+	SItype res;
+
+	if (a < 0) {
+		a = -a;
+		neg = 1;
+	}
+
+	if (b < 0)
+		b = -b;
+
+	res = udivmodsi4 (a, b, 1);
+
+	if (neg)
+		res = -res;
+
+	return res;
+}
+
+
+SItype __udivsi3 (SItype a, SItype b)
+{
+	return udivmodsi4 (a, b, 0);
+}
+
+
+SItype __umodsi3 (SItype a, SItype b)
+{
+	return udivmodsi4 (a, b, 1);
+}

lib_nios2/math.h

@@ -0,0 +1,16 @@
+#define BITS_PER_UNIT	8
+
+typedef 	 int HItype		__attribute__ ((mode (HI)));
+typedef unsigned int UHItype		__attribute__ ((mode (HI)));
+
+typedef		 int SItype		__attribute__ ((mode (SI)));
+typedef unsigned int USItype		__attribute__ ((mode (SI)));
+
+typedef int word_type			__attribute__ ((mode (__word__)));
+
+struct SIstruct {HItype low, high;};
+
+typedef union {
+	struct SIstruct s;
+	SItype ll;
+} SIunion;

lib_nios2/mult.c

@@ -0,0 +1,56 @@
+/*
+ * This file is part of GNU CC.
+ *
+ * GNU CC is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; either version 2, or (at your
+ * option) any later version.
+ *
+ * GNU CC is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with GNU CC; see the file COPYING.  If not, write
+ * to the Free Software Foundation, 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ */
+
+
+#include <common.h>
+
+#if !defined(CFG_NIOS_MULT_HW) && !defined(CFG_NIOS_MULT_MSTEP)
+
+#include "math.h"
+
+USItype __mulsi3 (USItype a, USItype b)
+{
+	USItype c = 0;
+
+	while (a != 0) {
+		if (a & 1)
+			c += b;
+		a >>= 1;
+		b <<= 1;
+	}
+
+	return c;
+}
+
+
+UHItype __mulhi3 (UHItype a, UHItype b)
+{
+	UHItype c = 0;
+
+	while (a != 0) {
+		if (a & 1)
+			c += b;
+		a >>= 1;
+		b <<= 1;
+	}
+
+	return c;
+}
+
+#endif /*!defined(CFG_NIOS_MULT_HW) && !defined(CFG_NIOS_MULT_MSTEP) */

lib_nios2/nios_linux.c

@@ -0,0 +1,32 @@
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+
+/* TODO
+ */
+void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
+		ulong addr, ulong *len_ptr, int   verify)
+{
+}

lib_nios2/time.c

@@ -0,0 +1,39 @@
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+
+
+extern void dly_clks( unsigned long ticks );
+
+void udelay(unsigned long usec)
+{
+	/* The Nios core doesn't have a timebase, so we do our
+	 * best for now and call a low-level loop that counts
+	 * cpu clocks.
+	 */
+	unsigned long cnt = (CONFIG_SYS_CLK_FREQ/1000000) * usec;
+	WATCHDOG_RESET ();	/* trigger watchdog if needed */
+	dly_clks (cnt);
+}

nios2_config.mk

@@ -0,0 +1,26 @@
+#
+# (C) Copyright 2004
+# Psyent Corporation <www.psyent.com>
+# Scott McNutt <smcnutt@psyent.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_CPPFLAGS += -DCONFIG_NIOS2 -D__NIOS2__
+PLATFORM_CPPFLAGS += -ffixed-r15