Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

ARM: remove broken "mx1fs2" board

Browse Source 
Signed-off-by: Wolfgang Denk <wd@denx.de>
master
Wolfgang Denk 14 years ago committed by Albert ARIBAUD
parent 957731eda0
commit 69624195a3
10 changed files with 1 additions and 1626 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 1
      MAKEALL
  2. 51
      board/mx1fs2/Makefile
  3. 10
      board/mx1fs2/config.mk
  4. 849
      board/mx1fs2/flash.c
  5. 99
      board/mx1fs2/intel.h
  6. 188
      board/mx1fs2/lowlevel_init.S
  7. 122
      board/mx1fs2/mx1fs2.c
  8. 1
      boards.cfg
  9. 1
      doc/README.scrapyard
  10. 305
      include/configs/mx1fs2.h

1
MAKEALL
Unescape View File

@ -326,7 +326,6 @@ LIST_ARM9=" \
magnesium \
mv88f6281gtw_ge \
mx1ads \
mx1fs2 \
netstar \
nhk8815 \
nhk8815_onenand \

51
board/mx1fs2/Makefile
Unescape View File

@ -1,51 +0,0 @@
#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
COBJS := mx1fs2.o flash.o
SOBJS := lowlevel_init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
distclean: clean
rm -f $(LIB) core *.bak $(obj).depend
#########################################################################
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
#########################################################################

10
board/mx1fs2/config.mk
Unescape View File

@ -1,10 +0,0 @@
#
# This config file is used for compilation of IMX sources
#
# You might change location of U-Boot in memory by setting right CONFIG_SYS_TEXT_BASE.
# This allows for example having one copy located at the end of ram and stored
# in flash device and later on while developing use other location to test
# the code in RAM device only.
#
CONFIG_SYS_TEXT_BASE = 0x08f00000

849
board/mx1fs2/flash.c
Unescape View File

@ -1,849 +0,0 @@
/*
* (C) 2000-2004 Wolfgang Denk, DENX Software Engineering, wd@denx.de.
* (C) 2003 August Hoeraendl, Logotronic GmbH
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#undef CONFIG_FLASH_16BIT
#include <common.h>
#define FLASH_BANK_SIZE MX1FS2_FLASH_BANK_SIZE
#define MAIN_SECT_SIZE MX1FS2_FLASH_SECT_SIZE
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*
* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
* has nothing to do with the flash chip being 8-bit or 16-bit.
*/
#ifdef CONFIG_FLASH_16BIT
typedef unsigned short FLASH_PORT_WIDTH;
typedef volatile unsigned short FLASH_PORT_WIDTHV;
#define FLASH_ID_MASK 0xFFFF
#else
typedef unsigned long FLASH_PORT_WIDTH;
typedef volatile unsigned long FLASH_PORT_WIDTHV;
#define FLASH_ID_MASK 0xFFFFFFFF
#endif
#define FPW FLASH_PORT_WIDTH
#define FPWV FLASH_PORT_WIDTHV
#define ORMASK(size) ((-size) & OR_AM_MSK)
/*-----------------------------------------------------------------------
* Functions
*/
#if 0
static ulong flash_get_size(FPWV * addr, flash_info_t * info);
static void flash_get_offsets(ulong base, flash_info_t * info);
#endif
static void flash_reset(flash_info_t * info);
static int write_word_intel(flash_info_t * info, FPWV * dest, FPW data);
static int write_word_amd(flash_info_t * info, FPWV * dest, FPW data);
#define write_word(in, de, da) write_word_amd(in, de, da)
#ifdef CONFIG_SYS_FLASH_PROTECTION
static void flash_sync_real_protect(flash_info_t * info);
#endif
/*-----------------------------------------------------------------------
* flash_init()
*
* sets up flash_info and returns size of FLASH (bytes)
*/
ulong
flash_init(void)
{
int i, j;
ulong size = 0;
for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
ulong flashbase = 0;
flash_info[i].flash_id =
(FLASH_MAN_AMD & FLASH_VENDMASK) |
(FLASH_AM640U & FLASH_TYPEMASK);
flash_info[i].size = FLASH_BANK_SIZE;
flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
switch (i) {
case 0:
flashbase = MX1FS2_FLASH_BASE;
break;
default:
panic("configured too many flash banks!\n");
break;
}
for (j = 0; j < flash_info[i].sector_count; j++) {
flash_info[i].start[j] = flashbase + j * MAIN_SECT_SIZE;
}
size += flash_info[i].size;
}
/* Protect monitor and environment sectors */
flash_protect(FLAG_PROTECT_SET,
CONFIG_SYS_FLASH_BASE,
CONFIG_SYS_FLASH_BASE + _bss_start - _armboot_start,
&flash_info[0]);
flash_protect(FLAG_PROTECT_SET,
CONFIG_ENV_ADDR,
CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
return size;
}
/*-----------------------------------------------------------------------
*/
static void
flash_reset(flash_info_t * info)
{
FPWV *base = (FPWV *) (info->start[0]);
/* Put FLASH back in read mode */
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
*base = (FPW) 0x00FF00FF; /* Intel Read Mode */
else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
*base = (FPW) 0x00F000F0; /* AMD Read Mode */
}
/*-----------------------------------------------------------------------
*/
#if 0
static void
flash_get_offsets(ulong base, flash_info_t * info)
{
int i;
/* set up sector start address table */
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL
&& (info->flash_id & FLASH_BTYPE)) {
int bootsect_size; /* number of bytes/boot sector */
int sect_size; /* number of bytes/regular sector */
bootsect_size = 0x00002000 * (sizeof (FPW) / 2);
sect_size = 0x00010000 * (sizeof (FPW) / 2);
/* set sector offsets for bottom boot block type */
for (i = 0; i < 8; ++i) {
info->start[i] = base + (i * bootsect_size);
}
for (i = 8; i < info->sector_count; i++) {
info->start[i] = base + ((i - 7) * sect_size);
}
} else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD
&& (info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U) {
int sect_size; /* number of bytes/sector */
sect_size = 0x00010000 * (sizeof (FPW) / 2);
/* set up sector start address table (uniform sector type) */
for (i = 0; i < info->sector_count; i++)
info->start[i] = base + (i * sect_size);
}
}
#endif /* 0 */
/*-----------------------------------------------------------------------
*/
void
flash_print_info(flash_info_t * info)
{
int i;
uchar *boottype;
uchar *bootletter;
char *fmt;
uchar botbootletter[] = "B";
uchar topbootletter[] = "T";
uchar botboottype[] = "bottom boot sector";
uchar topboottype[] = "top boot sector";
if (info->flash_id == FLASH_UNKNOWN) {
printf("missing or unknown FLASH type\n");
return;
}
switch (info->flash_id & FLASH_VENDMASK) {
case FLASH_MAN_AMD:
printf("AMD ");
break;
case FLASH_MAN_BM:
printf("BRIGHT MICRO ");
break;
case FLASH_MAN_FUJ:
printf("FUJITSU ");
break;
case FLASH_MAN_SST:
printf("SST ");
break;
case FLASH_MAN_STM:
printf("STM ");
break;
case FLASH_MAN_INTEL:
printf("INTEL ");
break;
default:
printf("Unknown Vendor ");
break;
}
/* check for top or bottom boot, if it applies */
if (info->flash_id & FLASH_BTYPE) {
boottype = botboottype;
bootletter = botbootletter;
} else {
boottype = topboottype;
bootletter = topbootletter;
}
switch (info->flash_id & FLASH_TYPEMASK) {
case FLASH_AM640U:
fmt = "29LV641D (64 Mbit, uniform sectors)\n";
break;
case FLASH_28F800C3B:
case FLASH_28F800C3T:
fmt = "28F800C3%s (8 Mbit, %s)\n";
break;
case FLASH_INTEL800B:
case FLASH_INTEL800T:
fmt = "28F800B3%s (8 Mbit, %s)\n";
break;
case FLASH_28F160C3B:
case FLASH_28F160C3T:
fmt = "28F160C3%s (16 Mbit, %s)\n";
break;
case FLASH_INTEL160B:
case FLASH_INTEL160T:
fmt = "28F160B3%s (16 Mbit, %s)\n";
break;
case FLASH_28F320C3B:
case FLASH_28F320C3T:
fmt = "28F320C3%s (32 Mbit, %s)\n";
break;
case FLASH_INTEL320B:
case FLASH_INTEL320T:
fmt = "28F320B3%s (32 Mbit, %s)\n";
break;
case FLASH_28F640C3B:
case FLASH_28F640C3T:
fmt = "28F640C3%s (64 Mbit, %s)\n";
break;
case FLASH_INTEL640B:
case FLASH_INTEL640T:
fmt = "28F640B3%s (64 Mbit, %s)\n";
break;
default:
fmt = "Unknown Chip Type\n";
break;
}
printf(fmt, bootletter, boottype);
printf(" Size: %ld MB in %d Sectors\n",
info->size >> 20, info->sector_count);
printf(" Sector Start Addresses:");
for (i = 0; i < info->sector_count; ++i) {
if ((i % 5) == 0) {
printf("\n ");
}
printf(" %08lX%s", info->start[i],
info->protect[i] ? " (RO)" : " ");
}
printf("\n");
}
/*-----------------------------------------------------------------------
*/
/*
* The following code cannot be run from FLASH!
*/
#if 0
ulong
flash_get_size(FPWV * addr, flash_info_t * info)
{
/* Write auto select command: read Manufacturer ID */
/* Write auto select command sequence and test FLASH answer */
addr[0x0555] = (FPW) 0x00AA00AA; /* for AMD, Intel ignores this */
addr[0x02AA] = (FPW) 0x00550055; /* for AMD, Intel ignores this */
addr[0x0555] = (FPW) 0x00900090; /* selects Intel or AMD */
/* The manufacturer codes are only 1 byte, so just use 1 byte.
* This works for any bus width and any FLASH device width.
*/
switch (addr[0] & 0xff) {
case (uchar) AMD_MANUFACT:
info->flash_id = FLASH_MAN_AMD;
break;
case (uchar) INTEL_MANUFACT:
info->flash_id = FLASH_MAN_INTEL;
break;
default:
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
break;
}
/* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
if (info->flash_id != FLASH_UNKNOWN)
switch (addr[1]) {
case (FPW) AMD_ID_LV640U: /* 29LV640 and 29LV641 have same ID */
info->flash_id += FLASH_AM640U;
info->sector_count = 128;
info->size = 0x00800000 * (sizeof (FPW) / 2);
break; /* => 8 or 16 MB */
case (FPW) INTEL_ID_28F800C3B:
info->flash_id += FLASH_28F800C3B;
info->sector_count = 23;
info->size = 0x00100000 * (sizeof (FPW) / 2);
break; /* => 1 or 2 MB */
case (FPW) INTEL_ID_28F800B3B:
info->flash_id += FLASH_INTEL800B;
info->sector_count = 23;
info->size = 0x00100000 * (sizeof (FPW) / 2);
break; /* => 1 or 2 MB */
case (FPW) INTEL_ID_28F160C3B:
info->flash_id += FLASH_28F160C3B;
info->sector_count = 39;
info->size = 0x00200000 * (sizeof (FPW) / 2);
break; /* => 2 or 4 MB */
case (FPW) INTEL_ID_28F160B3B:
info->flash_id += FLASH_INTEL160B;
info->sector_count = 39;
info->size = 0x00200000 * (sizeof (FPW) / 2);
break; /* => 2 or 4 MB */
case (FPW) INTEL_ID_28F320C3B:
info->flash_id += FLASH_28F320C3B;
info->sector_count = 71;
info->size = 0x00400000 * (sizeof (FPW) / 2);
break; /* => 4 or 8 MB */
case (FPW) INTEL_ID_28F320B3B:
info->flash_id += FLASH_INTEL320B;
info->sector_count = 71;
info->size = 0x00400000 * (sizeof (FPW) / 2);
break; /* => 4 or 8 MB */
case (FPW) INTEL_ID_28F640C3B:
info->flash_id += FLASH_28F640C3B;
info->sector_count = 135;
info->size = 0x00800000 * (sizeof (FPW) / 2);
break; /* => 8 or 16 MB */
case (FPW) INTEL_ID_28F640B3B:
info->flash_id += FLASH_INTEL640B;
info->sector_count = 135;
info->size = 0x00800000 * (sizeof (FPW) / 2);
break; /* => 8 or 16 MB */
default:
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
return (0); /* => no or unknown flash */
}
flash_get_offsets((ulong) addr, info);
/* Put FLASH back in read mode */
flash_reset(info);
return (info->size);
}
#endif /* 0 */
#ifdef CONFIG_SYS_FLASH_PROTECTION
/*-----------------------------------------------------------------------
*/
static void
flash_sync_real_protect(flash_info_t * info)
{
FPWV *addr = (FPWV *) (info->start[0]);
FPWV *sect;
int i;
switch (info->flash_id & FLASH_TYPEMASK) {
case FLASH_28F800C3B:
case FLASH_28F800C3T:
case FLASH_28F160C3B:
case FLASH_28F160C3T:
case FLASH_28F320C3B:
case FLASH_28F320C3T:
case FLASH_28F640C3B:
case FLASH_28F640C3T:
/* check for protected sectors */
*addr = (FPW) 0x00900090;
for (i = 0; i < info->sector_count; i++) {
/* read sector protection at sector address, (A7 .. A0) = 0x02.
* D0 = 1 for each device if protected.
* If at least one device is protected the sector is marked
* protected, but mixed protected and unprotected devices
* within a sector should never happen.
*/
sect = (FPWV *) (info->start[i]);
info->protect[i] =
(sect[2] & (FPW) (0x00010001)) ? 1 : 0;
}
/* Put FLASH back in read mode */
flash_reset(info);
break;
case FLASH_AM640U:
default:
/* no hardware protect that we support */
break;
}
}
#endif
/*-----------------------------------------------------------------------
*/
int
flash_erase(flash_info_t * info, int s_first, int s_last)
{
FPWV *addr;
int flag, prot, sect;
int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL;
ulong start, now, last;
int rcode = 0;
if ((s_first < 0) || (s_first > s_last)) {
if (info->flash_id == FLASH_UNKNOWN) {
printf("- missing\n");
} else {
printf("- no sectors to erase\n");
}
return 1;
}
switch (info->flash_id & FLASH_TYPEMASK) {
case FLASH_INTEL800B:
case FLASH_INTEL160B:
case FLASH_INTEL320B:
case FLASH_INTEL640B:
case FLASH_28F800C3B:
case FLASH_28F160C3B:
case FLASH_28F320C3B:
case FLASH_28F640C3B:
case FLASH_AM640U:
break;
case FLASH_UNKNOWN:
default:
printf("Can't erase unknown flash type %08lx - aborted\n",
info->flash_id);
return 1;
}
prot = 0;
for (sect = s_first; sect <= s_last; ++sect) {
if (info->protect[sect]) {
prot++;
}
}
if (prot) {
printf("- Warning: %d protected sectors will not be erased!\n",
prot);
} else {
printf("\n");
}
start = get_timer(0);
last = start;
/* Start erase on unprotected sectors */
for (sect = s_first; sect <= s_last && rcode == 0; sect++) {
if (info->protect[sect] != 0) /* protected, skip it */
continue;
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
addr = (FPWV *) (info->start[sect]);
if (intel) {
*addr = (FPW) 0x00500050; /* clear status register */
*addr = (FPW) 0x00200020; /* erase setup */
*addr = (FPW) 0x00D000D0; /* erase confirm */
} else {
/* must be AMD style if not Intel */
FPWV *base; /* first address in bank */
base = (FPWV *) (info->start[0]);
base[0x0555] = (FPW) 0x00AA00AA; /* unlock */
base[0x02AA] = (FPW) 0x00550055; /* unlock */
base[0x0555] = (FPW) 0x00800080; /* erase mode */
base[0x0555] = (FPW) 0x00AA00AA; /* unlock */
base[0x02AA] = (FPW) 0x00550055; /* unlock */
*addr = (FPW) 0x00300030; /* erase sector */
}
/* re-enable interrupts if necessary */
if (flag)
enable_interrupts();
/* wait at least 50us for AMD, 80us for Intel.
* Let's wait 1 ms.
*/
udelay(1000);
while ((*addr & (FPW) 0x00800080) != (FPW) 0x00800080) {
if ((now = get_timer(0)) - start > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf("Timeout\n");
if (intel) {
/* suspend erase */
*addr = (FPW) 0x00B000B0;
}
flash_reset(info); /* reset to read mode */
rcode = 1; /* failed */
break;
}
/* show that we're waiting */
if ((now - last) > 1000) { /* every second */
putc('.');
last = now;
}
}
flash_reset(info); /* reset to read mode */
}
printf(" done\n");
return rcode;
}
/*-----------------------------------------------------------------------
* Copy memory to flash, returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
*/
int
bad_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
{
FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */
int bytes; /* number of bytes to program in current word */
int left; /* number of bytes left to program */
int i, res;
for (left = cnt, res = 0;
left > 0 && res == 0;
addr += sizeof (data), left -= sizeof (data) - bytes) {
bytes = addr & (sizeof (data) - 1);
addr &= ~(sizeof (data) - 1);
/* combine source and destination data so can program
* an entire word of 16 or 32 bits
*/
for (i = 0; i < sizeof (data); i++) {
data <<= 8;
if (i < bytes || i - bytes >= left)
data += *((uchar *) addr + i);
else
data += *src++;
}
/* write one word to the flash */
switch (info->flash_id & FLASH_VENDMASK) {
case FLASH_MAN_AMD:
res = write_word_amd(info, (FPWV *) addr, data);
break;
case FLASH_MAN_INTEL:
res = write_word_intel(info, (FPWV *) addr, data);
break;
default:
/* unknown flash type, error! */
printf("missing or unknown FLASH type\n");
res = 1; /* not really a timeout, but gives error */
break;
}
}
return (res);
}
/**
* write_buf: - Copy memory to flash.
*
* @param info:
* @param src: source of copy transaction
* @param addr: where to copy to
* @param cnt: number of bytes to copy
*
* @return error code
*/
int
write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
{
ulong cp, wp;
FPW data;
int l;
int i, rc;
wp = (addr & ~1); /* get lower word aligned address */
/* handle unaligned start bytes */
if ((l = addr - wp) != 0) {
data = 0;
for (i = 0, cp = wp; i < l; ++i, ++cp) {
data = (data >> 8) | (*(uchar *) cp << 8);
}
for (; i < 2 && cnt > 0; ++i) {
data = (data >> 8) | (*src++ << 8);
--cnt;
++cp;
}
for (; cnt == 0 && i < 2; ++i, ++cp) {
data = (data >> 8) | (*(uchar *) cp << 8);
}
if ((rc = write_word(info, (FPWV *)wp, data)) != 0) {
return (rc);
}
wp += 2;
}
/* handle word aligned part */
while (cnt >= 2) {
/* data = *((vushort*)src); */
data = *((FPW *) src);
if ((rc = write_word(info, (FPWV *)wp, data)) != 0) {
return (rc);
}
src += sizeof (FPW);
wp += sizeof (FPW);
cnt -= sizeof (FPW);
}
if (cnt == 0)
return ERR_OK;
/*
* handle unaligned tail bytes
*/
data = 0;
for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
data = (data >> 8) | (*src++ << 8);
--cnt;
}
for (; i < 2; ++i, ++cp) {
data = (data >> 8) | (*(uchar *) cp << 8);
}
return write_word(info, (FPWV *)wp, data);
}
/*-----------------------------------------------------------------------
* Write a word to Flash for AMD FLASH
* A word is 16 or 32 bits, whichever the bus width of the flash bank
* (not an individual chip) is.
*
* returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
*/
static int
write_word_amd(flash_info_t * info, FPWV * dest, FPW data)
{
ulong start;
int flag;
int res = 0; /* result, assume success */
FPWV *base; /* first address in flash bank */
/* Check if Flash is (sufficiently) erased */
if ((*dest & data) != data) {
return (2);
}
base = (FPWV *) (info->start[0]);
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
base[0x0555] = (FPW) 0x00AA00AA; /* unlock */
base[0x02AA] = (FPW) 0x00550055; /* unlock */
base[0x0555] = (FPW) 0x00A000A0; /* selects program mode */
*dest = data; /* start programming the data */
/* re-enable interrupts if necessary */
if (flag)
enable_interrupts();
start = get_timer(0);
/* data polling for D7 */
while (res == 0
&& (*dest & (FPW) 0x00800080) != (data & (FPW) 0x00800080)) {
if (get_timer(0) - start > CONFIG_SYS_FLASH_WRITE_TOUT) {
*dest = (FPW) 0x00F000F0; /* reset bank */
printf("SHA timeout\n");
res = 1;
}
}
return (res);
}
/*-----------------------------------------------------------------------
* Write a word to Flash for Intel FLASH
* A word is 16 or 32 bits, whichever the bus width of the flash bank
* (not an individual chip) is.
*
* returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
*/
static int
write_word_intel(flash_info_t * info, FPWV * dest, FPW data)
{
ulong start;
int flag;
int res = 0; /* result, assume success */
/* Check if Flash is (sufficiently) erased */
if ((*dest & data) != data) {
return (2);
}
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
*dest = (FPW) 0x00500050; /* clear status register */
*dest = (FPW) 0x00FF00FF; /* make sure in read mode */
*dest = (FPW) 0x00400040; /* program setup */
*dest = data; /* start programming the data */
/* re-enable interrupts if necessary */
if (flag)
enable_interrupts();
start = get_timer(0);
while (res == 0 && (*dest & (FPW) 0x00800080) != (FPW) 0x00800080) {
if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
*dest = (FPW) 0x00B000B0; /* Suspend program */
res = 1;
}
}
if (res == 0 && (*dest & (FPW) 0x00100010))
res = 1; /* write failed, time out error is close enough */
*dest = (FPW) 0x00500050; /* clear status register */
*dest = (FPW) 0x00FF00FF; /* make sure in read mode */
return (res);
}
#ifdef CONFIG_SYS_FLASH_PROTECTION
/*-----------------------------------------------------------------------
*/
int
flash_real_protect(flash_info_t * info, long sector, int prot)
{
int rcode = 0; /* assume success */
FPWV *addr; /* address of sector */
FPW value;
addr = (FPWV *) (info->start[sector]);
switch (info->flash_id & FLASH_TYPEMASK) {
case FLASH_28F800C3B:
case FLASH_28F800C3T:
case FLASH_28F160C3B:
case FLASH_28F160C3T:
case FLASH_28F320C3B:
case FLASH_28F320C3T:
case FLASH_28F640C3B:
case FLASH_28F640C3T:
flash_reset(info); /* make sure in read mode */
*addr = (FPW) 0x00600060L; /* lock command setup */
if (prot)
*addr = (FPW) 0x00010001L; /* lock sector */
else
*addr = (FPW) 0x00D000D0L; /* unlock sector */
flash_reset(info); /* reset to read mode */
/* now see if it really is locked/unlocked as requested */
*addr = (FPW) 0x00900090;
/* read sector protection at sector address, (A7 .. A0) = 0x02.
* D0 = 1 for each device if protected.
* If at least one device is protected the sector is marked
* protected, but return failure. Mixed protected and
* unprotected devices within a sector should never happen.
*/
value = addr[2] & (FPW) 0x00010001;
if (value == 0)
info->protect[sector] = 0;
else if (value == (FPW) 0x00010001)
info->protect[sector] = 1;
else {
/* error, mixed protected and unprotected */
rcode = 1;
info->protect[sector] = 1;
}
if (info->protect[sector] != prot)
rcode = 1; /* failed to protect/unprotect as requested */
/* reload all protection bits from hardware for now */
flash_sync_real_protect(info);
break;
case FLASH_AM640U:
default:
/* no hardware protect that we support */
info->protect[sector] = prot;
break;
}
return rcode;
}
#endif

99
board/mx1fs2/intel.h
Unescape View File

@ -1,99 +0,0 @@
/*
* Copyright (C) 2002 ETC s.r.o.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the ETC s.r.o. nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Written by Marcel Telka <marcel@telka.sk>, 2002.
*
* Documentation:
* [1] Intel Corporation, "3 Volt Intel Strata Flash Memory 28F128J3A, 28F640J3A,
* 28F320J3A (x8/x16)", April 2002, Order Number: 290667-011
* [2] Intel Corporation, "3 Volt Synchronous Intel Strata Flash Memory 28F640K3, 28F640K18,
* 28F128K3, 28F128K18, 28F256K3, 28F256K18 (x16)", June 2002, Order Number: 290737-005
*
* This file is taken from OpenWinCE project hosted by SourceForge.net
*
*/
#ifndef FLASH_INTEL_H
#define FLASH_INTEL_H
#include <common.h>
/* Intel CFI commands - see Table 4. in [1] and Table 3. in [2] */
#define CFI_INTEL_CMD_READ_ARRAY 0xFF /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
#define CFI_INTEL_CMD_READ_IDENTIFIER 0x90 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
#define CFI_INTEL_CMD_READ_QUERY 0x98 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
#define CFI_INTEL_CMD_READ_STATUS_REGISTER 0x70 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
#define CFI_INTEL_CMD_CLEAR_STATUS_REGISTER 0x50 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
#define CFI_INTEL_CMD_PROGRAM1 0x40 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
#define CFI_INTEL_CMD_PROGRAM2 0x10 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
#define CFI_INTEL_CMD_WRITE_TO_BUFFER 0xE8 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
#define CFI_INTEL_CMD_CONFIRM 0xD0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
#define CFI_INTEL_CMD_BLOCK_ERASE 0x20 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
#define CFI_INTEL_CMD_SUSPEND 0xB0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
#define CFI_INTEL_CMD_RESUME 0xD0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
#define CFI_INTEL_CMD_LOCK_SETUP 0x60 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
#define CFI_INTEL_CMD_LOCK_BLOCK 0x01 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
#define CFI_INTEL_CMD_UNLOCK_BLOCK 0xD0 /* 28FxxxJ3A - unlocks all blocks, 28FFxxxK3, 28FxxxK18 */
#define CFI_INTEL_CMD_LOCK_DOWN_BLOCK 0x2F /* 28FxxxK3, 28FxxxK18 */
/* Intel CFI Status Register bits - see Table 6. in [1] and Table 7. in [2] */
#define CFI_INTEL_SR_READY 1 << 7 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
#define CFI_INTEL_SR_ERASE_SUSPEND 1 << 6 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
#define CFI_INTEL_SR_ERASE_ERROR 1 << 5 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
#define CFI_INTEL_SR_PROGRAM_ERROR 1 << 4 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
#define CFI_INTEL_SR_VPEN_ERROR 1 << 3 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
#define CFI_INTEL_SR_PROGRAM_SUSPEND 1 << 2 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
#define CFI_INTEL_SR_BLOCK_LOCKED 1 << 1 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
#define CFI_INTEL_SR_BEFP 1 << 0 /* 28FxxxK3, 28FxxxK18 */
/* Intel flash device ID codes for 28FxxxJ3A - see Table 5. in [1] */
#define CFI_CHIP_INTEL_28F320J3A 0x0016
#define CFI_CHIPN_INTEL_28F320J3A "28F320J3A"
#define CFI_CHIP_INTEL_28F640J3A 0x0017
#define CFI_CHIPN_INTEL_28F640J3A "28F640J3A"
#define CFI_CHIP_INTEL_28F128J3A 0x0018
#define CFI_CHIPN_INTEL_28F128J3A "28F128J3A"
/* Intel flash device ID codes for 28FxxxK3 and 28FxxxK18 - see Table 8. in [2] */
#define CFI_CHIP_INTEL_28F640K3 0x8801
#define CFI_CHIPN_INTEL_28F640K3 "28F640K3"
#define CFI_CHIP_INTEL_28F128K3 0x8802
#define CFI_CHIPN_INTEL_28F128K3 "28F128K3"
#define CFI_CHIP_INTEL_28F256K3 0x8803
#define CFI_CHIPN_INTEL_28F256K3 "28F256K3"
#define CFI_CHIP_INTEL_28F640K18 0x8805
#define CFI_CHIPN_INTEL_28F640K18 "28F640K18"
#define CFI_CHIP_INTEL_28F128K18 0x8806
#define CFI_CHIPN_INTEL_28F128K18 "28F128K18"
#define CFI_CHIP_INTEL_28F256K18 0x8807
#define CFI_CHIPN_INTEL_28F256K18 "28F256K18"
#endif /* FLASH_INTEL_H */

188
board/mx1fs2/lowlevel_init.S
Unescape View File

@ -1,188 +0,0 @@
/*
* Copyright (C) 2004 Sascha Hauer, Pengutronix
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
* 02111-1307, USA.
*
*/
#include <config.h>
#include <version.h>
#include <asm/arch/imx-regs.h>
.globl lowlevel_init
lowlevel_init:
mov r10, lr
/* Change PERCLK1DIV to 14 ie 14+1 */
ldr r0, =PCDR
ldr r1, =CONFIG_SYS_PCDR_VAL
str r1, [r0]
/* set MCU PLL Control Register 0 */
ldr r0, =MPCTL0
ldr r1, =CONFIG_SYS_MPCTL0_VAL
str r1, [r0]
/* set MCU PLL Control Register 1 */
ldr r0, =MPCTL1
ldr r1, =CONFIG_SYS_MPCTL1_VAL
str r1, [r0]
/* set mpll restart bit */
ldr r0, =CSCR
ldr r1, [r0]
orr r1,r1,#(1<<21)
str r1, [r0]
mov r2,#0x10
1:
mov r3,#0x2000
2:
subs r3,r3,#1
bne 2b
subs r2,r2,#1
bne 1b
/* set System PLL Control Register 0 */
ldr r0, =SPCTL0
ldr r1, =CONFIG_SYS_SPCTL0_VAL
str r1, [r0]
/* set System PLL Control Register 1 */
ldr r0, =SPCTL1
ldr r1, =CONFIG_SYS_SPCTL1_VAL
str r1, [r0]
/* set spll restart bit */
ldr r0, =CSCR
ldr r1, [r0]
orr r1,r1,#(1<<22)
str r1, [r0]
mov r2,#0x10
1:
mov r3,#0x2000
2:
subs r3,r3,#1
bne 2b
subs r2,r2,#1
bne 1b
ldr r0, =CSCR
ldr r1, =CONFIG_SYS_CSCR_VAL
str r1, [r0]
ldr r0, =GPCR
ldr r1, =CONFIG_SYS_GPCR_VAL
str r1, [r0]
/*
* I have now read the ARM920 DataSheet back-to-Back, and have stumbled upon
* this.....
*
* It would appear that from a Cold-Boot the ARM920T enters "FastBus" mode CP15
* register 1, this stops it using the output of the PLL and thus runs at the
* slow rate. Unless you place the Core into "Asynch" mode, the CPU will never
* use the value set in the CM_OSC registers...regardless of what you set it
* too! Thus, although i thought i was running at 140MHz, i'm actually running
* at 40!..
*
* Slapping this into my bootloader does the trick...
*
* MRC p15,0,r0,c1,c0,0 ; read core configuration register
* ORR r0,r0,#0xC0000000 ; set asynchronous clocks and not fastbus mode
* MCR p15,0,r0,c1,c0,0 ; write modified value to core configuration
* register
*
*/
MRC p15,0,r0,c1,c0,0
/* ORR r0,r0,#0xC0000000 async mode */
/* ORR r0,r0,#0x40000000 sync mode */
ORR r0,r0,#0xC0000000
MCR p15,0,r0,c1,c0,0
ldr r0, =GIUS(0)
ldr r1, =CONFIG_SYS_GIUS_A_VAL
str r1, [r0]
ldr r0, =FMCR
ldr r1, =CONFIG_SYS_FMCR_VAL
str r1, [r0]
ldr r0, =CS0U
ldr r1, =CONFIG_SYS_CS0U_VAL
str r1, [r0]
ldr r0, =CS0L
ldr r1, =CONFIG_SYS_CS0L_VAL
str r1, [r0]
ldr r0, =CS1U
ldr r1, =CONFIG_SYS_CS1U_VAL
str r1, [r0]
ldr r0, =CS1L
ldr r1, =CONFIG_SYS_CS1L_VAL
str r1, [r0]
ldr r0, =CS4U
ldr r1, =CONFIG_SYS_CS4U_VAL
str r1, [r0]
ldr r0, =CS4L
ldr r1, =CONFIG_SYS_CS4L_VAL
str r1, [r0]
ldr r0, =CS5U
ldr r1, =CONFIG_SYS_CS5U_VAL
str r1, [r0]
ldr r0, =CS5L
ldr r1, =CONFIG_SYS_CS5L_VAL
str r1, [r0]
/* SDRAM Setup */
ldr r1,=0x00221000 /* adr of SDCTRL0 */
ldr r0,=0x92120200
str r0,[r1,#0] /* put in precharge command mode */
ldr r2,=0x08200000 /* adr for precharge cmd */
ldr r0,[r2,#0] /* precharge */
ldr r0,=0xA2120200
ldr r2,=0x08000000 /* start of SDRAM */
str r0,[r1,#0] /* put in auto-refresh mode */
ldr r0,[r2,#0] /* auto-refresh */
ldr r0,[r2,#0] /* auto-refresh */
ldr r0,[r2,#0] /* auto-refresh */
ldr r0,[r2,#0] /* auto-refresh */
ldr r0,[r2,#0] /* auto-refresh */
ldr r0,[r2,#0] /* auto-refresh */
ldr r0,[r2,#0] /* auto-refresh */
ldr r0,=0xB2120200
ldr r2,=0x08111800
str r0,[r1,#0] /* setup for mode register of SDRAM */
ldr r0,[r2,#0] /* program mode register */
ldr r0,=0x82124267
str r0,[r1,#0] /* back to normal operation */
mov pc,r10

122
board/mx1fs2/mx1fs2.c
Unescape View File

@ -1,122 +0,0 @@
/*
* Copyright (C) 2004 Sascha Hauer, Pengutronix
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
#include <common.h>
#include <asm/arch/imx-regs.h>
DECLARE_GLOBAL_DATA_PTR;
#define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
extern void imx_gpio_mode(int gpio_mode);
static void logo_init(void)
{
imx_gpio_mode(PD15_PF_LD0);
imx_gpio_mode(PD16_PF_LD1);
imx_gpio_mode(PD17_PF_LD2);
imx_gpio_mode(PD18_PF_LD3);
imx_gpio_mode(PD19_PF_LD4);
imx_gpio_mode(PD20_PF_LD5);
imx_gpio_mode(PD21_PF_LD6);
imx_gpio_mode(PD22_PF_LD7);
imx_gpio_mode(PD23_PF_LD8);
imx_gpio_mode(PD24_PF_LD9);
imx_gpio_mode(PD25_PF_LD10);
imx_gpio_mode(PD26_PF_LD11);
imx_gpio_mode(PD27_PF_LD12);
imx_gpio_mode(PD28_PF_LD13);
imx_gpio_mode(PD29_PF_LD14);
imx_gpio_mode(PD30_PF_LD15);
imx_gpio_mode(PD14_PF_FLM_VSYNC);
imx_gpio_mode(PD13_PF_LP_HSYNC);
imx_gpio_mode(PD6_PF_LSCLK);
imx_gpio_mode(GPIO_PORTD | GPIO_OUT | GPIO_DR);
imx_gpio_mode(PD11_PF_CONTRAST);
imx_gpio_mode(PD10_PF_SPL_SPR);
LCDC_RMCR = 0x00000000;
LCDC_PCR = PCR_COLOR | PCR_PBSIZ_8 | PCR_BPIX_16 | PCR_PCD(5);
LCDC_HCR = HCR_H_WIDTH(2);
LCDC_VCR = VCR_V_WIDTH(2);
LCDC_PWMR = 0x00000380; /* contrast to 0x80 middle (is best !!!) */
LCDC_SSA = 0x10040000; /* image in flash */
LCDC_SIZE = SIZE_XMAX(320) | SIZE_YMAX(240); /* screen size */
LCDC_VPW = 0x000000A0; /* Virtual Page Width Register */
LCDC_POS = 0x00000000; /* panning offset 0 (0 pixel offset) */
/* disable Cursor */
LCDC_CPOS = 0x00000000;
/* fixed burst length */
LCDC_DMACR = DMACR_BURST | DMACR_HM(8) | DMACR_TM(2);
/* enable LCD */
DR(3) |= 0x00001000;
LCDC_RMCR = RMCR_LCDC_EN;
}
int
board_init(void)
{
gd->bd->bi_arch_number = MACH_TYPE_MX1FS2;
gd->bd->bi_boot_params = 0x08000100;
serial_init();
logo_init();
return 0;
}
int
dram_init(void)
{
#if ( CONFIG_NR_DRAM_BANKS > 0 )
gd->bd->bi_dram[0].start = MX1FS2_SDRAM_1;
gd->bd->bi_dram[0].size = MX1FS2_SDRAM_1_SIZE;
#endif
return 0;
}
/**
* show_boot_progress: - indicate state of the boot process
*
* @param status: Status number - see README for details.
*
*/
void
show_boot_progress(int status)
{
/* We use this as a hook to disable serial ports just before booting
* This way we suppress the "uncompressing linux..." message
*/
#ifdef CONFIG_SILENT_CONSOLE
if( status == 8) {
if( getenv("silent") != NULL ) {
*(volatile unsigned long *)0x206080 &= ~1;
*(volatile unsigned long *)0x207080 &= ~1;
}
}
#endif
return;
}

1
boards.cfg
Unescape View File

@ -63,7 +63,6 @@ kb9202 arm arm920t - -
m501sk arm arm920t - - at91rm9200
at91rm9200dk arm arm920t - atmel at91rm9200
mx1ads arm arm920t - - imx
mx1fs2 arm arm920t - - imx
scb9328 arm arm920t - - imx
cm4008 arm arm920t - - ks8695
cm41xx arm arm920t - - ks8695

1
doc/README.scrapyard
Unescape View File

@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
mx1fs2 arm arm920t - 2011-07-17
lpd7a404 arm lh7a40x - 2011-07-17
edb9301 arm arm920t - 2011-07-17
edb9302 arm arm920t - 2011-07-17

305
include/configs/mx1fs2.h
Unescape View File

@ -1,305 +0,0 @@
/*
* Copyright (C) 2004 Sascha Hauer, Pengutronix
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#define CONFIG_ARM920T 1 /* this is an ARM920T CPU */
#define CONFIG_IMX 1 /* in a Motorola MC9328MXL Chip */
#define CONFIG_MX1FS2 1 /* on a mx1fs2 board */
#undef CONFIG_USE_IRQ /* don't need use IRQ/FIQ */
/*
* Select serial console configuration
*/
#undef _CONFIG_UART1 /* internal uart 1 */
#define _CONFIG_UART2 /* internal uart 2 */
#undef _CONFIG_UART3 /* internal uart 3 */
#undef _CONFIG_UART4 /* internal uart 4 */
#undef CONFIG_SILENT_CONSOLE /* use this to disable output */
/*
* BOOTP options
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_JFFS2
#undef CONFIG_CMD_CONSOLE
#undef CONFIG_CMD_DHCP
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_NET
#undef CONFIG_CMD_PING
#undef CONFIG_CMD_SOURCE
/*
* Boot options. Setting delay to -1 stops autostart count down.
*/
#define CONFIG_BOOTDELAY 10
#define CONFIG_BOOTARGS "root=/dev/mtdblock4 console=ttySMX0,115200n8 rootfstype=jffs2"
#define CONFIG_BOOTCOMMAND "bootm 10080000"
#define CONFIG_SHOW_BOOT_PROGRESS
/*
* General options for u-boot. Modify to save memory foot print
*/
#define CONFIG_SYS_LONGHELP /* undef saves memory */
#define CONFIG_SYS_PROMPT "mx1fs2> " /* prompt string */
#define CONFIG_SYS_CBSIZE 256 /* console I/O buffer */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* print buffer size */
#define CONFIG_SYS_MAXARGS 16 /* max command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* boot args buf size */
#define CONFIG_SYS_MEMTEST_START 0x08100000 /* memtest test area */
#define CONFIG_SYS_MEMTEST_END 0x08F00000
#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
#define CONFIG_SYS_CPUSPEED 0x141 /* core clock - register value */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_BAUDRATE 115200
/*
* Definitions related to passing arguments to kernel.
*/
#define CONFIG_CMDLINE_TAG 1 /* send commandline to Kernel */
#define CONFIG_SETUP_MEMORY_TAGS 1 /* send memory definition to kernel */
#define CONFIG_INITRD_TAG 1 /* send initrd params */
/*
* Malloc pool need to host env + 128 Kb reserve for other allocations.
*/
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128<<10) )
#define CONFIG_STACKSIZE (120<<10) /* stack size */
#ifdef CONFIG_USE_IRQ
#define CONFIG_STACKSIZE_IRQ (4<<10) /* IRQ stack */
#define CONFIG_STACKSIZE_FIQ (4<<10) /* FIQ stack */
#endif
/* SDRAM Setup Values
* 0x910a8300 Precharge Command CAS 3
* 0x910a8200 Precharge Command CAS 2
*
* 0xa10a8300 AutoRefresh Command CAS 3
* 0xa10a8200 Set AutoRefresh Command CAS 2
*/
#define PRECHARGE_CMD 0x910a8300
#define AUTOREFRESH_CMD 0xa10a8300
#define BUS32BIT_VERSION
/*
* SDRAM Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */
#define MX1FS2_SDRAM_1 0x08000000 /* SDRAM bank #1 */
#ifdef BUS32BIT_VERSION
#define MX1FS2_SDRAM_1_SIZE (0x04000000 - 0x100000) /* 64 MB - 1M Framebuffer */
#else
#define MX1FS2_SDRAM_1_SIZE (0x01FC0000 - 0x100000) /* 32 MB - 1M Framebuffer */
#endif
/*
* Flash Controller settings
*/
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/
#define CONFIG_SYS_MAX_FLASH_SECT 256 /* number of sector in FLASH bank */
#ifdef BUS32BIT_VERSION
#define MX1FS2_FLASH_BUS_WIDTH 4 /* we use 32 bit FLASH memory... */
#define MX1FS2_FLASH_INTERLEAVE 2 /* ... made of 2 chips */
#define MX1FS2_FLASH_BANK_SIZE 0x02000000 /* size of one flash bank*/
#define MX1FS2_FLASH_SECT_SIZE 0x00020000 /* size of erase sector */
#else
#define MX1FS2_FLASH_BUS_WIDTH 2 /* we use 16 bit FLASH memory... */
#define MX1FS2_FLASH_INTERLEAVE 1 /* ... made of 1 chip */
#define MX1FS2_FLASH_BANK_SIZE 0x01000000 /* size of one flash bank*/
#define MX1FS2_FLASH_SECT_SIZE 0x00010000 /* size of erase sector */
#endif
#define MX1FS2_FLASH_BASE 0x10000000 /* location of flash memory */
#define MX1FS2_FLASH_UNLOCK 1 /* perform hw unlock first */
/* This should be defined if CFI FLASH device is present. Actually benefit
is not so clear to me. In other words we can provide more informations
to user, but this expects more complex flash handling we do not provide
now.*/
#undef CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* timeout for Erase operation */
#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* timeout for Write operation */
#define CONFIG_SYS_FLASH_BASE MX1FS2_FLASH_BASE
/*
* This is setting for JFFS2 support in u-boot.
* Right now there is no gain for user, but later on booting kernel might be
* possible. Consider using XIP kernel running from flash to save RAM
* footprint.
* NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
*/
/*
* JFFS2 partitions
*/
/* No command line, one static partition, whole device */
/*
#undef CONFIG_CMD_MTDPARTS
#define CONFIG_JFFS2_DEV "nor0"
#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
#define CONFIG_JFFS2_PART_OFFSET 0x00050000
*/
/* mtdparts command line support */
/* Note: fake mtd_id used, no linux mtd map file */
#define CONFIG_CMD_MTDPARTS
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
#define CONFIG_FLASH_CFI_MTD
#define MTDIDS_DEFAULT "nor0=mx1fs2-0"
#ifdef BUS32BIT_VERSION
#define MTDPARTS_DEFAULT "mtdparts=mx1fs2-0:2m@5m(part0),5m@9m(part1)"
#else
#define MTDPARTS_DEFAULT "mtdparts=mx1fs2-0:-@320k(jffs2)"
#endif
/*
* Environment setup. Definitions of monitor location and size with
* definition of environment setup ends up in 2 possibilities.
* 1. Embeded environment - in u-boot code is space for environment
* 2. Environment is read from predefined sector of flash
* Right now we support 2. possiblity, but expecting no env placed
* on mentioned address right now. This also needs to provide whole
* sector for it - for us 256Kb is really waste of memory. U-boot uses
* default env. and until kernel parameters could be sent to kernel
* env. has no sense to us.
*/
#define CONFIG_SYS_MONITOR_BASE 0x10000000
#define CONFIG_SYS_MONITOR_LEN 0x20000 /* 128b ( 1 flash sector ) */
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_ADDR 0x10020000 /* absolute address for now */
#define CONFIG_ENV_SIZE 0x20000
#define CONFIG_ENV_OVERWRITE 1 /* env is not writable now */
/* Setup CS4 and CS5 */
#define CONFIG_SYS_GIUS_A_VAL 0x0003fffe
/*
* CSxU_VAL:
* 63| x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x|32
* |DTACK_SEL|0|BCD | BCS | PSZ|PME|SYNC| DOL | CNC| WSC | 0| WWS | EDC |
*
* CSxL_VAL:
* 31| x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x| 0
* | OEA | OEN | WEA | WEN | CSA |EBC| DSZ | 0|SP|0|WP| 0 0|PA|CSEN|
*/
#define CONFIG_SYS_CS0U_VAL 0x00008C00
#define CONFIG_SYS_CS0L_VAL 0x22222601
#define CONFIG_SYS_CS1U_VAL 0x00008C00
#define CONFIG_SYS_CS1L_VAL 0x22222301
#define CONFIG_SYS_CS4U_VAL 0x00008C00
#define CONFIG_SYS_CS4L_VAL 0x22222301
#define CONFIG_SYS_CS5U_VAL 0x00008C00
#define CONFIG_SYS_CS5L_VAL 0x22222301
/* f_{dpll}=2*f{ref}*(MFI+MFN/(MFD+1))/(PD+1)
f_ref=16,777MHz
0x002a141f: 191,9944MHz
0x040b2007: 144MHz
0x042a141f: 96MHz
0x0811140d: 64MHz
0x040e200e: 150MHz
0x00321431: 200MHz
0x08001800: 64MHz mit 16er Quarz
0x04001800: 96MHz mit 16er Quarz
0x04002400: 144MHz mit 16er Quarz
31 |x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x| 0
|XXX|--PD---|-------MFD---------|XXX|--MFI--|-----MFN-----------| */
#define CONFIG_SYS_MPCTL0_VAL 0x07E723AD
#define CONFIG_SYS_MPCTL1_VAL 0x00000040
#define CONFIG_SYS_PCDR_VAL 0x00010005
#define CONFIG_SYS_GPCR_VAL 0x00000FFB
#define USE_16M_OSZI /* If you have one, you want to use it
The internal 32kHz oszillator jitters */
#ifdef USE_16M_OSZI
#define CONFIG_SYS_SPCTL0_VAL 0x04001401
#define CONFIG_SYS_SPCTL1_VAL 0x0C000040
#define CONFIG_SYS_CSCR_VAL 0x07030003
#define CONFIG_SYS_CLK_FREQ 16780000
#define CONFIG_SYSPLL_CLK_FREQ 16000000
#else
#define CONFIG_SYS_SPCTL0_VAL 0x07E716D1
#define CONFIG_SYS_CSCR_VAL 0x06000003
#define CONFIG_SYS_CLK_FREQ 16780000
#define CONFIG_SYSPLL_CLK_FREQ 16780000
#endif
/*
* Well this has to be defined, but on the other hand it is used differently
* one may expect. For instance loadb command do not cares :-)
* So advice is - do not relay on this...
*/
#define CONFIG_SYS_LOAD_ADDR 0x08400000
#define CONFIG_SYS_FMCR_VAL 0x00000003 /* Reset Default */
/* Bit[0:3] contain PERCLK1DIV for UART 1
0x000b00b ->b<- -> 192MHz/12=16MHz
0x000b00b ->8<- -> 144MHz/09=16MHz
0x000b00b ->3<- -> 64MHz/4=16MHz */
#ifdef _CONFIG_UART1
#define CONFIG_IMX_SERIAL
#define CONFIG_IMX_SERIAL1
#elif defined _CONFIG_UART2
#define CONFIG_IMX_SERIAL
#define CONFIG_IMX_SERIAL2
#elif defined _CONFIG_UART3 | defined _CONFIG_UART4
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_CLK 3686400
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_CONS_INDEX 1
#ifdef _CONFIG_UART3
#define CONFIG_SYS_NS16550_COM1 0x15000000
#elif defined _CONFIG_UART4
#define CONFIG_SYS_NS16550_COM1 0x16000000
#endif
#endif
#endif /* __CONFIG_H */
Write Preview
Loading…
Cancel
Save