DWMMC: SMDK5420: Disable SMU for eMMC

SMDK5420 has a new Security Management Unit added
for dwmmc driver, hence, configuring the control
registers to support booting via eMMC.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
master
Rajeshwari Shinde 11 years ago committed by Pantelis Antoniou
parent 56b34bc617
commit 6f0b7caa67
  1. 13
      arch/arm/include/asm/arch-exynos/dwmmc.h
  2. 11
      drivers/mmc/dw_mmc.c
  3. 3
      drivers/mmc/exynos_dw_mmc.c
  4. 3
      include/dwmmc.h

@ -14,6 +14,19 @@
#define DWMCI_SET_DRV_CLK(x) ((x) << 16)
#define DWMCI_SET_DIV_RATIO(x) ((x) << 24)
#define EMMCP_MPSBEGIN0 0x1200
#define EMMCP_SEND0 0x1204
#define EMMCP_CTRL0 0x120C
#define MPSCTRL_SECURE_READ_BIT (0x1<<7)
#define MPSCTRL_SECURE_WRITE_BIT (0x1<<6)
#define MPSCTRL_NON_SECURE_READ_BIT (0x1<<5)
#define MPSCTRL_NON_SECURE_WRITE_BIT (0x1<<4)
#define MPSCTRL_USE_FUSE_KEY (0x1<<3)
#define MPSCTRL_ECB_MODE (0x1<<2)
#define MPSCTRL_ENCRYPTION (0x1<<1)
#define MPSCTRL_VALID (0x1<<0)
#ifdef CONFIG_OF_CONTROL
int exynos_dwmmc_init(const void *blob);
#endif

@ -11,6 +11,7 @@
#include <mmc.h>
#include <dwmmc.h>
#include <asm-generic/errno.h>
#include <asm/arch/dwmmc.h>
#define PAGE_SIZE 4096
@ -301,6 +302,16 @@ static int dwmci_init(struct mmc *mmc)
struct dwmci_host *host = (struct dwmci_host *)mmc->priv;
u32 fifo_size;
if (host->quirks & DWMCI_QUIRK_DISABLE_SMU) {
dwmci_writel(host, EMMCP_MPSBEGIN0, 0);
dwmci_writel(host, EMMCP_SEND0, 0);
dwmci_writel(host, EMMCP_CTRL0,
MPSCTRL_SECURE_READ_BIT |
MPSCTRL_SECURE_WRITE_BIT |
MPSCTRL_NON_SECURE_READ_BIT |
MPSCTRL_NON_SECURE_WRITE_BIT | MPSCTRL_VALID);
}
dwmci_writel(host, DWMCI_PWREN, 1);
if (!dwmci_wait_reset(host, DWMCI_RESET_ALL)) {

@ -62,6 +62,9 @@ int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel)
host->name = "EXYNOS DWMMC";
host->ioaddr = (void *)regbase;
host->buswidth = bus_width;
#ifdef CONFIG_EXYNOS5420
host->quirks = DWMCI_QUIRK_DISABLE_SMU;
#endif
if (clksel) {
host->clksel_val = clksel;

@ -123,6 +123,9 @@
#define DWMCI_BMOD_IDMAC_FB (1 << 1)
#define DWMCI_BMOD_IDMAC_EN (1 << 7)
/* quirks */
#define DWMCI_QUIRK_DISABLE_SMU (1 << 0)
struct dwmci_host {
char *name;
void *ioaddr;

Loading…
Cancel
Save