Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: John Rigby <john.rigby@linaro.org> Acked-by: Tom Rini <trini@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Conflicts: drivers/gpio/Makefilemaster
Mathieu J. Poirier
13 years ago
committed by
Albert ARIBAUD
parent
77bfa6b436
commit
84dee301c3
@ -0,0 +1,42 @@ |
||||
/*
|
||||
* Structures and registers for GPIO access in the Nomadik SoC |
||||
* |
||||
* Code ported from Nomadik GPIO driver in ST-Ericsson Linux kernel code. |
||||
* The purpose is that GPIO config found in kernel should work by simply |
||||
* copy-paste it to U-boot. |
||||
* |
||||
* Ported to U-boot by: |
||||
* Copyright (C) 2010 Joakim Axelsson <joakim.axelsson AT stericsson.com> |
||||
* Copyright (C) 2008 STMicroelectronics |
||||
* Author: Prafulla WADASKAR <prafulla.wadaskar@st.com> |
||||
* Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 as |
||||
* published by the Free Software Foundation. |
||||
*/ |
||||
|
||||
#ifndef __DB8500_GPIO_H__ |
||||
#define __DB8500_GPIO_H__ |
||||
|
||||
/* Alternate functions: function C is set in hw by setting both A and B */ |
||||
enum db8500_gpio_alt { |
||||
DB8500_GPIO_ALT_GPIO = 0, |
||||
DB8500_GPIO_ALT_A = 1, |
||||
DB8500_GPIO_ALT_B = 2, |
||||
DB8500_GPIO_ALT_C = (DB8500_GPIO_ALT_A | DB8500_GPIO_ALT_B) |
||||
}; |
||||
|
||||
enum db8500_gpio_pull { |
||||
DB8500_GPIO_PULL_NONE, |
||||
DB8500_GPIO_PULL_UP, |
||||
DB8500_GPIO_PULL_DOWN |
||||
}; |
||||
|
||||
void db8500_gpio_set_pull(unsigned gpio, enum db8500_gpio_pull pull); |
||||
void db8500_gpio_make_input(unsigned gpio); |
||||
int db8500_gpio_get_input(unsigned gpio); |
||||
void db8500_gpio_make_output(unsigned gpio, int val); |
||||
void db8500_gpio_set_output(unsigned gpio, int val); |
||||
|
||||
#endif /* __DB8500_GPIO_H__ */ |
||||
@ -0,0 +1,170 @@ |
||||
/*
|
||||
* Copyright (C) ST-Ericsson SA 2010 |
||||
* |
||||
* Code ported from Nomadik GPIO driver in ST-Ericsson Linux kernel code. |
||||
* The purpose is that GPIO config found in kernel should work by simply |
||||
* copy-paste it to U-boot. Ported 2010 to U-boot by: |
||||
* Author: Joakim Axelsson <joakim.axelsson AT stericsson.com> |
||||
* |
||||
* License terms: GNU General Public License, version 2 |
||||
* Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson |
||||
* |
||||
* |
||||
* Based on arch/arm/mach-pxa/include/mach/mfp.h: |
||||
* Copyright (C) 2007 Marvell International Ltd. |
||||
* eric miao <eric.miao@marvell.com> |
||||
*/ |
||||
|
||||
#ifndef __DB8500_PINCFG_H |
||||
#define __DB8500_PINCFG_H |
||||
|
||||
#include "db8500_gpio.h" |
||||
|
||||
/*
|
||||
* U-boot info: |
||||
* SLPM (sleep mode) config will be ignored by U-boot but it is still |
||||
* possible to configure it in order to keep cut-n-paste compability |
||||
* with Linux kernel config. |
||||
* |
||||
* pin configurations are represented by 32-bit integers: |
||||
* |
||||
* bit 0.. 8 - Pin Number (512 Pins Maximum) |
||||
* bit 9..10 - Alternate Function Selection |
||||
* bit 11..12 - Pull up/down state |
||||
* bit 13 - Sleep mode behaviour (not used in U-boot) |
||||
* bit 14 - Direction |
||||
* bit 15 - Value (if output) |
||||
* bit 16..18 - SLPM pull up/down state (not used in U-boot) |
||||
* bit 19..20 - SLPM direction (not used in U-boot) |
||||
* bit 21..22 - SLPM Value (if output) (not used in U-boot) |
||||
* |
||||
* to facilitate the definition, the following macros are provided |
||||
* |
||||
* PIN_CFG_DEFAULT - default config (0): |
||||
* pull up/down = disabled |
||||
* sleep mode = input/wakeup |
||||
* direction = input |
||||
* value = low |
||||
* SLPM direction = same as normal |
||||
* SLPM pull = same as normal |
||||
* SLPM value = same as normal |
||||
* |
||||
* PIN_CFG - default config with alternate function |
||||
* PIN_CFG_PULL - default config with alternate function and pull up/down |
||||
*/ |
||||
|
||||
/* Sleep mode */ |
||||
enum db8500_gpio_slpm { |
||||
DB8500_GPIO_SLPM_INPUT, |
||||
DB8500_GPIO_SLPM_WAKEUP_ENABLE = DB8500_GPIO_SLPM_INPUT, |
||||
DB8500_GPIO_SLPM_NOCHANGE, |
||||
DB8500_GPIO_SLPM_WAKEUP_DISABLE = DB8500_GPIO_SLPM_NOCHANGE, |
||||
}; |
||||
|
||||
#define PIN_NUM_MASK 0x1ff |
||||
#define PIN_NUM(x) ((x) & PIN_NUM_MASK) |
||||
|
||||
#define PIN_ALT_SHIFT 9 |
||||
#define PIN_ALT_MASK (0x3 << PIN_ALT_SHIFT) |
||||
#define PIN_ALT(x) (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT) |
||||
#define PIN_GPIO (DB8500_GPIO_ALT_GPIO << PIN_ALT_SHIFT) |
||||
#define PIN_ALT_A (DB8500_GPIO_ALT_A << PIN_ALT_SHIFT) |
||||
#define PIN_ALT_B (DB8500_GPIO_ALT_B << PIN_ALT_SHIFT) |
||||
#define PIN_ALT_C (DB8500_GPIO_ALT_C << PIN_ALT_SHIFT) |
||||
|
||||
#define PIN_PULL_SHIFT 11 |
||||
#define PIN_PULL_MASK (0x3 << PIN_PULL_SHIFT) |
||||
#define PIN_PULL(x) (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT) |
||||
#define PIN_PULL_NONE (DB8500_GPIO_PULL_NONE << PIN_PULL_SHIFT) |
||||
#define PIN_PULL_UP (DB8500_GPIO_PULL_UP << PIN_PULL_SHIFT) |
||||
#define PIN_PULL_DOWN (DB8500_GPIO_PULL_DOWN << PIN_PULL_SHIFT) |
||||
|
||||
#define PIN_SLPM_SHIFT 13 |
||||
#define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT) |
||||
#define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT) |
||||
#define PIN_SLPM_MAKE_INPUT (DB8500_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT) |
||||
#define PIN_SLPM_NOCHANGE (DB8500_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT) |
||||
/* These two replace the above in DB8500v2+ */ |
||||
#define PIN_SLPM_WAKEUP_ENABLE \ |
||||
(DB8500_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT) |
||||
#define PIN_SLPM_WAKEUP_DISABLE \ |
||||
(DB8500_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT) |
||||
|
||||
#define PIN_DIR_SHIFT 14 |
||||
#define PIN_DIR_MASK (0x1 << PIN_DIR_SHIFT) |
||||
#define PIN_DIR(x) (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT) |
||||
#define PIN_DIR_INPUT (0 << PIN_DIR_SHIFT) |
||||
#define PIN_DIR_OUTPUT (1 << PIN_DIR_SHIFT) |
||||
|
||||
#define PIN_VAL_SHIFT 15 |
||||
#define PIN_VAL_MASK (0x1 << PIN_VAL_SHIFT) |
||||
#define PIN_VAL(x) (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT) |
||||
#define PIN_VAL_LOW (0 << PIN_VAL_SHIFT) |
||||
#define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT) |
||||
|
||||
#define PIN_SLPM_PULL_SHIFT 16 |
||||
#define PIN_SLPM_PULL_MASK (0x7 << PIN_SLPM_PULL_SHIFT) |
||||
#define PIN_SLPM_PULL(x) \ |
||||
(((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT) |
||||
#define PIN_SLPM_PULL_NONE \ |
||||
((1 + DB8500_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT) |
||||
#define PIN_SLPM_PULL_UP \ |
||||
((1 + DB8500_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT) |
||||
#define PIN_SLPM_PULL_DOWN \ |
||||
((1 + DB8500_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT) |
||||
|
||||
#define PIN_SLPM_DIR_SHIFT 19 |
||||
#define PIN_SLPM_DIR_MASK (0x3 << PIN_SLPM_DIR_SHIFT) |
||||
#define PIN_SLPM_DIR(x) \ |
||||
(((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT) |
||||
#define PIN_SLPM_DIR_INPUT ((1 + 0) << PIN_SLPM_DIR_SHIFT) |
||||
#define PIN_SLPM_DIR_OUTPUT ((1 + 1) << PIN_SLPM_DIR_SHIFT) |
||||
|
||||
#define PIN_SLPM_VAL_SHIFT 21 |
||||
#define PIN_SLPM_VAL_MASK (0x3 << PIN_SLPM_VAL_SHIFT) |
||||
#define PIN_SLPM_VAL(x) \ |
||||
(((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT) |
||||
#define PIN_SLPM_VAL_LOW ((1 + 0) << PIN_SLPM_VAL_SHIFT) |
||||
#define PIN_SLPM_VAL_HIGH ((1 + 1) << PIN_SLPM_VAL_SHIFT) |
||||
|
||||
/* Shortcuts. Use these instead of separate DIR, PULL, and VAL. */ |
||||
#define PIN_INPUT_PULLDOWN (PIN_DIR_INPUT | PIN_PULL_DOWN) |
||||
#define PIN_INPUT_PULLUP (PIN_DIR_INPUT | PIN_PULL_UP) |
||||
#define PIN_INPUT_NOPULL (PIN_DIR_INPUT | PIN_PULL_NONE) |
||||
#define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW) |
||||
#define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH) |
||||
|
||||
#define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN) |
||||
#define PIN_SLPM_INPUT_PULLUP (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP) |
||||
#define PIN_SLPM_INPUT_NOPULL (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE) |
||||
#define PIN_SLPM_OUTPUT_LOW (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW) |
||||
#define PIN_SLPM_OUTPUT_HIGH (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH) |
||||
|
||||
#define PIN_CFG_DEFAULT (0) |
||||
|
||||
#define PIN_CFG(num, alt) \ |
||||
(PIN_CFG_DEFAULT |\
|
||||
(PIN_NUM(num) | PIN_##alt)) |
||||
|
||||
#define PIN_CFG_INPUT(num, alt, pull) \ |
||||
(PIN_CFG_DEFAULT |\
|
||||
(PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull)) |
||||
|
||||
#define PIN_CFG_OUTPUT(num, alt, val) \ |
||||
(PIN_CFG_DEFAULT |\
|
||||
(PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val)) |
||||
|
||||
#define PIN_CFG_PULL(num, alt, pull) \ |
||||
((PIN_CFG_DEFAULT & ~PIN_PULL_MASK) |\
|
||||
(PIN_NUM(num) | PIN_##alt | PIN_PULL_##pull)) |
||||
|
||||
/**
|
||||
* db8500_gpio_config_pins - configure several pins at once |
||||
* @cfgs: array of pin configurations |
||||
* @num: number of elments in the array |
||||
* |
||||
* Configures several GPIO pins. |
||||
*/ |
||||
void db8500_gpio_config_pins(unsigned long *cfgs, size_t num); |
||||
|
||||
#endif |
||||
@ -0,0 +1,49 @@ |
||||
#
|
||||
# Copyright (C) ST-Ericsson SA 2009
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
# MA 02111-1307 USA
|
||||
#
|
||||
|
||||
include $(TOPDIR)/config.mk |
||||
|
||||
CFLAGS += -D__RELEASE -D__STN_8500
|
||||
LIB = $(obj)lib$(BOARD).o
|
||||
|
||||
COBJS := snowball.o
|
||||
|
||||
SRCS := $(COBJS:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(COBJS))
|
||||
|
||||
$(LIB): $(obj).depend $(OBJS) |
||||
$(call cmd_link_o_target, $(OBJS))
|
||||
|
||||
clean: |
||||
rm -f $(OBJS)
|
||||
|
||||
distclean: clean |
||||
rm -f $(LIB) core *.bak $(obj).depend
|
||||
|
||||
#########################################################################
|
||||
|
||||
# defines $(obj).depend target
|
||||
include $(SRCTREE)/rules.mk |
||||
|
||||
sinclude $(obj).depend |
||||
|
||||
#########################################################################
|
||||
@ -0,0 +1,745 @@ |
||||
/*
|
||||
* Copyright (C) ST-Ericsson SA 2010 |
||||
* Code ported from Nomadik GPIO driver in ST-Ericsson Linux kernel code. |
||||
* The purpose is that GPIO config found in kernel should work by simply |
||||
* copy-paste it to U-boot. |
||||
* |
||||
* Ported to U-boot by: |
||||
* Copyright (C) 2010 Joakim Axelsson <joakim.axelsson AT stericsson.com> |
||||
** |
||||
* License terms: GNU General Public License, version 2 |
||||
* Author: Rabin Vincent <rabin.vincent@stericsson.com> |
||||
*/ |
||||
|
||||
#ifndef __DB8500_PINS_H |
||||
#define __DB8500_PINS_H |
||||
|
||||
#include <asm/arch/db8500_pincfg.h> |
||||
|
||||
#define GPIO0_GPIO PIN_CFG(0, GPIO) |
||||
#define GPIO0_U0_CTSn PIN_CFG(0, ALT_A) |
||||
#define GPIO0_TRIG_OUT PIN_CFG(0, ALT_B) |
||||
#define GPIO0_IP_TDO PIN_CFG(0, ALT_C) |
||||
|
||||
#define GPIO1_GPIO PIN_CFG(1, GPIO) |
||||
#define GPIO1_U0_RTSn PIN_CFG(1, ALT_A) |
||||
#define GPIO1_TRIG_IN PIN_CFG(1, ALT_B) |
||||
#define GPIO1_IP_TDI PIN_CFG(1, ALT_C) |
||||
|
||||
#define GPIO2_GPIO PIN_CFG(2, GPIO) |
||||
#define GPIO2_U0_RXD PIN_CFG(2, ALT_A) |
||||
#define GPIO2_NONE PIN_CFG(2, ALT_B) |
||||
#define GPIO2_IP_TMS PIN_CFG(2, ALT_C) |
||||
|
||||
#define GPIO3_GPIO PIN_CFG(3, GPIO) |
||||
#define GPIO3_U0_TXD PIN_CFG(3, ALT_A) |
||||
#define GPIO3_NONE PIN_CFG(3, ALT_B) |
||||
#define GPIO3_IP_TCK PIN_CFG(3, ALT_C) |
||||
|
||||
#define GPIO4_GPIO PIN_CFG(4, GPIO) |
||||
#define GPIO4_U1_RXD PIN_CFG(4, ALT_A) |
||||
#define GPIO4_I2C4_SCL PIN_CFG_PULL(4, ALT_B, UP) |
||||
#define GPIO4_IP_TRSTn PIN_CFG(4, ALT_C) |
||||
|
||||
#define GPIO5_GPIO PIN_CFG(5, GPIO) |
||||
#define GPIO5_U1_TXD PIN_CFG(5, ALT_A) |
||||
#define GPIO5_I2C4_SDA PIN_CFG_PULL(5, ALT_B, UP) |
||||
#define GPIO5_IP_GPIO6 PIN_CFG(5, ALT_C) |
||||
|
||||
#define GPIO6_GPIO PIN_CFG(6, GPIO) |
||||
#define GPIO6_U1_CTSn PIN_CFG(6, ALT_A) |
||||
#define GPIO6_I2C1_SCL PIN_CFG_PULL(6, ALT_B, UP) |
||||
#define GPIO6_IP_GPIO0 PIN_CFG(6, ALT_C) |
||||
|
||||
#define GPIO7_GPIO PIN_CFG(7, GPIO) |
||||
#define GPIO7_U1_RTSn PIN_CFG(7, ALT_A) |
||||
#define GPIO7_I2C1_SDA PIN_CFG_PULL(7, ALT_B, UP) |
||||
#define GPIO7_IP_GPIO1 PIN_CFG(7, ALT_C) |
||||
|
||||
#define GPIO8_GPIO PIN_CFG(8, GPIO) |
||||
#define GPIO8_IPI2C_SDA PIN_CFG_PULL(8, ALT_A, UP) |
||||
#define GPIO8_I2C2_SDA PIN_CFG_PULL(8, ALT_B, UP) |
||||
|
||||
#define GPIO9_GPIO PIN_CFG(9, GPIO) |
||||
#define GPIO9_IPI2C_SCL PIN_CFG_PULL(9, ALT_A, UP) |
||||
#define GPIO9_I2C2_SCL PIN_CFG_PULL(9, ALT_B, UP) |
||||
|
||||
#define GPIO10_GPIO PIN_CFG(10, GPIO) |
||||
#define GPIO10_IPI2C_SDA PIN_CFG_PULL(10, ALT_A, UP) |
||||
#define GPIO10_I2C2_SDA PIN_CFG_PULL(10, ALT_B, UP) |
||||
#define GPIO10_IP_GPIO3 PIN_CFG(10, ALT_C) |
||||
|
||||
#define GPIO11_GPIO PIN_CFG(11, GPIO) |
||||
#define GPIO11_IPI2C_SCL PIN_CFG_PULL(11, ALT_A, UP) |
||||
#define GPIO11_I2C2_SCL PIN_CFG_PULL(11, ALT_B, UP) |
||||
#define GPIO11_IP_GPIO2 PIN_CFG(11, ALT_C) |
||||
|
||||
#define GPIO12_GPIO PIN_CFG(12, GPIO) |
||||
#define GPIO12_MSP0_TXD PIN_CFG(12, ALT_A) |
||||
#define GPIO12_MSP0_RXD PIN_CFG(12, ALT_B) |
||||
|
||||
#define GPIO13_GPIO PIN_CFG(13, GPIO) |
||||
#define GPIO13_MSP0_TFS PIN_CFG(13, ALT_A) |
||||
|
||||
#define GPIO14_GPIO PIN_CFG(14, GPIO) |
||||
#define GPIO14_MSP0_TCK PIN_CFG(14, ALT_A) |
||||
|
||||
#define GPIO15_GPIO PIN_CFG(15, GPIO) |
||||
#define GPIO15_MSP0_RXD PIN_CFG(15, ALT_A) |
||||
#define GPIO15_MSP0_TXD PIN_CFG(15, ALT_B) |
||||
|
||||
#define GPIO16_GPIO PIN_CFG(16, GPIO) |
||||
#define GPIO16_MSP0_RFS PIN_CFG(16, ALT_A) |
||||
#define GPIO16_I2C1_SCL PIN_CFG_PULL(16, ALT_B, UP) |
||||
#define GPIO16_SLIM0_DAT PIN_CFG(16, ALT_C) |
||||
|
||||
#define GPIO17_GPIO PIN_CFG(17, GPIO) |
||||
#define GPIO17_MSP0_RCK PIN_CFG(17, ALT_A) |
||||
#define GPIO17_I2C1_SDA PIN_CFG_PULL(17, ALT_B, UP) |
||||
#define GPIO17_SLIM0_CLK PIN_CFG(17, ALT_C) |
||||
|
||||
#define GPIO18_GPIO PIN_CFG(18, GPIO) |
||||
#define GPIO18_MC0_CMDDIR PIN_CFG(18, ALT_A) |
||||
#define GPIO18_U2_RXD PIN_CFG(18, ALT_B) |
||||
#define GPIO18_MS_IEP PIN_CFG(18, ALT_C) |
||||
|
||||
#define GPIO19_GPIO PIN_CFG(19, GPIO) |
||||
#define GPIO19_MC0_DAT0DIR PIN_CFG(19, ALT_A) |
||||
#define GPIO19_U2_TXD PIN_CFG(19, ALT_B) |
||||
#define GPIO19_MS_DAT0DIR PIN_CFG(19, ALT_C) |
||||
|
||||
#define GPIO20_GPIO PIN_CFG(20, GPIO) |
||||
#define GPIO20_MC0_DAT2DIR PIN_CFG(20, ALT_A) |
||||
#define GPIO20_UARTMOD_TXD PIN_CFG(20, ALT_B) |
||||
#define GPIO20_IP_TRIGOUT PIN_CFG(20, ALT_C) |
||||
|
||||
#define GPIO21_GPIO PIN_CFG(21, GPIO) |
||||
#define GPIO21_MC0_DAT31DIR PIN_CFG(21, ALT_A) |
||||
#define GPIO21_MSP0_SCK PIN_CFG(21, ALT_B) |
||||
#define GPIO21_MS_DAT31DIR PIN_CFG(21, ALT_C) |
||||
|
||||
#define GPIO22_GPIO PIN_CFG(22, GPIO) |
||||
#define GPIO22_MC0_FBCLK PIN_CFG(22, ALT_A) |
||||
#define GPIO22_UARTMOD_RXD PIN_CFG(22, ALT_B) |
||||
#define GPIO22_MS_FBCLK PIN_CFG(22, ALT_C) |
||||
|
||||
#define GPIO23_GPIO PIN_CFG(23, GPIO) |
||||
#define GPIO23_MC0_CLK PIN_CFG(23, ALT_A) |
||||
#define GPIO23_STMMOD_CLK PIN_CFG(23, ALT_B) |
||||
#define GPIO23_MS_CLK PIN_CFG(23, ALT_C) |
||||
|
||||
#define GPIO24_GPIO PIN_CFG(24, GPIO) |
||||
#define GPIO24_MC0_CMD PIN_CFG(24, ALT_A) |
||||
#define GPIO24_UARTMOD_RXD PIN_CFG(24, ALT_B) |
||||
#define GPIO24_MS_BS PIN_CFG(24, ALT_C) |
||||
|
||||
#define GPIO25_GPIO PIN_CFG(25, GPIO) |
||||
#define GPIO25_MC0_DAT0 PIN_CFG(25, ALT_A) |
||||
#define GPIO25_STMMOD_DAT0 PIN_CFG(25, ALT_B) |
||||
#define GPIO25_MS_DAT0 PIN_CFG(25, ALT_C) |
||||
|
||||
#define GPIO26_GPIO PIN_CFG(26, GPIO) |
||||
#define GPIO26_MC0_DAT1 PIN_CFG(26, ALT_A) |
||||
#define GPIO26_STMMOD_DAT1 PIN_CFG(26, ALT_B) |
||||
#define GPIO26_MS_DAT1 PIN_CFG(26, ALT_C) |
||||
|
||||
#define GPIO27_GPIO PIN_CFG(27, GPIO) |
||||
#define GPIO27_MC0_DAT2 PIN_CFG(27, ALT_A) |
||||
#define GPIO27_STMMOD_DAT2 PIN_CFG(27, ALT_B) |
||||
#define GPIO27_MS_DAT2 PIN_CFG(27, ALT_C) |
||||
|
||||
#define GPIO28_GPIO PIN_CFG(28, GPIO) |
||||
#define GPIO28_MC0_DAT3 PIN_CFG(28, ALT_A) |
||||
#define GPIO28_STMMOD_DAT3 PIN_CFG(28, ALT_B) |
||||
#define GPIO28_MS_DAT3 PIN_CFG(28, ALT_C) |
||||
|
||||
#define GPIO29_GPIO PIN_CFG(29, GPIO) |
||||
#define GPIO29_MC0_DAT4 PIN_CFG(29, ALT_A) |
||||
#define GPIO29_SPI3_CLK PIN_CFG(29, ALT_B) |
||||
#define GPIO29_U2_RXD PIN_CFG(29, ALT_C) |
||||
|
||||
#define GPIO30_GPIO PIN_CFG(30, GPIO) |
||||
#define GPIO30_MC0_DAT5 PIN_CFG(30, ALT_A) |
||||
#define GPIO30_SPI3_RXD PIN_CFG(30, ALT_B) |
||||
#define GPIO30_U2_TXD PIN_CFG(30, ALT_C) |
||||
|
||||
#define GPIO31_GPIO PIN_CFG(31, GPIO) |
||||
#define GPIO31_MC0_DAT6 PIN_CFG(31, ALT_A) |
||||
#define GPIO31_SPI3_FRM PIN_CFG(31, ALT_B) |
||||
#define GPIO31_U2_CTSn PIN_CFG(31, ALT_C) |
||||
|
||||
#define GPIO32_GPIO PIN_CFG(32, GPIO) |
||||
#define GPIO32_MC0_DAT7 PIN_CFG(32, ALT_A) |
||||
#define GPIO32_SPI3_TXD PIN_CFG(32, ALT_B) |
||||
#define GPIO32_U2_RTSn PIN_CFG(32, ALT_C) |
||||
|
||||
#define GPIO33_GPIO PIN_CFG(33, GPIO) |
||||
#define GPIO33_MSP1_TXD PIN_CFG(33, ALT_A) |
||||
#define GPIO33_MSP1_RXD PIN_CFG(33, ALT_B) |
||||
#define GPIO33_U0_DTRn PIN_CFG(33, ALT_C) |
||||
|
||||
#define GPIO34_GPIO PIN_CFG(34, GPIO) |
||||
#define GPIO34_MSP1_TFS PIN_CFG(34, ALT_A) |
||||
#define GPIO34_NONE PIN_CFG(34, ALT_B) |
||||
#define GPIO34_U0_DCDn PIN_CFG(34, ALT_C) |
||||
|
||||
#define GPIO35_GPIO PIN_CFG(35, GPIO) |
||||
#define GPIO35_MSP1_TCK PIN_CFG(35, ALT_A) |
||||
#define GPIO35_NONE PIN_CFG(35, ALT_B) |
||||
#define GPIO35_U0_DSRn PIN_CFG(35, ALT_C) |
||||
|
||||
#define GPIO36_GPIO PIN_CFG(36, GPIO) |
||||
#define GPIO36_MSP1_RXD PIN_CFG(36, ALT_A) |
||||
#define GPIO36_MSP1_TXD PIN_CFG(36, ALT_B) |
||||
#define GPIO36_U0_RIn PIN_CFG(36, ALT_C) |
||||
|
||||
#define GPIO64_GPIO PIN_CFG(64, GPIO) |
||||
#define GPIO64_LCDB_DE PIN_CFG(64, ALT_A) |
||||
#define GPIO64_KP_O1 PIN_CFG(64, ALT_B) |
||||
#define GPIO64_IP_GPIO4 PIN_CFG(64, ALT_C) |
||||
|
||||
#define GPIO65_GPIO PIN_CFG(65, GPIO) |
||||
#define GPIO65_LCDB_HSO PIN_CFG(65, ALT_A) |
||||
#define GPIO65_KP_O0 PIN_CFG(65, ALT_B) |
||||
#define GPIO65_IP_GPIO5 PIN_CFG(65, ALT_C) |
||||
|
||||
#define GPIO66_GPIO PIN_CFG(66, GPIO) |
||||
#define GPIO66_LCDB_VSO PIN_CFG(66, ALT_A) |
||||
#define GPIO66_KP_I1 PIN_CFG(66, ALT_B) |
||||
#define GPIO66_IP_GPIO6 PIN_CFG(66, ALT_C) |
||||
|
||||
#define GPIO67_GPIO PIN_CFG(67, GPIO) |
||||
#define GPIO67_LCDB_CLK PIN_CFG(67, ALT_A) |
||||
#define GPIO67_KP_I0 PIN_CFG(67, ALT_B) |
||||
#define GPIO67_IP_GPIO7 PIN_CFG(67, ALT_C) |
||||
|
||||
#define GPIO68_GPIO PIN_CFG(68, GPIO) |
||||
#define GPIO68_LCD_VSI0 PIN_CFG(68, ALT_A) |
||||
#define GPIO68_KP_O7 PIN_CFG(68, ALT_B) |
||||
#define GPIO68_SM_CLE PIN_CFG(68, ALT_C) |
||||
|
||||
#define GPIO69_GPIO PIN_CFG(69, GPIO) |
||||
#define GPIO69_LCD_VSI1 PIN_CFG(69, ALT_A) |
||||
#define GPIO69_KP_I7 PIN_CFG(69, ALT_B) |
||||
#define GPIO69_SM_ALE PIN_CFG(69, ALT_C) |
||||
|
||||
#define GPIO70_GPIO PIN_CFG(70, GPIO) |
||||
#define GPIO70_LCD_D0 PIN_CFG(70, ALT_A) |
||||
#define GPIO70_KP_O5 PIN_CFG(70, ALT_B) |
||||
#define GPIO70_STMAPE_CLK PIN_CFG(70, ALT_C) |
||||
|
||||
#define GPIO71_GPIO PIN_CFG(71, GPIO) |
||||
#define GPIO71_LCD_D1 PIN_CFG(71, ALT_A) |
||||
#define GPIO71_KP_O4 PIN_CFG(71, ALT_B) |
||||
#define GPIO71_STMAPE_DAT3 PIN_CFG(71, ALT_C) |
||||
|
||||
#define GPIO72_GPIO PIN_CFG(72, GPIO) |
||||
#define GPIO72_LCD_D2 PIN_CFG(72, ALT_A) |
||||
#define GPIO72_KP_O3 PIN_CFG(72, ALT_B) |
||||
#define GPIO72_STMAPE_DAT2 PIN_CFG(72, ALT_C) |
||||
|
||||
#define GPIO73_GPIO PIN_CFG(73, GPIO) |
||||
#define GPIO73_LCD_D3 PIN_CFG(73, ALT_A) |
||||
#define GPIO73_KP_O2 PIN_CFG(73, ALT_B) |
||||
#define GPIO73_STMAPE_DAT1 PIN_CFG(73, ALT_C) |
||||
|
||||
#define GPIO74_GPIO PIN_CFG(74, GPIO) |
||||
#define GPIO74_LCD_D4 PIN_CFG(74, ALT_A) |
||||
#define GPIO74_KP_I5 PIN_CFG(74, ALT_B) |
||||
#define GPIO74_STMAPE_DAT0 PIN_CFG(74, ALT_C) |
||||
|
||||
#define GPIO75_GPIO PIN_CFG(75, GPIO) |
||||
#define GPIO75_LCD_D5 PIN_CFG(75, ALT_A) |
||||
#define GPIO75_KP_I4 PIN_CFG(75, ALT_B) |
||||
#define GPIO75_U2_RXD PIN_CFG(75, ALT_C) |
||||
|
||||
#define GPIO76_GPIO PIN_CFG(76, GPIO) |
||||
#define GPIO76_LCD_D6 PIN_CFG(76, ALT_A) |
||||
#define GPIO76_KP_I3 PIN_CFG(76, ALT_B) |
||||
#define GPIO76_U2_TXD PIN_CFG(76, ALT_C) |
||||
|
||||
#define GPIO77_GPIO PIN_CFG(77, GPIO) |
||||
#define GPIO77_LCD_D7 PIN_CFG(77, ALT_A) |
||||
#define GPIO77_KP_I2 PIN_CFG(77, ALT_B) |
||||
#define GPIO77_NONE PIN_CFG(77, ALT_C) |
||||
|
||||
#define GPIO78_GPIO PIN_CFG(78, GPIO) |
||||
#define GPIO78_LCD_D8 PIN_CFG(78, ALT_A) |
||||
#define GPIO78_KP_O6 PIN_CFG(78, ALT_B) |
||||
#define GPIO78_IP_GPIO2 PIN_CFG(78, ALT_C) |
||||
|
||||
#define GPIO79_GPIO PIN_CFG(79, GPIO) |
||||
#define GPIO79_LCD_D9 PIN_CFG(79, ALT_A) |
||||
#define GPIO79_KP_I6 PIN_CFG(79, ALT_B) |
||||
#define GPIO79_IP_GPIO3 PIN_CFG(79, ALT_C) |
||||
|
||||
#define GPIO80_GPIO PIN_CFG(80, GPIO) |
||||
#define GPIO80_LCD_D10 PIN_CFG(80, ALT_A) |
||||
#define GPIO80_KP_SKA0 PIN_CFG(80, ALT_B) |
||||
#define GPIO80_IP_GPIO4 PIN_CFG(80, ALT_C) |
||||
|
||||
#define GPIO81_GPIO PIN_CFG(81, GPIO) |
||||
#define GPIO81_LCD_D11 PIN_CFG(81, ALT_A) |
||||
#define GPIO81_KP_SKB0 PIN_CFG(81, ALT_B) |
||||
#define GPIO81_IP_GPIO5 PIN_CFG(81, ALT_C) |
||||
|
||||
#define GPIO82_GPIO PIN_CFG(82, GPIO) |
||||
#define GPIO82_LCD_D12 PIN_CFG(82, ALT_A) |
||||
#define GPIO82_KP_O5 PIN_CFG(82, ALT_B) |
||||
|
||||
#define GPIO83_GPIO PIN_CFG(83, GPIO) |
||||
#define GPIO83_LCD_D13 PIN_CFG(83, ALT_A) |
||||
#define GPIO83_KP_O4 PIN_CFG(83, ALT_B) |
||||
|
||||
#define GPIO84_GPIO PIN_CFG_PULL(84, GPIO, UP) |
||||
#define GPIO84_LCD_D14 PIN_CFG(84, ALT_A) |
||||
#define GPIO84_KP_I5 PIN_CFG(84, ALT_B) |
||||
|
||||
#define GPIO85_GPIO PIN_CFG(85, GPIO) |
||||
#define GPIO85_LCD_D15 PIN_CFG(85, ALT_A) |
||||
#define GPIO85_KP_I4 PIN_CFG(85, ALT_B) |
||||
|
||||
#define GPIO86_GPIO PIN_CFG(86, GPIO) |
||||
#define GPIO86_LCD_D16 PIN_CFG(86, ALT_A) |
||||
#define GPIO86_SM_ADQ0 PIN_CFG(86, ALT_B) |
||||
#define GPIO86_MC5_DAT0 PIN_CFG(86, ALT_C) |
||||
|
||||
#define GPIO87_GPIO PIN_CFG(87, GPIO) |
||||
#define GPIO87_LCD_D17 PIN_CFG(87, ALT_A) |
||||
#define GPIO87_SM_ADQ1 PIN_CFG(87, ALT_B) |
||||
#define GPIO87_MC5_DAT1 PIN_CFG(87, ALT_C) |
||||
|
||||
#define GPIO88_GPIO PIN_CFG(88, GPIO) |
||||
#define GPIO88_LCD_D18 PIN_CFG(88, ALT_A) |
||||
#define GPIO88_SM_ADQ2 PIN_CFG(88, ALT_B) |
||||
#define GPIO88_MC5_DAT2 PIN_CFG(88, ALT_C) |
||||
|
||||
#define GPIO89_GPIO PIN_CFG(89, GPIO) |
||||
#define GPIO89_LCD_D19 PIN_CFG(89, ALT_A) |
||||
#define GPIO89_SM_ADQ3 PIN_CFG(89, ALT_B) |
||||
#define GPIO89_MC5_DAT3 PIN_CFG(89, ALT_C) |
||||
|
||||
#define GPIO90_GPIO PIN_CFG(90, GPIO) |
||||
#define GPIO90_LCD_D20 PIN_CFG(90, ALT_A) |
||||
#define GPIO90_SM_ADQ4 PIN_CFG(90, ALT_B) |
||||
#define GPIO90_MC5_CMD PIN_CFG(90, ALT_C) |
||||
|
||||
#define GPIO91_GPIO PIN_CFG(91, GPIO) |
||||
#define GPIO91_LCD_D21 PIN_CFG(91, ALT_A) |
||||
#define GPIO91_SM_ADQ5 PIN_CFG(91, ALT_B) |
||||
#define GPIO91_MC5_FBCLK PIN_CFG(91, ALT_C) |
||||
|
||||
#define GPIO92_GPIO PIN_CFG(92, GPIO) |
||||
#define GPIO92_LCD_D22 PIN_CFG(92, ALT_A) |
||||
#define GPIO92_SM_ADQ6 PIN_CFG(92, ALT_B) |
||||
#define GPIO92_MC5_CLK PIN_CFG(92, ALT_C) |
||||
|
||||
#define GPIO93_GPIO PIN_CFG(93, GPIO) |
||||
#define GPIO93_LCD_D23 PIN_CFG(93, ALT_A) |
||||
#define GPIO93_SM_ADQ7 PIN_CFG(93, ALT_B) |
||||
#define GPIO93_MC5_DAT4 PIN_CFG(93, ALT_C) |
||||
|
||||
#define GPIO94_GPIO PIN_CFG(94, GPIO) |
||||
#define GPIO94_KP_O7 PIN_CFG(94, ALT_A) |
||||
#define GPIO94_SM_ADVn PIN_CFG(94, ALT_B) |
||||
#define GPIO94_MC5_DAT5 PIN_CFG(94, ALT_C) |
||||
|
||||
#define GPIO95_GPIO PIN_CFG(95, GPIO) |
||||
#define GPIO95_KP_I7 PIN_CFG(95, ALT_A) |
||||
#define GPIO95_SM_CS0n PIN_CFG(95, ALT_B) |
||||
#define GPIO95_SM_PS0n PIN_CFG(95, ALT_C) |
||||
|
||||
#define GPIO96_GPIO PIN_CFG(96, GPIO) |
||||
#define GPIO96_KP_O6 PIN_CFG(96, ALT_A) |
||||
#define GPIO96_SM_OEn PIN_CFG(96, ALT_B) |
||||
#define GPIO96_MC5_DAT6 PIN_CFG(96, ALT_C) |
||||
|
||||
#define GPIO97_GPIO PIN_CFG(97, GPIO) |
||||
#define GPIO97_KP_I6 PIN_CFG(97, ALT_A) |
||||
#define GPIO97_SM_WEn PIN_CFG(97, ALT_B) |
||||
#define GPIO97_MC5_DAT7 PIN_CFG(97, ALT_C) |
||||
|
||||
#define GPIO128_GPIO PIN_CFG(128, GPIO) |
||||
#define GPIO128_MC2_CLK PIN_CFG(128, ALT_A) |
||||
#define GPIO128_SM_CKO PIN_CFG(128, ALT_B) |
||||
|
||||
#define GPIO129_GPIO PIN_CFG(129, GPIO) |
||||
#define GPIO129_MC2_CMD PIN_CFG(129, ALT_A) |
||||
#define GPIO129_SM_WAIT0n PIN_CFG(129, ALT_B) |
||||
|
||||
#define GPIO130_GPIO PIN_CFG(130, GPIO) |
||||
#define GPIO130_MC2_FBCLK PIN_CFG(130, ALT_A) |
||||
#define GPIO130_SM_FBCLK PIN_CFG(130, ALT_B) |
||||
#define GPIO130_MC2_RSTN PIN_CFG(130, ALT_C) |
||||
|
||||
#define GPIO131_GPIO PIN_CFG(131, GPIO) |
||||
#define GPIO131_MC2_DAT0 PIN_CFG(131, ALT_A) |
||||
#define GPIO131_SM_ADQ8 PIN_CFG(131, ALT_B) |
||||
|
||||
#define GPIO132_GPIO PIN_CFG(132, GPIO) |
||||
#define GPIO132_MC2_DAT1 PIN_CFG(132, ALT_A) |
||||
#define GPIO132_SM_ADQ9 PIN_CFG(132, ALT_B) |
||||
|
||||
#define GPIO133_GPIO PIN_CFG(133, GPIO) |
||||
#define GPIO133_MC2_DAT2 PIN_CFG(133, ALT_A) |
||||
#define GPIO133_SM_ADQ10 PIN_CFG(133, ALT_B) |
||||
|
||||
#define GPIO134_GPIO PIN_CFG(134, GPIO) |
||||
#define GPIO134_MC2_DAT3 PIN_CFG(134, ALT_A) |
||||
#define GPIO134_SM_ADQ11 PIN_CFG(134, ALT_B) |
||||
|
||||
#define GPIO135_GPIO PIN_CFG(135, GPIO) |
||||
#define GPIO135_MC2_DAT4 PIN_CFG(135, ALT_A) |
||||
#define GPIO135_SM_ADQ12 PIN_CFG(135, ALT_B) |
||||
|
||||
#define GPIO136_GPIO PIN_CFG(136, GPIO) |
||||
#define GPIO136_MC2_DAT5 PIN_CFG(136, ALT_A) |
||||
#define GPIO136_SM_ADQ13 PIN_CFG(136, ALT_B) |
||||
|
||||
#define GPIO137_GPIO PIN_CFG(137, GPIO) |
||||
#define GPIO137_MC2_DAT6 PIN_CFG(137, ALT_A) |
||||
#define GPIO137_SM_ADQ14 PIN_CFG(137, ALT_B) |
||||
|
||||
#define GPIO138_GPIO PIN_CFG(138, GPIO) |
||||
#define GPIO138_MC2_DAT7 PIN_CFG(138, ALT_A) |
||||
#define GPIO138_SM_ADQ15 PIN_CFG(138, ALT_B) |
||||
|
||||
#define GPIO139_GPIO PIN_CFG(139, GPIO) |
||||
#define GPIO139_SSP1_RXD PIN_CFG(139, ALT_A) |
||||
#define GPIO139_SM_WAIT1n PIN_CFG(139, ALT_B) |
||||
#define GPIO139_KP_O8 PIN_CFG(139, ALT_C) |
||||
|
||||
#define GPIO140_GPIO PIN_CFG(140, GPIO) |
||||
#define GPIO140_SSP1_TXD PIN_CFG(140, ALT_A) |
||||
#define GPIO140_IP_GPIO7 PIN_CFG(140, ALT_B) |
||||
#define GPIO140_KP_SKA1 PIN_CFG(140, ALT_C) |
||||
|
||||
#define GPIO141_GPIO PIN_CFG(141, GPIO) |
||||
#define GPIO141_SSP1_CLK PIN_CFG(141, ALT_A) |
||||
#define GPIO141_IP_GPIO2 PIN_CFG(141, ALT_B) |
||||
#define GPIO141_KP_O9 PIN_CFG(141, ALT_C) |
||||
|
||||
#define GPIO142_GPIO PIN_CFG(142, GPIO) |
||||
#define GPIO142_SSP1_FRM PIN_CFG(142, ALT_A) |
||||
#define GPIO142_IP_GPIO3 PIN_CFG(142, ALT_B) |
||||
#define GPIO142_KP_SKB1 PIN_CFG(142, ALT_C) |
||||
|
||||
#define GPIO143_GPIO PIN_CFG(143, GPIO) |
||||
#define GPIO143_SSP0_CLK PIN_CFG(143, ALT_A) |
||||
|
||||
#define GPIO144_GPIO PIN_CFG(144, GPIO) |
||||
#define GPIO144_SSP0_FRM PIN_CFG(144, ALT_A) |
||||
|
||||
#define GPIO145_GPIO PIN_CFG(145, GPIO) |
||||
#define GPIO145_SSP0_RXD PIN_CFG(145, ALT_A) |
||||
|
||||
#define GPIO146_GPIO PIN_CFG(146, GPIO) |
||||
#define GPIO146_SSP0_TXD PIN_CFG(146, ALT_A) |
||||
|
||||
#define GPIO147_GPIO PIN_CFG(147, GPIO) |
||||
#define GPIO147_I2C0_SCL PIN_CFG_PULL(147, ALT_A, UP) |
||||
|
||||
#define GPIO148_GPIO PIN_CFG(148, GPIO) |
||||
#define GPIO148_I2C0_SDA PIN_CFG_PULL(148, ALT_A, UP) |
||||
|
||||
#define GPIO149_GPIO PIN_CFG(149, GPIO) |
||||
#define GPIO149_IP_GPIO0 PIN_CFG(149, ALT_A) |
||||
#define GPIO149_SM_CS1n PIN_CFG(149, ALT_B) |
||||
#define GPIO149_SM_PS1n PIN_CFG(149, ALT_C) |
||||
|
||||
#define GPIO150_GPIO PIN_CFG(150, GPIO) |
||||
#define GPIO150_IP_GPIO1 PIN_CFG(150, ALT_A) |
||||
#define GPIO150_LCDA_CLK PIN_CFG(150, ALT_B) |
||||
|
||||
#define GPIO151_GPIO PIN_CFG(151, GPIO) |
||||
#define GPIO151_KP_SKA0 PIN_CFG(151, ALT_A) |
||||
#define GPIO151_LCD_VSI0 PIN_CFG(151, ALT_B) |
||||
#define GPIO151_KP_O8 PIN_CFG(151, ALT_C) |
||||
|
||||
#define GPIO152_GPIO PIN_CFG(152, GPIO) |
||||
#define GPIO152_KP_SKB0 PIN_CFG(152, ALT_A) |
||||
#define GPIO152_LCD_VSI1 PIN_CFG(152, ALT_B) |
||||
#define GPIO152_KP_O9 PIN_CFG(152, ALT_C) |
||||
|
||||
#define GPIO153_GPIO PIN_CFG(153, GPIO) |
||||
#define GPIO153_KP_I7 PIN_CFG_PULL(153, ALT_A, DOWN) |
||||
#define GPIO153_LCD_D24 PIN_CFG(153, ALT_B) |
||||
#define GPIO153_U2_RXD PIN_CFG(153, ALT_C) |
||||
|
||||
#define GPIO154_GPIO PIN_CFG(154, GPIO) |
||||
#define GPIO154_KP_I6 PIN_CFG_PULL(154, ALT_A, DOWN) |
||||
#define GPIO154_LCD_D25 PIN_CFG(154, ALT_B) |
||||
#define GPIO154_U2_TXD PIN_CFG(154, ALT_C) |
||||
|
||||
#define GPIO155_GPIO PIN_CFG(155, GPIO) |
||||
#define GPIO155_KP_I5 PIN_CFG_PULL(155, ALT_A, DOWN) |
||||
#define GPIO155_LCD_D26 PIN_CFG(155, ALT_B) |
||||
#define GPIO155_STMAPE_CLK PIN_CFG(155, ALT_C) |
||||
|
||||
#define GPIO156_GPIO PIN_CFG(156, GPIO) |
||||
#define GPIO156_KP_I4 PIN_CFG_PULL(156, ALT_A, DOWN) |
||||
#define GPIO156_LCD_D27 PIN_CFG(156, ALT_B) |
||||
#define GPIO156_STMAPE_DAT3 PIN_CFG(156, ALT_C) |
||||
|
||||
#define GPIO157_GPIO PIN_CFG(157, GPIO) |
||||
#define GPIO157_KP_O7 PIN_CFG_PULL(157, ALT_A, UP) |
||||
#define GPIO157_LCD_D28 PIN_CFG(157, ALT_B) |
||||
#define GPIO157_STMAPE_DAT2 PIN_CFG(157, ALT_C) |
||||
|
||||
#define GPIO158_GPIO PIN_CFG(158, GPIO) |
||||
#define GPIO158_KP_O6 PIN_CFG_PULL(158, ALT_A, UP) |
||||
#define GPIO158_LCD_D29 PIN_CFG(158, ALT_B) |
||||
#define GPIO158_STMAPE_DAT1 PIN_CFG(158, ALT_C) |
||||
|
||||
#define GPIO159_GPIO PIN_CFG(159, GPIO) |
||||
#define GPIO159_KP_O5 PIN_CFG_PULL(159, ALT_A, UP) |
||||
#define GPIO159_LCD_D30 PIN_CFG(159, ALT_B) |
||||
#define GPIO159_STMAPE_DAT0 PIN_CFG(159, ALT_C) |
||||
|
||||
#define GPIO160_GPIO PIN_CFG(160, GPIO) |
||||
#define GPIO160_KP_O4 PIN_CFG_PULL(160, ALT_A, UP) |
||||
#define GPIO160_LCD_D31 PIN_CFG(160, ALT_B) |
||||
#define GPIO160_NONE PIN_CFG(160, ALT_C) |
||||
|
||||
#define GPIO161_GPIO PIN_CFG(161, GPIO) |
||||
#define GPIO161_KP_I3 PIN_CFG_PULL(161, ALT_A, DOWN) |
||||
#define GPIO161_LCD_D32 PIN_CFG(161, ALT_B) |
||||
#define GPIO161_UARTMOD_RXD PIN_CFG(161, ALT_C) |
||||
|
||||
#define GPIO162_GPIO PIN_CFG(162, GPIO) |
||||
#define GPIO162_KP_I2 PIN_CFG_PULL(162, ALT_A, DOWN) |
||||
#define GPIO162_LCD_D33 PIN_CFG(162, ALT_B) |
||||
#define GPIO162_UARTMOD_TXD PIN_CFG(162, ALT_C) |
||||
|
||||
#define GPIO163_GPIO PIN_CFG(163, GPIO) |
||||
#define GPIO163_KP_I1 PIN_CFG_PULL(163, ALT_A, DOWN) |
||||
#define GPIO163_LCD_D34 PIN_CFG(163, ALT_B) |
||||
#define GPIO163_STMMOD_CLK PIN_CFG(163, ALT_C) |
||||
|
||||
#define GPIO164_GPIO PIN_CFG(164, GPIO) |
||||
#define GPIO164_KP_I0 PIN_CFG_PULL(164, ALT_A, UP) |
||||
#define GPIO164_LCD_D35 PIN_CFG(164, ALT_B) |
||||
#define GPIO164_STMMOD_DAT3 PIN_CFG(164, ALT_C) |
||||
|
||||
#define GPIO165_GPIO PIN_CFG(165, GPIO) |
||||
#define GPIO165_KP_O3 PIN_CFG_PULL(165, ALT_A, UP) |
||||
#define GPIO165_LCD_D36 PIN_CFG(165, ALT_B) |
||||
#define GPIO165_STMMOD_DAT2 PIN_CFG(165, ALT_C) |
||||
|
||||
#define GPIO166_GPIO PIN_CFG(166, GPIO) |
||||
#define GPIO166_KP_O2 PIN_CFG_PULL(166, ALT_A, UP) |
||||
#define GPIO166_LCD_D37 PIN_CFG(166, ALT_B) |
||||
#define GPIO166_STMMOD_DAT1 PIN_CFG(166, ALT_C) |
||||
|
||||
#define GPIO167_GPIO PIN_CFG(167, GPIO) |
||||
#define GPIO167_KP_O1 PIN_CFG_PULL(167, ALT_A, UP) |
||||
#define GPIO167_LCD_D38 PIN_CFG(167, ALT_B) |
||||
#define GPIO167_STMMOD_DAT0 PIN_CFG(167, ALT_C) |
||||
|
||||
#define GPIO168_GPIO PIN_CFG(168, GPIO) |
||||
#define GPIO168_KP_O0 PIN_CFG_PULL(168, ALT_A, UP) |
||||
#define GPIO168_LCD_D39 PIN_CFG(168, ALT_B) |
||||
#define GPIO168_NONE PIN_CFG(168, ALT_C) |
||||
|
||||
#define GPIO169_GPIO PIN_CFG(169, GPIO) |
||||
#define GPIO169_RF_PURn PIN_CFG(169, ALT_A) |
||||
#define GPIO169_LCDA_DE PIN_CFG(169, ALT_B) |
||||
#define GPIO169_USBSIM_PDC PIN_CFG(169, ALT_C) |
||||
|
||||
#define GPIO170_GPIO PIN_CFG(170, GPIO) |
||||
#define GPIO170_MODEM_STATE PIN_CFG(170, ALT_A) |
||||
#define GPIO170_LCDA_VSO PIN_CFG(170, ALT_B) |
||||
#define GPIO170_KP_SKA1 PIN_CFG(170, ALT_C) |
||||
|
||||
#define GPIO171_GPIO PIN_CFG(171, GPIO) |
||||
#define GPIO171_MODEM_PWREN PIN_CFG(171, ALT_A) |
||||
#define GPIO171_LCDA_HSO PIN_CFG(171, ALT_B) |
||||
#define GPIO171_KP_SKB1 PIN_CFG(171, ALT_C) |
||||
|
||||
#define GPIO192_GPIO PIN_CFG(192, GPIO) |
||||
#define GPIO192_MSP2_SCK PIN_CFG(192, ALT_A) |
||||
|
||||
#define GPIO193_GPIO PIN_CFG(193, GPIO) |
||||
#define GPIO193_MSP2_TXD PIN_CFG(193, ALT_A) |
||||
|
||||
#define GPIO194_GPIO PIN_CFG(194, GPIO) |
||||
#define GPIO194_MSP2_TCK PIN_CFG(194, ALT_A) |
||||
|
||||
#define GPIO195_GPIO PIN_CFG(195, GPIO) |
||||
#define GPIO195_MSP2_TFS PIN_CFG(195, ALT_A) |
||||
|
||||
#define GPIO196_GPIO PIN_CFG(196, GPIO) |
||||
#define GPIO196_MSP2_RXD PIN_CFG(196, ALT_A) |
||||
|
||||
#define GPIO197_GPIO PIN_CFG(197, GPIO) |
||||
#define GPIO197_MC4_DAT3 PIN_CFG(197, ALT_A) |
||||
|
||||
#define GPIO198_GPIO PIN_CFG(198, GPIO) |
||||
#define GPIO198_MC4_DAT2 PIN_CFG(198, ALT_A) |
||||
|
||||
#define GPIO199_GPIO PIN_CFG(199, GPIO) |
||||
#define GPIO199_MC4_DAT1 PIN_CFG(199, ALT_A) |
||||
|
||||
#define GPIO200_GPIO PIN_CFG(200, GPIO) |
||||
#define GPIO200_MC4_DAT0 PIN_CFG(200, ALT_A) |
||||
|
||||
#define GPIO201_GPIO PIN_CFG(201, GPIO) |
||||
#define GPIO201_MC4_CMD PIN_CFG(201, ALT_A) |
||||
|
||||
#define GPIO202_GPIO PIN_CFG(202, GPIO) |
||||
#define GPIO202_MC4_FBCLK PIN_CFG(202, ALT_A) |
||||
#define GPIO202_PWL PIN_CFG(202, ALT_B) |
||||
#define GPIO202_MC4_RSTN PIN_CFG(202, ALT_C) |
||||
|
||||
#define GPIO203_GPIO PIN_CFG(203, GPIO) |
||||
#define GPIO203_MC4_CLK PIN_CFG(203, ALT_A) |
||||
|
||||
#define GPIO204_GPIO PIN_CFG(204, GPIO) |
||||
#define GPIO204_MC4_DAT7 PIN_CFG(204, ALT_A) |
||||
|
||||
#define GPIO205_GPIO PIN_CFG(205, GPIO) |
||||
#define GPIO205_MC4_DAT6 PIN_CFG(205, ALT_A) |
||||
|
||||
#define GPIO206_GPIO PIN_CFG(206, GPIO) |
||||
#define GPIO206_MC4_DAT5 PIN_CFG(206, ALT_A) |
||||
|
||||
#define GPIO207_GPIO PIN_CFG(207, GPIO) |
||||
#define GPIO207_MC4_DAT4 PIN_CFG(207, ALT_A) |
||||
|
||||
#define GPIO208_GPIO PIN_CFG(208, GPIO) |
||||
#define GPIO208_MC1_CLK PIN_CFG(208, ALT_A) |
||||
|
||||
#define GPIO209_GPIO PIN_CFG(209, GPIO) |
||||
#define GPIO209_MC1_FBCLK PIN_CFG(209, ALT_A) |
||||
#define GPIO209_SPI1_CLK PIN_CFG(209, ALT_B) |
||||
|
||||
#define GPIO210_GPIO PIN_CFG(210, GPIO) |
||||
#define GPIO210_MC1_CMD PIN_CFG(210, ALT_A) |
||||
|
||||
#define GPIO211_GPIO PIN_CFG(211, GPIO) |
||||
#define GPIO211_MC1_DAT0 PIN_CFG(211, ALT_A) |
||||
|
||||
#define GPIO212_GPIO PIN_CFG(212, GPIO) |
||||
#define GPIO212_MC1_DAT1 PIN_CFG(212, ALT_A) |
||||
#define GPIO212_SPI1_FRM PIN_CFG(212, ALT_B) |
||||
|
||||
#define GPIO213_GPIO PIN_CFG(213, GPIO) |
||||
#define GPIO213_MC1_DAT2 PIN_CFG(213, ALT_A) |
||||
#define GPIO213_SPI1_TXD PIN_CFG(213, ALT_B) |
||||
|
||||
#define GPIO214_GPIO PIN_CFG(214, GPIO) |
||||
#define GPIO214_MC1_DAT3 PIN_CFG(214, ALT_A) |
||||
#define GPIO214_SPI1_RXD PIN_CFG(214, ALT_B) |
||||
|
||||
#define GPIO215_GPIO PIN_CFG(215, GPIO) |
||||
#define GPIO215_MC1_CMDDIR PIN_CFG(215, ALT_A) |
||||
#define GPIO215_MC3_DAT2DIR PIN_CFG(215, ALT_B) |
||||
#define GPIO215_CLKOUT1 PIN_CFG(215, ALT_C) |
||||
|
||||
#define GPIO216_GPIO PIN_CFG(216, GPIO) |
||||
#define GPIO216_MC1_DAT2DIR PIN_CFG(216, ALT_A) |
||||
#define GPIO216_MC3_CMDDIR PIN_CFG(216, ALT_B) |
||||
#define GPIO216_I2C3_SDA PIN_CFG_PULL(216, ALT_C, UP) |
||||
|
||||
#define GPIO217_GPIO PIN_CFG(217, GPIO) |
||||
#define GPIO217_MC1_DAT0DIR PIN_CFG(217, ALT_A) |
||||
#define GPIO217_MC3_DAT31DIR PIN_CFG(217, ALT_B) |
||||
#define GPIO217_CLKOUT2 PIN_CFG(217, ALT_C) |
||||
|
||||
#define GPIO218_GPIO PIN_CFG(218, GPIO) |
||||
#define GPIO218_MC1_DAT31DIR PIN_CFG(218, ALT_A) |
||||
#define GPIO218_MC3_DAT0DIR PIN_CFG(218, ALT_B) |
||||
#define GPIO218_I2C3_SCL PIN_CFG_PULL(218, ALT_C, UP) |
||||
|
||||
#define GPIO219_GPIO PIN_CFG(219, GPIO) |
||||
#define GPIO219_HSIR_FLA0 PIN_CFG(219, ALT_A) |
||||
#define GPIO219_MC3_CLK PIN_CFG(219, ALT_B) |
||||
|
||||
#define GPIO220_GPIO PIN_CFG(220, GPIO) |
||||
#define GPIO220_HSIR_DAT0 PIN_CFG(220, ALT_A) |
||||
#define GPIO220_MC3_FBCLK PIN_CFG(220, ALT_B) |
||||
#define GPIO220_SPI0_CLK PIN_CFG(220, ALT_C) |
||||
|
||||
#define GPIO221_GPIO PIN_CFG(221, GPIO) |
||||
#define GPIO221_HSIR_RDY0 PIN_CFG(221, ALT_A) |
||||
#define GPIO221_MC3_CMD PIN_CFG(221, ALT_B) |
||||
|
||||
#define GPIO222_GPIO PIN_CFG(222, GPIO) |
||||
#define GPIO222_HSIT_FLA0 PIN_CFG(222, ALT_A) |
||||
#define GPIO222_MC3_DAT0 PIN_CFG(222, ALT_B) |
||||
|
||||
#define GPIO223_GPIO PIN_CFG(223, GPIO) |
||||
#define GPIO223_HSIT_DAT0 PIN_CFG(223, ALT_A) |
||||
#define GPIO223_MC3_DAT1 PIN_CFG(223, ALT_B) |
||||
#define GPIO223_SPI0_FRM PIN_CFG(223, ALT_C) |
||||
|
||||
#define GPIO224_GPIO PIN_CFG(224, GPIO) |
||||
#define GPIO224_HSIT_RDY0 PIN_CFG(224, ALT_A) |
||||
#define GPIO224_MC3_DAT2 PIN_CFG(224, ALT_B) |
||||
#define GPIO224_SPI0_TXD PIN_CFG(224, ALT_C) |
||||
|
||||
#define GPIO225_GPIO PIN_CFG(225, GPIO) |
||||
#define GPIO225_HSIT_CAWAKE0 PIN_CFG(225, ALT_A) |
||||
#define GPIO225_MC3_DAT3 PIN_CFG(225, ALT_B) |
||||
#define GPIO225_SPI0_RXD PIN_CFG(225, ALT_C) |
||||
|
||||
#define GPIO226_GPIO PIN_CFG(226, GPIO) |
||||
#define GPIO226_HSIT_ACWAKE0 PIN_CFG(226, ALT_A) |
||||
#define GPIO226_PWL PIN_CFG(226, ALT_B) |
||||
#define GPIO226_USBSIM_PDC PIN_CFG(226, ALT_C) |
||||
|
||||
#define GPIO227_GPIO PIN_CFG(227, GPIO) |
||||
#define GPIO227_CLKOUT1 PIN_CFG(227, ALT_A) |
||||
|
||||
#define GPIO228_GPIO PIN_CFG(228, GPIO) |
||||
#define GPIO228_CLKOUT2 PIN_CFG(228, ALT_A) |
||||
|
||||
#define GPIO229_GPIO PIN_CFG(229, GPIO) |
||||
#define GPIO229_CLKOUT1 PIN_CFG(229, ALT_A) |
||||
#define GPIO229_PWL PIN_CFG(229, ALT_B) |
||||
#define GPIO229_I2C3_SDA PIN_CFG_PULL(229, ALT_C, UP) |
||||
|
||||
#define GPIO230_GPIO PIN_CFG(230, GPIO) |
||||
#define GPIO230_CLKOUT2 PIN_CFG(230, ALT_A) |
||||
#define GPIO230_PWL PIN_CFG(230, ALT_B) |
||||
#define GPIO230_I2C3_SCL PIN_CFG_PULL(230, ALT_C, UP) |
||||
|
||||
#define GPIO256_GPIO PIN_CFG(256, GPIO) |
||||
#define GPIO256_USB_NXT PIN_CFG(256, ALT_A) |
||||
|
||||
#define GPIO257_GPIO PIN_CFG(257, GPIO) |
||||
#define GPIO257_USB_STP PIN_CFG(257, ALT_A) |
||||
|
||||
#define GPIO258_GPIO PIN_CFG(258, GPIO) |
||||
#define GPIO258_USB_XCLK PIN_CFG(258, ALT_A) |
||||
#define GPIO258_NONE PIN_CFG(258, ALT_B) |
||||
#define GPIO258_DDR_TRIG PIN_CFG(258, ALT_C) |
||||
|
||||
#define GPIO259_GPIO PIN_CFG(259, GPIO) |
||||
#define GPIO259_USB_DIR PIN_CFG(259, ALT_A) |
||||
|
||||
#define GPIO260_GPIO PIN_CFG(260, GPIO) |
||||
#define GPIO260_USB_DAT7 PIN_CFG(260, ALT_A) |
||||
|
||||
#define GPIO261_GPIO PIN_CFG(261, GPIO) |
||||
#define GPIO261_USB_DAT6 PIN_CFG(261, ALT_A) |
||||
|
||||
#define GPIO262_GPIO PIN_CFG(262, GPIO) |
||||
#define GPIO262_USB_DAT5 PIN_CFG(262, ALT_A) |
||||
|
||||
#define GPIO263_GPIO PIN_CFG(263, GPIO) |
||||
#define GPIO263_USB_DAT4 PIN_CFG(263, ALT_A) |
||||
|
||||
#define GPIO264_GPIO PIN_CFG(264, GPIO) |
||||
#define GPIO264_USB_DAT3 PIN_CFG(264, ALT_A) |
||||
|
||||
#define GPIO265_GPIO PIN_CFG(265, GPIO) |
||||
#define GPIO265_USB_DAT2 PIN_CFG(265, ALT_A) |
||||
|
||||
#define GPIO266_GPIO PIN_CFG(266, GPIO) |
||||
#define GPIO266_USB_DAT1 PIN_CFG(266, ALT_A) |
||||
|
||||
#define GPIO267_GPIO PIN_CFG(267, GPIO) |
||||
#define GPIO267_USB_DAT0 PIN_CFG(267, ALT_A) |
||||
|
||||
#endif |
||||
@ -0,0 +1,166 @@ |
||||
/*
|
||||
* Copyright (C) ST-Ericsson SA 2009 |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License as published by |
||||
* the Free Software Foundation; either version 2 of the License, or |
||||
* (at your option) any later version. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* You should have received a copy of the GNU General Public License |
||||
* along with this program; if not, write to the Free Software |
||||
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
||||
*/ |
||||
|
||||
#include <config.h> |
||||
#include <common.h> |
||||
#include <malloc.h> |
||||
#include <i2c.h> |
||||
#include <mmc.h> |
||||
#include <asm/types.h> |
||||
#include <asm/io.h> |
||||
#include <asm/errno.h> |
||||
#include <asm/arch/db8500_pincfg.h> |
||||
|
||||
#include "db8500_pins.h" |
||||
|
||||
/*
|
||||
* Get a global data pointer |
||||
*/ |
||||
DECLARE_GLOBAL_DATA_PTR; |
||||
|
||||
/*
|
||||
* Memory controller register |
||||
*/ |
||||
#define DMC_BASE_ADDR 0x80156000 |
||||
#define DMC_CTL_97 (DMC_BASE_ADDR + 0x184) |
||||
|
||||
/*
|
||||
* GPIO pin config common for MOP500/HREF boards |
||||
*/ |
||||
unsigned long gpio_cfg_common[] = { |
||||
/* I2C */ |
||||
GPIO147_I2C0_SCL, |
||||
GPIO148_I2C0_SDA, |
||||
GPIO16_I2C1_SCL, |
||||
GPIO17_I2C1_SDA, |
||||
GPIO10_I2C2_SDA, |
||||
GPIO11_I2C2_SCL, |
||||
GPIO229_I2C3_SDA, |
||||
GPIO230_I2C3_SCL, |
||||
|
||||
/* SSP0, to AB8500 */ |
||||
GPIO143_SSP0_CLK, |
||||
GPIO144_SSP0_FRM, |
||||
GPIO145_SSP0_RXD | PIN_PULL_DOWN, |
||||
GPIO146_SSP0_TXD, |
||||
|
||||
/* MMC0 (MicroSD card) */ |
||||
GPIO18_MC0_CMDDIR | PIN_OUTPUT_HIGH, |
||||
GPIO19_MC0_DAT0DIR | PIN_OUTPUT_HIGH, |
||||
GPIO20_MC0_DAT2DIR | PIN_OUTPUT_HIGH, |
||||
GPIO21_MC0_DAT31DIR | PIN_OUTPUT_HIGH, |
||||
GPIO22_MC0_FBCLK | PIN_INPUT_NOPULL, |
||||
GPIO23_MC0_CLK | PIN_OUTPUT_LOW, |
||||
GPIO24_MC0_CMD | PIN_INPUT_PULLUP, |
||||
GPIO25_MC0_DAT0 | PIN_INPUT_PULLUP, |
||||
GPIO26_MC0_DAT1 | PIN_INPUT_PULLUP, |
||||
GPIO27_MC0_DAT2 | PIN_INPUT_PULLUP, |
||||
GPIO28_MC0_DAT3 | PIN_INPUT_PULLUP, |
||||
|
||||
/* MMC4 (On-board eMMC) */ |
||||
GPIO197_MC4_DAT3 | PIN_INPUT_PULLUP, |
||||
GPIO198_MC4_DAT2 | PIN_INPUT_PULLUP, |
||||
GPIO199_MC4_DAT1 | PIN_INPUT_PULLUP, |
||||
GPIO200_MC4_DAT0 | PIN_INPUT_PULLUP, |
||||
GPIO201_MC4_CMD | PIN_INPUT_PULLUP, |
||||
GPIO202_MC4_FBCLK | PIN_INPUT_NOPULL, |
||||
GPIO203_MC4_CLK | PIN_OUTPUT_LOW, |
||||
GPIO204_MC4_DAT7 | PIN_INPUT_PULLUP, |
||||
GPIO205_MC4_DAT6 | PIN_INPUT_PULLUP, |
||||
GPIO206_MC4_DAT5 | PIN_INPUT_PULLUP, |
||||
GPIO207_MC4_DAT4 | PIN_INPUT_PULLUP, |
||||
|
||||
/* UART2, console */ |
||||
GPIO29_U2_RXD | PIN_INPUT_PULLUP, |
||||
GPIO30_U2_TXD | PIN_OUTPUT_HIGH, |
||||
GPIO31_U2_CTSn | PIN_INPUT_PULLUP, |
||||
GPIO32_U2_RTSn | PIN_OUTPUT_HIGH, |
||||
|
||||
/*
|
||||
* USB, pin 256-267 USB, Is probably already setup correctly from |
||||
* BootROM/boot stages, but we don't trust that and set it up anyway |
||||
*/ |
||||
GPIO256_USB_NXT, |
||||
GPIO257_USB_STP, |
||||
GPIO258_USB_XCLK, |
||||
GPIO259_USB_DIR, |
||||
GPIO260_USB_DAT7, |
||||
GPIO261_USB_DAT6, |
||||
GPIO262_USB_DAT5, |
||||
GPIO263_USB_DAT4, |
||||
GPIO264_USB_DAT3, |
||||
GPIO265_USB_DAT2, |
||||
GPIO266_USB_DAT1, |
||||
GPIO267_USB_DAT0, |
||||
}; |
||||
|
||||
unsigned long gpio_cfg_snowball[] = { |
||||
/* MMC0 (MicroSD card) */ |
||||
GPIO217_GPIO | PIN_OUTPUT_HIGH, /* MMC_EN */ |
||||
GPIO218_GPIO | PIN_INPUT_NOPULL, /* MMC_CD */ |
||||
GPIO228_GPIO | PIN_OUTPUT_HIGH, /* SD_SEL */ |
||||
|
||||
/* eMMC */ |
||||
GPIO167_GPIO | PIN_OUTPUT_HIGH, /* RSTn_MLC */ |
||||
|
||||
/* LAN */ |
||||
GPIO131_SM_ADQ8, |
||||
GPIO132_SM_ADQ9, |
||||
GPIO133_SM_ADQ10, |
||||
GPIO134_SM_ADQ11, |
||||
GPIO135_SM_ADQ12, |
||||
GPIO136_SM_ADQ13, |
||||
GPIO137_SM_ADQ14, |
||||
GPIO138_SM_ADQ15, |
||||
|
||||
/* RSTn_LAN */ |
||||
GPIO141_GPIO | PIN_OUTPUT_HIGH, |
||||
}; |
||||
|
||||
/*
|
||||
* Miscellaneous platform dependent initialisations |
||||
*/ |
||||
|
||||
int board_init(void) |
||||
{ |
||||
/*
|
||||
* Setup board (bd) and board-info (bi). |
||||
* bi_arch_number: Unique id for this board. It will passed in r1 to |
||||
* Linux startup code and is the machine_id. |
||||
* bi_boot_params: Where this board expects params. |
||||
*/ |
||||
gd->bd->bi_arch_number = MACH_TYPE_SNOWBALL; |
||||
gd->bd->bi_boot_params = 0x00000100; |
||||
|
||||
/* Configure GPIO pins needed by U-boot */ |
||||
db8500_gpio_config_pins(gpio_cfg_common, ARRAY_SIZE(gpio_cfg_common)); |
||||
|
||||
db8500_gpio_config_pins(gpio_cfg_snowball, |
||||
ARRAY_SIZE(gpio_cfg_snowball)); |
||||
|
||||
return 0; |
||||
} |
||||
|
||||
int dram_init(void) |
||||
{ |
||||
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; |
||||
gd->ram_size = gd->bd->bi_dram[0].size = |
||||
get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE); |
||||
|
||||
return 0; |
||||
} |
||||
@ -0,0 +1,221 @@ |
||||
/*
|
||||
* Code ported from Nomadik GPIO driver in ST-Ericsson Linux kernel code. |
||||
* The purpose is that GPIO config found in kernel should work by simply |
||||
* copy-paste it to U-boot. |
||||
* |
||||
* Original Linux authors: |
||||
* Copyright (C) 2008,2009 STMicroelectronics |
||||
* Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> |
||||
* Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com> |
||||
* |
||||
* Ported to U-boot by: |
||||
* Copyright (C) 2010 Joakim Axelsson <joakim.axelsson AT stericsson.com> |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 as |
||||
* published by the Free Software Foundation. |
||||
*/ |
||||
|
||||
#include <common.h> |
||||
#include <asm/io.h> |
||||
|
||||
#include <asm/arch/db8500_gpio.h> |
||||
#include <asm/arch/db8500_pincfg.h> |
||||
#include <linux/compiler.h> |
||||
|
||||
#define IO_ADDR(x) (void *) (x) |
||||
|
||||
/*
|
||||
* The GPIO module in the db8500 Systems-on-Chip is an |
||||
* AMBA device, managing 32 pins and alternate functions. The logic block |
||||
* is currently only used in the db8500. |
||||
*/ |
||||
|
||||
#define GPIO_TOTAL_PINS 268 |
||||
#define GPIO_PINS_PER_BLOCK 32 |
||||
#define GPIO_BLOCKS_COUNT (GPIO_TOTAL_PINS/GPIO_PINS_PER_BLOCK + 1) |
||||
#define GPIO_BLOCK(pin) (((pin + GPIO_PINS_PER_BLOCK) >> 5) - 1) |
||||
#define GPIO_PIN_WITHIN_BLOCK(pin) ((pin)%(GPIO_PINS_PER_BLOCK)) |
||||
|
||||
/* Register in the logic block */ |
||||
#define DB8500_GPIO_DAT 0x00 |
||||
#define DB8500_GPIO_DATS 0x04 |
||||
#define DB8500_GPIO_DATC 0x08 |
||||
#define DB8500_GPIO_PDIS 0x0c |
||||
#define DB8500_GPIO_DIR 0x10 |
||||
#define DB8500_GPIO_DIRS 0x14 |
||||
#define DB8500_GPIO_DIRC 0x18 |
||||
#define DB8500_GPIO_SLPC 0x1c |
||||
#define DB8500_GPIO_AFSLA 0x20 |
||||
#define DB8500_GPIO_AFSLB 0x24 |
||||
|
||||
#define DB8500_GPIO_RIMSC 0x40 |
||||
#define DB8500_GPIO_FIMSC 0x44 |
||||
#define DB8500_GPIO_IS 0x48 |
||||
#define DB8500_GPIO_IC 0x4c |
||||
#define DB8500_GPIO_RWIMSC 0x50 |
||||
#define DB8500_GPIO_FWIMSC 0x54 |
||||
#define DB8500_GPIO_WKS 0x58 |
||||
|
||||
static void __iomem *get_gpio_addr(unsigned gpio) |
||||
{ |
||||
/* Our list of GPIO chips */ |
||||
static void __iomem *gpio_addrs[GPIO_BLOCKS_COUNT] = { |
||||
IO_ADDR(CFG_GPIO_0_BASE), |
||||
IO_ADDR(CFG_GPIO_1_BASE), |
||||
IO_ADDR(CFG_GPIO_2_BASE), |
||||
IO_ADDR(CFG_GPIO_3_BASE), |
||||
IO_ADDR(CFG_GPIO_4_BASE), |
||||
IO_ADDR(CFG_GPIO_5_BASE), |
||||
IO_ADDR(CFG_GPIO_6_BASE), |
||||
IO_ADDR(CFG_GPIO_7_BASE), |
||||
IO_ADDR(CFG_GPIO_8_BASE) |
||||
}; |
||||
|
||||
return gpio_addrs[GPIO_BLOCK(gpio)]; |
||||
} |
||||
|
||||
static unsigned get_gpio_offset(unsigned gpio) |
||||
{ |
||||
return GPIO_PIN_WITHIN_BLOCK(gpio); |
||||
} |
||||
|
||||
/* Can only be called from config_pin. Don't configure alt-mode directly */ |
||||
static void gpio_set_mode(unsigned gpio, enum db8500_gpio_alt mode) |
||||
{ |
||||
void __iomem *addr = get_gpio_addr(gpio); |
||||
unsigned offset = get_gpio_offset(gpio); |
||||
u32 bit = 1 << offset; |
||||
u32 afunc, bfunc; |
||||
|
||||
afunc = readl(addr + DB8500_GPIO_AFSLA) & ~bit; |
||||
bfunc = readl(addr + DB8500_GPIO_AFSLB) & ~bit; |
||||
if (mode & DB8500_GPIO_ALT_A) |
||||
afunc |= bit; |
||||
if (mode & DB8500_GPIO_ALT_B) |
||||
bfunc |= bit; |
||||
writel(afunc, addr + DB8500_GPIO_AFSLA); |
||||
writel(bfunc, addr + DB8500_GPIO_AFSLB); |
||||
} |
||||
|
||||
/**
|
||||
* db8500_gpio_set_pull() - enable/disable pull up/down on a gpio |
||||
* @gpio: pin number |
||||
* @pull: one of DB8500_GPIO_PULL_DOWN, DB8500_GPIO_PULL_UP, |
||||
* and DB8500_GPIO_PULL_NONE |
||||
* |
||||
* Enables/disables pull up/down on a specified pin. This only takes effect if |
||||
* the pin is configured as an input (either explicitly or by the alternate |
||||
* function). |
||||
* |
||||
* NOTE: If enabling the pull up/down, the caller must ensure that the GPIO is |
||||
* configured as an input. Otherwise, due to the way the controller registers |
||||
* work, this function will change the value output on the pin. |
||||
*/ |
||||
void db8500_gpio_set_pull(unsigned gpio, enum db8500_gpio_pull pull) |
||||
{ |
||||
void __iomem *addr = get_gpio_addr(gpio); |
||||
unsigned offset = get_gpio_offset(gpio); |
||||
u32 bit = 1 << offset; |
||||
u32 pdis; |
||||
|
||||
pdis = readl(addr + DB8500_GPIO_PDIS); |
||||
if (pull == DB8500_GPIO_PULL_NONE) |
||||
pdis |= bit; |
||||
else |
||||
pdis &= ~bit; |
||||
writel(pdis, addr + DB8500_GPIO_PDIS); |
||||
|
||||
if (pull == DB8500_GPIO_PULL_UP) |
||||
writel(bit, addr + DB8500_GPIO_DATS); |
||||
else if (pull == DB8500_GPIO_PULL_DOWN) |
||||
writel(bit, addr + DB8500_GPIO_DATC); |
||||
} |
||||
|
||||
void db8500_gpio_make_input(unsigned gpio) |
||||
{ |
||||
void __iomem *addr = get_gpio_addr(gpio); |
||||
unsigned offset = get_gpio_offset(gpio); |
||||
|
||||
writel(1 << offset, addr + DB8500_GPIO_DIRC); |
||||
} |
||||
|
||||
int db8500_gpio_get_input(unsigned gpio) |
||||
{ |
||||
void __iomem *addr = get_gpio_addr(gpio); |
||||
unsigned offset = get_gpio_offset(gpio); |
||||
u32 bit = 1 << offset; |
||||
|
||||
printf("db8500_gpio_get_input gpio=%u addr=%p offset=%u bit=%#x\n", |
||||
gpio, addr, offset, bit); |
||||
|
||||
return (readl(addr + DB8500_GPIO_DAT) & bit) != 0; |
||||
} |
||||
|
||||
void db8500_gpio_make_output(unsigned gpio, int val) |
||||
{ |
||||
void __iomem *addr = get_gpio_addr(gpio); |
||||
unsigned offset = get_gpio_offset(gpio); |
||||
|
||||
writel(1 << offset, addr + DB8500_GPIO_DIRS); |
||||
db8500_gpio_set_output(gpio, val); |
||||
} |
||||
|
||||
void db8500_gpio_set_output(unsigned gpio, int val) |
||||
{ |
||||
void __iomem *addr = get_gpio_addr(gpio); |
||||
unsigned offset = get_gpio_offset(gpio); |
||||
|
||||
if (val) |
||||
writel(1 << offset, addr + DB8500_GPIO_DATS); |
||||
else |
||||
writel(1 << offset, addr + DB8500_GPIO_DATC); |
||||
} |
||||
|
||||
/**
|
||||
* config_pin - configure a pin's mux attributes |
||||
* @cfg: pin confguration |
||||
* |
||||
* Configures a pin's mode (alternate function or GPIO), its pull up status, |
||||
* and its sleep mode based on the specified configuration. The @cfg is |
||||
* usually one of the SoC specific macros defined in mach/<soc>-pins.h. These |
||||
* are constructed using, and can be further enhanced with, the macros in |
||||
* plat/pincfg.h. |
||||
* |
||||
* If a pin's mode is set to GPIO, it is configured as an input to avoid |
||||
* side-effects. The gpio can be manipulated later using standard GPIO API |
||||
* calls. |
||||
*/ |
||||
static void config_pin(unsigned long cfg) |
||||
{ |
||||
int pin = PIN_NUM(cfg); |
||||
int pull = PIN_PULL(cfg); |
||||
int af = PIN_ALT(cfg); |
||||
int output = PIN_DIR(cfg); |
||||
int val = PIN_VAL(cfg); |
||||
|
||||
if (output) |
||||
db8500_gpio_make_output(pin, val); |
||||
else { |
||||
db8500_gpio_make_input(pin); |
||||
db8500_gpio_set_pull(pin, pull); |
||||
} |
||||
|
||||
gpio_set_mode(pin, af); |
||||
} |
||||
|
||||
/**
|
||||
* db8500_config_pins - configure several pins at once |
||||
* @cfgs: array of pin configurations |
||||
* @num: number of elments in the array |
||||
* |
||||
* Configures several pins using config_pin(). Refer to that function for |
||||
* further information. |
||||
*/ |
||||
void db8500_gpio_config_pins(unsigned long *cfgs, size_t num) |
||||
{ |
||||
size_t i; |
||||
|
||||
for (i = 0; i < num; i++) |
||||
config_pin(cfgs[i]); |
||||
} |
||||
@ -0,0 +1,256 @@ |
||||
/*
|
||||
* Copyright (C) ST-Ericsson SA 2009 |
||||
* |
||||
* See file CREDITS for list of people who contributed to this |
||||
* project. |
||||
* |
||||
* This program is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of |
||||
* the License, or (at your option) any later version. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* You should have received a copy of the GNU General Public License |
||||
* along with this program; if not, write to the Free Software |
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
||||
* MA 02111-1307 USA |
||||
*/ |
||||
|
||||
#ifndef __CONFIG_H |
||||
#define __CONFIG_H |
||||
|
||||
/*
|
||||
* #define DEBUG 1 |
||||
*/ |
||||
|
||||
#define CONFIG_SKIP_LOWLEVEL_INIT |
||||
#define CONFIG_SNOWBALL |
||||
#define CONFIG_SYS_ICACHE_OFF |
||||
#define CONFIG_SYS_DCACHE_OFF |
||||
|
||||
/*
|
||||
* High Level Configuration Options |
||||
* (easy to change) |
||||
*/ |
||||
#define CONFIG_U8500 |
||||
#define CONFIG_L2_OFF |
||||
|
||||
#define CONFIG_SYS_MEMTEST_START 0x00000000 |
||||
#define CONFIG_SYS_MEMTEST_END 0x1FFFFFFF |
||||
#define CONFIG_SYS_HZ 1000 /* must be 1000 */ |
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Size of environment and malloc() pool |
||||
*/ |
||||
/*
|
||||
* If you use U-Boot as crash kernel, make sure that it does not overwrite |
||||
* information saved by kexec during panic. Kexec expects the start |
||||
* address of the executable 32K above "crashkernel" address. |
||||
*/ |
||||
/*
|
||||
* Size of malloc() pool |
||||
*/ |
||||
#define CONFIG_ENV_SIZE (8*1024) |
||||
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024) |
||||
|
||||
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* for initial data */ |
||||
|
||||
#define CONFIG_ENV_IS_IN_MMC |
||||
#define CONFIG_CMD_ENV |
||||
#define CONFIG_CMD_SAVEENV |
||||
#define CONFIG_ENV_OFFSET 0x0118000 |
||||
#define CONFIG_SYS_MMC_ENV_DEV 0 /* SLOT2: eMMC */ |
||||
|
||||
/*
|
||||
* PL011 Configuration |
||||
*/ |
||||
#define CONFIG_PL011_SERIAL |
||||
#define CONFIG_PL011_SERIAL_RLCR |
||||
#define CONFIG_PL011_SERIAL_FLUSH_ON_INIT |
||||
|
||||
/*
|
||||
* U8500 UART registers base for 3 serial devices |
||||
*/ |
||||
#define CFG_UART0_BASE 0x80120000 |
||||
#define CFG_UART1_BASE 0x80121000 |
||||
#define CFG_UART2_BASE 0x80007000 |
||||
#define CFG_SERIAL0 CFG_UART0_BASE |
||||
#define CFG_SERIAL1 CFG_UART1_BASE |
||||
#define CFG_SERIAL2 CFG_UART2_BASE |
||||
#define CONFIG_PL011_CLOCK 38400000 |
||||
#define CONFIG_PL01x_PORTS { (void *)CFG_SERIAL0, (void *)CFG_SERIAL1, \ |
||||
(void *)CFG_SERIAL2 } |
||||
#define CONFIG_CONS_INDEX 2 |
||||
#define CONFIG_BAUDRATE 115200 |
||||
|
||||
/*
|
||||
* Devices and file systems |
||||
*/ |
||||
#define CONFIG_MMC |
||||
#define CONFIG_GENERIC_MMC |
||||
#define CONFIG_DOS_PARTITION |
||||
|
||||
/*
|
||||
* Commands |
||||
*/ |
||||
#define CONFIG_CMD_MEMORY |
||||
#define CONFIG_CMD_BOOTD |
||||
#define CONFIG_CMD_BDI |
||||
#define CONFIG_CMD_IMI |
||||
#define CONFIG_CMD_MISC |
||||
#define CONFIG_CMD_RUN |
||||
#define CONFIG_CMD_ECHO |
||||
#define CONFIG_CMD_CONSOLE |
||||
#define CONFIG_CMD_LOADS |
||||
#define CONFIG_CMD_LOADB |
||||
#define CONFIG_CMD_MMC |
||||
#define CONFIG_CMD_FAT |
||||
#define CONFIG_CMD_EXT2 |
||||
#define CONFIG_CMD_SOURCE |
||||
|
||||
#ifndef CONFIG_BOOTDELAY |
||||
#define CONFIG_BOOTDELAY 1 |
||||
#endif |
||||
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ |
||||
|
||||
#undef CONFIG_BOOTARGS |
||||
#define CONFIG_BOOTCOMMAND \ |
||||
"mmc dev 1; " \
|
||||
"if run loadbootscript; " \
|
||||
"then run bootscript; " \
|
||||
"else " \
|
||||
"if run mmcload; " \
|
||||
"then run mmcboot; " \
|
||||
"else " \
|
||||
"mmc dev 0; " \
|
||||
"if run emmcloadbootscript; " \
|
||||
"then run bootscript; " \
|
||||
"else " \
|
||||
"if run emmcload; " \
|
||||
"then run emmcboot; " \
|
||||
"else " \
|
||||
"echo No media to boot from; " \
|
||||
"fi; " \
|
||||
"fi; " \
|
||||
"fi; " \
|
||||
"fi; " |
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \ |
||||
"verify=n\0" \
|
||||
"loadaddr=0x00100000\0" \
|
||||
"console=ttyAMA2,115200n8\0" \
|
||||
"loadbootscript=fatload mmc 1:1 ${loadaddr} boot.scr\0" \
|
||||
"emmcloadbootscript=fatload mmc 0:2 ${loadaddr} boot.scr\0" \
|
||||
"bootscript=echo Running bootscript " \
|
||||
"from mmc ...; source ${loadaddr}\0" \
|
||||
"memargs256=mem=96M@0 mem_modem=32M@96M mem=32M@128M " \
|
||||
"hwmem=22M@160M pmem_hwb=42M@182M mem_mali=32@224M\0" \
|
||||
"memargs512=mem=96M@0 mem_modem=32M@96M hwmem=32M@128M " \
|
||||
"mem=64M@160M mem_mali=32M@224M " \
|
||||
"pmem_hwb=128M@256M mem=128M@384M\0" \
|
||||
"memargs1024=mem=128M@0 mali.mali_mem=32M@128M " \
|
||||
"hwmem=168M@M160M mem=48M@328M " \
|
||||
"mem_issw=1M@383M mem=640M@384M\0" \
|
||||
"memargs=setenv bootargs ${bootargs} ${memargs1024}\0" \
|
||||
"emmcload=fatload mmc 0:2 ${loadaddr} uImage\0" \
|
||||
"mmcload=fatload mmc 1:1 ${loadaddr} uImage\0" \
|
||||
"commonargs=setenv bootargs console=${console} " \
|
||||
"vmalloc=300M\0" \
|
||||
"emmcargs=setenv bootargs ${bootargs} " \
|
||||
"root=/dev/mmcblk0p3 " \
|
||||
"rootwait\0" \
|
||||
"addcons=setenv bootargs ${bootargs} " \
|
||||
"console=${console}\0" \
|
||||
"emmcboot=echo Booting from eMMC ...; " \
|
||||
"run commonargs emmcargs memargs; " \
|
||||
"bootm ${loadaddr}\0" \
|
||||
"mmcargs=setenv bootargs ${bootargs} " \
|
||||
"root=/dev/mmcblk1p2 " \
|
||||
"rootwait earlyprintk\0" \
|
||||
"mmcboot=echo Booting from external MMC ...; " \
|
||||
"run commonargs mmcargs memargs; " \
|
||||
"bootm ${loadaddr}\0" \
|
||||
"fdt_high=0x2BC00000\0" \
|
||||
"stdout=serial,usbtty\0" \
|
||||
"stdin=serial,usbtty\0" \
|
||||
"stderr=serial,usbtty\0" |
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Miscellaneous configurable options |
||||
*/ |
||||
|
||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */ |
||||
#define CONFIG_SYS_PROMPT "U8500 $ " /* Monitor Command Prompt */ |
||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
||||
|
||||
/* Print Buffer Size */ |
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ |
||||
+ sizeof(CONFIG_SYS_PROMPT) + 16) |
||||
#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ |
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */ |
||||
|
||||
#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ |
||||
#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ |
||||
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 |
||||
|
||||
#define CONFIG_SYS_HUSH_PARSER 1 |
||||
#define CONFIG_CMDLINE_EDITING |
||||
|
||||
#define CONFIG_SETUP_MEMORY_TAGS 2 |
||||
#define CONFIG_INITRD_TAG 1 |
||||
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ |
||||
|
||||
/*
|
||||
* Physical Memory Map |
||||
*/ |
||||
#define CONFIG_NR_DRAM_BANKS 1 |
||||
#define PHYS_SDRAM_1 0x00000000 /* DDR-SDRAM Bank #1 */ |
||||
|
||||
/*
|
||||
* additions for new relocation code |
||||
*/ |
||||
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 |
||||
#define CONFIG_SYS_MAX_RAM_SIZE 0x40000000 |
||||
#define CONFIG_SYS_INIT_RAM_SIZE 0x100000 |
||||
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \ |
||||
CONFIG_SYS_INIT_RAM_SIZE - \
|
||||
GENERATED_GBL_DATA_SIZE) |
||||
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET |
||||
|
||||
/* landing address before relocation */ |
||||
#ifndef CONFIG_SYS_TEXT_BASE |
||||
#define CONFIG_SYS_TEXT_BASE 0x0 |
||||
#endif |
||||
|
||||
/*
|
||||
* FLASH and environment organization |
||||
*/ |
||||
#define CONFIG_SYS_NO_FLASH |
||||
|
||||
/*
|
||||
* base register values for U8500 |
||||
*/ |
||||
#define CFG_PRCMU_BASE 0x80157000 /* Power, reset and clock */ |
||||
|
||||
|
||||
/*
|
||||
* U8500 GPIO register base for 9 banks |
||||
*/ |
||||
#define CONFIG_DB8500_GPIO |
||||
#define CFG_GPIO_0_BASE 0x8012E000 |
||||
#define CFG_GPIO_1_BASE 0x8012E080 |
||||
#define CFG_GPIO_2_BASE 0x8000E000 |
||||
#define CFG_GPIO_3_BASE 0x8000E080 |
||||
#define CFG_GPIO_4_BASE 0x8000E100 |
||||
#define CFG_GPIO_5_BASE 0x8000E180 |
||||
#define CFG_GPIO_6_BASE 0x8011E000 |
||||
#define CFG_GPIO_7_BASE 0x8011E080 |
||||
#define CFG_GPIO_8_BASE 0xA03FE000 |
||||
|
||||
#define CFG_FSMC_BASE 0x80000000 /* FSMC Controller */ |
||||
|
||||
#endif /* __CONFIG_H */ |
||||
Loading…
Reference in new issue