ppc4xx: Add basic support for AMCC 460EX/460GT (1/5)

This patch adds basic support for the AMCC 460EX/460GT PPC's.

Signed-off-by: Stefan Roese <sr@denx.de>
master
Stefan Roese 17 years ago
parent 56e4101783
commit 8ac41e3e37
  1. 41
      cpu/ppc4xx/44x_spd_ddr2.c
  2. 369
      cpu/ppc4xx/4xx_enet.c
  3. 9
      cpu/ppc4xx/4xx_pci.c
  4. 203
      cpu/ppc4xx/4xx_pcie.c
  5. 24
      cpu/ppc4xx/4xx_uart.c

@ -42,7 +42,8 @@
#include <asm/mmu.h> #include <asm/mmu.h>
#if defined(CONFIG_SPD_EEPROM) && \ #if defined(CONFIG_SPD_EEPROM) && \
(defined(CONFIG_440SP) || defined(CONFIG_440SPE)) (defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT))
/*-----------------------------------------------------------------------------+ /*-----------------------------------------------------------------------------+
* Defines * Defines
@ -579,6 +580,13 @@ long int initdram(int board_type)
ppc440sp_sdram_register_dump(); ppc440sp_sdram_register_dump();
/*
* Clear potential errors resulting from auto-calibration.
* If not done, then we could get an interrupt later on when
* exceptions are enabled.
*/
set_mcsr(get_mcsr());
return dram_size; return dram_size;
} }
@ -2125,6 +2133,7 @@ static void program_memory_queue(unsigned long *dimm_populated,
unsigned long baseadd_size; unsigned long baseadd_size;
unsigned long i; unsigned long i;
unsigned long bank_0_populated = 0; unsigned long bank_0_populated = 0;
unsigned long total_size = 0;
/*------------------------------------------------------------------ /*------------------------------------------------------------------
* Reset the rank_base_address. * Reset the rank_base_address.
@ -2147,28 +2156,38 @@ static void program_memory_queue(unsigned long *dimm_populated,
* Set the sizes * Set the sizes
*-----------------------------------------------------------------*/ *-----------------------------------------------------------------*/
baseadd_size = 0; baseadd_size = 0;
rank_size_bytes = 4 * 1024 * 1024 * rank_size_id;
switch (rank_size_id) { switch (rank_size_id) {
case 0x01:
baseadd_size |= SDRAM_RXBAS_SDSZ_1024;
total_size = 1024;
break;
case 0x02: case 0x02:
baseadd_size |= SDRAM_RXBAS_SDSZ_8; baseadd_size |= SDRAM_RXBAS_SDSZ_2048;
total_size = 2048;
break; break;
case 0x04: case 0x04:
baseadd_size |= SDRAM_RXBAS_SDSZ_16; baseadd_size |= SDRAM_RXBAS_SDSZ_4096;
total_size = 4096;
break; break;
case 0x08: case 0x08:
baseadd_size |= SDRAM_RXBAS_SDSZ_32; baseadd_size |= SDRAM_RXBAS_SDSZ_32;
total_size = 32;
break; break;
case 0x10: case 0x10:
baseadd_size |= SDRAM_RXBAS_SDSZ_64; baseadd_size |= SDRAM_RXBAS_SDSZ_64;
total_size = 64;
break; break;
case 0x20: case 0x20:
baseadd_size |= SDRAM_RXBAS_SDSZ_128; baseadd_size |= SDRAM_RXBAS_SDSZ_128;
total_size = 128;
break; break;
case 0x40: case 0x40:
baseadd_size |= SDRAM_RXBAS_SDSZ_256; baseadd_size |= SDRAM_RXBAS_SDSZ_256;
total_size = 256;
break; break;
case 0x80: case 0x80:
baseadd_size |= SDRAM_RXBAS_SDSZ_512; baseadd_size |= SDRAM_RXBAS_SDSZ_512;
total_size = 512;
break; break;
default: default:
printf("DDR-SDRAM: DIMM %d memory queue configuration.\n", printf("DDR-SDRAM: DIMM %d memory queue configuration.\n",
@ -2178,6 +2197,7 @@ static void program_memory_queue(unsigned long *dimm_populated,
printf("Replace the DIMM module with a supported DIMM.\n\n"); printf("Replace the DIMM module with a supported DIMM.\n\n");
spd_ddr_init_hang (); spd_ddr_init_hang ();
} }
rank_size_bytes = total_size << 20;
if ((dimm_populated[dimm_num] != SDRAM_NONE) && (dimm_num == 1)) if ((dimm_populated[dimm_num] != SDRAM_NONE) && (dimm_num == 1))
bank_0_populated = 1; bank_0_populated = 1;
@ -2190,6 +2210,19 @@ static void program_memory_queue(unsigned long *dimm_populated,
} }
} }
} }
#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
/*
* Enable high bandwidth access on 460EX/GT.
* This should/could probably be done on other
* PPC's too, like 440SPe.
* This is currently not used, but with this setup
* it is possible to use it later on in e.g. the Linux
* EMAC driver for performance gain.
*/
mtdcr(SDRAM_PLBADDULL, 0x00000000); /* MQ0_BAUL */
mtdcr(SDRAM_PLBADDUHB, 0x00000008); /* MQ0_BAUH */
#endif
} }
/*-----------------------------------------------------------------------------+ /*-----------------------------------------------------------------------------+

@ -137,17 +137,32 @@
#define BI_PHYMODE_RTBI 4 #define BI_PHYMODE_RTBI 4
#define BI_PHYMODE_TBI 5 #define BI_PHYMODE_TBI 5
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_405EX) defined(CONFIG_405EX)
#define BI_PHYMODE_SMII 6 #define BI_PHYMODE_SMII 6
#define BI_PHYMODE_MII 7 #define BI_PHYMODE_MII 7
#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
#define BI_PHYMODE_RMII 8
#endif
#endif #endif
#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ #if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_405EX) defined(CONFIG_405EX)
#define SDR0_MFR_ETH_CLK_SEL_V(n) ((0x01<<27) / (n+1)) #define SDR0_MFR_ETH_CLK_SEL_V(n) ((0x01<<27) / (n+1))
#endif #endif
#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
#define SDR0_ETH_CFG_CLK_SEL_V(n) (0x01 << (8 + n))
#endif
#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
#define MAL_RX_CHAN_MUL 8 /* 460EX/GT uses MAL channel 8 for EMAC1 */
#else
#define MAL_RX_CHAN_MUL 1
#endif
/*-----------------------------------------------------------------------------+ /*-----------------------------------------------------------------------------+
* Global variables. TX and RX descriptors and buffers. * Global variables. TX and RX descriptors and buffers.
*-----------------------------------------------------------------------------*/ *-----------------------------------------------------------------------------*/
@ -214,6 +229,44 @@ extern int emac4xx_miiphy_write (char *devname, unsigned char addr,
int board_emac_count(void); int board_emac_count(void);
static void emac_loopback_enable(EMAC_4XX_HW_PST hw_p)
{
#if defined(CONFIG_440SPE) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_405EX)
u32 val;
mfsdr(sdr_mfr, val);
val |= SDR0_MFR_ETH_CLK_SEL_V(hw_p->devnum);
mtsdr(sdr_mfr, val);
#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
u32 val;
mfsdr(SDR0_ETH_CFG, val);
val |= SDR0_ETH_CFG_CLK_SEL_V(hw_p->devnum);
mtsdr(SDR0_ETH_CFG, val);
#endif
}
static void emac_loopback_disable(EMAC_4XX_HW_PST hw_p)
{
#if defined(CONFIG_440SPE) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_405EX)
u32 val;
mfsdr(sdr_mfr, val);
val &= ~SDR0_MFR_ETH_CLK_SEL_V(hw_p->devnum);
mtsdr(sdr_mfr, val);
#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
u32 val;
mfsdr(SDR0_ETH_CFG, val);
val &= ~SDR0_ETH_CFG_CLK_SEL_V(hw_p->devnum);
mtsdr(SDR0_ETH_CFG, val);
#endif
}
/*-----------------------------------------------------------------------------+ /*-----------------------------------------------------------------------------+
| ppc_4xx_eth_halt | ppc_4xx_eth_halt
| Disable MAL channel, and EMACn | Disable MAL channel, and EMACn
@ -222,11 +275,6 @@ static void ppc_4xx_eth_halt (struct eth_device *dev)
{ {
EMAC_4XX_HW_PST hw_p = dev->priv; EMAC_4XX_HW_PST hw_p = dev->priv;
uint32_t failsafe = 10000; uint32_t failsafe = 10000;
#if defined(CONFIG_440SPE) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_405EX)
unsigned long mfr;
#endif
out_be32((void *)EMAC_IER + hw_p->hw_addr, 0x00000000); /* disable emac interrupts */ out_be32((void *)EMAC_IER + hw_p->hw_addr, 0x00000000); /* disable emac interrupts */
@ -247,27 +295,14 @@ static void ppc_4xx_eth_halt (struct eth_device *dev)
break; break;
} }
/* EMAC RESET */
#if defined(CONFIG_440SPE) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_405EX)
/* provide clocks for EMAC internal loopback */ /* provide clocks for EMAC internal loopback */
mfsdr (sdr_mfr, mfr); emac_loopback_enable(hw_p);
mfr |= SDR0_MFR_ETH_CLK_SEL_V(hw_p->devnum);
mtsdr(sdr_mfr, mfr);
#endif
/* EMAC RESET */
out_be32((void *)EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST); out_be32((void *)EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST);
#if defined(CONFIG_440SPE) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_405EX)
/* remove clocks for EMAC internal loopback */ /* remove clocks for EMAC internal loopback */
mfsdr (sdr_mfr, mfr); emac_loopback_disable(hw_p);
mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(hw_p->devnum);
mtsdr(sdr_mfr, mfr);
#endif
#ifndef CONFIG_NETCONSOLE #ifndef CONFIG_NETCONSOLE
hw_p->print_speed = 1; /* print speed message again next time */ hw_p->print_speed = 1; /* print speed message again next time */
@ -452,6 +487,187 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
} }
#endif /* CONFIG_405EX */ #endif /* CONFIG_405EX */
#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
{
u32 eth_cfg;
u32 zmiifer; /* ZMII0_FER reg. */
u32 rmiifer; /* RGMII0_FER reg. Bridge 0 */
u32 rmiifer1; /* RGMII0_FER reg. Bridge 1 */
zmiifer = 0;
rmiifer = 0;
rmiifer1 = 0;
/* TODO:
* NOTE: 460GT has 2 RGMII bridge cores:
* emac0 ------ RGMII0_BASE
* |
* emac1 -----+
*
* emac2 ------ RGMII1_BASE
* |
* emac3 -----+
*
* 460EX has 1 RGMII bridge core:
* and RGMII1_BASE is disabled
* emac0 ------ RGMII0_BASE
* |
* emac1 -----+
*/
/*
* Right now only 2*RGMII is supported. Please extend when needed.
* sr - 2008-02-19
*/
switch (9) {
case 1:
/* 1 MII - 460EX */
/* GMC0 EMAC4_0, ZMII Bridge */
zmiifer |= ZMII_FER_MII << ZMII_FER_V(0);
bis->bi_phymode[0] = BI_PHYMODE_MII;
bis->bi_phymode[1] = BI_PHYMODE_NONE;
bis->bi_phymode[2] = BI_PHYMODE_NONE;
bis->bi_phymode[3] = BI_PHYMODE_NONE;
break;
case 2:
/* 2 MII - 460GT */
/* GMC0 EMAC4_0, GMC1 EMAC4_2, ZMII Bridge */
zmiifer |= ZMII_FER_MII << ZMII_FER_V(0);
zmiifer |= ZMII_FER_MII << ZMII_FER_V(2);
bis->bi_phymode[0] = BI_PHYMODE_MII;
bis->bi_phymode[1] = BI_PHYMODE_NONE;
bis->bi_phymode[2] = BI_PHYMODE_MII;
bis->bi_phymode[3] = BI_PHYMODE_NONE;
break;
case 3:
/* 2 RMII - 460EX */
/* GMC0 EMAC4_0, GMC0 EMAC4_1, ZMII Bridge */
zmiifer |= ZMII_FER_RMII << ZMII_FER_V(0);
zmiifer |= ZMII_FER_RMII << ZMII_FER_V(1);
bis->bi_phymode[0] = BI_PHYMODE_RMII;
bis->bi_phymode[1] = BI_PHYMODE_RMII;
bis->bi_phymode[2] = BI_PHYMODE_NONE;
bis->bi_phymode[3] = BI_PHYMODE_NONE;
break;
case 4:
/* 4 RMII - 460GT */
/* GMC0 EMAC4_0, GMC0 EMAC4_1, GMC1 EMAC4_2, GMC1, EMAC4_3 */
/* ZMII Bridge */
zmiifer |= ZMII_FER_RMII << ZMII_FER_V(0);
zmiifer |= ZMII_FER_RMII << ZMII_FER_V(1);
zmiifer |= ZMII_FER_RMII << ZMII_FER_V(2);
zmiifer |= ZMII_FER_RMII << ZMII_FER_V(3);
bis->bi_phymode[0] = BI_PHYMODE_RMII;
bis->bi_phymode[1] = BI_PHYMODE_RMII;
bis->bi_phymode[2] = BI_PHYMODE_RMII;
bis->bi_phymode[3] = BI_PHYMODE_RMII;
break;
case 5:
/* 2 SMII - 460EX */
/* GMC0 EMAC4_0, GMC0 EMAC4_1, ZMII Bridge */
zmiifer |= ZMII_FER_SMII << ZMII_FER_V(0);
zmiifer |= ZMII_FER_SMII << ZMII_FER_V(1);
bis->bi_phymode[0] = BI_PHYMODE_SMII;
bis->bi_phymode[1] = BI_PHYMODE_SMII;
bis->bi_phymode[2] = BI_PHYMODE_NONE;
bis->bi_phymode[3] = BI_PHYMODE_NONE;
break;
case 6:
/* 4 SMII - 460GT */
/* GMC0 EMAC4_0, GMC0 EMAC4_1, GMC0 EMAC4_3, GMC0 EMAC4_3 */
/* ZMII Bridge */
zmiifer |= ZMII_FER_SMII << ZMII_FER_V(0);
zmiifer |= ZMII_FER_SMII << ZMII_FER_V(1);
zmiifer |= ZMII_FER_SMII << ZMII_FER_V(2);
zmiifer |= ZMII_FER_SMII << ZMII_FER_V(3);
bis->bi_phymode[0] = BI_PHYMODE_SMII;
bis->bi_phymode[1] = BI_PHYMODE_SMII;
bis->bi_phymode[2] = BI_PHYMODE_SMII;
bis->bi_phymode[3] = BI_PHYMODE_SMII;
break;
case 7:
/* This is the default mode that we want for board bringup - Maple */
/* 1 GMII - 460EX */
/* GMC0 EMAC4_0, RGMII Bridge 0 */
rmiifer |= RGMII_FER_MDIO(0);
if (devnum == 0) {
rmiifer |= RGMII_FER_GMII << RGMII_FER_V(2); /* CH0CFG - EMAC0 */
bis->bi_phymode[0] = BI_PHYMODE_GMII;
bis->bi_phymode[1] = BI_PHYMODE_NONE;
bis->bi_phymode[2] = BI_PHYMODE_NONE;
bis->bi_phymode[3] = BI_PHYMODE_NONE;
} else {
rmiifer |= RGMII_FER_GMII << RGMII_FER_V(3); /* CH1CFG - EMAC1 */
bis->bi_phymode[0] = BI_PHYMODE_NONE;
bis->bi_phymode[1] = BI_PHYMODE_GMII;
bis->bi_phymode[2] = BI_PHYMODE_NONE;
bis->bi_phymode[3] = BI_PHYMODE_NONE;
}
break;
case 8:
/* 2 GMII - 460GT */
/* GMC0 EMAC4_0, RGMII Bridge 0 */
/* GMC1 EMAC4_2, RGMII Bridge 1 */
rmiifer |= RGMII_FER_GMII << RGMII_FER_V(2); /* CH0CFG - EMAC0 */
rmiifer1 |= RGMII_FER_GMII << RGMII_FER_V(2); /* CH0CFG - EMAC2 */
rmiifer |= RGMII_FER_MDIO(0); /* enable MDIO - EMAC0 */
rmiifer1 |= RGMII_FER_MDIO(0); /* enable MDIO - EMAC2 */
bis->bi_phymode[0] = BI_PHYMODE_GMII;
bis->bi_phymode[1] = BI_PHYMODE_NONE;
bis->bi_phymode[2] = BI_PHYMODE_GMII;
bis->bi_phymode[3] = BI_PHYMODE_NONE;
break;
case 9:
/* 2 RGMII - 460EX */
/* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */
rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(2);
rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(3);
rmiifer |= RGMII_FER_MDIO(0); /* enable MDIO - EMAC0 */
bis->bi_phymode[0] = BI_PHYMODE_RGMII;
bis->bi_phymode[1] = BI_PHYMODE_RGMII;
bis->bi_phymode[2] = BI_PHYMODE_NONE;
bis->bi_phymode[3] = BI_PHYMODE_NONE;
break;
case 10:
/* 4 RGMII - 460GT */
/* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */
/* GMC1 EMAC4_2, GMC1 EMAC4_3, RGMII Bridge 1 */
rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(2);
rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(3);
rmiifer1 |= RGMII_FER_RGMII << RGMII_FER_V(2);
rmiifer1 |= RGMII_FER_RGMII << RGMII_FER_V(3);
bis->bi_phymode[0] = BI_PHYMODE_RGMII;
bis->bi_phymode[1] = BI_PHYMODE_RGMII;
bis->bi_phymode[2] = BI_PHYMODE_RGMII;
bis->bi_phymode[3] = BI_PHYMODE_RGMII;
break;
default:
break;
}
/* Set EMAC for MDIO */
mfsdr(SDR0_ETH_CFG, eth_cfg);
eth_cfg |= SDR0_ETH_CFG_MDIO_SEL_EMAC0;
mtsdr(SDR0_ETH_CFG, eth_cfg);
out_be32((void *)RGMII_FER, rmiifer);
#if defined(CONFIG_460GT)
out_be32((void *)RGMII_FER + RGMII1_BASE_OFFSET, rmiifer1);
#endif
/* bypass the TAHOE0/TAHOE1 cores for U-Boot */
mfsdr(SDR0_ETH_CFG, eth_cfg);
eth_cfg |= (SDR0_ETH_CFG_TAHOE0_BYPASS | SDR0_ETH_CFG_TAHOE1_BYPASS);
mtsdr(SDR0_ETH_CFG, eth_cfg);
return 0;
}
#endif /* CONFIG_460EX || CONFIG_460GT */
static inline void *malloc_aligned(u32 size, u32 align) static inline void *malloc_aligned(u32 size, u32 align)
{ {
return (void *)(((u32)malloc(size + align) + align - 1) & return (void *)(((u32)malloc(size + align) + align - 1) &
@ -472,19 +688,16 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
#if defined(CONFIG_440GX) || \ #if defined(CONFIG_440GX) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_405EX) defined(CONFIG_405EX)
sys_info_t sysinfo; sys_info_t sysinfo;
#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \ #if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_405EX) defined(CONFIG_405EX)
int ethgroup = -1; int ethgroup = -1;
#endif #endif
#endif #endif
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
defined(CONFIG_405EX)
unsigned long mfr;
#endif
u32 bd_cached; u32 bd_cached;
u32 bd_uncached = 0; u32 bd_uncached = 0;
#ifdef CONFIG_4xx_DCACHE #ifdef CONFIG_4xx_DCACHE
@ -503,6 +716,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
#if defined(CONFIG_440GX) || \ #if defined(CONFIG_440GX) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_405EX) defined(CONFIG_405EX)
/* Need to get the OPB frequency so we can access the PHY */ /* Need to get the OPB frequency so we can access the PHY */
get_sys_info (&sysinfo); get_sys_info (&sysinfo);
@ -556,21 +770,12 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
out_be32((void *)ZMII_FER, 0); out_be32((void *)ZMII_FER, 0);
udelay (100); udelay (100);
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) #if defined(CONFIG_440GP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
out_be32((void *)ZMII_FER, (ZMII_FER_RMII | ZMII_FER_MDI) << ZMII_FER_V (devnum)); out_be32((void *)ZMII_FER, (ZMII_FER_RMII | ZMII_FER_MDI) << ZMII_FER_V (devnum));
#elif defined(CONFIG_440GX) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #elif defined(CONFIG_440GX) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT)
ethgroup = ppc_4xx_eth_setup_bridge(devnum, bis); ethgroup = ppc_4xx_eth_setup_bridge(devnum, bis);
#elif defined(CONFIG_440GP)
/* set RMII mode */
out_be32((void *)ZMII_FER, ZMII_RMII | ZMII_MDI0);
#else
if ((devnum == 0) || (devnum == 1)) {
out_be32((void *)ZMII_FER, (ZMII_FER_SMII | ZMII_FER_MDI) << ZMII_FER_V (devnum));
} else { /* ((devnum == 2) || (devnum == 3)) */
out_be32((void *)ZMII_FER, ZMII_FER_MDI << ZMII_FER_V (devnum));
out_be32((void *)RGMII_FER, ((RGMII_FER_RGMII << RGMII_FER_V (2)) |
(RGMII_FER_RGMII << RGMII_FER_V (3))));
}
#endif #endif
out_be32((void *)ZMII_SSR, ZMII_SSR_SP << ZMII_SSR_V(devnum)); out_be32((void *)ZMII_SSR, ZMII_SSR_SP << ZMII_SSR_V(devnum));
@ -579,20 +784,17 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
ethgroup = ppc_4xx_eth_setup_bridge(devnum, bis); ethgroup = ppc_4xx_eth_setup_bridge(devnum, bis);
#endif #endif
__asm__ volatile ("eieio"); sync();
/* reset emac so we have access to the phy */
#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_405EX)
/* provide clocks for EMAC internal loopback */ /* provide clocks for EMAC internal loopback */
mfsdr (sdr_mfr, mfr); emac_loopback_enable(hw_p);
mfr |= SDR0_MFR_ETH_CLK_SEL_V(devnum);
mtsdr(sdr_mfr, mfr);
#endif
/* EMAC RESET */
out_be32((void *)EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST); out_be32((void *)EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST);
/* remove clocks for EMAC internal loopback */
emac_loopback_disable(hw_p);
failsafe = 1000; failsafe = 1000;
while ((in_be32((void *)EMAC_M0 + hw_p->hw_addr) & (EMAC_M0_SRST)) && failsafe) { while ((in_be32((void *)EMAC_M0 + hw_p->hw_addr) & (EMAC_M0_SRST)) && failsafe) {
udelay (1000); udelay (1000);
@ -601,18 +803,10 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
if (failsafe <= 0) if (failsafe <= 0)
printf("\nProblem resetting EMAC!\n"); printf("\nProblem resetting EMAC!\n");
#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_405EX)
/* remove clocks for EMAC internal loopback */
mfsdr (sdr_mfr, mfr);
mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(devnum);
mtsdr(sdr_mfr, mfr);
#endif
#if defined(CONFIG_440GX) || \ #if defined(CONFIG_440GX) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_405EX) defined(CONFIG_405EX)
/* Whack the M1 register */ /* Whack the M1 register */
mode_reg = 0x0; mode_reg = 0x0;
@ -674,6 +868,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
#if defined(CONFIG_440GX) || \ #if defined(CONFIG_440GX) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_405EX) defined(CONFIG_405EX)
#if defined(CONFIG_CIS8201_PHY) #if defined(CONFIG_CIS8201_PHY)
@ -772,8 +967,10 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
hw_p->devnum); hw_p->devnum);
} }
#if defined(CONFIG_440) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \ #if defined(CONFIG_440) && \
!defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
!defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) && \
!defined(CONFIG_460EX) && !defined(CONFIG_460GT)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) #if defined(CONFIG_440EP) || defined(CONFIG_440GR)
mfsdr(sdr_mfr, reg); mfsdr(sdr_mfr, reg);
if (speed == 100) { if (speed == 100) {
@ -807,6 +1004,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
#endif /* defined(CONFIG_440) && !defined(CONFIG_440SP) */ #endif /* defined(CONFIG_440) && !defined(CONFIG_440SP) */
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_405EX) defined(CONFIG_405EX)
if (speed == 1000) if (speed == 1000)
reg = (RGMII_SSR_SP_1000MBPS << RGMII_SSR_V (devnum)); reg = (RGMII_SSR_SP_1000MBPS << RGMII_SSR_V (devnum));
@ -819,12 +1017,17 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
return -1; return -1;
} }
out_be32((void *)RGMII_SSR, reg); out_be32((void *)RGMII_SSR, reg);
#if defined(CONFIG_460GT)
if ((devnum == 2) || (devnum == 3))
out_be32((void *)RGMII_SSR + RGMII1_BASE_OFFSET, reg);
#endif
#endif #endif
/* set the Mal configuration reg */ /* set the Mal configuration reg */
#if defined(CONFIG_440GX) || \ #if defined(CONFIG_440GX) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_405EX) defined(CONFIG_405EX)
mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA |
MAL_CR_PLBLT_DEFAULT | MAL_CR_EOPIE | 0x00330000); MAL_CR_PLBLT_DEFAULT | MAL_CR_EOPIE | 0x00330000);
@ -926,9 +1129,16 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
mtdcr (maltxbattr, 0x0); mtdcr (maltxbattr, 0x0);
mtdcr (malrxbattr, 0x0); mtdcr (malrxbattr, 0x0);
#endif #endif
#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
mtdcr (malrxctp8r, hw_p->rx);
/* set RX buffer size */
mtdcr (malrcbs8, ENET_MAX_MTU_ALIGNED / 16);
#else
mtdcr (malrxctp1r, hw_p->rx_phys); mtdcr (malrxctp1r, hw_p->rx_phys);
/* set RX buffer size */ /* set RX buffer size */
mtdcr (malrcbs1, ENET_MAX_MTU_ALIGNED / 16); mtdcr (malrcbs1, ENET_MAX_MTU_ALIGNED / 16);
#endif
break; break;
#if defined (CONFIG_440GX) #if defined (CONFIG_440GX)
case 2: case 2:
@ -1087,7 +1297,7 @@ static int ppc_4xx_eth_send (struct eth_device *dev, volatile void *ptr,
hw_p->tx[hw_p->tx_slot].data_len = (short) len; hw_p->tx[hw_p->tx_slot].data_len = (short) len;
hw_p->tx[hw_p->tx_slot].ctrl |= MAL_TX_CTRL_READY; hw_p->tx[hw_p->tx_slot].ctrl |= MAL_TX_CTRL_READY;
__asm__ volatile ("eieio"); sync();
out_be32((void *)EMAC_TXM0 + hw_p->hw_addr, out_be32((void *)EMAC_TXM0 + hw_p->hw_addr,
in_be32((void *)EMAC_TXM0 + hw_p->hw_addr) | EMAC_TXM0_GNP0); in_be32((void *)EMAC_TXM0 + hw_p->hw_addr) | EMAC_TXM0_GNP0);
@ -1127,15 +1337,31 @@ static int ppc_4xx_eth_send (struct eth_device *dev, volatile void *ptr,
*/ */
#define UIC0MSR uic1msr #define UIC0MSR uic1msr
#define UIC0SR uic1sr #define UIC0SR uic1sr
#define UIC1MSR uic1msr
#define UIC1SR uic1sr
#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
/*
* Hack: On 460EX/GT all enet irq sources are located on UIC2
* Needs some cleanup. --ag
*/
#define UIC0MSR uic2msr
#define UIC0SR uic2sr
#define UIC1MSR uic2msr
#define UIC1SR uic2sr
#else #else
#define UIC0MSR uic0msr #define UIC0MSR uic0msr
#define UIC0SR uic0sr #define UIC0SR uic0sr
#define UIC1MSR uic1msr
#define UIC1SR uic1sr
#endif #endif
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_405EX) defined(CONFIG_405EX)
#define UICMSR_ETHX uic0msr #define UICMSR_ETHX uic0msr
#define UICSR_ETHX uic0sr #define UICSR_ETHX uic0sr
#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
#define UICMSR_ETHX uic2msr
#define UICSR_ETHX uic2sr
#else #else
#define UICMSR_ETHX uic1msr #define UICMSR_ETHX uic1msr
#define UICSR_ETHX uic1sr #define UICSR_ETHX uic1sr
@ -1173,7 +1399,7 @@ int enetInt (struct eth_device *dev)
serviced = 0; serviced = 0;
my_uic0msr = mfdcr (UIC0MSR); my_uic0msr = mfdcr (UIC0MSR);
my_uic1msr = mfdcr (uic1msr); my_uic1msr = mfdcr (UIC1MSR);
#if defined(CONFIG_440GX) #if defined(CONFIG_440GX)
my_uic2msr = mfdcr (uic2msr); my_uic2msr = mfdcr (uic2msr);
#endif #endif
@ -1219,7 +1445,7 @@ int enetInt (struct eth_device *dev)
if ((hw_p->emac_ier & emac_isr) if ((hw_p->emac_ier & emac_isr)
|| (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) { || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */ mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */
mtdcr (uic1sr, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */ mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
mtdcr (UICSR_ETHX, UIC_ETH0); /* Clear */ mtdcr (UICSR_ETHX, UIC_ETH0); /* Clear */
return (rc); /* we had errors so get out */ return (rc); /* we had errors so get out */
} }
@ -1238,7 +1464,7 @@ int enetInt (struct eth_device *dev)
if ((hw_p->emac_ier & emac_isr) if ((hw_p->emac_ier & emac_isr)
|| (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) { || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */ mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */
mtdcr (uic1sr, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */ mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
mtdcr (UICSR_ETHX, UIC_ETH1); /* Clear */ mtdcr (UICSR_ETHX, UIC_ETH1); /* Clear */
return (rc); /* we had errors so get out */ return (rc); /* we had errors so get out */
} }
@ -1256,7 +1482,7 @@ int enetInt (struct eth_device *dev)
if ((hw_p->emac_ier & emac_isr) if ((hw_p->emac_ier & emac_isr)
|| (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) { || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */ mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */
mtdcr (uic1sr, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */ mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
mtdcr (uic2sr, UIC_ETH2); mtdcr (uic2sr, UIC_ETH2);
return (rc); /* we had errors so get out */ return (rc); /* we had errors so get out */
} }
@ -1274,7 +1500,7 @@ int enetInt (struct eth_device *dev)
if ((hw_p->emac_ier & emac_isr) if ((hw_p->emac_ier & emac_isr)
|| (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) { || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */ mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */
mtdcr (uic1sr, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */ mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
mtdcr (uic2sr, UIC_ETH3); mtdcr (uic2sr, UIC_ETH3);
return (rc); /* we had errors so get out */ return (rc); /* we had errors so get out */
} }
@ -1292,7 +1518,9 @@ int enetInt (struct eth_device *dev)
/* check for EOB on valid channels */ /* check for EOB on valid channels */
if (my_uic0msr & UIC_MRE) { if (my_uic0msr & UIC_MRE) {
mal_rx_eob = mfdcr (malrxeobisr); mal_rx_eob = mfdcr (malrxeobisr);
if ((mal_rx_eob & (0x80000000 >> hw_p->devnum)) != 0) { /* call emac routine for channel x */ if ((mal_rx_eob &
(0x80000000 >> (hw_p->devnum * MAL_RX_CHAN_MUL)))
!= 0) { /* call emac routine for channel x */
/* clear EOB /* clear EOB
mtdcr(malrxeobisr, mal_rx_eob); */ mtdcr(malrxeobisr, mal_rx_eob); */
enet_rcv (dev, emac_isr); enet_rcv (dev, emac_isr);
@ -1303,7 +1531,7 @@ int enetInt (struct eth_device *dev)
} }
mtdcr (UIC0SR, UIC_MRE); /* Clear */ mtdcr (UIC0SR, UIC_MRE); /* Clear */
mtdcr (uic1sr, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */ mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
switch (hw_p->devnum) { switch (hw_p->devnum) {
case 0: case 0:
mtdcr (UICSR_ETHX, UIC_ETH0); mtdcr (UICSR_ETHX, UIC_ETH0);
@ -1468,7 +1696,7 @@ static void enet_rcv (struct eth_device *dev, unsigned long malisr)
int loop_count = 0; int loop_count = 0;
rx_eob_isr = mfdcr (malrxeobisr); rx_eob_isr = mfdcr (malrxeobisr);
if ((0x80000000 >> hw_p->devnum) & rx_eob_isr) { if ((0x80000000 >> (hw_p->devnum * MAL_RX_CHAN_MUL)) & rx_eob_isr) {
/* clear EOB */ /* clear EOB */
mtdcr (malrxeobisr, rx_eob_isr); mtdcr (malrxeobisr, rx_eob_isr);
@ -1482,7 +1710,7 @@ static void enet_rcv (struct eth_device *dev, unsigned long malisr)
loop_count++; loop_count++;
handled++; handled++;
data_len = (unsigned long) hw_p->rx[i].data_len; /* Get len */ data_len = (unsigned long) hw_p->rx[i].data_len & 0x0fff; /* Get len */
if (data_len) { if (data_len) {
if (data_len > ENET_MAX_MTU) /* Check len */ if (data_len > ENET_MAX_MTU) /* Check len */
data_len = 0; data_len = 0;
@ -1568,7 +1796,7 @@ static int ppc_4xx_eth_rx (struct eth_device *dev)
msr = mfmsr (); msr = mfmsr ();
mtmsr (msr & ~(MSR_EE)); mtmsr (msr & ~(MSR_EE));
length = hw_p->rx[user_index].data_len; length = hw_p->rx[user_index].data_len & 0x0fff;
/* Pass the packet up to the protocol layers. */ /* Pass the packet up to the protocol layers. */
/* NetReceive(NetRxPackets[rxIdx], length - 4); */ /* NetReceive(NetRxPackets[rxIdx], length - 4); */
@ -1718,6 +1946,7 @@ int ppc_4xx_eth_initialize (bd_t * bis)
/* set the MAL IER ??? names may change with new spec ??? */ /* set the MAL IER ??? names may change with new spec ??? */
#if defined(CONFIG_440SPE) || \ #if defined(CONFIG_440SPE) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_405EX) defined(CONFIG_405EX)
mal_ier = mal_ier =
MAL_IER_PT | MAL_IER_PRE | MAL_IER_PWE | MAL_IER_PT | MAL_IER_PRE | MAL_IER_PWE |

@ -531,7 +531,8 @@ int pci_440_init (struct pci_controller *hose)
out16r( PCIX0_CLS, 0x00060000 ); /* Bridge, host bridge */ out16r( PCIX0_CLS, 0x00060000 ); /* Bridge, host bridge */
#endif #endif
#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) #if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT)
out32r( PCIX0_BRDGOPT1, 0x04000060 ); /* PLB Rq pri highest */ out32r( PCIX0_BRDGOPT1, 0x04000060 ); /* PLB Rq pri highest */
out32r( PCIX0_BRDGOPT2, in32(PCIX0_BRDGOPT2) | 0x83 ); /* Enable host config, clear Timeout, ensure int src1 */ out32r( PCIX0_BRDGOPT2, in32(PCIX0_BRDGOPT2) | 0x83 ); /* Enable host config, clear Timeout, ensure int src1 */
#elif defined(PCIX0_BRDGOPT1) #elif defined(PCIX0_BRDGOPT1)
@ -549,7 +550,8 @@ int pci_440_init (struct pci_controller *hose)
out32r( PCIX0_POM0SA, 0 ); /* disable */ out32r( PCIX0_POM0SA, 0 ); /* disable */
out32r( PCIX0_POM1SA, 0 ); /* disable */ out32r( PCIX0_POM1SA, 0 ); /* disable */
out32r( PCIX0_POM2SA, 0 ); /* disable */ out32r( PCIX0_POM2SA, 0 ); /* disable */
#if defined(CONFIG_440SPE) #if defined(CONFIG_440SPE) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT)
out32r( PCIX0_POM0LAL, 0x10000000 ); out32r( PCIX0_POM0LAL, 0x10000000 );
out32r( PCIX0_POM0LAH, 0x0000000c ); out32r( PCIX0_POM0LAH, 0x0000000c );
#else #else
@ -586,7 +588,8 @@ void pci_init_board(void)
int busno; int busno;
busno = pci_440_init (&ppc440_hose); busno = pci_440_init (&ppc440_hose);
#if defined(CONFIG_440SPE) #if defined(CONFIG_440SPE) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT)
pcie_setup_hoses(busno + 1); pcie_setup_hoses(busno + 1);
#endif #endif
} }

@ -1,5 +1,5 @@
/* /*
* (C) Copyright 2006 - 2007 * (C) Copyright 2006 - 2008
* Wolfgang Denk, DENX Software Engineering, wd@denx.de. * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
* *
* Copyright (c) 2005 Cisco Systems. All rights reserved. * Copyright (c) 2005 Cisco Systems. All rights reserved.
@ -31,7 +31,8 @@
#include <common.h> #include <common.h>
#include <pci.h> #include <pci.h>
#if (defined(CONFIG_440SPE) || defined(CONFIG_405EX)) && \ #if (defined(CONFIG_440SPE) || defined(CONFIG_405EX) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT)) && \
defined(CONFIG_PCI) defined(CONFIG_PCI)
#include <asm/4xx_pcie.h> #include <asm/4xx_pcie.h>
@ -306,9 +307,8 @@ static int check_error(void)
int err = 0; int err = 0;
/* SDR0_PEGPLLLCT1 reset */ /* SDR0_PEGPLLLCT1 reset */
if (!(valPE0 = SDR_READ(PESDR0_PLLLCT1) & 0x01000000)) { if (!(valPE0 = SDR_READ(PESDR0_PLLLCT1) & 0x01000000))
printf("PCIE: SDR0_PEGPLLLCT1 reset error 0x%x\n", valPE0); printf("PCIE: SDR0_PEGPLLLCT1 reset error 0x%x\n", valPE0);
}
valPE0 = SDR_READ(PESDR0_RCSSET); valPE0 = SDR_READ(PESDR0_RCSSET);
valPE1 = SDR_READ(PESDR1_RCSSET); valPE1 = SDR_READ(PESDR1_RCSSET);
@ -400,7 +400,108 @@ int ppc4xx_init_pcie(void)
} }
return 0; return 0;
} }
#else #endif
#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
static void ppc4xx_setup_utl(u32 port)
{
volatile void *utl_base = NULL;
/*
* Map UTL registers at 0x0801_n000 (4K 0xfff mask) PEGPLn_REGMSK
*/
switch (port) {
case 0:
mtdcr(DCRN_PEGPL_REGBAH(PCIE0), U64_TO_U32_HIGH(CFG_PCIE0_UTLBASE));
mtdcr(DCRN_PEGPL_REGBAL(PCIE0), U64_TO_U32_LOW(CFG_PCIE0_UTLBASE));
mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001); /* BAM 11100000=4KB */
mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0);
break;
case 1:
mtdcr(DCRN_PEGPL_REGBAH(PCIE1), U64_TO_U32_HIGH(CFG_PCIE0_UTLBASE));
mtdcr(DCRN_PEGPL_REGBAL(PCIE1), U64_TO_U32_LOW(CFG_PCIE0_UTLBASE)
+ 0x1000);
mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001); /* BAM 11100000=4KB */
mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0);
break;
}
utl_base = (unsigned int *)(CFG_PCIE_BASE + 0x1000 * port);
/*
* Set buffer allocations and then assert VRB and TXE.
*/
out_be32(utl_base + PEUTL_PBCTL, 0x0800000c); /* PLBME, CRRE */
out_be32(utl_base + PEUTL_OUTTR, 0x08000000);
out_be32(utl_base + PEUTL_INTR, 0x02000000);
out_be32(utl_base + PEUTL_OPDBSZ, 0x04000000); /* OPD = 512 Bytes */
out_be32(utl_base + PEUTL_PBBSZ, 0x00000000); /* Max 512 Bytes */
out_be32(utl_base + PEUTL_IPHBSZ, 0x02000000);
out_be32(utl_base + PEUTL_IPDBSZ, 0x04000000); /* IPD = 512 Bytes */
out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
out_be32(utl_base + PEUTL_PCTL, 0x80800066); /* VRB,TXE,timeout=default */
}
/*
* TODO: double check PCI express SDR based on the latest user manual
* Some registers specified here no longer exist.. has to be
* updated based on the final EAS spec.
*/
static int check_error(void)
{
u32 valPE0, valPE1;
int err = 0;
valPE0 = SDR_READ(SDRN_PESDR_RCSSET(0));
valPE1 = SDR_READ(SDRN_PESDR_RCSSET(1));
/* SDR0_PExRCSSET rstgu */
if (!(valPE0 & PESDRx_RCSSET_RSTGU) || !(valPE1 & PESDRx_RCSSET_RSTGU)) {
printf("PCIE: SDR0_PExRCSSET rstgu error\n");
err = -1;
}
/* SDR0_PExRCSSET rstdl */
if (!(valPE0 & PESDRx_RCSSET_RSTDL) || !(valPE1 & PESDRx_RCSSET_RSTDL)) {
printf("PCIE: SDR0_PExRCSSET rstdl error\n");
err = -1;
}
/* SDR0_PExRCSSET rstpyn */
if ((valPE0 & PESDRx_RCSSET_RSTPYN) || (valPE1 & PESDRx_RCSSET_RSTPYN)) {
printf("PCIE: SDR0_PExRCSSET rstpyn error\n");
err = -1;
}
/* SDR0_PExRCSSET hldplb */
if ((valPE0 & PESDRx_RCSSET_HLDPLB) || (valPE1 & PESDRx_RCSSET_HLDPLB)) {
printf("PCIE: SDR0_PExRCSSET hldplb error\n");
err = -1;
}
/* SDR0_PExRCSSET rdy */
if ((valPE0 & PESDRx_RCSSET_RDY) || (valPE1 & PESDRx_RCSSET_RDY)) {
printf("PCIE: SDR0_PExRCSSET rdy error\n");
err = -1;
}
return err;
}
/*
* Initialize PCI Express core as described in User Manual
* TODO: double check PE SDR PLL Register with the updated user manual.
*/
int ppc4xx_init_pcie(void)
{
if (check_error())
return -1;
return 0;
}
#endif /* CONFIG_460EX */
#if defined(CONFIG_405EX)
static void ppc4xx_setup_utl(u32 port) static void ppc4xx_setup_utl(u32 port)
{ {
u32 utl_base; u32 utl_base;
@ -450,7 +551,7 @@ int ppc4xx_init_pcie(void)
*/ */
return 0; return 0;
} }
#endif #endif /* CONFIG_405EX */
/* /*
* Board-specific pcie initialization * Board-specific pcie initialization
@ -511,6 +612,82 @@ int __ppc4xx_init_pcie_port_hw(int port, int rootport)
} }
#endif /* CONFIG_440SPE */ #endif /* CONFIG_440SPE */
#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
int __ppc4xx_init_pcie_port_hw(int port, int rootport)
{
u32 val = 1 << 24;
u32 utlset1;
if (rootport) {
val = PTYPE_ROOT_PORT << 20;
utlset1 = 0x21222222;
} else {
val = PTYPE_LEGACY_ENDPOINT << 20;
utlset1 = 0x20222222;
}
if (port == 0) {
val |= LNKW_X1 << 12;
} else {
val |= LNKW_X4 << 12;
utlset1 |= 0x00101101;
}
SDR_WRITE(SDRN_PESDR_DLPSET(port), val);
SDR_WRITE(SDRN_PESDR_UTLSET1(port), utlset1);
SDR_WRITE(SDRN_PESDR_UTLSET2(port), 0x01210000);
switch (port) {
case 0:
SDR_WRITE(PESDR0_L0CDRCTL, 0x00003230);
SDR_WRITE(PESDR0_L0DRV, 0x00000136);
SDR_WRITE(PESDR0_L0CLK, 0x00000006);
SDR_WRITE(PESDR0_PHY_CTL_RST,0x10000000);
break;
case 1:
SDR_WRITE(PESDR1_L0CDRCTL, 0x00003230);
SDR_WRITE(PESDR1_L1CDRCTL, 0x00003230);
SDR_WRITE(PESDR1_L2CDRCTL, 0x00003230);
SDR_WRITE(PESDR1_L3CDRCTL, 0x00003230);
SDR_WRITE(PESDR1_L0DRV, 0x00000136);
SDR_WRITE(PESDR1_L1DRV, 0x00000136);
SDR_WRITE(PESDR1_L2DRV, 0x00000136);
SDR_WRITE(PESDR1_L3DRV, 0x00000136);
SDR_WRITE(PESDR1_L0CLK, 0x00000006);
SDR_WRITE(PESDR1_L1CLK, 0x00000006);
SDR_WRITE(PESDR1_L2CLK, 0x00000006);
SDR_WRITE(PESDR1_L3CLK, 0x00000006);
SDR_WRITE(PESDR1_PHY_CTL_RST,0x10000000);
break;
}
SDR_WRITE(SDRN_PESDR_RCSSET(port), SDR_READ(SDRN_PESDR_RCSSET(port)) |
(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTPYN));
/* Poll for PHY reset */
switch (port) {
case 0:
while (!(SDR_READ(PESDR0_RSTSTA) & 0x1))
udelay(10);
break;
case 1:
while (!(SDR_READ(PESDR1_RSTSTA) & 0x1))
udelay(10);
break;
}
SDR_WRITE(SDRN_PESDR_RCSSET(port),
(SDR_READ(SDRN_PESDR_RCSSET(port)) &
~(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL)) |
PESDRx_RCSSET_RSTPYN);
return 0;
}
#endif /* CONFIG_440SPE */
#if defined(CONFIG_405EX) #if defined(CONFIG_405EX)
int __ppc4xx_init_pcie_port_hw(int port, int rootport) int __ppc4xx_init_pcie_port_hw(int port, int rootport)
{ {
@ -564,12 +741,12 @@ __attribute__((weak, alias("__ppc4xx_init_pcie_port_hw")));
* range (hangs the core upon config transaction attempts when set * range (hangs the core upon config transaction attempts when set
* otherwise) while revA uses c_nnnn_nnnn. * otherwise) while revA uses c_nnnn_nnnn.
* *
* For revA: * For 440SPe revA:
* PCIE0: 0xc_4000_0000 * PCIE0: 0xc_4000_0000
* PCIE1: 0xc_8000_0000 * PCIE1: 0xc_8000_0000
* PCIE2: 0xc_c000_0000 * PCIE2: 0xc_c000_0000
* *
* For revB: * For 440SPe revB:
* PCIE0: 0xd_0000_0000 * PCIE0: 0xd_0000_0000
* PCIE1: 0xd_2000_0000 * PCIE1: 0xd_2000_0000
* PCIE2: 0xd_4000_0000 * PCIE2: 0xd_4000_0000
@ -577,6 +754,10 @@ __attribute__((weak, alias("__ppc4xx_init_pcie_port_hw")));
* For 405EX: * For 405EX:
* PCIE0: 0xa000_0000 * PCIE0: 0xa000_0000
* PCIE1: 0xc000_0000 * PCIE1: 0xc000_0000
*
* For 460EX/GT:
* PCIE0: 0xd_0000_0000
* PCIE1: 0xd_2000_0000
*/ */
static inline u64 ppc4xx_get_cfgaddr(int port) static inline u64 ppc4xx_get_cfgaddr(int port)
{ {
@ -609,6 +790,12 @@ static inline u64 ppc4xx_get_cfgaddr(int port)
} }
} }
#endif #endif
#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
if (port == 0)
return 0x0000000d00000000ULL;
else
return 0x0000000d20000000ULL;
#endif
} }
/* /*

@ -64,16 +64,22 @@ DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_440) #if defined(CONFIG_440)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
#define UART0_BASE CFG_PERIPHERAL_BASE + 0x00000300 defined(CONFIG_460EX) || defined(CONFIG_460GT)
#define UART1_BASE CFG_PERIPHERAL_BASE + 0x00000400 #define UART0_BASE (CFG_PERIPHERAL_BASE + 0x00000300)
#define UART1_BASE (CFG_PERIPHERAL_BASE + 0x00000400)
#else #else
#define UART0_BASE CFG_PERIPHERAL_BASE + 0x00000200 #define UART0_BASE (CFG_PERIPHERAL_BASE + 0x00000200)
#define UART1_BASE CFG_PERIPHERAL_BASE + 0x00000300 #define UART1_BASE (CFG_PERIPHERAL_BASE + 0x00000300)
#endif #endif
#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) #if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
#define UART2_BASE CFG_PERIPHERAL_BASE + 0x00000600 #define UART2_BASE (CFG_PERIPHERAL_BASE + 0x00000600)
#endif
#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
#define UART2_BASE (CFG_PERIPHERAL_BASE + 0x00000500)
#define UART3_BASE (CFG_PERIPHERAL_BASE + 0x00000600)
#endif #endif
#if defined(CONFIG_440GP) #if defined(CONFIG_440GP)
@ -94,11 +100,13 @@ DECLARE_GLOBAL_DATA_PTR;
#define UART1_SDR sdr_uart1 #define UART1_SDR sdr_uart1
#if defined(CONFIG_440EP) || defined(CONFIG_440EPx) || \ #if defined(CONFIG_440EP) || defined(CONFIG_440EPx) || \
defined(CONFIG_440GR) || defined(CONFIG_440GRx) || \ defined(CONFIG_440GR) || defined(CONFIG_440GRx) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPe) defined(CONFIG_440SP) || defined(CONFIG_440SPe) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT)
#define UART2_SDR sdr_uart2 #define UART2_SDR sdr_uart2
#endif #endif
#if defined(CONFIG_440EP) || defined(CONFIG_440EPx) || \ #if defined(CONFIG_440EP) || defined(CONFIG_440EPx) || \
defined(CONFIG_440GR) || defined(CONFIG_440GRx) defined(CONFIG_440GR) || defined(CONFIG_440GRx) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT)
#define UART3_SDR sdr_uart3 #define UART3_SDR sdr_uart3
#endif #endif
#define MFREG(a, d) mfsdr(a, d) #define MFREG(a, d) mfsdr(a, d)

Loading…
Cancel
Save