split mpc8xx hooks from cmd_ide.c

move most of mpc8xx hooks from cmd_ide.c into ide_preinit() and newly created
ide_init_postreset() (invoked after calling ide_reset after ide_preinit),
some cleanup to make checkpatch happy, enable IDE init hooks in configs of
affected boards.
confusingly, these hooks are used by more than just mpc8xx-based boards, and
therefore are placed in arch/ppc/lib/

note: checkpatch still emits warnings about using volatile

Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
master
Pavel Herrmann 12 years ago committed by Tom Rini
parent 94fa029a6d
commit 8d1165e11a
  1. 1
      arch/powerpc/lib/Makefile
  2. 201
      arch/powerpc/lib/ide.c
  3. 31
      arch/powerpc/lib/ide.h
  4. 190
      common/cmd_ide.c
  5. 1
      include/configs/CPC45.h
  6. 1
      include/configs/ICU862.h
  7. 2
      include/configs/IVML24.h
  8. 2
      include/configs/IVMS8.h
  9. 1
      include/configs/KUP4K.h
  10. 1
      include/configs/KUP4X.h
  11. 1
      include/configs/MBX.h
  12. 1
      include/configs/NETTA.h
  13. 1
      include/configs/NSCU.h
  14. 1
      include/configs/R360MPI.h
  15. 1
      include/configs/RPXClassic.h
  16. 1
      include/configs/RPXlite.h
  17. 1
      include/configs/RPXlite_DW.h
  18. 1
      include/configs/RRvision.h
  19. 2
      include/configs/SPD823TS.h
  20. 1
      include/configs/TK885D.h
  21. 1
      include/configs/TQM823L.h
  22. 1
      include/configs/TQM823M.h
  23. 1
      include/configs/TQM850L.h
  24. 1
      include/configs/TQM850M.h
  25. 1
      include/configs/TQM855L.h
  26. 1
      include/configs/TQM855M.h
  27. 1
      include/configs/TQM860L.h
  28. 1
      include/configs/TQM860M.h
  29. 1
      include/configs/TQM862L.h
  30. 1
      include/configs/TQM862M.h
  31. 1
      include/configs/TQM866M.h
  32. 1
      include/configs/TQM885D.h
  33. 1
      include/configs/atc.h
  34. 1
      include/configs/c2mon.h
  35. 1
      include/configs/lwmon.h
  36. 1
      include/configs/quantum.h
  37. 2
      include/configs/svm_sc8xx.h
  38. 1
      include/configs/uc100.h
  39. 1
      include/configs/virtlab2.h
  40. 8
      include/ide.h

@ -50,6 +50,7 @@ COBJS-y += cache.o
COBJS-y += extable.o
COBJS-y += interrupts.o
COBJS-$(CONFIG_CMD_KGDB) += kgdb.o
COBJS-${CONFIG_CMD_IDE} += ide.o
COBJS-y += time.o
# Workaround for local bus unaligned access problems

@ -0,0 +1,201 @@
/*
* (C) Copyright 2000-2011
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
/* Code taken from cmd_ide.c */
#include <common.h>
#include <ata.h>
#include "ide.h"
#ifdef CONFIG_IDE_8xx_DIRECT
#include <mpc8xx.h>
#include <pcmcia.h>
DECLARE_GLOBAL_DATA_PTR;
/* Timings for IDE Interface
*
* SETUP / LENGTH / HOLD - cycles valid for 50 MHz clk
* 70 165 30 PIO-Mode 0, [ns]
* 4 9 2 [Cycles]
* 50 125 20 PIO-Mode 1, [ns]
* 3 7 2 [Cycles]
* 30 100 15 PIO-Mode 2, [ns]
* 2 6 1 [Cycles]
* 30 80 10 PIO-Mode 3, [ns]
* 2 5 1 [Cycles]
* 25 70 10 PIO-Mode 4, [ns]
* 2 4 1 [Cycles]
*/
static const pio_config_t pio_config_ns[IDE_MAX_PIO_MODE+1] = {
/* Setup Length Hold */
{ 70, 165, 30 }, /* PIO-Mode 0, [ns] */
{ 50, 125, 20 }, /* PIO-Mode 1, [ns] */
{ 30, 101, 15 }, /* PIO-Mode 2, [ns] */
{ 30, 80, 10 }, /* PIO-Mode 3, [ns] */
{ 25, 70, 10 }, /* PIO-Mode 4, [ns] */
};
static pio_config_t pio_config_clk[IDE_MAX_PIO_MODE+1];
#ifndef CONFIG_SYS_PIO_MODE
#define CONFIG_SYS_PIO_MODE 0 /* use a relaxed default */
#endif
static int pio_mode = CONFIG_SYS_PIO_MODE;
/* Make clock cycles and always round up */
#define PCMCIA_MK_CLKS(t, T) (((t) * (T) + 999U) / 1000U)
static void set_pcmcia_timing(int pmode)
{
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia);
ulong timings;
debug("Set timing for PIO Mode %d\n", pmode);
timings = PCMCIA_SHT(pio_config_clk[pmode].t_hold)
| PCMCIA_SST(pio_config_clk[pmode].t_setup)
| PCMCIA_SL(pio_config_clk[pmode].t_length);
/*
* IDE 0
*/
pcmp->pcmc_pbr0 = CONFIG_SYS_PCMCIA_PBR0;
#if (CONFIG_SYS_PCMCIA_POR0 != 0)
pcmp->pcmc_por0 = CONFIG_SYS_PCMCIA_POR0 | timings;
#else
pcmp->pcmc_por0 = CONFIG_SYS_PCMCIA_POR0;
#endif
debug("PBR0: %08x POR0: %08x\n", pcmp->pcmc_pbr0, pcmp->pcmc_por0);
pcmp->pcmc_pbr1 = CONFIG_SYS_PCMCIA_PBR1;
#if (CONFIG_SYS_PCMCIA_POR1 != 0)
pcmp->pcmc_por1 = CONFIG_SYS_PCMCIA_POR1 | timings;
#else
pcmp->pcmc_por1 = CONFIG_SYS_PCMCIA_POR1;
#endif
debug("PBR1: %08x POR1: %08x\n", pcmp->pcmc_pbr1, pcmp->pcmc_por1);
pcmp->pcmc_pbr2 = CONFIG_SYS_PCMCIA_PBR2;
#if (CONFIG_SYS_PCMCIA_POR2 != 0)
pcmp->pcmc_por2 = CONFIG_SYS_PCMCIA_POR2 | timings;
#else
pcmp->pcmc_por2 = CONFIG_SYS_PCMCIA_POR2;
#endif
debug("PBR2: %08x POR2: %08x\n", pcmp->pcmc_pbr2, pcmp->pcmc_por2);
pcmp->pcmc_pbr3 = CONFIG_SYS_PCMCIA_PBR3;
#if (CONFIG_SYS_PCMCIA_POR3 != 0)
pcmp->pcmc_por3 = CONFIG_SYS_PCMCIA_POR3 | timings;
#else
pcmp->pcmc_por3 = CONFIG_SYS_PCMCIA_POR3;
#endif
debug("PBR3: %08x POR3: %08x\n", pcmp->pcmc_pbr3, pcmp->pcmc_por3);
/*
* IDE 1
*/
pcmp->pcmc_pbr4 = CONFIG_SYS_PCMCIA_PBR4;
#if (CONFIG_SYS_PCMCIA_POR4 != 0)
pcmp->pcmc_por4 = CONFIG_SYS_PCMCIA_POR4 | timings;
#else
pcmp->pcmc_por4 = CONFIG_SYS_PCMCIA_POR4;
#endif
debug("PBR4: %08x POR4: %08x\n", pcmp->pcmc_pbr4, pcmp->pcmc_por4);
pcmp->pcmc_pbr5 = CONFIG_SYS_PCMCIA_PBR5;
#if (CONFIG_SYS_PCMCIA_POR5 != 0)
pcmp->pcmc_por5 = CONFIG_SYS_PCMCIA_POR5 | timings;
#else
pcmp->pcmc_por5 = CONFIG_SYS_PCMCIA_POR5;
#endif
debug("PBR5: %08x POR5: %08x\n", pcmp->pcmc_pbr5, pcmp->pcmc_por5);
pcmp->pcmc_pbr6 = CONFIG_SYS_PCMCIA_PBR6;
#if (CONFIG_SYS_PCMCIA_POR6 != 0)
pcmp->pcmc_por6 = CONFIG_SYS_PCMCIA_POR6 | timings;
#else
pcmp->pcmc_por6 = CONFIG_SYS_PCMCIA_POR6;
#endif
debug("PBR6: %08x POR6: %08x\n", pcmp->pcmc_pbr6, pcmp->pcmc_por6);
pcmp->pcmc_pbr7 = CONFIG_SYS_PCMCIA_PBR7;
#if (CONFIG_SYS_PCMCIA_POR7 != 0)
pcmp->pcmc_por7 = CONFIG_SYS_PCMCIA_POR7 | timings;
#else
pcmp->pcmc_por7 = CONFIG_SYS_PCMCIA_POR7;
#endif
debug("PBR7: %08x POR7: %08x\n", pcmp->pcmc_pbr7, pcmp->pcmc_por7);
}
int ide_preinit(void)
{
int i;
/* Initialize PIO timing tables */
for (i = 0; i <= IDE_MAX_PIO_MODE; ++i) {
pio_config_clk[i].t_setup =
PCMCIA_MK_CLKS(pio_config_ns[i].t_setup, gd->bus_clk);
pio_config_clk[i].t_length =
PCMCIA_MK_CLKS(pio_config_ns[i].t_length, gd->bus_clk);
pio_config_clk[i].t_hold =
PCMCIA_MK_CLKS(pio_config_ns[i].t_hold, gd->bus_clk);
debug("PIO Mode %d: setup=%2d ns/%d clk" " len=%3d ns/%d clk"
" hold=%2d ns/%d clk\n", i, pio_config_ns[i].t_setup,
pio_config_clk[i].t_setup, pio_config_ns[i].t_length,
pio_config_clk[i].t_length, pio_config_ns[i].t_hold,
pio_config_clk[i].t_hold);
}
return 0;
}
int ide_init_postreset(void)
{
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia);
/* PCMCIA / IDE initialization for common mem space */
pcmp->pcmc_pgcrb = 0;
/* start in PIO mode 0 - most relaxed timings */
pio_mode = 0;
set_pcmcia_timing(pio_mode);
return 0;
}
#endif /* CONFIG_IDE_8xx_DIRECT */
#ifdef CONFIG_IDE_8xx_PCCARD
int ide_preinit(void)
{
ide_devices_found = 0;
/* initialize the PCMCIA IDE adapter card */
pcmcia_on();
if (!ide_devices_found)
return 1;
udelay(1000000);/* 1 s */
return 0;
}
#endif

@ -0,0 +1,31 @@
/*
* (C) Copyright 2012
* Pavel Herrmann <morpheus.ibis@gmail.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _MPC8XX_IDE_H_
#define _MPC8XX_IDE_H_ 1
#ifdef CONFIG_IDE_8xx_PCCARD
int pcmcia_on(void);
extern int ide_devices_found;
#endif
#endif

@ -53,10 +53,6 @@
# include <status_led.h>
#endif
#ifdef CONFIG_IDE_8xx_DIRECT
DECLARE_GLOBAL_DATA_PTR;
#endif
#ifdef __PPC__
# define EIEIO __asm__ volatile ("eieio")
# define SYNC __asm__ volatile ("sync")
@ -65,45 +61,6 @@ DECLARE_GLOBAL_DATA_PTR;
# define SYNC /* nothing */
#endif
#ifdef CONFIG_IDE_8xx_DIRECT
/* Timings for IDE Interface
*
* SETUP / LENGTH / HOLD - cycles valid for 50 MHz clk
* 70 165 30 PIO-Mode 0, [ns]
* 4 9 2 [Cycles]
* 50 125 20 PIO-Mode 1, [ns]
* 3 7 2 [Cycles]
* 30 100 15 PIO-Mode 2, [ns]
* 2 6 1 [Cycles]
* 30 80 10 PIO-Mode 3, [ns]
* 2 5 1 [Cycles]
* 25 70 10 PIO-Mode 4, [ns]
* 2 4 1 [Cycles]
*/
const static pio_config_t pio_config_ns [IDE_MAX_PIO_MODE+1] =
{
/* Setup Length Hold */
{ 70, 165, 30 }, /* PIO-Mode 0, [ns] */
{ 50, 125, 20 }, /* PIO-Mode 1, [ns] */
{ 30, 101, 15 }, /* PIO-Mode 2, [ns] */
{ 30, 80, 10 }, /* PIO-Mode 3, [ns] */
{ 25, 70, 10 }, /* PIO-Mode 4, [ns] */
};
static pio_config_t pio_config_clk [IDE_MAX_PIO_MODE+1];
#ifndef CONFIG_SYS_PIO_MODE
#define CONFIG_SYS_PIO_MODE 0 /* use a relaxed default */
#endif
static int pio_mode = CONFIG_SYS_PIO_MODE;
/* Make clock cycles and always round up */
#define PCMCIA_MK_CLKS( t, T ) (( (t) * (T) + 999U ) / 1000U )
#endif /* CONFIG_IDE_8xx_DIRECT */
/* ------------------------------------------------------------------------- */
/* Current I/O Device */
@ -166,10 +123,6 @@ ulong atapi_read (int device, lbaint_t blknr, ulong blkcnt, void *buffer);
#endif
#ifdef CONFIG_IDE_8xx_DIRECT
static void set_pcmcia_timing (int pmode);
#endif
/* ------------------------------------------------------------------------- */
int do_ide(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
@ -392,22 +345,14 @@ inline int ide_set_piomode(int pio_mode)
void ide_init(void)
{
#ifdef CONFIG_IDE_8xx_DIRECT
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia);
#endif
unsigned char c;
int i, bus;
#ifdef CONFIG_IDE_8xx_PCCARD
extern int pcmcia_on(void);
extern int ide_devices_found; /* Initialized in check_ide_device() */
#endif /* CONFIG_IDE_8xx_PCCARD */
#ifdef CONFIG_IDE_PREINIT
extern int ide_preinit(void);
WATCHDOG_RESET();
if (ide_preinit()) {
@ -416,40 +361,8 @@ void ide_init(void)
}
#endif /* CONFIG_IDE_PREINIT */
#ifdef CONFIG_IDE_8xx_PCCARD
extern int pcmcia_on(void);
extern int ide_devices_found; /* Initialized in check_ide_device() */
WATCHDOG_RESET();
ide_devices_found = 0;
/* initialize the PCMCIA IDE adapter card */
pcmcia_on();
if (!ide_devices_found)
return;
udelay(1000000); /* 1 s */
#endif /* CONFIG_IDE_8xx_PCCARD */
WATCHDOG_RESET();
#ifdef CONFIG_IDE_8xx_DIRECT
/* Initialize PIO timing tables */
for (i = 0; i <= IDE_MAX_PIO_MODE; ++i) {
pio_config_clk[i].t_setup =
PCMCIA_MK_CLKS(pio_config_ns[i].t_setup, gd->bus_clk);
pio_config_clk[i].t_length =
PCMCIA_MK_CLKS(pio_config_ns[i].t_length,
gd->bus_clk);
pio_config_clk[i].t_hold =
PCMCIA_MK_CLKS(pio_config_ns[i].t_hold, gd->bus_clk);
debug("PIO Mode %d: setup=%2d ns/%d clk" " len=%3d ns/%d clk"
" hold=%2d ns/%d clk\n", i, pio_config_ns[i].t_setup,
pio_config_clk[i].t_setup, pio_config_ns[i].t_length,
pio_config_clk[i].t_length, pio_config_ns[i].t_hold,
pio_config_clk[i].t_hold);
}
#endif /* CONFIG_IDE_8xx_DIRECT */
/*
* Reset the IDE just to be sure.
* Light LED's to show
@ -459,14 +372,14 @@ void ide_init(void)
/* ATAPI Drives seems to need a proper IDE Reset */
ide_reset();
#ifdef CONFIG_IDE_8xx_DIRECT
/* PCMCIA / IDE initialization for common mem space */
pcmp->pcmc_pgcrb = 0;
#ifdef CONFIG_IDE_INIT_POSTRESET
WATCHDOG_RESET();
/* start in PIO mode 0 - most relaxed timings */
pio_mode = 0;
set_pcmcia_timing(pio_mode);
#endif /* CONFIG_IDE_8xx_DIRECT */
if (ide_init_postreset()) {
puts("ide_preinit_postreset failed\n");
return;
}
#endif /* CONFIG_IDE_INIT_POSTRESET */
/*
* Wait for IDE to get ready.
@ -568,95 +481,6 @@ block_dev_desc_t *ide_get_dev(int dev)
}
#endif
#ifdef CONFIG_IDE_8xx_DIRECT
static void set_pcmcia_timing(int pmode)
{
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia);
ulong timings;
debug("Set timing for PIO Mode %d\n", pmode);
timings = PCMCIA_SHT(pio_config_clk[pmode].t_hold)
| PCMCIA_SST(pio_config_clk[pmode].t_setup)
| PCMCIA_SL(pio_config_clk[pmode].t_length);
/*
* IDE 0
*/
pcmp->pcmc_pbr0 = CONFIG_SYS_PCMCIA_PBR0;
pcmp->pcmc_por0 = CONFIG_SYS_PCMCIA_POR0
#if (CONFIG_SYS_PCMCIA_POR0 != 0)
| timings
#endif
;
debug("PBR0: %08x POR0: %08x\n", pcmp->pcmc_pbr0, pcmp->pcmc_por0);
pcmp->pcmc_pbr1 = CONFIG_SYS_PCMCIA_PBR1;
pcmp->pcmc_por1 = CONFIG_SYS_PCMCIA_POR1
#if (CONFIG_SYS_PCMCIA_POR1 != 0)
| timings
#endif
;
debug("PBR1: %08x POR1: %08x\n", pcmp->pcmc_pbr1, pcmp->pcmc_por1);
pcmp->pcmc_pbr2 = CONFIG_SYS_PCMCIA_PBR2;
pcmp->pcmc_por2 = CONFIG_SYS_PCMCIA_POR2
#if (CONFIG_SYS_PCMCIA_POR2 != 0)
| timings
#endif
;
debug("PBR2: %08x POR2: %08x\n", pcmp->pcmc_pbr2, pcmp->pcmc_por2);
pcmp->pcmc_pbr3 = CONFIG_SYS_PCMCIA_PBR3;
pcmp->pcmc_por3 = CONFIG_SYS_PCMCIA_POR3
#if (CONFIG_SYS_PCMCIA_POR3 != 0)
| timings
#endif
;
debug("PBR3: %08x POR3: %08x\n", pcmp->pcmc_pbr3, pcmp->pcmc_por3);
/*
* IDE 1
*/
pcmp->pcmc_pbr4 = CONFIG_SYS_PCMCIA_PBR4;
pcmp->pcmc_por4 = CONFIG_SYS_PCMCIA_POR4
#if (CONFIG_SYS_PCMCIA_POR4 != 0)
| timings
#endif
;
debug("PBR4: %08x POR4: %08x\n", pcmp->pcmc_pbr4, pcmp->pcmc_por4);
pcmp->pcmc_pbr5 = CONFIG_SYS_PCMCIA_PBR5;
pcmp->pcmc_por5 = CONFIG_SYS_PCMCIA_POR5
#if (CONFIG_SYS_PCMCIA_POR5 != 0)
| timings
#endif
;
debug("PBR5: %08x POR5: %08x\n", pcmp->pcmc_pbr5, pcmp->pcmc_por5);
pcmp->pcmc_pbr6 = CONFIG_SYS_PCMCIA_PBR6;
pcmp->pcmc_por6 = CONFIG_SYS_PCMCIA_POR6
#if (CONFIG_SYS_PCMCIA_POR6 != 0)
| timings
#endif
;
debug("PBR6: %08x POR6: %08x\n", pcmp->pcmc_pbr6, pcmp->pcmc_por6);
pcmp->pcmc_pbr7 = CONFIG_SYS_PCMCIA_PBR7;
pcmp->pcmc_por7 = CONFIG_SYS_PCMCIA_POR7
#if (CONFIG_SYS_PCMCIA_POR7 != 0)
| timings
#endif
;
debug("PBR7: %08x POR7: %08x\n", pcmp->pcmc_pbr7, pcmp->pcmc_por7);
}
#endif /* CONFIG_IDE_8xx_DIRECT */
/* ------------------------------------------------------------------------- */
/* We only need to swap data if we are running on a big endian cpu. */

@ -480,6 +480,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */

@ -349,6 +349,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */

@ -318,6 +318,8 @@
* IDE/ATA stuff
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_INIT_POSTRESET 1 /* Use postreset IDE hook */
#define CONFIG_IDE_8xx_DIRECT 1 /* PCMCIA interface required */
#define CONFIG_IDE_RESET 1 /* reset for ide supported */

@ -312,6 +312,8 @@
* IDE/ATA stuff
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_INIT_POSTRESET 1 /* Use postreset IDE hook */
#define CONFIG_IDE_8xx_DIRECT 1 /* PCMCIA interface required */
#define CONFIG_IDE_RESET 1 /* reset for ide supported */

@ -353,6 +353,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */

@ -366,6 +366,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */

@ -276,6 +276,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */

@ -629,6 +629,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */

@ -318,6 +318,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */

@ -329,6 +329,7 @@
*/
#if 1
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */

@ -314,6 +314,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */

@ -249,6 +249,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */

@ -335,6 +335,7 @@
* IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */

@ -329,6 +329,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */

@ -303,6 +303,8 @@
* IDE/ATA stuff
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_INIT_POSTRESET 1 /* Use postreset IDE hook */
#define CONFIG_IDE_8xx_DIRECT 1 /* PCMCIA interface required */
#define CONFIG_IDE_LED 1 /* LED for ide supported */
#define CONFIG_IDE_RESET 1 /* reset for ide supported */

@ -343,6 +343,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */

@ -335,6 +335,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */

@ -331,6 +331,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */

@ -320,6 +320,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */

@ -322,6 +322,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */

@ -324,6 +324,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */

@ -359,6 +359,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */

@ -323,6 +323,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */

@ -324,6 +324,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */

@ -327,6 +327,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */

@ -328,6 +328,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */

@ -356,6 +356,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */

@ -341,6 +341,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */

@ -482,6 +482,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */

@ -302,6 +302,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */

@ -494,6 +494,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */

@ -317,6 +317,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */

@ -359,6 +359,8 @@
#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_INIT_POSTRESET 1 /* Use postreset IDE hook */
#define CONFIG_IDE_8xx_DIRECT 1 /* Direct IDE not supported */
#undef CONFIG_IDE_LED /* LED for ide not supported */
#undef CONFIG_IDE_RESET /* reset for ide not supported */

@ -331,6 +331,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */

@ -329,6 +329,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */

@ -54,6 +54,14 @@ void ide_init(void);
ulong ide_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer);
ulong ide_write(int device, ulong blknr, lbaint_t blkcnt, const void *buffer);
#ifdef CONFIG_IDE_PREINIT
int ide_preinit(void);
#endif
#ifdef CONFIG_IDE_INIT_POSTRESET
int ide_init_postreset(void);
#endif
#if defined(CONFIG_OF_IDE_FIXUP)
int ide_device_present(int dev);
#endif

Loading…
Cancel
Save