sf: eeprom_m95xxx: fix up style

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
master
Mike Frysinger 13 years ago
parent 9cbfee6dc2
commit a1f77b696d
  1. 24
      drivers/mtd/spi/eeprom_m95xxx.c

@ -37,33 +37,33 @@
#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0
#endif
ssize_t spi_read (uchar *addr, int alen, uchar *buffer, int len)
ssize_t spi_read(uchar *addr, int alen, uchar *buffer, int len)
{
struct spi_slave *slave;
u8 cmd = SPI_EEPROM_READ;
slave = spi_setup_slave(CONFIG_DEFAULT_SPI_BUS, 1, 1000000,
CONFIG_DEFAULT_SPI_MODE);
if(!slave)
if (!slave)
return 0;
spi_claim_bus(slave);
/* command */
if(spi_xfer(slave, 8, &cmd, NULL, SPI_XFER_BEGIN))
if (spi_xfer(slave, 8, &cmd, NULL, SPI_XFER_BEGIN))
return -1;
/*
* if alen == 3, addr[0] is the block number, we never use it here. All we
* need are the lower 16 bits
* if alen == 3, addr[0] is the block number, we never use it here.
* All we need are the lower 16 bits.
*/
if (alen == 3)
addr++;
/* address, and data */
if(spi_xfer(slave, 16, addr, NULL, 0))
if (spi_xfer(slave, 16, addr, NULL, 0))
return -1;
if(spi_xfer(slave, 8 * len, NULL, buffer, SPI_XFER_END))
if (spi_xfer(slave, 8 * len, NULL, buffer, SPI_XFER_END))
return -1;
spi_release_bus(slave);
@ -71,7 +71,7 @@ ssize_t spi_read (uchar *addr, int alen, uchar *buffer, int len)
return len;
}
ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
ssize_t spi_write(uchar *addr, int alen, uchar *buffer, int len)
{
struct spi_slave *slave;
char buf[3];
@ -85,7 +85,7 @@ ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
spi_claim_bus(slave);
buf[0] = SPI_EEPROM_WREN;
if(spi_xfer(slave, 8, buf, NULL, SPI_XFER_BEGIN | SPI_XFER_END))
if (spi_xfer(slave, 8, buf, NULL, SPI_XFER_BEGIN | SPI_XFER_END))
return -1;
buf[0] = SPI_EEPROM_WRITE;
@ -98,9 +98,9 @@ ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
memcpy(buf + 1, addr, alen);
/* command + addr, then data */
if(spi_xfer(slave, 24, buf, NULL, SPI_XFER_BEGIN))
if (spi_xfer(slave, 24, buf, NULL, SPI_XFER_BEGIN))
return -1;
if(spi_xfer(slave, len * 8, buffer, NULL, SPI_XFER_END))
if (spi_xfer(slave, len * 8, buffer, NULL, SPI_XFER_END))
return -1;
start = get_timer(0);
@ -115,7 +115,7 @@ ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
} while (get_timer(start) < CONFIG_SYS_SPI_WRITE_TOUT);
if (buf[1] & 1)
printf ("*** spi_write: Time out while writing!\n");
printf("*** spi_write: Timeout while writing!\n");
spi_release_bus(slave);
spi_free_slave(slave);

Loading…
Cancel
Save