Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

configs: ls1012a: add pfe configuration for LS1012A

Browse Source 
Add configurations for PFE.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
master
Calvin Johnson 7 years ago committed by Joe Hershberger
parent ac0ba47b9c
commit a802d1e268
12 changed files with 40 additions and 15 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 2
      configs/ls1012a2g5rdb_qspi_defconfig
  2. 2
      configs/ls1012afrdm_qspi_defconfig
  3. 2
      configs/ls1012aqds_qspi_defconfig
  4. 2
      configs/ls1012ardb_qspi_defconfig
  5. 1
      drivers/net/Kconfig
  6. 1
      drivers/net/Makefile
  7. 12
      drivers/net/pfe_eth/Kconfig
  8. 12
      drivers/net/pfe_eth/Makefile
  9. 11
      include/configs/ls1012a2g5rdb.h
  10. 6
      include/configs/ls1012a_common.h
  11. 2
      include/configs/ls1012afrdm.h
  12. 2
      include/configs/ls1012ardb.h

2
configs/ls1012a2g5rdb_qspi_defconfig
Unescape View File

@ -31,7 +31,9 @@ CONFIG_DM=y
CONFIG_DM_MMC=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_FSL_PFE=y
CONFIG_SYS_NS16550=y
CONFIG_DM_SPI=y
CONFIG_USB=y

2
configs/ls1012afrdm_qspi_defconfig
Unescape View File

@ -29,8 +29,10 @@ CONFIG_DM=y
# CONFIG_MMC is not set
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_E1000=y
CONFIG_FSL_PFE=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y

2
configs/ls1012aqds_qspi_defconfig
Unescape View File

@ -36,8 +36,10 @@ CONFIG_SCSI_AHCI=y
CONFIG_DM_MMC=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_E1000=y
CONFIG_FSL_PFE=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y

2
configs/ls1012ardb_qspi_defconfig
Unescape View File

@ -32,8 +32,10 @@ CONFIG_DM=y
CONFIG_DM_MMC=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_E1000=y
CONFIG_FSL_PFE=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y

1
drivers/net/Kconfig
Unescape View File

@ -1,4 +1,5 @@
source "drivers/net/phy/Kconfig"
source "drivers/net/pfe_eth/Kconfig"
config DM_ETH
bool "Enable Driver Model for Ethernet drivers"

1
drivers/net/Makefile
Unescape View File

@ -73,3 +73,4 @@ obj-$(CONFIG_FSL_MEMAC) += fm/memac_phy.o
obj-$(CONFIG_VSC9953) += vsc9953.o
obj-$(CONFIG_PIC32_ETH) += pic32_mdio.o pic32_eth.o
obj-$(CONFIG_DWC_ETH_QOS) += dwc_eth_qos.o
obj-$(CONFIG_FSL_PFE) += pfe_eth/

12
drivers/net/pfe_eth/Kconfig
Unescape View File

@ -0,0 +1,12 @@
menuconfig FSL_PFE
bool "NXP PFE Ethernet driver"
help
This driver provides support for NXP's Packet Forwarding Engine.
if FSL_PFE
config SYS_FSL_PFE_ADDR
hex "PFE base address"
default 0x04000000
endif

12
drivers/net/pfe_eth/Makefile
Unescape View File

@ -0,0 +1,12 @@
# Copyright 2015-2016 Freescale Semiconductor, Inc.
# Copyright 2017 NXP
#
# SPDX-License-Identifier:GPL-2.0+
# Layerscape PFE driver
obj-y += pfe_cmd.o \
pfe_driver.o \
pfe_eth.o \
pfe_firmware.o \
pfe_hw.o \
pfe_mdio.o

11
include/configs/ls1012a2g5rdb.h
Unescape View File

@ -9,15 +9,6 @@
#include "ls1012a_common.h"
/* PFE Ethernet */
#ifdef CONFIG_FSL_PFE
#define EMAC1_PHY_ADDR 0x2
#define EMAC2_PHY_ADDR 0x1
#define CONFIG_PHYLIB
#define CONFIG_PHYLIB_10G
#define CONFIG_PHY_AQUANTIA
#endif
/* DDR */
#define CONFIG_DIMM_SLOTS_PER_CTLR 1
#define CONFIG_CHIP_SELECTS_PER_CTRL 1
@ -110,7 +101,7 @@
#undef CONFIG_BOOTCOMMAND
#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \
#define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd; run qspi_bootcmd; " \
"env exists secureboot && esbc_halt;"
#endif

6
include/configs/ls1012a_common.h
Unescape View File

@ -112,9 +112,9 @@
"kernel_size=0x2800000\0" \
#undef CONFIG_BOOTCOMMAND
#define CONFIG_BOOTCOMMAND "sf probe 0:0; sf read $kernel_load "\
"$kernel_start $kernel_size && "\
"bootm $kernel_load"
#define CONFIG_BOOTCOMMAND "pfe stop; sf probe 0:0; sf read $kernel_load "\
"$kernel_start $kernel_size && "\
"bootm $kernel_load"
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */

2
include/configs/ls1012afrdm.h
Unescape View File

@ -68,7 +68,7 @@
"$kernel_addr $kernel_size && bootm $load_addr#$board\0"
#undef CONFIG_BOOTCOMMAND
#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd"
#define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd;run qspi_bootcmd"
#define CONFIG_CMD_MEMINFO
#define CONFIG_CMD_MEMTEST

2
include/configs/ls1012ardb.h
Unescape View File

@ -117,7 +117,7 @@
"bootm $load_addr#$board\0"
#undef CONFIG_BOOTCOMMAND
#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \
#define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\
"env exists secureboot && esbc_halt;"
#include <asm/fsl_secure_boot.h>

Write Preview
Loading…
Cancel
Save