ARM: mxs: Add Creative ZEN XFi3 board

Add STMP3780-based XFi3 board. This board is a small PMP device
sporting a CPU which was later rebranded to i.MX233 . Currently
supported is USB gadget mode and both external SD and internal
Phison SD-NAND bridge .

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>
master
Marek Vasut 11 years ago committed by Stefano Babic
parent e24278aff2
commit aa04fef49c
  1. 1
      MAINTAINERS
  2. 31
      board/creative/xfi3/Makefile
  3. 134
      board/creative/xfi3/spl_boot.c
  4. 224
      board/creative/xfi3/xfi3.c
  5. 1
      boards.cfg
  6. 69
      include/configs/xfi3.h

@ -980,6 +980,7 @@ Marek Vasut <marek.vasut@gmail.com>
vpac270 xscale/pxa
zipitz2 xscale/pxa
mx23_olinuxino i.MX23
xfi3 i.MX23
m28evk i.MX28
sc_sps_1 i.MX28
m53evk i.MX53

@ -0,0 +1,31 @@
#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
#
include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
ifndef CONFIG_SPL_BUILD
COBJS := xfi3.o
else
COBJS := spl_boot.o
endif
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
$(call cmd_link_o_target, $(OBJS))
#########################################################################
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
#########################################################################

@ -0,0 +1,134 @@
/*
* Creative ZEN X-Fi3 setup
*
* Copyright (C) 2013 Marek Vasut <marex@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <config.h>
#include <asm/io.h>
#include <asm/arch/iomux-mx23.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
#define MUX_CONFIG_EMI (MXS_PAD_1V8 | MXS_PAD_12MA | MXS_PAD_PULLUP)
#define MUX_CONFIG_SSP (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
#define MUX_CONFIG_LCD (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
const iomux_cfg_t iomux_setup[] = {
/* EMI */
MX23_PAD_EMI_D00__EMI_D00 | MUX_CONFIG_EMI,
MX23_PAD_EMI_D01__EMI_D01 | MUX_CONFIG_EMI,
MX23_PAD_EMI_D02__EMI_D02 | MUX_CONFIG_EMI,
MX23_PAD_EMI_D03__EMI_D03 | MUX_CONFIG_EMI,
MX23_PAD_EMI_D04__EMI_D04 | MUX_CONFIG_EMI,
MX23_PAD_EMI_D05__EMI_D05 | MUX_CONFIG_EMI,
MX23_PAD_EMI_D06__EMI_D06 | MUX_CONFIG_EMI,
MX23_PAD_EMI_D07__EMI_D07 | MUX_CONFIG_EMI,
MX23_PAD_EMI_D08__EMI_D08 | MUX_CONFIG_EMI,
MX23_PAD_EMI_D09__EMI_D09 | MUX_CONFIG_EMI,
MX23_PAD_EMI_D10__EMI_D10 | MUX_CONFIG_EMI,
MX23_PAD_EMI_D11__EMI_D11 | MUX_CONFIG_EMI,
MX23_PAD_EMI_D12__EMI_D12 | MUX_CONFIG_EMI,
MX23_PAD_EMI_D13__EMI_D13 | MUX_CONFIG_EMI,
MX23_PAD_EMI_D14__EMI_D14 | MUX_CONFIG_EMI,
MX23_PAD_EMI_D15__EMI_D15 | MUX_CONFIG_EMI,
MX23_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI,
MX23_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI,
MX23_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI,
MX23_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI,
MX23_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI,
MX23_PAD_EMI_CLKN__EMI_CLKN | MUX_CONFIG_EMI,
MX23_PAD_EMI_A00__EMI_A00 | MUX_CONFIG_EMI,
MX23_PAD_EMI_A01__EMI_A01 | MUX_CONFIG_EMI,
MX23_PAD_EMI_A02__EMI_A02 | MUX_CONFIG_EMI,
MX23_PAD_EMI_A03__EMI_A03 | MUX_CONFIG_EMI,
MX23_PAD_EMI_A04__EMI_A04 | MUX_CONFIG_EMI,
MX23_PAD_EMI_A05__EMI_A05 | MUX_CONFIG_EMI,
MX23_PAD_EMI_A06__EMI_A06 | MUX_CONFIG_EMI,
MX23_PAD_EMI_A07__EMI_A07 | MUX_CONFIG_EMI,
MX23_PAD_EMI_A08__EMI_A08 | MUX_CONFIG_EMI,
MX23_PAD_EMI_A09__EMI_A09 | MUX_CONFIG_EMI,
MX23_PAD_EMI_A10__EMI_A10 | MUX_CONFIG_EMI,
MX23_PAD_EMI_A11__EMI_A11 | MUX_CONFIG_EMI,
MX23_PAD_EMI_A12__EMI_A12 | MUX_CONFIG_EMI,
MX23_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI,
MX23_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI,
MX23_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI,
MX23_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI,
MX23_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI,
MX23_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI,
MX23_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI,
MX23_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI,
MX23_PAD_LCD_D00__LCD_D00 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D01__LCD_D01 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D02__LCD_D02 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D03__LCD_D03 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D04__LCD_D04 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D05__LCD_D05 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D06__LCD_D06 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D07__LCD_D07 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D08__LCD_D08 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D09__LCD_D09 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D10__LCD_D10 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D11__LCD_D11 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D12__LCD_D12 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D13__LCD_D13 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D14__LCD_D14 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D15__LCD_D15 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D16__LCD_D16 | MUX_CONFIG_LCD,
MX23_PAD_LCD_D17__LCD_D17 | MUX_CONFIG_LCD,
MX23_PAD_LCD_RESET__LCD_RESET | MUX_CONFIG_LCD,
MX23_PAD_LCD_RS__LCD_RS | MUX_CONFIG_LCD,
MX23_PAD_LCD_WR__LCD_WR | MUX_CONFIG_LCD,
MX23_PAD_LCD_CS__LCD_CS | MUX_CONFIG_LCD,
MX23_PAD_LCD_ENABLE__LCD_ENABLE | MUX_CONFIG_LCD,
MX23_PAD_LCD_VSYNC__LCD_VSYNC | MUX_CONFIG_LCD,
MX23_PAD_SSP1_CMD__SSP1_CMD | MUX_CONFIG_SSP,
MX23_PAD_SSP1_DETECT__GPIO_2_1 | MUX_CONFIG_SSP,
MX23_PAD_SSP1_DATA0__SSP1_DATA0 | MUX_CONFIG_SSP,
MX23_PAD_SSP1_DATA1__SSP1_DATA1 | MUX_CONFIG_SSP,
MX23_PAD_SSP1_DATA2__SSP1_DATA2 | MUX_CONFIG_SSP,
MX23_PAD_SSP1_DATA3__SSP1_DATA3 | MUX_CONFIG_SSP,
MX23_PAD_SSP1_SCK__SSP1_SCK | MUX_CONFIG_SSP,
MX23_PAD_GPMI_D07__GPIO_0_7 | MUX_CONFIG_SSP,
MX23_PAD_GPMI_D00__SSP2_DATA0 | MUX_CONFIG_SSP,
MX23_PAD_GPMI_D01__SSP2_DATA1 | MUX_CONFIG_SSP,
MX23_PAD_GPMI_D02__SSP2_DATA2 | MUX_CONFIG_SSP,
MX23_PAD_GPMI_D03__SSP2_DATA3 | MUX_CONFIG_SSP,
MX23_PAD_GPMI_RDY1__SSP2_CMD | MUX_CONFIG_SSP,
MX23_PAD_GPMI_WRN__SSP2_SCK | MUX_CONFIG_SSP,
/* PWM -- FIXME */
MX23_PAD_PWM2__GPIO_1_28 | MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP,
};
void mxs_adjust_memory_params(uint32_t *dram_vals)
{
/* mDDR configuration values */
const uint32_t regs[] = {
0x01010001, 0x00010000, 0x01000000, 0x00000001,
0x00010101, 0x00000001, 0x00010000, 0x01000001,
0x01010000, 0x00000001, 0x07000200, 0x04070203,
0x02020002, 0x06070a02, 0x0d000201, 0x0305000d,
0x02080800, 0x19330f0a, 0x1f1f1c00, 0x020a1313,
0x03061323, 0x0000000a, 0x00080008, 0x00200020,
0x00200020, 0x00200020, 0x000003f7, 0x00000000,
0x00000000, 0x00000000, 0x00000020, 0x00000000,
0x001023cd, 0x20410010, 0x00006665, 0x00000000,
0x00000101, 0x00000001, 0x00000000, 0x00000000,
};
memcpy(dram_vals, regs, sizeof(regs));
}
void board_init_ll(const uint32_t arg, const uint32_t *resptr)
{
mxs_common_spl_init(arg, resptr, iomux_setup, ARRAY_SIZE(iomux_setup));
}

@ -0,0 +1,224 @@
/*
* Creative ZEN X-Fi3 board
*
* Copyright (C) 2013 Marek Vasut <marex@denx.de>
*
* Hardware investigation done by:
*
* Amaury Pouly <amaury.pouly@gmail.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <errno.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch/iomux-mx23.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
DECLARE_GLOBAL_DATA_PTR;
/*
* Functions
*/
int board_early_init_f(void)
{
/* IO0 clock at 480MHz */
mxs_set_ioclk(MXC_IOCLK0, 480000);
/* SSP0 clock at 96MHz */
mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
return 0;
}
int dram_init(void)
{
return mxs_dram_init();
}
#ifdef CONFIG_CMD_MMC
static int xfi3_mmc_cd(int id)
{
switch (id) {
case 0:
/* The SSP_DETECT is inverted on this board. */
return gpio_get_value(MX23_PAD_SSP1_DETECT__GPIO_2_1);
case 1:
/* Phison bridge always present */
return 1;
default:
return 0;
}
}
int board_mmc_init(bd_t *bis)
{
int ret;
/* MicroSD slot */
gpio_direction_input(MX23_PAD_SSP1_DETECT__GPIO_2_1);
gpio_direction_output(MX23_PAD_GPMI_D07__GPIO_0_7, 0);
ret = mxsmmc_initialize(bis, 0, NULL, xfi3_mmc_cd);
if (ret)
return ret;
/* Phison SD-NAND bridge */
ret = mxsmmc_initialize(bis, 1, NULL, xfi3_mmc_cd);
return ret;
}
#endif
#ifdef CONFIG_VIDEO_MXS
static int mxsfb_write_byte(uint32_t payload, const unsigned int data)
{
struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE;
const unsigned int timeout = 0x10000;
if (mxs_wait_mask_clr(&regs->hw_lcdif_ctrl_reg, LCDIF_CTRL_RUN,
timeout))
return -ETIMEDOUT;
writel((1 << LCDIF_TRANSFER_COUNT_V_COUNT_OFFSET) |
(1 << LCDIF_TRANSFER_COUNT_H_COUNT_OFFSET),
&regs->hw_lcdif_transfer_count);
writel(LCDIF_CTRL_DATA_SELECT | LCDIF_CTRL_RUN,
&regs->hw_lcdif_ctrl_clr);
if (data)
writel(LCDIF_CTRL_DATA_SELECT, &regs->hw_lcdif_ctrl_set);
writel(LCDIF_CTRL_RUN, &regs->hw_lcdif_ctrl_set);
if (mxs_wait_mask_clr(&regs->hw_lcdif_lcdif_stat_reg, 1 << 29,
timeout))
return -ETIMEDOUT;
writel(payload, &regs->hw_lcdif_data);
return mxs_wait_mask_clr(&regs->hw_lcdif_ctrl_reg, LCDIF_CTRL_RUN,
timeout);
}
static void mxsfb_write_register(uint32_t reg, uint32_t data)
{
mxsfb_write_byte(reg, 0);
mxsfb_write_byte(data, 1);
}
static const struct {
uint8_t reg;
uint8_t delay;
uint16_t val;
} lcd_regs[] = {
{ 0x01, 0, 0x001c },
{ 0x02, 0, 0x0100 },
/* Writing 0x30 to reg. 0x03 flips the LCD */
{ 0x03, 0, 0x1038 },
{ 0x08, 0, 0x0808 },
/* This can contain 0x111 to rotate the LCD. */
{ 0x0c, 0, 0x0000 },
{ 0x0f, 0, 0x0c01 },
{ 0x20, 0, 0x0000 },
{ 0x21, 30, 0x0000 },
/* Wait 30 mS here */
{ 0x10, 0, 0x0a00 },
{ 0x11, 30, 0x1038 },
/* Wait 30 mS here */
{ 0x12, 0, 0x1010 },
{ 0x13, 0, 0x0050 },
{ 0x14, 0, 0x4f58 },
{ 0x30, 0, 0x0000 },
{ 0x31, 0, 0x00db },
{ 0x32, 0, 0x0000 },
{ 0x33, 0, 0x0000 },
{ 0x34, 0, 0x00db },
{ 0x35, 0, 0x0000 },
{ 0x36, 0, 0x00af },
{ 0x37, 0, 0x0000 },
{ 0x38, 0, 0x00db },
{ 0x39, 0, 0x0000 },
{ 0x50, 0, 0x0000 },
{ 0x51, 0, 0x0705 },
{ 0x52, 0, 0x0e0a },
{ 0x53, 0, 0x0300 },
{ 0x54, 0, 0x0a0e },
{ 0x55, 0, 0x0507 },
{ 0x56, 0, 0x0000 },
{ 0x57, 0, 0x0003 },
{ 0x58, 0, 0x090a },
{ 0x59, 30, 0x0a09 },
/* Wait 30 mS here */
{ 0x07, 30, 0x1017 },
/* Wait 40 mS here */
{ 0x36, 0, 0x00af },
{ 0x37, 0, 0x0000 },
{ 0x38, 0, 0x00db },
{ 0x39, 0, 0x0000 },
{ 0x20, 0, 0x0000 },
{ 0x21, 0, 0x0000 },
};
void board_mxsfb_system_setup(void)
{
struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE;
int i;
/* Switch the LCDIF into System-Mode */
writel(LCDIF_CTRL_LCDIF_MASTER | LCDIF_CTRL_DOTCLK_MODE |
LCDIF_CTRL_BYPASS_COUNT, &regs->hw_lcdif_ctrl_clr);
/* Restart the SmartLCD controller */
mdelay(50);
writel(1, &regs->hw_lcdif_ctrl1_set);
mdelay(50);
writel(1, &regs->hw_lcdif_ctrl1_clr);
mdelay(50);
writel(1, &regs->hw_lcdif_ctrl1_set);
mdelay(50);
/* Program the SmartLCD controller */
writel(LCDIF_CTRL1_RECOVER_ON_UNDERFLOW, &regs->hw_lcdif_ctrl1_set);
writel((0x03 << LCDIF_TIMING_CMD_HOLD_OFFSET) |
(0x03 << LCDIF_TIMING_CMD_SETUP_OFFSET) |
(0x03 << LCDIF_TIMING_DATA_HOLD_OFFSET) |
(0x02 << LCDIF_TIMING_DATA_SETUP_OFFSET),
&regs->hw_lcdif_timing);
/*
* OTM2201A init and configuration sequence.
*/
for (i = 0; i < ARRAY_SIZE(lcd_regs); i++) {
mxsfb_write_register(lcd_regs[i].reg, lcd_regs[i].val);
if (lcd_regs[i].delay)
mdelay(lcd_regs[i].delay);
}
/* Turn on Framebuffer Upload Mode */
mxsfb_write_byte(0x22, 0);
writel(LCDIF_CTRL_LCDIF_MASTER | LCDIF_CTRL_DATA_SELECT,
&regs->hw_lcdif_ctrl_set);
}
#endif
int board_init(void)
{
/* Adress of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
/* Turn on PWM backlight */
gpio_direction_output(MX23_PAD_PWM2__GPIO_1_28, 1);
return 0;
}
int board_eth_init(bd_t *bis)
{
usb_eth_initialize(bis);
return 0;
}

@ -206,6 +206,7 @@ mx28evk arm arm926ejs mx28evk freesca
mx28evk_nand arm arm926ejs mx28evk freescale mxs mx28evk:ENV_IS_IN_NAND
mx28evk_auart_console arm arm926ejs mx28evk freescale mxs mx28evk:MXS_AUART,MXS_AUART_BASE=MXS_UARTAPP3_BASE,ENV_IS_IN_MMC
sc_sps_1 arm arm926ejs sc_sps_1 schulercontrol mxs
xfi3 arm arm926ejs xfi3 creative mxs xfi3
nhk8815 arm arm926ejs nhk8815 st nomadik
nhk8815_onenand arm arm926ejs nhk8815 st nomadik nhk8815:BOOT_ONENAND
omap5912osk arm arm926ejs - ti omap

@ -0,0 +1,69 @@
/*
* Copyright (C) 2013 Marek Vasut <marex@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIGS_XFI3_H__
#define __CONFIGS_XFI3_H__
/* System configurations */
#define CONFIG_MX23 /* i.MX23 SoC */
/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH
#include <config_cmd_default.h>
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_GPIO
#define CONFIG_CMD_MMC
#define CONFIG_CMD_PING
#define CONFIG_CMD_USB
#define CONFIG_VIDEO
/* Memory configuration */
#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
#define PHYS_SDRAM_1 0x40000000 /* Base address */
#define PHYS_SDRAM_1_SIZE 0x08000000 /* Max 128 MB RAM */
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
/* Environment */
#define CONFIG_ENV_SIZE (16 * 1024)
#define CONFIG_ENV_IS_NOWHERE
#define CONFIG_ENV_OVERWRITE
/* Booting Linux */
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTFILE "uImage"
#define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 "
#define CONFIG_LOADADDR 0x42000000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
/* LCD */
#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_FONT_4X6
#define CONFIG_VIDEO_MXS_MODE_SYSTEM
#define CONFIG_SYS_BLACK_IN_WRITE
#define LCD_BPP LCD_COLOR16
#endif
/* USB */
#ifdef CONFIG_CMD_USB
#define CONFIG_EHCI_MXS_PORT0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#define CONFIG_MV_UDC /* ChipIdea CI13xxx UDC */
#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_CDC
#define CONFIG_NETCONSOLE
#endif
/* The rest of the configuration is shared */
#include <configs/mxs.h>
#endif /* __CONFIGS_XFI3_H__ */
Loading…
Cancel
Save