Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

arm: Remove imx27lite, imx27_litekit and magnesium boards

Browse Source 
These boards have not been converted to generic board by the deadline.
Remove them.

Signed-off-by: Simon Glass <sjg@chromium.org>
master
Simon Glass 10 years ago committed by Tom Rini
parent 3eb8f58d75
commit bc0840bcb7
10 changed files with 0 additions and 407 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 9
      arch/arm/Kconfig
  2. 31
      board/logicpd/imx27lite/Kconfig
  3. 12
      board/logicpd/imx27lite/MAINTAINERS
  4. 9
      board/logicpd/imx27lite/Makefile
  5. 77
      board/logicpd/imx27lite/imx27lite.c
  6. 156
      board/logicpd/imx27lite/lowlevel_init.S
  7. 3
      configs/imx27lite_defconfig
  8. 3
      configs/magnesium_defconfig
  9. 49
      include/configs/imx27lite.h
  10. 58
      include/configs/magnesium.h

9
arch/arm/Kconfig
Unescape View File

@ -152,14 +152,6 @@ config TARGET_APF27
select CPU_ARM926EJS
select SUPPORT_SPL
config TARGET_IMX27LITE
bool "Support imx27lite"
select CPU_ARM926EJS
config TARGET_MAGNESIUM
bool "Support magnesium"
select CPU_ARM926EJS
config TARGET_APX4DEVKIT
bool "Support apx4devkit"
select CPU_ARM926EJS
@ -831,7 +823,6 @@ source "board/imx31_phycore/Kconfig"
source "board/isee/igep0033/Kconfig"
source "board/jornada/Kconfig"
source "board/karo/tx25/Kconfig"
source "board/logicpd/imx27lite/Kconfig"
source "board/logicpd/imx31_litekit/Kconfig"
source "board/maxbcm/Kconfig"
source "board/mpl/vcma9/Kconfig"

31
board/logicpd/imx27lite/Kconfig
Unescape View File

@ -1,31 +0,0 @@
if TARGET_IMX27LITE
config SYS_BOARD
default "imx27lite"
config SYS_VENDOR
default "logicpd"
config SYS_SOC
default "mx27"
config SYS_CONFIG_NAME
default "imx27lite"
endif
if TARGET_MAGNESIUM
config SYS_BOARD
default "imx27lite"
config SYS_VENDOR
default "logicpd"
config SYS_SOC
default "mx27"
config SYS_CONFIG_NAME
default "magnesium"
endif

12
board/logicpd/imx27lite/MAINTAINERS
Unescape View File

@ -1,12 +0,0 @@
IMX27LITE BOARD
M: Wolfgang Denk <wd@denx.de>
S: Maintained
F: board/logicpd/imx27lite/
F: include/configs/imx27lite.h
F: configs/imx27lite_defconfig
MAGNESIUM BOARD
M: Heiko Schocher <hs@denx.de>
S: Maintained
F: include/configs/magnesium.h
F: configs/magnesium_defconfig

9
board/logicpd/imx27lite/Makefile
Unescape View File

@ -1,9 +0,0 @@
#
# (C) Copyright 2000-2004
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-y := imx27lite.o
obj-y += lowlevel_init.o

77
board/logicpd/imx27lite/imx27lite.c
Unescape View File

@ -1,77 +0,0 @@
/*
* Copyright (C) 2007 Sascha Hauer, Pengutronix
* Copyright (C) 2008,2009 Eric Jarrige <jorasse@users.sourceforge.net>
* Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/gpio.h>
DECLARE_GLOBAL_DATA_PTR;
int board_init(void)
{
#if defined(CONFIG_SYS_NAND_LARGEPAGE)
struct system_control_regs *sc_regs =
(struct system_control_regs *)IMX_SYSTEM_CTL_BASE;
#endif
gd->bd->bi_arch_number = MACH_TYPE_IMX27LITE;
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
#ifdef CONFIG_MXC_UART
mx27_uart1_init_pins();
#endif
#ifdef CONFIG_FEC_MXC
mx27_fec_init_pins();
imx_gpio_mode((GPIO_PORTC | GPIO_OUT | GPIO_PUEN | GPIO_GPIO | 31));
gpio_set_value(GPIO_PORTC | 31, 1);
#endif
#ifdef CONFIG_MXC_MMC
#if defined(CONFIG_MAGNESIUM)
mx27_sd1_init_pins();
#else
mx27_sd2_init_pins();
#endif
#endif
#if defined(CONFIG_SYS_NAND_LARGEPAGE)
/*
* set in FMCR NF_FMS Bit(5) to 1
* (NAND Flash with 2 Kbyte page size)
*/
writel(readl(&sc_regs->fmcr) | (1 << 5), &sc_regs->fmcr);
#endif
return 0;
}
int dram_init(void)
{
/* dram_init must store complete ramsize in gd->ram_size */
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
PHYS_SDRAM_1_SIZE);
return 0;
}
void dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_dram[0].size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
PHYS_SDRAM_1_SIZE);
#if CONFIG_NR_DRAM_BANKS > 1
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
gd->bd->bi_dram[1].size = get_ram_size((void *)PHYS_SDRAM_2,
PHYS_SDRAM_2_SIZE);
#endif
}
int checkboard(void)
{
puts("Board: ");
puts(CONFIG_BOARDNAME);
return 0;
}

156
board/logicpd/imx27lite/lowlevel_init.S
Unescape View File

@ -1,156 +0,0 @@
/*
* For clock initialization, see chapter 3 of the "MCIMX27 Multimedia
* Applications Processor Reference Manual, Rev. 0.2".
*
* (C) Copyright 2008 Eric Jarrige <eric.jarrige@armadeus.org>
* (C) Copyright 2009 Ilya Yanok <yanok@emcraft.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <config.h>
#include <asm/macro.h>
#include <asm/arch/imx-regs.h>
#include <generated/asm-offsets.h>
SOC_ESDCTL_BASE_W: .word IMX_ESD_BASE
SOC_SI_ID_REG_W: .word IMX_SYSTEM_CTL_BASE
SDRAM_ESDCFG_T1_W: .word SDRAM_ESDCFG_REGISTER_VAL(0)
SDRAM_ESDCFG_T2_W: .word SDRAM_ESDCFG_REGISTER_VAL(3)
SDRAM_PRECHARGE_CMD_W: .word (ESDCTL_SDE | ESDCTL_SMODE_PRECHARGE | \
ESDCTL_ROW13 | ESDCTL_COL10)
SDRAM_AUTOREF_CMD_W: .word (ESDCTL_SDE | ESDCTL_SMODE_AUTO_REF | \
ESDCTL_ROW13 | ESDCTL_COL10)
SDRAM_LOADMODE_CMD_W: .word (ESDCTL_SDE | ESDCTL_SMODE_LOAD_MODE | \
ESDCTL_ROW13 | ESDCTL_COL10)
SDRAM_NORMAL_CMD_W: .word SDRAM_ESDCTL_REGISTER_VAL
.macro init_aipi
/*
* setup AIPI1 and AIPI2
*/
write32 AIPI1_PSR0, AIPI1_PSR0_VAL
write32 AIPI1_PSR1, AIPI1_PSR1_VAL
write32 AIPI2_PSR0, AIPI2_PSR0_VAL
write32 AIPI2_PSR1, AIPI2_PSR1_VAL
.endm /* init_aipi */
.macro init_clock
ldr r0, =CSCR
/* disable MPLL/SPLL first */
ldr r1, [r0]
bic r1, r1, #(CSCR_MPEN|CSCR_SPEN)
str r1, [r0]
write32 MPCTL0, MPCTL0_VAL
write32 SPCTL0, SPCTL0_VAL
write32 CSCR, CSCR_VAL | CSCR_MPLL_RESTART | CSCR_SPLL_RESTART
/*
* add some delay here
*/
wait_timer 0x1000
/* peripheral clock divider */
write32 PCDR0, PCDR0_VAL
write32 PCDR1, PCDR1_VAL
/* Configure PCCR0 and PCCR1 */
write32 PCCR0, PCCR0_VAL
write32 PCCR1, PCCR1_VAL
.endm /* init_clock */
.macro sdram_init
ldr r0, SOC_ESDCTL_BASE_W
mov r2, #PHYS_SDRAM_1
/* Do initial reset */
mov r1, #ESDMISC_MDDR_DL_RST
str r1, [r0, #ESDMISC_ROF]
/* Hold for more than 200ns */
wait_timer 0x10000
/* Activate LPDDR iface */
mov r1, #ESDMISC_MDDREN
str r1, [r0, #ESDMISC_ROF]
/* Check The chip version TO1 or TO2 */
ldr r1, SOC_SI_ID_REG_W
ldr r1, [r1]
ands r1, r1, #0xF0000000
/* add Latency on CAS only for TO2 */
ldreq r1, SDRAM_ESDCFG_T2_W
ldrne r1, SDRAM_ESDCFG_T1_W
str r1, [r0, #ESDCFG0_ROF]
/* Run initialization sequence */
ldr r1, SDRAM_PRECHARGE_CMD_W
str r1, [r0, #ESDCTL0_ROF]
ldr r1, [r2, #SDRAM_ALL_VAL]
ldr r1, SDRAM_AUTOREF_CMD_W
str r1, [r0, #ESDCTL0_ROF]
ldr r1, [r2, #SDRAM_ALL_VAL]
ldr r1, [r2, #SDRAM_ALL_VAL]
ldr r1, SDRAM_LOADMODE_CMD_W
str r1, [r0, #ESDCTL0_ROF]
ldrb r1, [r2, #SDRAM_MODE_REGISTER_VAL]
add r3, r2, #SDRAM_EXT_MODE_REGISTER_VAL
ldrb r1, [r3]
ldr r1, SDRAM_NORMAL_CMD_W
str r1, [r0, #ESDCTL0_ROF]
#if (CONFIG_NR_DRAM_BANKS > 1)
/* 2nd sdram */
mov r2, #PHYS_SDRAM_2
/* Check The chip version TO1 or TO2 */
ldr r1, SOC_SI_ID_REG_W
ldr r1, [r1]
ands r1, r1, #0xF0000000
/* add Latency on CAS only for TO2 */
ldreq r1, SDRAM_ESDCFG_T2_W
ldrne r1, SDRAM_ESDCFG_T1_W
str r1, [r0, #ESDCFG1_ROF]
/* Run initialization sequence */
ldr r1, SDRAM_PRECHARGE_CMD_W
str r1, [r0, #ESDCTL1_ROF]
ldr r1, [r2, #SDRAM_ALL_VAL]
ldr r1, SDRAM_AUTOREF_CMD_W
str r1, [r0, #ESDCTL1_ROF]
ldr r1, [r2, #SDRAM_ALL_VAL]
ldr r1, [r2, #SDRAM_ALL_VAL]
ldr r1, SDRAM_LOADMODE_CMD_W
str r1, [r0, #ESDCTL1_ROF]
ldrb r1, [r2, #SDRAM_MODE_REGISTER_VAL]
add r3, r2, #SDRAM_EXT_MODE_REGISTER_VAL
ldrb r1, [r3]
ldr r1, SDRAM_NORMAL_CMD_W
str r1, [r0, #ESDCTL1_ROF]
#endif /* CONFIG_NR_DRAM_BANKS > 1 */
.endm /* sdram_init */
.globl lowlevel_init
lowlevel_init:
mov r10, lr
init_aipi
init_clock
sdram_init
mov pc,r10

3
configs/imx27lite_defconfig
Unescape View File

@ -1,3 +0,0 @@
CONFIG_ARM=y
CONFIG_TARGET_IMX27LITE=y
# CONFIG_CMD_SETEXPR is not set

3
configs/magnesium_defconfig
Unescape View File

@ -1,3 +0,0 @@
CONFIG_ARM=y
CONFIG_TARGET_MAGNESIUM=y
# CONFIG_CMD_SETEXPR is not set

49
include/configs/imx27lite.h
Unescape View File

@ -1,49 +0,0 @@
/*
* Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/* include common defines/options for all imx27lite related boards */
#include "imx27lite-common.h"
/*
* SoC Configuration
*/
#define CONFIG_IMX27LITE
#define CONFIG_HOSTNAME imx27
#define CONFIG_BOARDNAME "LogicPD imx27lite\n"
/*
* Flash & Environment
*/
#define CONFIG_SYS_FLASH_SECT_SZ 0x2000 /* 8KB sect size Intel Flash */
#define CONFIG_ENV_OFFSET (PHYS_FLASH_SIZE - 0x20000)
#define PHYS_FLASH_SIZE 0x200000
#define CONFIG_ENV_SECT_SIZE 0x10000 /* Env sector Size */
/*
* SD/MMC
*/
#define CONFIG_MXC_MCI_REGS_BASE 0x10014000
/*
* MTD partitions
*/
#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=mxc_nand.0"
#define MTDPARTS_DEFAULT \
"mtdparts=" \
"physmap-flash.0:" \
"256k(U-Boot)," \
"1664k(user)," \
"64k(env1)," \
"64k(env2);" \
"mxc_nand.0:" \
"128k(IPL-SPL)," \
"4m(kernel)," \
"22m(rootfs)," \
"-(userfs)"
#endif /* __CONFIG_H */

58
include/configs/magnesium.h
Unescape View File

@ -1,58 +0,0 @@
/*
* Copyright (C) 2010 Heiko Schocher <hs@denx.de>
*
* based on:
* Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/* include common defines/options for all imx27lite related boards */
#include "imx27lite-common.h"
/*
* SoC Configuration
*/
#define CONFIG_MAGNESIUM
#define CONFIG_HOSTNAME magnesium
#define CONFIG_BOARDNAME "Projectiondesign magnesium\n"
/*
* Flash & Environment
*/
#define CONFIG_SYS_FLASH_SECT_SZ 0x8000 /* 64KB sect size */
#define CONFIG_ENV_OFFSET (PHYS_FLASH_SIZE - 0x40000)
#define PHYS_FLASH_SIZE 0x800000
#define CONFIG_ENV_SECT_SIZE 0x20000 /* Env sector Size */
/*
* NAND
*/
#define CONFIG_SYS_NAND_LARGEPAGE
/*
* SD/MMC
*/
#define CONFIG_MXC_MCI_REGS_BASE 0x10013000
/*
* MTD partitions
*/
#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=mxc_nand.0"
#define MTDPARTS_DEFAULT \
"mtdparts=" \
"physmap-flash.0:" \
"256k(U-Boot)," \
"7680k(user)," \
"128k(env1)," \
"128k(env2);" \
"mxc_nand.0:" \
"128k(IPL-SPL)," \
"4m(kernel)," \
"22m(rootfs)," \
"-(userfs)"
#endif /* __CONFIG_H */
Write Preview
Loading…
Cancel
Save