* Patch by Yuli Barcohen, 4 Mar 2004:

Fix problems with GCC 3.3.x which changed handling of global
  variables explicitly initialized to zero (now in .bss instead of
  .data as before).

* Patch by Leon Kukovec, 02 Mar 2004:
  add strswab() to fix IDE LBA capacity, firmware and model numbers
  on little endian machines

* Patch by Masami Komiya, 02 Mar 2004:
  - Remove get_ticks() from NFS code
  - Add verification of RPC transaction ID

* Patch by Pierre Aubert, 02 Mar 2004:
  cleanup for IDE and USB drivers for MPC5200
master
wdenk 21 years ago
parent 0e6d798cb3
commit c3f9d4939a
  1. 18
      CHANGELOG
  2. 25
      board/icecube/icecube.c
  3. 22
      common/cmd_ide.c
  4. 66
      common/env_flash.c
  5. 24
      cpu/mpc5xxx/ide.c
  6. 8
      cpu/mpc5xxx/usb_ohci.c
  7. 73
      doc/README.ocotea
  8. 7
      include/configs/IceCube.h
  9. 3
      include/linux/string.h
  10. 27
      lib_generic/string.c
  11. 35
      net/nfs.c

@ -2,7 +2,23 @@
Changes for U-Boot 1.0.2:
======================================================================
* Patch by Travis Sawye, 01 Mar 2004:
* Patch by Yuli Barcohen, 4 Mar 2004:
Fix problems with GCC 3.3.x which changed handling of global
variables explicitly initialized to zero (now in .bss instead of
.data as before).
* Patch by Leon Kukovec, 02 Mar 2004:
add strswab() to fix IDE LBA capacity, firmware and model numbers
on little endian machines
* Patch by Masami Komiya, 02 Mar 2004:
- Remove get_ticks() from NFS code
- Add verification of RPC transaction ID
* Patch by Pierre Aubert, 02 Mar 2004:
cleanup for IDE and USB drivers for MPC5200
* Patch by Travis Sawyer, 01 Mar 2004:
Ocotea:
- Add IBM PPC440GX Ref Platform support (Ocotea)
Original code by Paul Reynolds <PaulReynolds@lhsolutions.com>

@ -207,3 +207,28 @@ void pci_init_board(void)
pci_mpc5xxx_init(&hose);
}
#endif
#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
#define GPIO_PSC1_4 0x01000000ul
void init_ide_reset (void)
{
printf ("init_ide_reset\n");
/* Configure PSC1_4 as GPIO output for ATA reset */
*(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4;
*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4;
}
void ide_set_reset (int idereset)
{
printf ("ide_reset(%d)\n", idereset);
if (idereset) {
*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
} else {
*(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4;
}
}
#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */

@ -1094,6 +1094,18 @@ static void ide_ident (block_dev_desc_t *dev_desc)
ident_cpy (dev_desc->revision, iop->fw_rev, sizeof(dev_desc->revision));
ident_cpy (dev_desc->vendor, iop->model, sizeof(dev_desc->vendor));
ident_cpy (dev_desc->product, iop->serial_no, sizeof(dev_desc->product));
#ifdef __LITTLE_ENDIAN
/*
* firmware revision and model number have Big Endian Byte
* order in Word. Convert both to little endian.
*
* See CF+ and CompactFlash Specification Revision 2.0:
* 6.2.1.6: Identfy Drive, Table 39 for more details
*/
strswab (dev_desc->revision);
strswab (dev_desc->vendor);
#endif /* __LITTLE_ENDIAN */
if ((iop->config & 0x0080)==0x0080)
dev_desc->removable = 1;
@ -1135,8 +1147,18 @@ static void ide_ident (block_dev_desc_t *dev_desc)
}
#endif /* CONFIG_ATAPI */
#ifdef __BIG_ENDIAN
/* swap shorts */
dev_desc->lba = (iop->lba_capacity << 16) | (iop->lba_capacity >> 16);
#else /* ! __BIG_ENDIAN */
/*
* do not swap shorts on little endian
*
* See CF+ and CompactFlash Specification Revision 2.0:
* 6.2.1.6: Identfy Drive, Table 39, Word Address 57-58 for details.
*/
dev_desc->lba = iop->lba_capacity;
#endif /* __BIG_ENDIAN */
#if CONFIG_LBA48
if (iop->command_set_2 & 0x0400) { /* LBA 48 support */

@ -79,9 +79,9 @@ static env_t *flash_addr_new = (env_t *)CFG_ENV_ADDR_REDUND;
static ulong end_addr = CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1;
static ulong end_addr_new = CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1;
static uchar active_flag = 1;
static uchar obsolete_flag = 0;
#endif
#define ACTIVE_FLAG 1
#define OBSOLETE_FLAG 0
#endif /* CFG_ENV_ADDR_REDUND */
extern uchar default_environment[];
extern int default_environment_size;
@ -112,43 +112,28 @@ int env_init(void)
ulong addr1 = (ulong)&(flash_addr->data);
ulong addr2 = (ulong)&(flash_addr_new->data);
if (crc1_ok && ! crc2_ok)
{
if (crc1_ok && ! crc2_ok) {
gd->env_addr = addr1;
gd->env_valid = 1;
}
else if (! crc1_ok && crc2_ok)
{
} else if (! crc1_ok && crc2_ok) {
gd->env_addr = addr2;
gd->env_valid = 1;
}
else if (! crc1_ok && ! crc2_ok)
{
} else if (! crc1_ok && ! crc2_ok) {
gd->env_addr = addr_default;
gd->env_valid = 0;
}
else if (flag1 == active_flag && flag2 == obsolete_flag)
{
} else if (flag1 == ACTIVE_FLAG && flag2 == OBSOLETE_FLAG) {
gd->env_addr = addr1;
gd->env_valid = 1;
}
else if (flag1 == obsolete_flag && flag2 == active_flag)
{
} else if (flag1 == OBSOLETE_FLAG && flag2 == ACTIVE_FLAG) {
gd->env_addr = addr2;
gd->env_valid = 1;
}
else if (flag1 == flag2)
{
} else if (flag1 == flag2) {
gd->env_addr = addr1;
gd->env_valid = 2;
}
else if (flag1 == 0xFF)
{
} else if (flag1 == 0xFF) {
gd->env_addr = addr1;
gd->env_valid = 2;
}
else if (flag2 == 0xFF)
{
} else if (flag2 == 0xFF) {
gd->env_addr = addr2;
gd->env_valid = 2;
}
@ -161,6 +146,7 @@ int saveenv(void)
{
char *saved_data = NULL;
int rc = 1;
char flag = OBSOLETE_FLAG, new_flag = ACTIVE_FLAG;
#if CFG_ENV_SECT_SIZE > CFG_ENV_SIZE
ulong up_data = 0;
#endif
@ -210,16 +196,13 @@ int saveenv(void)
if ((rc = flash_write(env_ptr->data,
(ulong)&(flash_addr_new->data),
sizeof(env_ptr->data))) ||
(rc = flash_write((char *)&(env_ptr->crc),
(ulong)&(flash_addr_new->crc),
sizeof(env_ptr->crc))) ||
(rc = flash_write((char *)&obsolete_flag,
(rc = flash_write(&flag,
(ulong)&(flash_addr->flags),
sizeof(flash_addr->flags))) ||
(rc = flash_write((char *)&active_flag,
(rc = flash_write(&new_flag,
(ulong)&(flash_addr_new->flags),
sizeof(flash_addr_new->flags))))
{
@ -361,8 +344,7 @@ void env_relocate_spec (void)
#ifdef CFG_ENV_ADDR_REDUND
DECLARE_GLOBAL_DATA_PTR;
if (gd->env_addr != (ulong)&(flash_addr->data))
{
if (gd->env_addr != (ulong)&(flash_addr->data)) {
env_t * etmp = flash_addr;
ulong ltmp = end_addr;
@ -373,24 +355,26 @@ void env_relocate_spec (void)
end_addr_new = ltmp;
}
if (flash_addr_new->flags != obsolete_flag &&
if (flash_addr_new->flags != OBSOLETE_FLAG &&
crc32(0, flash_addr_new->data, ENV_SIZE) ==
flash_addr_new->crc)
{
flash_addr_new->crc) {
char flag = OBSOLETE_FLAG;
gd->env_valid = 2;
flash_sect_protect (0, (ulong)flash_addr_new, end_addr_new);
flash_write((char *)&obsolete_flag,
flash_write(&flag,
(ulong)&(flash_addr_new->flags),
sizeof(flash_addr_new->flags));
flash_sect_protect (1, (ulong)flash_addr_new, end_addr_new);
}
if (flash_addr->flags != active_flag &&
(flash_addr->flags & active_flag) == active_flag)
{
if (flash_addr->flags != ACTIVE_FLAG &&
(flash_addr->flags & ACTIVE_FLAG) == ACTIVE_FLAG) {
char flag = ACTIVE_FLAG;
gd->env_valid = 2;
flash_sect_protect (0, (ulong)flash_addr, end_addr);
flash_write((char *)&active_flag,
flash_write(&flag,
(ulong)&(flash_addr->flags),
sizeof(flash_addr->flags));
flash_sect_protect (1, (ulong)flash_addr, end_addr);

@ -29,7 +29,9 @@
#define CALC_TIMING(t) (t + period - 1) / period
#define GPIO_PSC1_4 0x01000000ul
#ifdef CONFIG_IDE_RESET
extern void init_ide_reset (void);
#endif
int ide_preinit (void)
{
@ -70,24 +72,10 @@ int ide_preinit (void)
*(vu_long *) MPC5XXX_ATA_PIO2 = reg;
#if defined (CONFIG_ICECUBE) && defined (CONFIG_IDE_RESET)
/* Configure PSC1_4 as GPIO output for ATA reset */
*(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4;
*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4;
#endif /* defined (CONFIG_ICECUBE) && defined (CONFIG_IDE_RESET) */
#ifdef CONFIG_IDE_RESET
init_ide_reset ();
#endif /* CONFIG_IDE_RESET */
return (0);
}
#if defined (CONFIG_ICECUBE) && defined (CONFIG_IDE_RESET)
void ide_set_reset (int idereset)
{
if (idereset) {
*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
} else {
*(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4;
}
}
#endif /* defined (CONFIG_ICECUBE) && defined (CONFIG_IDE_RESET) */
#endif /* CFG_CMD_IDE */

@ -1532,10 +1532,12 @@ int usb_lowlevel_init(void)
{
/* Set the USB Clock */
*(vu_long *)MPC5XXX_CDM_48_FDC = 0x0001bbbb;
*(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~0x00800000;
*(vu_long *)MPC5XXX_CDM_48_FDC = CONFIG_USB_CDMFDC5xxx;
/* remove all USB bits first before ORing in ours */
*(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~0x00807000;
/* Activate USB port */
*(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= 0x00001000;
*(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= CONFIG_USB_GPSCFG5xxx;
memset (&gohci, 0, sizeof (ohci_t));
memset (&urb_priv, 0, sizeof (urb_priv_t));

@ -0,0 +1,73 @@
IBM Ocotea Board
Last Update: March 2, 2004
=======================================================================
This file contains some handy info regarding U-Boot and the IBM
Ocotea 440gx evalutation board. See the README.ppc440 for additional
information.
SWITCH SETTINGS & JUMPERS
==========================
Here's what I've been using successfully. If you feel inclined to
change things ... please read the docs!
DIPSW U46 U80
------------------------
SW 1 off off
SW 2 on off
SW 3 off off
SW 4 off off
SW 5 off off
SW 6 on on
SW 7 on off
SW 8 on off
J41: strapped
J42: open
All others are factory default.
I2C Information
=====================
See README.ebony for information.
PCI
===========================
Untested at the time of writing.
PPC440GX Ethernet EMACs
===========================
All EMAC ports have been tested and are known to work
with EPS Group 4.
Special note about the Cicada CIS8201:
The CIS8201 Gigabit PHY comes up in GMII mode by default.
One must hit an extended register to allow use of RGMII mode.
This has been done in the 440gx_enet.c file with a #ifdef/endif
pair.
IBM does not store the EMAC ethernet addresses within their PIBS bootloader.
The addresses contained in the config header file are from my particular
board and you _*should*_ change them to reflect your board either in the
config file and/or in your environment variables. I found the addresses on
labels on the bottom side of the board.
BDI2k or JTAG Debugging
===========================
For ease of debugging you can swap the small boot flash and external SRAM
by changing U46:3 to on. You can then use the sram as your boot flash by
loading the sram via the jtag debugger.
Regards,
--Travis
<tsawyer@sandburst.com>

@ -302,6 +302,13 @@
#define CFG_RESET_ADDRESS 0xff000000
/*-----------------------------------------------------------------------
* USB stuff
*-----------------------------------------------------------------------
*/
#define CONFIG_USB_CDMFDC5xxx 0x0001BBBB
#define CONFIG_USB_GPSCFG5xxx 0x00001000
/*-----------------------------------------------------------------------
* IDE/ATA stuff Supports IDE harddisk
*-----------------------------------------------------------------------
*/

@ -59,6 +59,9 @@ extern __kernel_size_t strnlen(const char *,__kernel_size_t);
#ifndef __HAVE_ARCH_STRDUP
extern char * strdup(const char *);
#endif
#ifdef __HAVE_ARCH_STRSWAB
extern char * strswab(const char *);
#endif
#ifndef __HAVE_ARCH_MEMSET
extern void * memset(void *,int,__kernel_size_t);

@ -364,6 +364,33 @@ char * strsep(char **s, const char *ct)
}
#endif
#ifndef __HAVE_ARCH_STRSWAB
/**
* strswab - swap adjacent even and odd bytes in %NUL-terminated string
* s: address of the string
*
* returns the address of the swapped string or NULL on error. If
* string length is odd, last byte is untouched.
*/
char *strswab(const char *s)
{
char *p;
if ((NULL == s) || ('\0' == *s)) {
return (NULL);
}
for (p = ((char *)s + 1); '\0' != *p; p += 2) {
char tmp;
tmp = *(p-1);
*(p-1) = *p;
*p = tmp;
}
return (char *) s;
}
#endif
#ifndef __HAVE_ARCH_MEMSET
/**
* memset - Fill a region of memory with the given value

@ -37,7 +37,7 @@
#define NFS_TIMEOUT 10
static int fs_mounted = 0;
static unsigned long rpc_id;
static unsigned long rpc_id = 0;
static int nfs_offset = -1;
static int nfs_len;
@ -123,17 +123,6 @@ dirname (char *path)
}
/**************************************************************************
RPC_INIT - set up the ID counter to something fairly random
**************************************************************************/
static void
rpc_init (void)
{
unsigned long t;
t=get_ticks();
rpc_id = t ^ (t << 8) ^ (t << 16);
}
/**************************************************************************
RPC_ADD_CREDENTIALS - Add RPC authentication/verifier entries
**************************************************************************/
static long *rpc_add_credentials (long *p)
@ -189,7 +178,7 @@ rpc_req (int rpc_prog, int rpc_proc, uint32_t *data, int datalen)
int pktlen;
int sport;
id = rpc_id++;
id = ++rpc_id;
pkt.u.call.id = htonl(id);
pkt.u.call.type = htonl(MSG_CALL);
pkt.u.call.rpcvers = htonl(2); /* use RPC version 2 */
@ -410,10 +399,14 @@ rpc_lookup_reply (int prog, uchar *pkt, unsigned len)
printf ("%s\n", __FUNCTION__);
#endif
if (ntohl(rpc_pkt.u.reply.id) != rpc_id)
return -1;
if (rpc_pkt.u.reply.rstatus ||
rpc_pkt.u.reply.verifier ||
rpc_pkt.u.reply.astatus ||
rpc_pkt.u.reply.astatus) {
return -1;
}
switch (prog) {
@ -439,6 +432,9 @@ nfs_mount_reply (uchar *pkt, unsigned len)
memcpy ((unsigned char *)&rpc_pkt, pkt, len);
if (ntohl(rpc_pkt.u.reply.id) != rpc_id)
return -1;
if (rpc_pkt.u.reply.rstatus ||
rpc_pkt.u.reply.verifier ||
rpc_pkt.u.reply.astatus ||
@ -463,6 +459,9 @@ nfs_umountall_reply (uchar *pkt, unsigned len)
memcpy ((unsigned char *)&rpc_pkt, pkt, len);
if (ntohl(rpc_pkt.u.reply.id) != rpc_id)
return -1;
if (rpc_pkt.u.reply.rstatus ||
rpc_pkt.u.reply.verifier ||
rpc_pkt.u.reply.astatus) {
@ -486,6 +485,9 @@ nfs_lookup_reply (uchar *pkt, unsigned len)
memcpy ((unsigned char *)&rpc_pkt, pkt, len);
if (ntohl(rpc_pkt.u.reply.id) != rpc_id)
return -1;
if (rpc_pkt.u.reply.rstatus ||
rpc_pkt.u.reply.verifier ||
rpc_pkt.u.reply.astatus ||
@ -510,6 +512,9 @@ nfs_readlink_reply (uchar *pkt, unsigned len)
memcpy ((unsigned char *)&rpc_pkt, pkt, len);
if (ntohl(rpc_pkt.u.reply.id) != rpc_id)
return -1;
if (rpc_pkt.u.reply.rstatus ||
rpc_pkt.u.reply.verifier ||
rpc_pkt.u.reply.astatus ||
@ -544,6 +549,9 @@ nfs_read_reply (uchar *pkt, unsigned len)
memcpy ((uchar *)&rpc_pkt, pkt, sizeof(rpc_pkt.u.reply));
if (ntohl(rpc_pkt.u.reply.id) != rpc_id)
return -1;
if (rpc_pkt.u.reply.rstatus ||
rpc_pkt.u.reply.verifier ||
rpc_pkt.u.reply.astatus ||
@ -755,7 +763,6 @@ NfsStart (void)
NetSetTimeout (NFS_TIMEOUT * CFG_HZ, NfsTimeout);
NetSetHandler (NfsHandler);
rpc_init ();
NfsTimeoutCount = 0;
NfsState = STATE_PRCLOOKUP_PROG_MOUNT_REQ;

Loading…
Cancel
Save