arm: vf610: Add QSPI support for VF610TWR

Add QSPI support for VF610TWR, such as clock and iomux.

Signed-off-by: Alison Wang <Huan.Wang@freescale.com>
Signed-off-by: Chao Fu <b44548@freescale.com>

arch/arm/include/asm/arch-vf610/crm_regs.h

@@ -1,5 +1,5 @@
 /*
- * Copyright 2013 Freescale Semiconductor, Inc.
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -150,6 +150,9 @@ struct anadig_reg {
 #define CCM_CACRR_ARM_CLK_DIV_MASK		0x7
 #define CCM_CACRR_ARM_CLK_DIV(v)		((v) & 0x7)
 
+#define CCM_CSCMR1_QSPI0_CLK_SEL_OFFSET		22
+#define CCM_CSCMR1_QSPI0_CLK_SEL_MASK		(0x3 << 22)
+#define CCM_CSCMR1_QSPI0_CLK_SEL(v)		(((v) & 0x3) << 22)
 #define CCM_CSCMR1_ESDHC1_CLK_SEL_OFFSET	18
 #define CCM_CSCMR1_ESDHC1_CLK_SEL_MASK		(0x3 << 18)
 #define CCM_CSCMR1_ESDHC1_CLK_SEL(v)		(((v) & 0x3) << 18)
@@ -161,6 +164,11 @@ struct anadig_reg {
 #define CCM_CSCDR2_ESDHC1_CLK_DIV_MASK		(0xf << 20)
 #define CCM_CSCDR2_ESDHC1_CLK_DIV(v)		(((v) & 0xf) << 20)
 
+#define CCM_CSCDR3_QSPI0_EN			(1 << 4)
+#define CCM_CSCDR3_QSPI0_DIV(v)			((v) << 3)
+#define CCM_CSCDR3_QSPI0_X2_DIV(v)		((v) << 2)
+#define CCM_CSCDR3_QSPI0_X4_DIV(v)		((v) & 0x3)
+
 #define CCM_CSCMR2_RMII_CLK_SEL_OFFSET		4
 #define CCM_CSCMR2_RMII_CLK_SEL_MASK		(0x3 << 4)
 #define CCM_CSCMR2_RMII_CLK_SEL(v)		(((v) & 0x3) << 4)
@@ -170,6 +178,7 @@ struct anadig_reg {
 #define CCM_CCGR0_UART1_CTRL_MASK		(0x3 << 16)
 #define CCM_CCGR1_PIT_CTRL_MASK			(0x3 << 14)
 #define CCM_CCGR1_WDOGA5_CTRL_MASK		(0x3 << 28)
+#define CCM_CCGR2_QSPI0_CTRL_MASK		(0x3 << 8)
 #define CCM_CCGR2_IOMUXC_CTRL_MASK		(0x3 << 16)
 #define CCM_CCGR2_PORTA_CTRL_MASK		(0x3 << 18)
 #define CCM_CCGR2_PORTB_CTRL_MASK		(0x3 << 20)

arch/arm/include/asm/arch-vf610/imx-regs.h

@@ -1,5 +1,5 @@
 /*
- * Copyright 2013 Freescale Semiconductor, Inc.
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -87,6 +87,8 @@
 #define ENET_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00050000)
 #define ENET1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00051000)
 
+#define QSPI0_AMBA_BASE		0x20000000
+
 /* MUX mode and PAD ctrl are in one register */
 #define CONFIG_IOMUX_SHARE_CONF_REG
 

arch/arm/include/asm/arch-vf610/iomux-vf610.h

@@ -1,5 +1,5 @@
 /*
- * Copyright 2013 Freescale Semiconductor, Inc.
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -20,6 +20,9 @@
 #define VF610_I2C_PAD_CTRL	(PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_50ohm | \
 				PAD_CTL_SPEED_HIGH | PAD_CTL_OBE_IBE_ENABLE)
 
+#define VF610_QSPI_PAD_CTRL	(PAD_CTL_SPEED_HIGH | PAD_CTL_DSE_150ohm | \
+				PAD_CTL_PUS_22K_UP | PAD_CTL_OBE_IBE_ENABLE)
+
 enum {
 	VF610_PAD_PTA6__RMII0_CLKIN		= IOMUX_PAD(0x0000, 0x0000, 2, __NA_, 0, VF610_ENET_PAD_CTRL),
 	VF610_PAD_PTA6__RMII0_CLKOUT		= IOMUX_PAD(0x0000, 0x0000, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
@@ -53,6 +56,18 @@ enum {
 	VF610_PAD_PTA29__ESDHC1_DAT3		= IOMUX_PAD(0x004c, 0x004c, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
 	VF610_PAD_PTB14__I2C0_SCL		= IOMUX_PAD(0x0090, 0x0090, 2, 0x033c, 1, VF610_I2C_PAD_CTRL),
 	VF610_PAD_PTB15__I2C0_SDA		= IOMUX_PAD(0x0094, 0x0094, 2, 0x0340, 1, VF610_I2C_PAD_CTRL),
+	VF610_PAD_PTD0__QSPI0_A_QSCK		= IOMUX_PAD(0x013c, 0x013c, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD1__QSPI0_A_CS0		= IOMUX_PAD(0x0140, 0x0140, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD2__QSPI0_A_DATA3		= IOMUX_PAD(0x0144, 0x0144, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD3__QSPI0_A_DATA2		= IOMUX_PAD(0x0148, 0x0148, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD4__QSPI0_A_DATA1		= IOMUX_PAD(0x014c, 0x014c, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD5__QSPI0_A_DATA0		= IOMUX_PAD(0x0150, 0x0150, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD7__QSPI0_B_QSCK		= IOMUX_PAD(0x0158, 0x0158, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD8__QSPI0_B_CS0		= IOMUX_PAD(0x015c, 0x015c, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD9__QSPI0_B_DATA3		= IOMUX_PAD(0x0160, 0x0160, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD10__QSPI0_B_DATA2		= IOMUX_PAD(0x0164, 0x0164, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD11__QSPI0_B_DATA1		= IOMUX_PAD(0x0168, 0x0168, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD12__QSPI0_B_DATA0		= IOMUX_PAD(0x016c, 0x016c, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
 	VF610_PAD_DDR_A15__DDR_A_15		= IOMUX_PAD(0x0220, 0x0220, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
 	VF610_PAD_DDR_A14__DDR_A_14		= IOMUX_PAD(0x0224, 0x0224, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
 	VF610_PAD_DDR_A13__DDR_A_13		= IOMUX_PAD(0x0228, 0x0228, 0, __NA_, 0, VF610_DDR_PAD_CTRL),

board/freescale/vf610twr/vf610twr.c

@@ -278,6 +278,26 @@ static void setup_iomux_i2c(void)
 	imx_iomux_v3_setup_multiple_pads(i2c0_pads, ARRAY_SIZE(i2c0_pads));
 }
 
+static void setup_iomux_qspi(void)
+{
+	static const iomux_v3_cfg_t qspi0_pads[] = {
+		VF610_PAD_PTD0__QSPI0_A_QSCK,
+		VF610_PAD_PTD1__QSPI0_A_CS0,
+		VF610_PAD_PTD2__QSPI0_A_DATA3,
+		VF610_PAD_PTD3__QSPI0_A_DATA2,
+		VF610_PAD_PTD4__QSPI0_A_DATA1,
+		VF610_PAD_PTD5__QSPI0_A_DATA0,
+		VF610_PAD_PTD7__QSPI0_B_QSCK,
+		VF610_PAD_PTD8__QSPI0_B_CS0,
+		VF610_PAD_PTD9__QSPI0_B_DATA3,
+		VF610_PAD_PTD10__QSPI0_B_DATA2,
+		VF610_PAD_PTD11__QSPI0_B_DATA1,
+		VF610_PAD_PTD12__QSPI0_B_DATA0,
+	};
+
+	imx_iomux_v3_setup_multiple_pads(qspi0_pads, ARRAY_SIZE(qspi0_pads));
+}
+
 #ifdef CONFIG_FSL_ESDHC
 struct fsl_esdhc_cfg esdhc_cfg[1] = {
 	{ESDHC1_BASE_ADDR},
@@ -321,7 +341,8 @@ static void clock_init(void)
 	clrsetbits_le32(&ccm->ccgr2, CCM_REG_CTRL_MASK,
 		CCM_CCGR2_IOMUXC_CTRL_MASK | CCM_CCGR2_PORTA_CTRL_MASK |
 		CCM_CCGR2_PORTB_CTRL_MASK | CCM_CCGR2_PORTC_CTRL_MASK |
-		CCM_CCGR2_PORTD_CTRL_MASK | CCM_CCGR2_PORTE_CTRL_MASK);
+		CCM_CCGR2_PORTD_CTRL_MASK | CCM_CCGR2_PORTE_CTRL_MASK |
+		CCM_CCGR2_QSPI0_CTRL_MASK);
 	clrsetbits_le32(&ccm->ccgr3, CCM_REG_CTRL_MASK,
 		CCM_CCGR3_ANADIG_CTRL_MASK);
 	clrsetbits_le32(&ccm->ccgr4, CCM_REG_CTRL_MASK,
@@ -352,11 +373,14 @@ static void clock_init(void)
 		CCM_CACRR_IPG_CLK_DIV(1) | CCM_CACRR_BUS_CLK_DIV(2) |
 		CCM_CACRR_ARM_CLK_DIV(0));
 	clrsetbits_le32(&ccm->cscmr1, CCM_REG_CTRL_MASK,
-		CCM_CSCMR1_ESDHC1_CLK_SEL(3));
+		CCM_CSCMR1_ESDHC1_CLK_SEL(3) | CCM_CSCMR1_QSPI0_CLK_SEL(3));
 	clrsetbits_le32(&ccm->cscdr1, CCM_REG_CTRL_MASK,
 		CCM_CSCDR1_RMII_CLK_EN);
 	clrsetbits_le32(&ccm->cscdr2, CCM_REG_CTRL_MASK,
 		CCM_CSCDR2_ESDHC1_EN | CCM_CSCDR2_ESDHC1_CLK_DIV(0));
+	clrsetbits_le32(&ccm->cscdr3, CCM_REG_CTRL_MASK,
+		CCM_CSCDR3_QSPI0_EN | CCM_CSCDR3_QSPI0_DIV(1) |
+		CCM_CSCDR3_QSPI0_X2_DIV(1) | CCM_CSCDR3_QSPI0_X4_DIV(3));
 	clrsetbits_le32(&ccm->cscmr2, CCM_REG_CTRL_MASK,
 		CCM_CSCMR2_RMII_CLK_SEL(0));
 }
@@ -386,6 +410,7 @@ int board_early_init_f(void)
 	setup_iomux_uart();
 	setup_iomux_enet();
 	setup_iomux_i2c();
+	setup_iomux_qspi();
 
 	return 0;
 }

include/configs/vf610twr.h

@@ -68,6 +68,18 @@
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_MICREL
 
+/* QSPI Configs*/
+#define CONFIG_FSL_QSPI
+
+#ifdef CONFIG_FSL_QSPI
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_SPANSION
+#define FSL_QSPI_FLASH_SIZE		(1 << 24)
+#define FSL_QSPI_FLASH_NUM		2
+#define CONFIG_SYS_FSL_QSPI_LE
+#endif
+
 /* I2C Configs */
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C