ppc_4xx: Apply new HW register names

Modify all existing *.c files to use the new register names
as seen in the AMCC manuals.

Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
Signed-off-by: Stefan Roese <sr@denx.de>

board/amcc/bamboo/bamboo.c

@@ -542,22 +542,22 @@ void pci_target_init(struct pci_controller *hose)
 	  |   Use byte reversed out routines to handle endianess.
 	  | Make this region non-prefetchable.
 	  +--------------------------------------------------------------------------*/
-	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
+	out32r(PCIL0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
-	out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
+	out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 PCI Low Address */
+	out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 PCI Low Address */
-	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIL0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
+	out32r(PCIL0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
-
+
-	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
+	out32r(PCIL0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
-	out32r(PCIX0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */
+	out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */
-	out32r(PCIX0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
+	out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
-	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIL0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
+	out32r(PCIL0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
-
+
-	out32r(PCIX0_PTM1MS, 0x00000001);	/* Memory Size/Attribute */
+	out32r(PCIL0_PTM1MS, 0x00000001);	/* Memory Size/Attribute */
-	out32r(PCIX0_PTM1LA, 0);	/* Local Addr. Reg */
+	out32r(PCIL0_PTM1LA, 0);	/* Local Addr. Reg */
-	out32r(PCIX0_PTM2MS, 0);	/* Memory Size/Attribute */
+	out32r(PCIL0_PTM2MS, 0);	/* Memory Size/Attribute */
-	out32r(PCIX0_PTM2LA, 0);	/* Local Addr. Reg */
+	out32r(PCIL0_PTM2LA, 0);	/* Local Addr. Reg */
 
 	/*--------------------------------------------------------------------------+
 	 * Set up Configuration registers

board/amcc/canyonlands/canyonlands.c

@@ -339,27 +339,27 @@ void pci_target_init(struct pci_controller * hose )
 	/*
 	 * Disable everything
 	 */
-	out_le32((void *)PCIX0_PIM0SA, 0); /* disable */
+	out_le32((void *)PCIL0_PIM0SA, 0); /* disable */
-	out_le32((void *)PCIX0_PIM1SA, 0); /* disable */
+	out_le32((void *)PCIL0_PIM1SA, 0); /* disable */
-	out_le32((void *)PCIX0_PIM2SA, 0); /* disable */
+	out_le32((void *)PCIL0_PIM2SA, 0); /* disable */
-	out_le32((void *)PCIX0_EROMBA, 0); /* disable expansion rom */
+	out_le32((void *)PCIL0_EROMBA, 0); /* disable expansion rom */
 
 	/*
 	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440
 	 * strapping options to not support sizes such as 128/256 MB.
 	 */
-	out_le32((void *)PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE);
+	out_le32((void *)PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE);
-	out_le32((void *)PCIX0_PIM0LAH, 0);
+	out_le32((void *)PCIL0_PIM0LAH, 0);
-	out_le32((void *)PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1);
+	out_le32((void *)PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1);
-	out_le32((void *)PCIX0_BAR0, 0);
+	out_le32((void *)PCIL0_BAR0, 0);
 
 	/*
 	 * Program the board's subsystem id/vendor id
 	 */
-	out_le16((void *)PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
+	out_le16((void *)PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
-	out_le16((void *)PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
+	out_le16((void *)PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
 
-	out_le16((void *)PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY);
+	out_le16((void *)PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY);
 }
 #endif	/* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 

board/amcc/ebony/ebony.c

@@ -210,28 +210,28 @@ void pci_target_init(struct pci_controller *hose)
 	/*--------------------------------------------------------------------------+
 	 * Disable everything
 	 *--------------------------------------------------------------------------*/
-	out32r(PCIX0_PIM0SA, 0);	/* disable */
+	out32r(PCIL0_PIM0SA, 0);	/* disable */
-	out32r(PCIX0_PIM1SA, 0);	/* disable */
+	out32r(PCIL0_PIM1SA, 0);	/* disable */
-	out32r(PCIX0_PIM2SA, 0);	/* disable */
+	out32r(PCIL0_PIM2SA, 0);	/* disable */
-	out32r(PCIX0_EROMBA, 0);	/* disable expansion rom */
+	out32r(PCIL0_EROMBA, 0);	/* disable expansion rom */
 
 	/*--------------------------------------------------------------------------+
 	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
      * options to not support sizes such as 128/256 MB.
 	 *--------------------------------------------------------------------------*/
-	out32r(PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE);
+	out32r(PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE);
-	out32r(PCIX0_PIM0LAH, 0);
+	out32r(PCIL0_PIM0LAH, 0);
-	out32r(PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1);
+	out32r(PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1);
 
-	out32r(PCIX0_BAR0, 0);
+	out32r(PCIL0_BAR0, 0);
 
 	/*--------------------------------------------------------------------------+
 	 * Program the board's subsystem id/vendor id
 	 *--------------------------------------------------------------------------*/
-	out16r(PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
+	out16r(PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
-	out16r(PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
+	out16r(PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
 
-	out16r(PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY);
+	out16r(PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY);
 }
 #endif				/* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 

board/amcc/katmai/katmai.c

@@ -305,27 +305,27 @@ void pci_target_init(struct pci_controller * hose )
 	/*-------------------------------------------------------------------+
 	 * Disable everything
 	 *-------------------------------------------------------------------*/
-	out32r( PCIX0_PIM0SA, 0 ); /* disable */
+	out32r( PCIL0_PIM0SA, 0 ); /* disable */
-	out32r( PCIX0_PIM1SA, 0 ); /* disable */
+	out32r( PCIL0_PIM1SA, 0 ); /* disable */
-	out32r( PCIX0_PIM2SA, 0 ); /* disable */
+	out32r( PCIL0_PIM2SA, 0 ); /* disable */
-	out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
+	out32r( PCIL0_EROMBA, 0 ); /* disable expansion rom */
 
 	/*-------------------------------------------------------------------+
 	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440
 	 * strapping options to not support sizes such as 128/256 MB.
 	 *-------------------------------------------------------------------*/
-	out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
+	out32r( PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
-	out32r( PCIX0_PIM0LAH, 0 );
+	out32r( PCIL0_PIM0LAH, 0 );
-	out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
+	out32r( PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1 );
-	out32r( PCIX0_BAR0, 0 );
+	out32r( PCIL0_BAR0, 0 );
 
 	/*-------------------------------------------------------------------+
 	 * Program the board's subsystem id/vendor id
 	 *-------------------------------------------------------------------*/
-	out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+	out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
-	out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
+	out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
 
-	out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
+	out16r( PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY );
 }
 #endif	/* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 

board/amcc/luan/epld.h

@@ -8,8 +8,8 @@
 #define EPLD0_FLASH_SRAM_SEL_N	0x01	/* 0 SRAM at mem top, 1 small flash at mem top */
 
 #define EPLD1_CLK_CNTL0		0x80	/* FSEL-FB1 of MPC9772 */
-#define EPLD1_PCIX0_CNTL1	0x40	/* S*0 of 9531 */
+#define EPLD1_PCIL0_CNTL1	0x40	/* S*0 of 9531 */
-#define EPLD1_PCIX0_CNTL2	0x20	/* S*1 of 9531 */
+#define EPLD1_PCIL0_CNTL2	0x20	/* S*1 of 9531 */
 #define EPLD1_CLK_CNTL3		0x10	/* FSEL-B1 of MPC9772 */
 #define EPLD1_CLK_CNTL4		0x08	/* FSEL-B0 of MPC9772 */
 #define EPLD1_MASTER_CLOCK6	0x04	/* clock source select 6 */
@@ -29,25 +29,25 @@
 #define EPLD3_STATUS_LED2	0x02	/* status LED 2 (1 = LED on) */
 #define EPLD3_STATUS_LED1	0x01	/* status LED 1 (1 = LED on) */
 
-#define EPLD4_PCIX0_VTH1	0x80	/* PCI-X 0 VTH1 status */
+#define EPLD4_PCIL0_VTH1	0x80	/* PCI-X 0 VTH1 status */
-#define EPLD4_PCIX0_VTH2	0x40	/* PCI-X 0 VTH2 status */
+#define EPLD4_PCIL0_VTH2	0x40	/* PCI-X 0 VTH2 status */
-#define EPLD4_PCIX0_VTH3	0x20	/* PCI-X 0 VTH3 status */
+#define EPLD4_PCIL0_VTH3	0x20	/* PCI-X 0 VTH3 status */
-#define EPLD4_PCIX0_VTH4	0x10	/* PCI-X 0 VTH4 status */
+#define EPLD4_PCIL0_VTH4	0x10	/* PCI-X 0 VTH4 status */
 #define EPLD4_PCIX1_VTH1	0x08	/* PCI-X 1 VTH1 status */
 #define EPLD4_PCIX1_VTH2	0x04	/* PCI-X 1 VTH2 status */
 #define EPLD4_PCIX1_VTH3	0x02	/* PCI-X 1 VTH3 status */
 #define EPLD4_PCIX1_VTH4	0x01	/* PCI-X 1 VTH4 status */
 
-#define EPLD5_PCIX0_INT0	0x80	/* PCIX0 INT0 status, write 0 to reset */
+#define EPLD5_PCIL0_INT0	0x80	/* PCIX0 INT0 status, write 0 to reset */
-#define EPLD5_PCIX0_INT1	0x40	/* PCIX0 INT1 status, write 0 to reset */
+#define EPLD5_PCIL0_INT1	0x40	/* PCIX0 INT1 status, write 0 to reset */
-#define EPLD5_PCIX0_INT2	0x20	/* PCIX0 INT2 status, write 0 to reset */
+#define EPLD5_PCIL0_INT2	0x20	/* PCIX0 INT2 status, write 0 to reset */
-#define EPLD5_PCIX0_INT3	0x10	/* PCIX0 INT3 status, write 0 to reset */
+#define EPLD5_PCIL0_INT3	0x10	/* PCIX0 INT3 status, write 0 to reset */
 #define EPLD5_PCIX1_INT0	0x08	/* PCIX1 INT0 status, write 0 to reset */
 #define EPLD5_PCIX1_INT1	0x04	/* PCIX1 INT1 status, write 0 to reset */
 #define EPLD5_PCIX1_INT2	0x02	/* PCIX1 INT2 status, write 0 to reset */
 #define EPLD5_PCIX1_INT3	0x01	/* PCIX1 INT3 status, write 0 to reset */
 
-#define EPLD6_PCIX0_RESET_CTL	0x80	/* 0=enable slot reset, 1=disable slot reset */
+#define EPLD6_PCIL0_RESET_CTL	0x80	/* 0=enable slot reset, 1=disable slot reset */
 #define EPLD6_PCIX1_RESET_CTL	0x40	/* 0=enable slot reset, 1=disable slot reset */
 #define EPLD6_ETH_INT_MODE	0x20	/* 0=IRQ5 recv's external eth int */
 #define EPLD6_PCIX2_RESET_CTL	0x10	/* 0=enable slot reset, 1=disable slot reset */

board/amcc/luan/luan.c

@@ -173,28 +173,28 @@ void pci_target_init(struct pci_controller *hose)
 	/*--------------------------------------------------------------------------+
 	 * Disable everything
 	 *--------------------------------------------------------------------------*/
-	out32r( PCIX0_PIM0SA, 0 ); /* disable */
+	out32r( PCIL0_PIM0SA, 0 ); /* disable */
-	out32r( PCIX0_PIM1SA, 0 ); /* disable */
+	out32r( PCIL0_PIM1SA, 0 ); /* disable */
-	out32r( PCIX0_PIM2SA, 0 ); /* disable */
+	out32r( PCIL0_PIM2SA, 0 ); /* disable */
-	out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
+	out32r( PCIL0_EROMBA, 0 ); /* disable expansion rom */
 
 	/*--------------------------------------------------------------------------+
 	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
 	 * options to not support sizes such as 128/256 MB.
 	 *--------------------------------------------------------------------------*/
-	out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
+	out32r( PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
-	out32r( PCIX0_PIM0LAH, 0 );
+	out32r( PCIL0_PIM0LAH, 0 );
-	out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
+	out32r( PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1 );
 
-	out32r( PCIX0_BAR0, 0 );
+	out32r( PCIL0_BAR0, 0 );
 
 	/*--------------------------------------------------------------------------+
 	 * Program the board's subsystem id/vendor id
 	 *--------------------------------------------------------------------------*/
-	out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+	out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
-	out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
+	out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
 
-	out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
+	out16r( PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY );
 }
 #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 

board/amcc/ocotea/ocotea.c

@@ -321,28 +321,28 @@ void pci_target_init(struct pci_controller * hose )
 	/*--------------------------------------------------------------------------+
 	 * Disable everything
 	 *--------------------------------------------------------------------------*/
-	out32r( PCIX0_PIM0SA, 0 ); /* disable */
+	out32r( PCIL0_PIM0SA, 0 ); /* disable */
-	out32r( PCIX0_PIM1SA, 0 ); /* disable */
+	out32r( PCIL0_PIM1SA, 0 ); /* disable */
-	out32r( PCIX0_PIM2SA, 0 ); /* disable */
+	out32r( PCIL0_PIM2SA, 0 ); /* disable */
-	out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
+	out32r( PCIL0_EROMBA, 0 ); /* disable expansion rom */
 
 	/*--------------------------------------------------------------------------+
 	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
 	 * options to not support sizes such as 128/256 MB.
 	 *--------------------------------------------------------------------------*/
-	out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
+	out32r( PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
-	out32r( PCIX0_PIM0LAH, 0 );
+	out32r( PCIL0_PIM0LAH, 0 );
-	out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
+	out32r( PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1 );
 
-	out32r( PCIX0_BAR0, 0 );
+	out32r( PCIL0_BAR0, 0 );
 
 	/*--------------------------------------------------------------------------+
 	 * Program the board's subsystem id/vendor id
 	 *--------------------------------------------------------------------------*/
-	out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+	out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
-	out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
+	out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
 
-	out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
+	out16r( PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY );
 }
 #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 

board/amcc/sequoia/sequoia.c

@@ -428,26 +428,26 @@ void pci_target_init(struct pci_controller *hose)
 	 * Use byte reversed out routines to handle endianess.
 	 * Make this region non-prefetchable.
 	 */
-	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute */
+	out32r(PCIL0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute */
 						/* - disabled b4 setting */
-	out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
+	out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */
+	out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */
-	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIL0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, */
+	out32r(PCIL0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, */
 						/* and enable region */
 
-	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute */
+	out32r(PCIL0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute */
 						/* - disabled b4 setting */
-	out32r(PCIX0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */
+	out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */
-	out32r(PCIX0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */
+	out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */
-	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIL0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, */
+	out32r(PCIL0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, */
 						/* and enable region */
 
-	out32r(PCIX0_PTM1MS, 0x00000001);	/* Memory Size/Attribute */
+	out32r(PCIL0_PTM1MS, 0x00000001);	/* Memory Size/Attribute */
-	out32r(PCIX0_PTM1LA, 0);		/* Local Addr. Reg */
+	out32r(PCIL0_PTM1LA, 0);		/* Local Addr. Reg */
-	out32r(PCIX0_PTM2MS, 0);		/* Memory Size/Attribute */
+	out32r(PCIL0_PTM2MS, 0);		/* Memory Size/Attribute */
-	out32r(PCIX0_PTM2LA, 0);		/* Local Addr. Reg */
+	out32r(PCIL0_PTM2LA, 0);		/* Local Addr. Reg */
 
 	/*
 	 * Set up Configuration registers

board/amcc/taishan/showinfo.c

@@ -39,13 +39,13 @@ void show_reset_reg(void)
 	mfcpr(CPR0_PLLD,reg);
 	printf("cpr_plld   = %#010lx\n",reg);
 
-	mfcpr(CPR0_PRIMAD,reg);
+	mfcpr(CPR0_PRIMAD0,reg);
 	printf("cpr_primad = %#010lx\n",reg);
 
-	mfcpr(CPR0_PRIMBD,reg);
+	mfcpr(CPR0_PRIMBD0,reg);
 	printf("cpr_primbd = %#010lx\n",reg);
 
-	mfcpr(CPR0_OPBD,reg);
+	mfcpr(CPR0_OPBD0,reg);
 	printf("cpr_opbd   = %#010lx\n",reg);
 
 	mfcpr(CPR0_PERD,reg);
@@ -106,59 +106,59 @@ void show_xbridge_info(void)
 	printf("SDR0_XPLLD  = %#010lx\n", reg);
 
 	printf("PCI-X Bridge Configure registers\n");
-	printf("PCIX0_VENDID            = %#06x\n", in16r(PCIX0_VENDID));
+	printf("PCIL0_VENDID            = %#06x\n", in16r(PCIL0_VENDID));
-	printf("PCIX0_DEVID             = %#06x\n", in16r(PCIX0_DEVID));
+	printf("PCIL0_DEVID             = %#06x\n", in16r(PCIL0_DEVID));
-	printf("PCIX0_CMD               = %#06x\n", in16r(PCIX0_CMD));
+	printf("PCIL0_CMD               = %#06x\n", in16r(PCIL0_CMD));
-	printf("PCIX0_STATUS            = %#06x\n", in16r(PCIX0_STATUS));
+	printf("PCIL0_STATUS            = %#06x\n", in16r(PCIL0_STATUS));
-	printf("PCIX0_REVID             = %#04x\n", in8(PCIX0_REVID));
+	printf("PCIL0_REVID             = %#04x\n", in8(PCIL0_REVID));
-	printf("PCIX0_CACHELS           = %#04x\n", in8(PCIX0_CACHELS));
+	printf("PCIL0_CACHELS           = %#04x\n", in8(PCIL0_CACHELS));
-	printf("PCIX0_LATTIM            = %#04x\n", in8(PCIX0_LATTIM));
+	printf("PCIL0_LATTIM            = %#04x\n", in8(PCIL0_LATTIM));
-	printf("PCIX0_HDTYPE            = %#04x\n", in8(PCIX0_HDTYPE));
+	printf("PCIL0_HDTYPE            = %#04x\n", in8(PCIL0_HDTYPE));
-	printf("PCIX0_BIST              = %#04x\n", in8(PCIX0_BIST));
+	printf("PCIL0_BIST              = %#04x\n", in8(PCIL0_BIST));
-
+
-	printf("PCIX0_BAR0              = %#010lx\n", in32r(PCIX0_BAR0));
+	printf("PCIL0_BAR0              = %#010lx\n", in32r(PCIL0_BAR0));
-	printf("PCIX0_BAR1              = %#010lx\n", in32r(PCIX0_BAR1));
+	printf("PCIL0_BAR1              = %#010lx\n", in32r(PCIL0_BAR1));
-	printf("PCIX0_BAR2              = %#010lx\n", in32r(PCIX0_BAR2));
+	printf("PCIL0_BAR2              = %#010lx\n", in32r(PCIL0_BAR2));
-	printf("PCIX0_BAR3              = %#010lx\n", in32r(PCIX0_BAR3));
+	printf("PCIL0_BAR3              = %#010lx\n", in32r(PCIL0_BAR3));
-	printf("PCIX0_BAR4              = %#010lx\n", in32r(PCIX0_BAR4));
+	printf("PCIL0_BAR4              = %#010lx\n", in32r(PCIL0_BAR4));
-	printf("PCIX0_BAR5              = %#010lx\n", in32r(PCIX0_BAR5));
+	printf("PCIL0_BAR5              = %#010lx\n", in32r(PCIL0_BAR5));
-
+
-	printf("PCIX0_CISPTR            = %#010lx\n", in32r(PCIX0_CISPTR));
+	printf("PCIL0_CISPTR            = %#010lx\n", in32r(PCIL0_CISPTR));
-	printf("PCIX0_SBSSYSVID         = %#010x\n", in16r(PCIX0_SBSYSVID));
+	printf("PCIL0_SBSSYSVID         = %#010x\n", in16r(PCIL0_SBSYSVID));
-	printf("PCIX0_SBSSYSID          = %#010x\n", in16r(PCIX0_SBSYSID));
+	printf("PCIL0_SBSSYSID          = %#010x\n", in16r(PCIL0_SBSYSID));
-	printf("PCIX0_EROMBA            = %#010lx\n", in32r(PCIX0_EROMBA));
+	printf("PCIL0_EROMBA            = %#010lx\n", in32r(PCIL0_EROMBA));
-	printf("PCIX0_CAP               = %#04x\n", in8(PCIX0_CAP));
+	printf("PCIL0_CAP               = %#04x\n", in8(PCIL0_CAP));
-	printf("PCIX0_INTLN             = %#04x\n", in8(PCIX0_INTLN));
+	printf("PCIL0_INTLN             = %#04x\n", in8(PCIL0_INTLN));
-	printf("PCIX0_INTPN             = %#04x\n", in8(PCIX0_INTPN));
+	printf("PCIL0_INTPN             = %#04x\n", in8(PCIL0_INTPN));
-	printf("PCIX0_MINGNT            = %#04x\n", in8(PCIX0_MINGNT));
+	printf("PCIL0_MINGNT            = %#04x\n", in8(PCIL0_MINGNT));
-	printf("PCIX0_MAXLTNCY          = %#04x\n", in8(PCIX0_MAXLTNCY));
+	printf("PCIL0_MAXLTNCY          = %#04x\n", in8(PCIL0_MAXLTNCY));
-
+
-	printf("PCIX0_BRDGOPT1          = %#010lx\n", in32r(PCIX0_BRDGOPT1));
+	printf("PCIL0_BRDGOPT1          = %#010lx\n", in32r(PCIL0_BRDGOPT1));
-	printf("PCIX0_BRDGOPT2          = %#010lx\n", in32r(PCIX0_BRDGOPT2));
+	printf("PCIL0_BRDGOPT2          = %#010lx\n", in32r(PCIL0_BRDGOPT2));
-
+
-	printf("PCIX0_POM0LAL           = %#010lx\n", in32r(PCIX0_POM0LAL));
+	printf("PCIL0_POM0LAL           = %#010lx\n", in32r(PCIL0_POM0LAL));
-	printf("PCIX0_POM0LAH           = %#010lx\n", in32r(PCIX0_POM0LAH));
+	printf("PCIL0_POM0LAH           = %#010lx\n", in32r(PCIL0_POM0LAH));
-	printf("PCIX0_POM0SA            = %#010lx\n", in32r(PCIX0_POM0SA));
+	printf("PCIL0_POM0SA            = %#010lx\n", in32r(PCIL0_POM0SA));
-	printf("PCIX0_POM0PCILAL        = %#010lx\n", in32r(PCIX0_POM0PCIAL));
+	printf("PCIL0_POM0PCILAL        = %#010lx\n", in32r(PCIL0_POM0PCIAL));
-	printf("PCIX0_POM0PCILAH        = %#010lx\n", in32r(PCIX0_POM0PCIAH));
+	printf("PCIL0_POM0PCILAH        = %#010lx\n", in32r(PCIL0_POM0PCIAH));
-	printf("PCIX0_POM1LAL           = %#010lx\n", in32r(PCIX0_POM1LAL));
+	printf("PCIL0_POM1LAL           = %#010lx\n", in32r(PCIL0_POM1LAL));
-	printf("PCIX0_POM1LAH           = %#010lx\n", in32r(PCIX0_POM1LAH));
+	printf("PCIL0_POM1LAH           = %#010lx\n", in32r(PCIL0_POM1LAH));
-	printf("PCIX0_POM1SA            = %#010lx\n", in32r(PCIX0_POM1SA));
+	printf("PCIL0_POM1SA            = %#010lx\n", in32r(PCIL0_POM1SA));
-	printf("PCIX0_POM1PCILAL        = %#010lx\n", in32r(PCIX0_POM1PCIAL));
+	printf("PCIL0_POM1PCILAL        = %#010lx\n", in32r(PCIL0_POM1PCIAL));
-	printf("PCIX0_POM1PCILAH        = %#010lx\n", in32r(PCIX0_POM1PCIAH));
+	printf("PCIL0_POM1PCILAH        = %#010lx\n", in32r(PCIL0_POM1PCIAH));
-	printf("PCIX0_POM2SA            = %#010lx\n", in32r(PCIX0_POM2SA));
+	printf("PCIL0_POM2SA            = %#010lx\n", in32r(PCIL0_POM2SA));
-
+
-	printf("PCIX0_PIM0SA            = %#010lx\n", in32r(PCIX0_PIM0SA));
+	printf("PCIL0_PIM0SA            = %#010lx\n", in32r(PCIL0_PIM0SA));
-	printf("PCIX0_PIM0LAL           = %#010lx\n", in32r(PCIX0_PIM0LAL));
+	printf("PCIL0_PIM0LAL           = %#010lx\n", in32r(PCIL0_PIM0LAL));
-	printf("PCIX0_PIM0LAH           = %#010lx\n", in32r(PCIX0_PIM0LAH));
+	printf("PCIL0_PIM0LAH           = %#010lx\n", in32r(PCIL0_PIM0LAH));
-	printf("PCIX0_PIM1SA            = %#010lx\n", in32r(PCIX0_PIM1SA));
+	printf("PCIL0_PIM1SA            = %#010lx\n", in32r(PCIL0_PIM1SA));
-	printf("PCIX0_PIM1LAL           = %#010lx\n", in32r(PCIX0_PIM1LAL));
+	printf("PCIL0_PIM1LAL           = %#010lx\n", in32r(PCIL0_PIM1LAL));
-	printf("PCIX0_PIM1LAH           = %#010lx\n", in32r(PCIX0_PIM1LAH));
+	printf("PCIL0_PIM1LAH           = %#010lx\n", in32r(PCIL0_PIM1LAH));
-	printf("PCIX0_PIM2SA            = %#010lx\n", in32r(PCIX0_PIM1SA));
+	printf("PCIL0_PIM2SA            = %#010lx\n", in32r(PCIL0_PIM1SA));
-	printf("PCIX0_PIM2LAL           = %#010lx\n", in32r(PCIX0_PIM1LAL));
+	printf("PCIL0_PIM2LAL           = %#010lx\n", in32r(PCIL0_PIM1LAL));
-	printf("PCIX0_PIM2LAH           = %#010lx\n", in32r(PCIX0_PIM1LAH));
+	printf("PCIL0_PIM2LAH           = %#010lx\n", in32r(PCIL0_PIM1LAH));
-
+
-	printf("PCIX0_XSTS              = %#010lx\n", in32r(PCIX0_STS));
+	printf("PCIL0_XSTS              = %#010lx\n", in32r(PCIL0_STS));
 }
 
 int do_show_xbridge_info(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])

board/amcc/taishan/taishan.c

@@ -254,28 +254,28 @@ void pci_target_init(struct pci_controller * hose )
 	/*--------------------------------------------------------------------------+
 	 * Disable everything
 	 *--------------------------------------------------------------------------*/
-	out32r( PCIX0_PIM0SA, 0 ); /* disable */
+	out32r( PCIL0_PIM0SA, 0 ); /* disable */
-	out32r( PCIX0_PIM1SA, 0 ); /* disable */
+	out32r( PCIL0_PIM1SA, 0 ); /* disable */
-	out32r( PCIX0_PIM2SA, 0 ); /* disable */
+	out32r( PCIL0_PIM2SA, 0 ); /* disable */
-	out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
+	out32r( PCIL0_EROMBA, 0 ); /* disable expansion rom */
 
 	/*--------------------------------------------------------------------------+
 	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
 	 * options to not support sizes such as 128/256 MB.
 	 *--------------------------------------------------------------------------*/
-	out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
+	out32r( PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
-	out32r( PCIX0_PIM0LAH, 0 );
+	out32r( PCIL0_PIM0LAH, 0 );
-	out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
+	out32r( PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1 );
 
-	out32r( PCIX0_BAR0, 0 );
+	out32r( PCIL0_BAR0, 0 );
 
 	/*--------------------------------------------------------------------------+
 	 * Program the board's subsystem id/vendor id
 	 *--------------------------------------------------------------------------*/
-	out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+	out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
-	out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
+	out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
 
-	out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
+	out16r( PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY );
 }
 #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 

board/amcc/yosemite/yosemite.c

@@ -408,22 +408,22 @@ void pci_target_init(struct pci_controller *hose)
 	  |   Use byte reversed out routines to handle endianess.
 	  | Make this region non-prefetchable.
 	  +--------------------------------------------------------------------------*/
-	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
+	out32r(PCIL0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
-	out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
+	out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 PCI Low Address */
+	out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 PCI Low Address */
-	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIL0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
+	out32r(PCIL0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
-
+
-	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
+	out32r(PCIL0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
-	out32r(PCIX0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2);	/* PMM0 Local Address */
+	out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
+	out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
-	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIL0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
+	out32r(PCIL0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
-
+
-	out32r(PCIX0_PTM1MS, 0x00000001);	/* Memory Size/Attribute */
+	out32r(PCIL0_PTM1MS, 0x00000001);	/* Memory Size/Attribute */
-	out32r(PCIX0_PTM1LA, 0);	/* Local Addr. Reg */
+	out32r(PCIL0_PTM1LA, 0);	/* Local Addr. Reg */
-	out32r(PCIX0_PTM2MS, 0);	/* Memory Size/Attribute */
+	out32r(PCIL0_PTM2MS, 0);	/* Memory Size/Attribute */
-	out32r(PCIX0_PTM2LA, 0);	/* Local Addr. Reg */
+	out32r(PCIL0_PTM2LA, 0);	/* Local Addr. Reg */
 
 	/*--------------------------------------------------------------------------+
 	 * Set up Configuration registers

board/amcc/yucca/yucca.c

@@ -633,27 +633,27 @@ void pci_target_init(struct pci_controller * hose )
 	/*-------------------------------------------------------------------+
 	 * Disable everything
 	 *-------------------------------------------------------------------*/
-	out32r( PCIX0_PIM0SA, 0 ); /* disable */
+	out32r( PCIL0_PIM0SA, 0 ); /* disable */
-	out32r( PCIX0_PIM1SA, 0 ); /* disable */
+	out32r( PCIL0_PIM1SA, 0 ); /* disable */
-	out32r( PCIX0_PIM2SA, 0 ); /* disable */
+	out32r( PCIL0_PIM2SA, 0 ); /* disable */
-	out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
+	out32r( PCIL0_EROMBA, 0 ); /* disable expansion rom */
 
 	/*-------------------------------------------------------------------+
 	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440
 	 * strapping options to not support sizes such as 128/256 MB.
 	 *-------------------------------------------------------------------*/
-	out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
+	out32r( PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
-	out32r( PCIX0_PIM0LAH, 0 );
+	out32r( PCIL0_PIM0LAH, 0 );
-	out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
+	out32r( PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1 );
-	out32r( PCIX0_BAR0, 0 );
+	out32r( PCIL0_BAR0, 0 );
 
 	/*-------------------------------------------------------------------+
 	 * Program the board's subsystem id/vendor id
 	 *-------------------------------------------------------------------*/
-	out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+	out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
-	out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
+	out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
 
-	out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
+	out16r( PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY );
 }
 #endif	/* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 

board/esd/common/cmd_loadpci.c

@@ -48,7 +48,7 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	u32 la, ptm1la;
 
 #if defined(CONFIG_440)
-	ptm1la = in32r(PCIX0_PTM1LA);
+	ptm1la = in32r(PCIL0_PTM1LA);
 #else
 	ptm1la = in32r(PTM1LA);
 #endif

board/esd/du440/du440.c

@@ -435,26 +435,26 @@ void pci_target_init(struct pci_controller *hose)
 	 * Use byte reversed out routines to handle endianess.
 	 * Make this region non-prefetchable.
 	 */
-	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute */
+	out32r(PCIL0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute */
 						/* - disabled b4 setting */
-	out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
+	out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */
+	out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */
-	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIL0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, */
+	out32r(PCIL0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, */
 						/* and enable region */
 
-	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute */
+	out32r(PCIL0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute */
 						/* - disabled b4 setting */
-	out32r(PCIX0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */
+	out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */
-	out32r(PCIX0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */
+	out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */
-	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIL0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, */
+	out32r(PCIL0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, */
 						/* and enable region */
 
-	out32r(PCIX0_PTM1MS, 0x00000001);	/* Memory Size/Attribute */
+	out32r(PCIL0_PTM1MS, 0x00000001);	/* Memory Size/Attribute */
-	out32r(PCIX0_PTM1LA, 0);		/* Local Addr. Reg */
+	out32r(PCIL0_PTM1LA, 0);		/* Local Addr. Reg */
-	out32r(PCIX0_PTM2MS, 0);		/* Memory Size/Attribute */
+	out32r(PCIL0_PTM2MS, 0);		/* Memory Size/Attribute */
-	out32r(PCIX0_PTM2LA, 0);		/* Local Addr. Reg */
+	out32r(PCIL0_PTM2LA, 0);		/* Local Addr. Reg */
 
 	/*
 	 * Set up Configuration registers

board/esd/pmc440/cmd_pmc440.c

@@ -497,15 +497,15 @@ int do_pmm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		/* map PCI address at 0xc0000000 in PLB space */
 
 		/* PMM1 Mask/Attribute - disabled b4 setting */
-		out32r(PCIX0_PMM1MA, 0x00000000);
+		out32r(PCIL0_PMM1MA, 0x00000000);
 		/* PMM1 Local Address */
-		out32r(PCIX0_PMM1LA, 0xc0000000);
+		out32r(PCIL0_PMM1LA, 0xc0000000);
 		/* PMM1 PCI Low Address */
-		out32r(PCIX0_PMM1PCILA, pciaddr);
+		out32r(PCIL0_PMM1PCILA, pciaddr);
 		/* PMM1 PCI High Address */
-		out32r(PCIX0_PMM1PCIHA, 0x00000000);
+		out32r(PCIL0_PMM1PCIHA, 0x00000000);
 		/* 256MB + No prefetching, and enable region */
-		out32r(PCIX0_PMM1MA, 0xf0000001);
+		out32r(PCIL0_PMM1MA, 0xf0000001);
 	} else {
 		printf("Usage:\npmm %s\n", cmdtp->help);
 	}

board/esd/pmc440/pmc440.c

@@ -208,7 +208,7 @@ int misc_init_f(void)
 
 	if (getenv("pciearly") && (!is_monarch())) {
 		printf("PCI:   early target init\n");
-		pci_setup_indirect(&hose, PCIX0_CFGADR, PCIX0_CFGDATA);
+		pci_setup_indirect(&hose, PCIL0_CFGADR, PCIL0_CFGDATA);
 		pci_target_init(&hose);
 	}
 	return 0;
@@ -568,42 +568,42 @@ void pci_target_init(struct pci_controller *hose)
 	 * Use byte reversed out routines to handle endianess.
 	 * Make this region non-prefetchable.
 	 */
-	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute */
+	out32r(PCIL0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute */
 						/* - disabled b4 setting */
-	out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
+	out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */
+	out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */
-	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIL0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_PMM0MA, 0xc0000001);	/* 1G + No prefetching, */
+	out32r(PCIL0_PMM0MA, 0xc0000001);	/* 1G + No prefetching, */
 						/* and enable region */
 
 	if (!is_monarch()) {
 		ptmla_str = getenv("ptm1la");
 		ptmms_str = getenv("ptm1ms");
 		if(NULL != ptmla_str && NULL != ptmms_str ) {
-			out32r(PCIX0_PTM1MS,
+			out32r(PCIL0_PTM1MS,
 			       simple_strtoul(ptmms_str, NULL, 16));
-			out32r(PCIX0_PTM1LA,
+			out32r(PCIL0_PTM1LA,
 			       simple_strtoul(ptmla_str, NULL, 16));
 		} else {
 			/* BAR1: default top 64MB of RAM */
-			out32r(PCIX0_PTM1MS, 0xfc000001);
+			out32r(PCIL0_PTM1MS, 0xfc000001);
-			out32r(PCIX0_PTM1LA, 0x0c000000);
+			out32r(PCIL0_PTM1LA, 0x0c000000);
 		}
 	} else {
 		/* BAR1: default: complete 256MB RAM */
-		out32r(PCIX0_PTM1MS, 0xf0000001);
+		out32r(PCIL0_PTM1MS, 0xf0000001);
-		out32r(PCIX0_PTM1LA, 0x00000000);
+		out32r(PCIL0_PTM1LA, 0x00000000);
 	}
 
 	ptmla_str = getenv("ptm2la");		/* Local Addr. Reg */
 	ptmms_str = getenv("ptm2ms");		/* Memory Size/Attribute */
 	if(NULL != ptmla_str && NULL != ptmms_str ) {
-		out32r(PCIX0_PTM2MS, simple_strtoul(ptmms_str, NULL, 16));
+		out32r(PCIL0_PTM2MS, simple_strtoul(ptmms_str, NULL, 16));
-		out32r(PCIX0_PTM2LA, simple_strtoul(ptmla_str, NULL, 16));
+		out32r(PCIL0_PTM2LA, simple_strtoul(ptmla_str, NULL, 16));
 	} else {
 		/* BAR2: default: 4MB FPGA */
-		out32r(PCIX0_PTM2MS, 0xffc00001); /* Memory Size/Attribute */
+		out32r(PCIL0_PTM2MS, 0xffc00001); /* Memory Size/Attribute */
-		out32r(PCIX0_PTM2LA, 0xef000000); /* Local Addr. Reg */
+		out32r(PCIL0_PTM2LA, 0xef000000); /* Local Addr. Reg */
 	}
 
 	if (is_monarch()) {

board/exbitgen/init.S

@@ -52,7 +52,7 @@
 #define    IIC_EXTSTS	(I2C_REGISTERS_BASE_ADDRESS+IICEXTSTS)
 #define    IIC_LSADR	(I2C_REGISTERS_BASE_ADDRESS+IICLSADR)
 #define    IIC_HSADR	(I2C_REGISTERS_BASE_ADDRESS+IICHSADR)
-#define    IIC_CLKDIV	(I2C_REGISTERS_BASE_ADDRESS+IICCLKDIV)
+#define    IIC_CLKDIV	(I2C_REGISTERS_BASE_ADDRESS+IIC0_CLKDIV)
 #define    IIC_INTRMSK	(I2C_REGISTERS_BASE_ADDRESS+IICINTRMSK)
 #define    IIC_XFRCNT	(I2C_REGISTERS_BASE_ADDRESS+IICXFRCNT)
 #define    IIC_XTCNTLSS	(I2C_REGISTERS_BASE_ADDRESS+IICXTCNTLSS)
@@ -537,7 +537,7 @@ read_spd:
 	WRITE_I2C(IICHSADR, 0x00)	/* clear hi slave address */
 	WRITE_I2C(IICSTS, 0x08)		/* update status register */
 	WRITE_I2C(IICEXTSTS, 0x8f)
-	WRITE_I2C(IICCLKDIV, 0x05)
+	WRITE_I2C(IIC0_CLKDIV, 0x05)
 	WRITE_I2C(IICINTRMSK, 0x00)	/* no interrupts */
 	WRITE_I2C(IICXFRCNT, 0x00)	/* clear transfer count */
 	WRITE_I2C(IICXTCNTLSS, 0xf0)	/* clear extended control & stat */

board/gdsys/gdppc440etx/gdppc440etx.c

@@ -239,22 +239,22 @@ void pci_target_init(struct pci_controller *hose)
 	 *   Use byte reversed out routines to handle endianess.
 	 * Make this region non-prefetchable.
 	 */
-	out32r(PCIX0_PMM0MA, 0x00000000); 	/* disabled b4 setting */
+	out32r(PCIL0_PMM0MA, 0x00000000); 	/* disabled b4 setting */
-	out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);
+	out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);
-	out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE);
+	out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE);
-	out32r(PCIX0_PMM0PCIHA, 0x00000000);
+	out32r(PCIL0_PMM0PCIHA, 0x00000000);
-	out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M, no prefetch, enable region */
+	out32r(PCIL0_PMM0MA, 0xE0000001); /* 512M, no prefetch, enable region */
-
+
-	out32r(PCIX0_PMM1MA, 0x00000000);	/* disabled b4 setting */
+	out32r(PCIL0_PMM1MA, 0x00000000);	/* disabled b4 setting */
-	out32r(PCIX0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2);
+	out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2);
-	out32r(PCIX0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2);
+	out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2);
-	out32r(PCIX0_PMM1PCIHA, 0x00000000);
+	out32r(PCIL0_PMM1PCIHA, 0x00000000);
-	out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M, no prefetch, enable region */
+	out32r(PCIL0_PMM1MA, 0xE0000001); /* 512M, no prefetch, enable region */
-
+
-	out32r(PCIX0_PTM1MS, 0x00000001);
+	out32r(PCIL0_PTM1MS, 0x00000001);
-	out32r(PCIX0_PTM1LA, 0);
+	out32r(PCIL0_PTM1LA, 0);
-	out32r(PCIX0_PTM2MS, 0);
+	out32r(PCIL0_PTM2MS, 0);
-	out32r(PCIX0_PTM2LA, 0);
+	out32r(PCIL0_PTM2LA, 0);
 
 	/*
 	 * Set up Configuration registers

board/gdsys/intip/intip.c

@@ -154,27 +154,27 @@ void pci_target_init(struct pci_controller *hose)
 	/*
 	 * Disable everything
 	 */
-	out_le32((void *)PCIX0_PIM0SA, 0); /* disable */
+	out_le32((void *)PCIL0_PIM0SA, 0); /* disable */
-	out_le32((void *)PCIX0_PIM1SA, 0); /* disable */
+	out_le32((void *)PCIL0_PIM1SA, 0); /* disable */
-	out_le32((void *)PCIX0_PIM2SA, 0); /* disable */
+	out_le32((void *)PCIL0_PIM2SA, 0); /* disable */
-	out_le32((void *)PCIX0_EROMBA, 0); /* disable expansion rom */
+	out_le32((void *)PCIL0_EROMBA, 0); /* disable expansion rom */
 
 	/*
 	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440
 	 * strapping options to not support sizes such as 128/256 MB.
 	 */
-	out_le32((void *)PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE);
+	out_le32((void *)PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE);
-	out_le32((void *)PCIX0_PIM0LAH, 0);
+	out_le32((void *)PCIL0_PIM0LAH, 0);
-	out_le32((void *)PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1);
+	out_le32((void *)PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1);
-	out_le32((void *)PCIX0_BAR0, 0);
+	out_le32((void *)PCIL0_BAR0, 0);
 
 	/*
 	 * Program the board's subsystem id/vendor id
 	 */
-	out_le16((void *)PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
+	out_le16((void *)PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
-	out_le16((void *)PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
+	out_le16((void *)PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
 
-	out_le16((void *)PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY);
+	out_le16((void *)PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY);
 }
 #endif	/* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 

board/korat/korat.c

@@ -679,29 +679,29 @@ void pci_target_init(struct pci_controller *hose)
 	 * Use byte reversed out routines to handle endianess.
 	 * Make this region non-prefetchable.
 	 */
-	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute */
+	out32r(PCIL0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute */
 						/* - disabled b4 setting */
-	out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
+	out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM0PCILA,
+	out32r(PCIL0_PMM0PCILA,
 	       CONFIG_SYS_PCI_MEMBASE);		/* PMM0 PCI Low Address */
-	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIL0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, */
+	out32r(PCIL0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, */
 						/* and enable region */
 
-	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute */
+	out32r(PCIL0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute */
 						/* - disabled b4 setting */
-	out32r(PCIX0_PMM1LA,
+	out32r(PCIL0_PMM1LA,
 	       CONFIG_SYS_PCI_MEMBASE + 0x20000000);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM1PCILA,
+	out32r(PCIL0_PMM1PCILA,
 	       CONFIG_SYS_PCI_MEMBASE + 0x20000000);	/* PMM0 PCI Low Address */
-	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIL0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, */
+	out32r(PCIL0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, */
 						/* and enable region */
 
-	out32r(PCIX0_PTM1MS, 0x00000001);	/* Memory Size/Attribute */
+	out32r(PCIL0_PTM1MS, 0x00000001);	/* Memory Size/Attribute */
-	out32r(PCIX0_PTM1LA, 0);		/* Local Addr. Reg */
+	out32r(PCIL0_PTM1LA, 0);		/* Local Addr. Reg */
-	out32r(PCIX0_PTM2MS, 0);		/* Memory Size/Attribute */
+	out32r(PCIL0_PTM2MS, 0);		/* Memory Size/Attribute */
-	out32r(PCIX0_PTM2LA, 0);		/* Local Addr. Reg */
+	out32r(PCIL0_PTM2LA, 0);		/* Local Addr. Reg */
 
 	/*
 	 * Set up Configuration registers

board/lwmon5/lwmon5.c

@@ -351,22 +351,22 @@ void pci_target_init(struct pci_controller *hose)
 	  |   Use byte reversed out routines to handle endianess.
 	  | Make this region non-prefetchable.
 	  +--------------------------------------------------------------------------*/
-	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
+	out32r(PCIL0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
-	out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
+	out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 PCI Low Address */
+	out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 PCI Low Address */
-	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIL0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
+	out32r(PCIL0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
-
+
-	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
+	out32r(PCIL0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
-	out32r(PCIX0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */
+	out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */
-	out32r(PCIX0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
+	out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
-	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIL0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
+	out32r(PCIL0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
-
+
-	out32r(PCIX0_PTM1MS, 0x00000001);	/* Memory Size/Attribute */
+	out32r(PCIL0_PTM1MS, 0x00000001);	/* Memory Size/Attribute */
-	out32r(PCIX0_PTM1LA, 0);	/* Local Addr. Reg */
+	out32r(PCIL0_PTM1LA, 0);	/* Local Addr. Reg */
-	out32r(PCIX0_PTM2MS, 0);	/* Memory Size/Attribute */
+	out32r(PCIL0_PTM2MS, 0);	/* Memory Size/Attribute */
-	out32r(PCIX0_PTM2LA, 0);	/* Local Addr. Reg */
+	out32r(PCIL0_PTM2LA, 0);	/* Local Addr. Reg */
 
 	/*--------------------------------------------------------------------------+
 	 * Set up Configuration registers

board/netstal/hcu5/hcu5.c

@@ -398,27 +398,27 @@ void pci_target_init(struct pci_controller *hose)
 	 * Make this region non-prefetchable.
 	 */
 	/* PMM0 Mask/Attribute - disabled b4 setting */
-	out32r(PCIX0_PMM0MA, 0x00000000);
+	out32r(PCIL0_PMM0MA, 0x00000000);
-	out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
+	out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
 	/* PMM0 PCI Low Address */
-	out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE);
+	out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE);
-	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIL0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
 	/* 512M + No prefetching, and enable region */
-	out32r(PCIX0_PMM0MA, 0xE0000001);
+	out32r(PCIL0_PMM0MA, 0xE0000001);
 
 	/* PMM0 Mask/Attribute - disabled b4 setting */
-	out32r(PCIX0_PMM1MA, 0x00000000);
+	out32r(PCIL0_PMM1MA, 0x00000000);
-	out32r(PCIX0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2);	/* PMM0 Local Address */
+	out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2);	/* PMM0 Local Address */
 	/* PMM0 PCI Low Address */
-	out32r(PCIX0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2);
+	out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2);
-	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIL0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
 	/* 512M + No prefetching, and enable region */
-	out32r(PCIX0_PMM1MA, 0xE0000001);
+	out32r(PCIL0_PMM1MA, 0xE0000001);
 
-	out32r(PCIX0_PTM1MS, 0x00000001);	/* Memory Size/Attribute */
+	out32r(PCIL0_PTM1MS, 0x00000001);	/* Memory Size/Attribute */
-	out32r(PCIX0_PTM1LA, 0);	/* Local Addr. Reg */
+	out32r(PCIL0_PTM1LA, 0);	/* Local Addr. Reg */
-	out32r(PCIX0_PTM2MS, 0);	/* Memory Size/Attribute */
+	out32r(PCIL0_PTM2MS, 0);	/* Memory Size/Attribute */
-	out32r(PCIX0_PTM2LA, 0);	/* Local Addr. Reg */
+	out32r(PCIL0_PTM2LA, 0);	/* Local Addr. Reg */
 
 	/*
 	 * Set up Configuration registers

board/pcs440ep/pcs440ep.c

@@ -626,22 +626,22 @@ void pci_target_init(struct pci_controller *hose)
 	  |   Use byte reversed out routines to handle endianess.
 	  | Make this region non-prefetchable.
 	  +--------------------------------------------------------------------------*/
-	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
+	out32r(PCIL0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
-	out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
+	out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 PCI Low Address */
+	out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 PCI Low Address */
-	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIL0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
+	out32r(PCIL0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
-
+
-	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
+	out32r(PCIL0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
-	out32r(PCIX0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2);	/* PMM0 Local Address */
+	out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
+	out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
-	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIL0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
+	out32r(PCIL0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
-
+
-	out32r(PCIX0_PTM1MS, 0x00000001);	/* Memory Size/Attribute */
+	out32r(PCIL0_PTM1MS, 0x00000001);	/* Memory Size/Attribute */
-	out32r(PCIX0_PTM1LA, 0);	/* Local Addr. Reg */
+	out32r(PCIL0_PTM1LA, 0);	/* Local Addr. Reg */
-	out32r(PCIX0_PTM2MS, 0);	/* Memory Size/Attribute */
+	out32r(PCIL0_PTM2MS, 0);	/* Memory Size/Attribute */
-	out32r(PCIX0_PTM2LA, 0);	/* Local Addr. Reg */
+	out32r(PCIL0_PTM2LA, 0);	/* Local Addr. Reg */
 
 	/*--------------------------------------------------------------------------+
 	 * Set up Configuration registers

board/prodrive/alpr/alpr.c

@@ -192,28 +192,28 @@ void pci_target_init(struct pci_controller * hose )
 	/*--------------------------------------------------------------------------+
 	 * Disable everything
 	 *--------------------------------------------------------------------------*/
-	out32r( PCIX0_PIM0SA, 0 ); /* disable */
+	out32r( PCIL0_PIM0SA, 0 ); /* disable */
-	out32r( PCIX0_PIM1SA, 0 ); /* disable */
+	out32r( PCIL0_PIM1SA, 0 ); /* disable */
-	out32r( PCIX0_PIM2SA, 0 ); /* disable */
+	out32r( PCIL0_PIM2SA, 0 ); /* disable */
-	out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
+	out32r( PCIL0_EROMBA, 0 ); /* disable expansion rom */
 
 	/*--------------------------------------------------------------------------+
 	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
 	 * options to not support sizes such as 128/256 MB.
 	 *--------------------------------------------------------------------------*/
-	out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
+	out32r( PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
-	out32r( PCIX0_PIM0LAH, 0 );
+	out32r( PCIL0_PIM0LAH, 0 );
-	out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
+	out32r( PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1 );
 
-	out32r( PCIX0_BAR0, 0 );
+	out32r( PCIL0_BAR0, 0 );
 
 	/*--------------------------------------------------------------------------+
 	 * Program the board's subsystem id/vendor id
 	 *--------------------------------------------------------------------------*/
-	out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+	out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
-	out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
+	out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
 
-	out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+	out16r( PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
 }
 #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 
@@ -270,21 +270,21 @@ void pci_master_init(struct pci_controller *hose)
 	  |   Use byte reversed out routines to handle endianess.
 	  | Make this region non-prefetchable.
 	  +--------------------------------------------------------------------------*/
-	out32r( PCIX0_POM0SA, 0 ); /* disable */
+	out32r( PCIL0_POM0SA, 0 ); /* disable */
-	out32r( PCIX0_POM1SA, 0 ); /* disable */
+	out32r( PCIL0_POM1SA, 0 ); /* disable */
-	out32r( PCIX0_POM2SA, 0 ); /* disable */
+	out32r( PCIL0_POM2SA, 0 ); /* disable */
-
+
-	out32r(PCIX0_POM0LAL, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
+	out32r(PCIL0_POM0LAL, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
-	out32r(PCIX0_POM0LAH, 0x00000003);	/* PMM0 Local Address */
+	out32r(PCIL0_POM0LAH, 0x00000003);	/* PMM0 Local Address */
-	out32r(PCIX0_POM0PCIAL, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 PCI Low Address */
+	out32r(PCIL0_POM0PCIAL, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 PCI Low Address */
-	out32r(PCIX0_POM0PCIAH, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIL0_POM0PCIAH, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_POM0SA, ~(0x10000000 - 1) | 1);	/* 256MB + enable region */
+	out32r(PCIL0_POM0SA, ~(0x10000000 - 1) | 1);	/* 256MB + enable region */
-
+
-	out32r(PCIX0_POM1LAL, CONFIG_SYS_PCI_MEMBASE2);	/* PMM0 Local Address */
+	out32r(PCIL0_POM1LAL, CONFIG_SYS_PCI_MEMBASE2);	/* PMM0 Local Address */
-	out32r(PCIX0_POM1LAH, 0x00000003);	/* PMM0 Local Address */
+	out32r(PCIL0_POM1LAH, 0x00000003);	/* PMM0 Local Address */
-	out32r(PCIX0_POM1PCIAL, CONFIG_SYS_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
+	out32r(PCIL0_POM1PCIAL, CONFIG_SYS_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
-	out32r(PCIX0_POM1PCIAH, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIL0_POM1PCIAH, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_POM1SA, ~(0x10000000 - 1) | 1);	/* 256MB + enable region */
+	out32r(PCIL0_POM1SA, ~(0x10000000 - 1) | 1);	/* 256MB + enable region */
 }
 #endif				/* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */
 

board/prodrive/p3p440/p3p440.c

@@ -209,28 +209,28 @@ void pci_target_init(struct pci_controller *hose)
 	/*--------------------------------------------------------------------------+
 	 * Disable everything
 	 *--------------------------------------------------------------------------*/
-	out32r(PCIX0_PIM0SA, 0);	/* disable */
+	out32r(PCIL0_PIM0SA, 0);	/* disable */
-	out32r(PCIX0_PIM1SA, 0);	/* disable */
+	out32r(PCIL0_PIM1SA, 0);	/* disable */
-	out32r(PCIX0_PIM2SA, 0);	/* disable */
+	out32r(PCIL0_PIM2SA, 0);	/* disable */
-	out32r(PCIX0_EROMBA, 0);	/* disable expansion rom */
+	out32r(PCIL0_EROMBA, 0);	/* disable expansion rom */
 
 	/*--------------------------------------------------------------------------+
 	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
 	 * options to not support sizes such as 128/256 MB.
 	 *--------------------------------------------------------------------------*/
-	out32r(PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE);
+	out32r(PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE);
-	out32r(PCIX0_PIM0LAH, 0);
+	out32r(PCIL0_PIM0LAH, 0);
-	out32r(PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1);
+	out32r(PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1);
 
-	out32r(PCIX0_BAR0, 0);
+	out32r(PCIL0_BAR0, 0);
 
 	/*--------------------------------------------------------------------------+
 	 * Program the board's subsystem id/vendor id
 	 *--------------------------------------------------------------------------*/
-	out16r(PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
+	out16r(PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
-	out16r(PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
+	out16r(PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
 
-	out16r(PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY);
+	out16r(PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY);
 }
 #endif				/* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 

board/sandburst/common/ppc440gx_i2c.h

@@ -44,7 +44,7 @@
 #define    IIC_EXTSTS1	(I2C_REGISTERS_BUS1_BASE_ADDRESS+IICEXTSTS)
 #define    IIC_LSADR1	(I2C_REGISTERS_BUS1_BASE_ADDRESS+IICLSADR)
 #define    IIC_HSADR1	(I2C_REGISTERS_BUS1_BASE_ADDRESS+IICHSADR)
-#define    IIC_CLKDIV1	(I2C_REGISTERS_BUS1_BASE_ADDRESS+IICCLKDIV)
+#define    IIC_CLKDIV1	(I2C_REGISTERS_BUS1_BASE_ADDRESS+IIC0_CLKDIV)
 #define    IIC_INTRMSK1	(I2C_REGISTERS_BUS1_BASE_ADDRESS+IICINTRMSK)
 #define    IIC_XFRCNT1	(I2C_REGISTERS_BUS1_BASE_ADDRESS+IICXFRCNT)
 #define    IIC_XTCNTLSS1	(I2C_REGISTERS_BUS1_BASE_ADDRESS+IICXTCNTLSS)

board/sandburst/common/sb_common.c

@@ -346,28 +346,28 @@ void pci_target_init(struct pci_controller * hose )
 	/*--------------------------------------------------------------------------+
 	 * Disable everything
 	 *--------------------------------------------------------------------------*/
-	out32r( PCIX0_PIM0SA, 0 ); /* disable */
+	out32r( PCIL0_PIM0SA, 0 ); /* disable */
-	out32r( PCIX0_PIM1SA, 0 ); /* disable */
+	out32r( PCIL0_PIM1SA, 0 ); /* disable */
-	out32r( PCIX0_PIM2SA, 0 ); /* disable */
+	out32r( PCIL0_PIM2SA, 0 ); /* disable */
-	out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
+	out32r( PCIL0_EROMBA, 0 ); /* disable expansion rom */
 
 	/*--------------------------------------------------------------------------+
 	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
 	 * options to not support sizes such as 128/256 MB.
 	 *--------------------------------------------------------------------------*/
-	out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
+	out32r( PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
-	out32r( PCIX0_PIM0LAH, 0 );
+	out32r( PCIL0_PIM0LAH, 0 );
-	out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
+	out32r( PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1 );
 
-	out32r( PCIX0_BAR0, 0 );
+	out32r( PCIL0_BAR0, 0 );
 
 	/*--------------------------------------------------------------------------+
 	 * Program the board's subsystem id/vendor id
 	 *--------------------------------------------------------------------------*/
-	out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+	out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
-	out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
+	out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
 
-	out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
+	out16r( PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY );
 }
 #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 

board/xes/xpedite1000/xpedite1000.c

@@ -156,7 +156,7 @@ int pci_pre_init(struct pci_controller * hose)
 		return 0;
 
 #if defined(CONFIG_SYS_PCI_FORCE_PCI_CONV)
-	/* Setup System Device Register PCIX0_XCR */
+	/* Setup System Device Register PCIL0_XCR */
 	mfsdr(SDR0_XCR, strap);
 	strap &= 0x0f000000;
 	mtsdr(SDR0_XCR, strap);
@@ -175,26 +175,26 @@ int pci_pre_init(struct pci_controller * hose)
 void pci_target_init(struct pci_controller * hose)
 {
 	/* Disable everything */
-	out32r(PCIX0_PIM0SA, 0);
+	out32r(PCIL0_PIM0SA, 0);
-	out32r(PCIX0_PIM1SA, 0);
+	out32r(PCIL0_PIM1SA, 0);
-	out32r(PCIX0_PIM2SA, 0);
+	out32r(PCIL0_PIM2SA, 0);
-	out32r(PCIX0_EROMBA, 0); /* disable expansion rom */
+	out32r(PCIL0_EROMBA, 0); /* disable expansion rom */
 
 	/*
 	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
 	 * options to not support sizes such as 128/256 MB.
 	 */
-	out32r(PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE);
+	out32r(PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE);
-	out32r(PCIX0_PIM0LAH, 0);
+	out32r(PCIL0_PIM0LAH, 0);
-	out32r(PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1);
+	out32r(PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1);
 
-	out32r(PCIX0_BAR0, 0);
+	out32r(PCIL0_BAR0, 0);
 
 	/* Program the board's subsystem id/vendor id */
-	out16r(PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
+	out16r(PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
-	out16r(PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
+	out16r(PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
 
-	out16r(PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY);
+	out16r(PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY);
 }
 #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 

cpu/ppc4xx/4xx_pci.c

@@ -518,7 +518,7 @@ int pci_440_init (struct pci_controller *hose)
 	/* PCI I/O space */
 	pci_set_region(hose->regions + reg_num++,
 		       0x00000000,
-		       PCIX0_IOBASE,
+		       PCIL0_IOBASE,
 		       0x10000,
 		       PCI_REGION_IO);
 
@@ -545,7 +545,7 @@ int pci_440_init (struct pci_controller *hose)
 
 	hose->region_count = reg_num;
 
-	pci_setup_indirect(hose, PCIX0_CFGADR, PCIX0_CFGDATA);
+	pci_setup_indirect(hose, PCIL0_CFGADR, PCIL0_CFGDATA);
 
 	/* Let board change/modify hose & do initial checks */
 	if (pci_pre_init (hose) == 0) {
@@ -562,18 +562,18 @@ int pci_440_init (struct pci_controller *hose)
 #if defined(CONFIG_SYS_PCI_TARGET_INIT)
 	pci_target_init(hose);                /* Let board setup pci target */
 #else
-	out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+	out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
-	out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_ID );
+	out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_ID );
-	out16r( PCIX0_CLS, 0x00060000 ); /* Bridge, host bridge */
+	out16r( PCIL0_CLS, 0x00060000 ); /* Bridge, host bridge */
 #endif
 
 #if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
     defined(CONFIG_460EX) || defined(CONFIG_460GT)
-	out32r( PCIX0_BRDGOPT1, 0x04000060 );               /* PLB Rq pri highest   */
+	out32r( PCIL0_BRDGOPT1, 0x04000060 );               /* PLB Rq pri highest   */
-	out32r( PCIX0_BRDGOPT2, in32(PCIX0_BRDGOPT2) | 0x83 ); /* Enable host config, clear Timeout, ensure int src1  */
+	out32r( PCIL0_BRDGOPT2, in32(PCIL0_BRDGOPT2) | 0x83 ); /* Enable host config, clear Timeout, ensure int src1  */
-#elif defined(PCIX0_BRDGOPT1)
+#elif defined(PCIL0_BRDGOPT1)
-	out32r( PCIX0_BRDGOPT1, 0x10000060 );               /* PLB Rq pri highest   */
+	out32r( PCIL0_BRDGOPT1, 0x10000060 );               /* PLB Rq pri highest   */
-	out32r( PCIX0_BRDGOPT2, in32(PCIX0_BRDGOPT2) | 1 ); /* Enable host config   */
+	out32r( PCIL0_BRDGOPT2, in32(PCIL0_BRDGOPT2) | 1 ); /* Enable host config   */
 #endif
 
 	/*--------------------------------------------------------------------------+
@@ -583,23 +583,23 @@ int pci_440_init (struct pci_controller *hose)
 #if defined(CONFIG_SYS_PCI_MASTER_INIT)
 	pci_master_init(hose);          /* Let board setup pci master */
 #else
-	out32r( PCIX0_POM0SA, 0 ); /* disable */
+	out32r( PCIL0_POM0SA, 0 ); /* disable */
-	out32r( PCIX0_POM1SA, 0 ); /* disable */
+	out32r( PCIL0_POM1SA, 0 ); /* disable */
-	out32r( PCIX0_POM2SA, 0 ); /* disable */
+	out32r( PCIL0_POM2SA, 0 ); /* disable */
 #if defined(CONFIG_440SPE)
-	out32r( PCIX0_POM0LAL, 0x10000000 );
+	out32r( PCIL0_POM0LAL, 0x10000000 );
-	out32r( PCIX0_POM0LAH, 0x0000000c );
+	out32r( PCIL0_POM0LAH, 0x0000000c );
 #elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
-	out32r( PCIX0_POM0LAL, 0x20000000 );
+	out32r( PCIL0_POM0LAL, 0x20000000 );
-	out32r( PCIX0_POM0LAH, 0x0000000c );
+	out32r( PCIL0_POM0LAH, 0x0000000c );
 #else
-	out32r( PCIX0_POM0LAL, 0x00000000 );
+	out32r( PCIL0_POM0LAL, 0x00000000 );
-	out32r( PCIX0_POM0LAH, 0x00000003 );
+	out32r( PCIL0_POM0LAH, 0x00000003 );
 #endif
-	out32r( PCIX0_POM0PCIAL, CONFIG_SYS_PCI_MEMBASE );
+	out32r( PCIL0_POM0PCIAL, CONFIG_SYS_PCI_MEMBASE );
-	out32r( PCIX0_POM0PCIAH, 0x00000000 );
+	out32r( PCIL0_POM0PCIAH, 0x00000000 );
-	out32r( PCIX0_POM0SA, 0xf0000001 ); /* 256MB, enabled */
+	out32r( PCIL0_POM0SA, 0xf0000001 ); /* 256MB, enabled */
-	out32r( PCIX0_STS, in32r( PCIX0_STS ) & ~0x0000fff8 );
+	out32r( PCIL0_STS, in32r( PCIL0_STS ) & ~0x0000fff8 );
 #endif
 
 	/*--------------------------------------------------------------------------+
@@ -614,7 +614,7 @@ int pci_440_init (struct pci_controller *hose)
 #endif
 #if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && \
     !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
-		out16r( PCIX0_CMD, in16r( PCIX0_CMD ) | PCI_COMMAND_MASTER);
+		out16r( PCIL0_CMD, in16r( PCIL0_CMD ) | PCI_COMMAND_MASTER);
 #endif
 		hose->last_busno = pci_hose_scan(hose);
 	}

cpu/ppc4xx/cpu_init.c

@@ -58,13 +58,13 @@ void reconfigure_pll(u32 new_cpu_freq)
 		target_perdv0 = 4;
 		target_spcid0 = 4;
 
-		mfcpr(CPR0_PRIMBD, reg);
+		mfcpr(CPR0_PRIMBD0, reg);
 		temp = (reg & PRBDV_MASK) >> 24;
 		prbdv0 = temp ? temp : 8;
 		if (prbdv0 != target_prbdv0) {
 			reg &= ~PRBDV_MASK;
 			reg |= ((target_prbdv0 == 8 ? 0 : target_prbdv0) << 24);
-			mtcpr(CPR0_PRIMBD, reg);
+			mtcpr(CPR0_PRIMBD0, reg);
 			reset_needed = 1;
 		}
 

cpu/ppc4xx/miiphy.c

@@ -195,7 +195,7 @@ unsigned int miiphy_getemac_offset(u8 addr)
 	unsigned long eoffset;
 
 	/* Need to find out which mdi port we're using */
-	zmii = in_be32((void *)ZMII_FER);
+	zmii = in_be32((void *)ZMII0_FER);
 
 	if (zmii & (ZMII_FER_MDI << ZMII_FER_V (0)))
 		/* using port 0 */
@@ -217,12 +217,12 @@ unsigned int miiphy_getemac_offset(u8 addr)
 		/* None of the mdi ports are enabled! */
 		/* enable port 0 */
 		zmii |= ZMII_FER_MDI << ZMII_FER_V (0);
-		out_be32((void *)ZMII_FER, zmii);
+		out_be32((void *)ZMII0_FER, zmii);
 		eoffset = 0;
 		/* need to soft reset port 0 */
-		zmii = in_be32((void *)EMAC_M0);
+		zmii = in_be32((void *)EMAC0_MR0);
-		zmii |= EMAC_M0_SRST;
+		zmii |= EMAC_MR0_SRST;
-		out_be32((void *)EMAC_M0, zmii);
+		out_be32((void *)EMAC0_MR0, zmii);
 	}
 
 	return (eoffset);
@@ -243,19 +243,19 @@ unsigned int miiphy_getemac_offset(u8 addr)
 	switch (addr) {
 #if defined(CONFIG_HAS_ETH1) && defined(CONFIG_GPCS_PHY1_ADDR)
 	case CONFIG_GPCS_PHY1_ADDR:
-		if (addr == EMAC_M1_IPPA_GET(in_be32((void *)EMAC_M1 + 0x100)))
+		if (addr == EMAC_MR1_IPPA_GET(in_be32((void *)EMAC0_MR1 + 0x100)))
 			eoffset = 0x100;
 		break;
 #endif
 #if defined(CONFIG_HAS_ETH2) && defined(CONFIG_GPCS_PHY2_ADDR)
 	case CONFIG_GPCS_PHY2_ADDR:
-		if (addr == EMAC_M1_IPPA_GET(in_be32((void *)EMAC_M1 + 0x300)))
+		if (addr == EMAC_MR1_IPPA_GET(in_be32((void *)EMAC0_MR1 + 0x300)))
 			eoffset = 0x300;
 		break;
 #endif
 #if defined(CONFIG_HAS_ETH3) && defined(CONFIG_GPCS_PHY3_ADDR)
 	case CONFIG_GPCS_PHY3_ADDR:
-		if (addr == EMAC_M1_IPPA_GET(in_be32((void *)EMAC_M1 + 0x400)))
+		if (addr == EMAC_MR1_IPPA_GET(in_be32((void *)EMAC0_MR1 + 0x400)))
 			eoffset = 0x400;
 		break;
 #endif
@@ -278,9 +278,9 @@ static int emac_miiphy_wait(u32 emac_reg)
 	/* wait for completion */
 	i = 0;
 	do {
-		sta_reg = in_be32((void *)EMAC_STACR + emac_reg);
+		sta_reg = in_be32((void *)EMAC0_STACR + emac_reg);
 		if (i++ > 5) {
-			debug("%s [%d]: Timeout! EMAC_STACR=0x%0x\n", __func__,
+			debug("%s [%d]: Timeout! EMAC0_STACR=0x%0x\n", __func__,
 			      __LINE__, sta_reg);
 			return -1;
 		}
@@ -324,7 +324,7 @@ static int emac_miiphy_command(u8 addr, u8 reg, int cmd, u16 value)
 	if (cmd == EMAC_STACR_WRITE)
 		memcpy(&sta_reg, &value, 2);	/* put in data */
 
-	out_be32((void *)EMAC_STACR + emac_reg, sta_reg);
+	out_be32((void *)EMAC0_STACR + emac_reg, sta_reg);
 	debug("%s [%d]: sta_reg=%08x\n", __func__, __LINE__, sta_reg);
 
 	/* wait for completion */
@@ -349,7 +349,7 @@ int emac4xx_miiphy_read (char *devname, unsigned char addr, unsigned char reg,
 	if (emac_miiphy_command(addr, reg, EMAC_STACR_READ, 0) != 0)
 		return -1;
 
-	sta_reg = in_be32((void *)EMAC_STACR + emac_reg);
+	sta_reg = in_be32((void *)EMAC0_STACR + emac_reg);
 	*value = sta_reg >> 16;
 
 	return 0;

cpu/ppc4xx/speed.c

@@ -334,7 +334,7 @@ void get_sys_info (sys_info_t *sysInfo)
 	sysInfo->pllFbkDiv = temp ? temp : 32;
 	lfdiv = reg & PLLD_LFBDV_MASK;
 
-	mfcpr(CPR0_OPBD, reg);
+	mfcpr(CPR0_OPBD0, reg);
 	temp = (reg & OPBDDV_MASK) >> 24;
 	sysInfo->pllOpbDiv = temp ? temp : 4;
 
@@ -342,7 +342,7 @@ void get_sys_info (sys_info_t *sysInfo)
 	temp = (reg & PERDV_MASK) >> 24;
 	sysInfo->pllExtBusDiv = temp ? temp : 8;
 
-	mfcpr(CPR0_PRIMBD, reg);
+	mfcpr(CPR0_PRIMBD0, reg);
 	temp = (reg & PRBDV_MASK) >> 24;
 	prbdv0 = temp ? temp : 8;
 
@@ -1050,7 +1050,7 @@ void get_sys_info (sys_info_t * sysInfo)
 	/*
 	 * Determine OPBDV0
 	 */
-	mfcpr(CPR0_OPBD, tmp);
+	mfcpr(CPR0_OPBD0, tmp);
 	tmp = (tmp >> 24) & 0x03;
 	sysInfo->pllOpbDiv = (tmp == 0) ? 4 : tmp;
 

drivers/net/4xx_enet.c

@@ -44,7 +44,7 @@
  *		RX descriptor address up to the next cache line boundary.
  *  16-Jan-00	Added support for booting with IP of 0x0		    MKW
  *  15-Mar-00	Updated enetInit() to enable broadcast addresses in the
- *		EMAC_RXM register.					    JWB
+ *		EMAC0_RXM register.					    JWB
  *  12-Mar-01	anne-sophie.harnois@nextream.fr
  *		 - Variables are compatible with those already defined in
  *		  include/net.h
@@ -58,7 +58,7 @@
  *  08-May-01	stefan.roese@esd-electronics.com
  *		- MAL error handling added (eth_init called again)
  *  13-Nov-01	stefan.roese@esd-electronics.com
- *		- Set IST bit in EMAC_M1 reg upon 100MBit or full duplex
+ *		- Set IST bit in EMAC0_MR1 reg upon 100MBit or full duplex
  *  04-Jan-02	stefan.roese@esd-electronics.com
  *		- Wait for PHY auto negotiation to complete added
  *  06-Feb-02	stefan.roese@esd-electronics.com
@@ -359,7 +359,7 @@ static void ppc_4xx_eth_halt (struct eth_device *dev)
 	EMAC_4XX_HW_PST hw_p = dev->priv;
 	u32 val = 10000;
 
-	out_be32((void *)EMAC_IER + hw_p->hw_addr, 0x00000000);	/* disable emac interrupts */
+	out_be32((void *)EMAC0_IER + hw_p->hw_addr, 0x00000000);	/* disable emac interrupts */
 
 	/* 1st reset MAL channel */
 	/* Note: writing a 0 to a channel has no effect */
@@ -382,7 +382,7 @@ static void ppc_4xx_eth_halt (struct eth_device *dev)
 	emac_loopback_enable(hw_p);
 
 	/* EMAC RESET */
-	out_be32((void *)EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST);
+	out_be32((void *)EMAC0_MR0 + hw_p->hw_addr, EMAC_MR0_SRST);
 
 	/* remove clocks for EMAC internal loopback  */
 	emac_loopback_disable(hw_p);
@@ -485,7 +485,7 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
 	/* Ensure we setup mdio for this devnum and ONLY this devnum */
 	zmiifer |= (ZMII_FER_MDI) << ZMII_FER_V(devnum);
 
-	out_be32((void *)ZMII_FER, zmiifer);
+	out_be32((void *)ZMII0_FER, zmiifer);
 	out_be32((void *)RGMII_FER, rmiifer);
 
 	return ((int)pfc1);
@@ -504,21 +504,21 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
 	switch (pfc1) {
 	case SDR0_PFC1_SELECT_CONFIG_2:
 		/* 1 x GMII port */
-		out_be32((void *)ZMII_FER, 0x00);
+		out_be32((void *)ZMII0_FER, 0x00);
 		out_be32((void *)RGMII_FER, 0x00000037);
 		bis->bi_phymode[0] = BI_PHYMODE_GMII;
 		bis->bi_phymode[1] = BI_PHYMODE_NONE;
 		break;
 	case SDR0_PFC1_SELECT_CONFIG_4:
 		/* 2 x RGMII ports */
-		out_be32((void *)ZMII_FER, 0x00);
+		out_be32((void *)ZMII0_FER, 0x00);
 		out_be32((void *)RGMII_FER, 0x00000055);
 		bis->bi_phymode[0] = BI_PHYMODE_RGMII;
 		bis->bi_phymode[1] = BI_PHYMODE_RGMII;
 		break;
 	case SDR0_PFC1_SELECT_CONFIG_6:
 		/* 2 x SMII ports */
-		out_be32((void *)ZMII_FER,
+		out_be32((void *)ZMII0_FER,
 			 ((ZMII_FER_SMII) << ZMII_FER_V(0)) |
 			 ((ZMII_FER_SMII) << ZMII_FER_V(1)));
 		out_be32((void *)RGMII_FER, 0x00000000);
@@ -527,7 +527,7 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
 		break;
 	case SDR0_PFC1_SELECT_CONFIG_1_2:
 		/* only 1 x MII supported */
-		out_be32((void *)ZMII_FER, (ZMII_FER_MII) << ZMII_FER_V(0));
+		out_be32((void *)ZMII0_FER, (ZMII_FER_MII) << ZMII_FER_V(0));
 		out_be32((void *)RGMII_FER, 0x00000000);
 		bis->bi_phymode[0] = BI_PHYMODE_MII;
 		bis->bi_phymode[1] = BI_PHYMODE_NONE;
@@ -537,9 +537,9 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
 	}
 
 	/* Ensure we setup mdio for this devnum and ONLY this devnum */
-	zmiifer = in_be32((void *)ZMII_FER);
+	zmiifer = in_be32((void *)ZMII0_FER);
 	zmiifer |= (ZMII_FER_MDI) << ZMII_FER_V(devnum);
-	out_be32((void *)ZMII_FER, zmiifer);
+	out_be32((void *)ZMII0_FER, zmiifer);
 
 	return ((int)0x0);
 }
@@ -953,18 +953,18 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 	/* NOTE: Therefore, disable all other EMACS, since we handle */
 	/* NOTE: only one emac at a time */
 	reg = 0;
-	out_be32((void *)ZMII_FER, 0);
+	out_be32((void *)ZMII0_FER, 0);
 	udelay (100);
 
 #if defined(CONFIG_440GP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
-	out_be32((void *)ZMII_FER, (ZMII_FER_RMII | ZMII_FER_MDI) << ZMII_FER_V (devnum));
+	out_be32((void *)ZMII0_FER, (ZMII_FER_RMII | ZMII_FER_MDI) << ZMII_FER_V (devnum));
 #elif defined(CONFIG_440GX) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
     defined(CONFIG_460EX) || defined(CONFIG_460GT)
 	ethgroup = ppc_4xx_eth_setup_bridge(devnum, bis);
 #endif
 
-	out_be32((void *)ZMII_SSR, ZMII_SSR_SP << ZMII_SSR_V(devnum));
+	out_be32((void *)ZMII0_SSR, ZMII0_SSR_SP << ZMII0_SSR_V(devnum));
 #endif /* defined(CONFIG_440) && !defined(CONFIG_440SP) */
 #if defined(CONFIG_405EX)
 	ethgroup = ppc_4xx_eth_setup_bridge(devnum, bis);
@@ -976,13 +976,13 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 	emac_loopback_enable(hw_p);
 
 	/* EMAC RESET */
-	out_be32((void *)EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST);
+	out_be32((void *)EMAC0_MR0 + hw_p->hw_addr, EMAC_MR0_SRST);
 
 	/* remove clocks for EMAC internal loopback  */
 	emac_loopback_disable(hw_p);
 
 	failsafe = 1000;
-	while ((in_be32((void *)EMAC_M0 + hw_p->hw_addr) & (EMAC_M0_SRST)) && failsafe) {
+	while ((in_be32((void *)EMAC0_MR0 + hw_p->hw_addr) & (EMAC_MR0_SRST)) && failsafe) {
 		udelay (1000);
 		failsafe--;
 	}
@@ -1000,15 +1000,15 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 	opbfreq = sysinfo.freqOPB / 1000000;
 	if (opbfreq <= 50);
 	else if (opbfreq <= 66)
-		mode_reg |= EMAC_M1_OBCI_66;
+		mode_reg |= EMAC_MR1_OBCI_66;
 	else if (opbfreq <= 83)
-		mode_reg |= EMAC_M1_OBCI_83;
+		mode_reg |= EMAC_MR1_OBCI_83;
 	else if (opbfreq <= 100)
-		mode_reg |= EMAC_M1_OBCI_100;
+		mode_reg |= EMAC_MR1_OBCI_100;
 	else
-		mode_reg |= EMAC_M1_OBCI_GT100;
+		mode_reg |= EMAC_MR1_OBCI_GT100;
 
-	out_be32((void *)EMAC_M1 + hw_p->hw_addr, mode_reg);
+	out_be32((void *)EMAC0_MR1 + hw_p->hw_addr, mode_reg);
 #endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */
 
 #if defined(CONFIG_GPCS_PHY_ADDR) || defined(CONFIG_GPCS_PHY1_ADDR) || \
@@ -1041,9 +1041,9 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 #endif
 		}
 
-		mode_reg = in_be32((void *)EMAC_M1 + hw_p->hw_addr);
+		mode_reg = in_be32((void *)EMAC0_MR1 + hw_p->hw_addr);
-		mode_reg |= EMAC_M1_MF_1000GPCS | EMAC_M1_IPPA_SET(reg);
+		mode_reg |= EMAC_MR1_MF_1000GPCS | EMAC_MR1_IPPA_SET(reg);
-		out_be32((void *)EMAC_M1 + hw_p->hw_addr, mode_reg);
+		out_be32((void *)EMAC0_MR1 + hw_p->hw_addr, mode_reg);
 
 		/* Configure GPCS interface to recommended setting for SGMII */
 		miiphy_reset(dev->name, reg);
@@ -1250,11 +1250,11 @@ get_speed:
 #endif
 
 	/* Set ZMII/RGMII speed according to the phy link speed */
-	reg = in_be32((void *)ZMII_SSR);
+	reg = in_be32((void *)ZMII0_SSR);
 	if ( (speed == 100) || (speed == 1000) )
-		out_be32((void *)ZMII_SSR, reg | (ZMII_SSR_SP << ZMII_SSR_V (devnum)));
+		out_be32((void *)ZMII0_SSR, reg | (ZMII0_SSR_SP << ZMII0_SSR_V (devnum)));
 	else
-		out_be32((void *)ZMII_SSR, reg & (~(ZMII_SSR_SP << ZMII_SSR_V (devnum))));
+		out_be32((void *)ZMII0_SSR, reg & (~(ZMII0_SSR_SP << ZMII0_SSR_V (devnum))));
 
 	if ((devnum == 2) || (devnum == 3)) {
 		if (speed == 1000)
@@ -1381,7 +1381,7 @@ get_speed:
 	reg = reg << 8;
 	reg |= dev->enetaddr[1];
 
-	out_be32((void *)EMAC_IAH + hw_p->hw_addr, reg);
+	out_be32((void *)EMAC0_IAH + hw_p->hw_addr, reg);
 
 	reg = 0x00000000;
 	reg |= dev->enetaddr[2];	/* set low address  */
@@ -1392,7 +1392,7 @@ get_speed:
 	reg = reg << 8;
 	reg |= dev->enetaddr[5];
 
-	out_be32((void *)EMAC_IAL + hw_p->hw_addr, reg);
+	out_be32((void *)EMAC0_IAL + hw_p->hw_addr, reg);
 
 	switch (devnum) {
 	case 1:
@@ -1480,9 +1480,9 @@ get_speed:
 	mtdcr (MAL0_RXCASR, (MAL_TXRX_CASR >> hw_p->devnum));
 
 	/* set transmit enable & receive enable */
-	out_be32((void *)EMAC_M0 + hw_p->hw_addr, EMAC_M0_TXE | EMAC_M0_RXE);
+	out_be32((void *)EMAC0_MR0 + hw_p->hw_addr, EMAC_MR0_TXE | EMAC_MR0_RXE);
 
-	mode_reg = in_be32((void *)EMAC_M1 + hw_p->hw_addr);
+	mode_reg = in_be32((void *)EMAC0_MR1 + hw_p->hw_addr);
 
 	/* set rx-/tx-fifo size */
 	mode_reg = (mode_reg & ~EMAC_MR1_FIFO_MASK) | EMAC_MR1_FIFO_SIZE;
@@ -1497,47 +1497,47 @@ get_speed:
 		pfc1 |= SDR0_PFC1_EM_1000;
 		mtsdr (SDR0_PFC1, pfc1);
 #endif
-		mode_reg = mode_reg | EMAC_M1_MF_1000MBPS | EMAC_M1_IST;
+		mode_reg = mode_reg | EMAC_MR1_MF_1000MBPS | EMAC_MR1_IST;
 	} else if (speed == _100BASET)
-		mode_reg = mode_reg | EMAC_M1_MF_100MBPS | EMAC_M1_IST;
+		mode_reg = mode_reg | EMAC_MR1_MF_100MBPS | EMAC_MR1_IST;
 	else
 		mode_reg = mode_reg & ~0x00C00000;	/* 10 MBPS */
 	if (duplex == FULL)
-		mode_reg = mode_reg | 0x80000000 | EMAC_M1_IST;
+		mode_reg = mode_reg | 0x80000000 | EMAC_MR1_IST;
 
-	out_be32((void *)EMAC_M1 + hw_p->hw_addr, mode_reg);
+	out_be32((void *)EMAC0_MR1 + hw_p->hw_addr, mode_reg);
 
 	/* Enable broadcast and indvidual address */
 	/* TBS: enabling runts as some misbehaved nics will send runts */
-	out_be32((void *)EMAC_RXM + hw_p->hw_addr, EMAC_RMR_BAE | EMAC_RMR_IAE);
+	out_be32((void *)EMAC0_RXM + hw_p->hw_addr, EMAC_RMR_BAE | EMAC_RMR_IAE);
 
 	/* we probably need to set the tx mode1 reg? maybe at tx time */
 
 	/* set transmit request threshold register */
-	out_be32((void *)EMAC_TRTR + hw_p->hw_addr, 0x18000000);	/* 256 byte threshold */
+	out_be32((void *)EMAC0_TRTR + hw_p->hw_addr, 0x18000000);	/* 256 byte threshold */
 
 	/* set receive	low/high water mark register */
 #if defined(CONFIG_440)
 	/* 440s has a 64 byte burst length */
-	out_be32((void *)EMAC_RX_HI_LO_WMARK + hw_p->hw_addr, 0x80009000);
+	out_be32((void *)EMAC0_RX_HI_LO_WMARK + hw_p->hw_addr, 0x80009000);
 #else
 	/* 405s have a 16 byte burst length */
-	out_be32((void *)EMAC_RX_HI_LO_WMARK + hw_p->hw_addr, 0x0f002000);
+	out_be32((void *)EMAC0_RX_HI_LO_WMARK + hw_p->hw_addr, 0x0f002000);
 #endif /* defined(CONFIG_440) */
-	out_be32((void *)EMAC_TXM1 + hw_p->hw_addr, 0xf8640000);
+	out_be32((void *)EMAC0_TMR1 + hw_p->hw_addr, 0xf8640000);
 
 	/* Set fifo limit entry in tx mode 0 */
-	out_be32((void *)EMAC_TXM0 + hw_p->hw_addr, 0x00000003);
+	out_be32((void *)EMAC0_TMR0 + hw_p->hw_addr, 0x00000003);
 	/* Frame gap set */
-	out_be32((void *)EMAC_I_FRAME_GAP_REG + hw_p->hw_addr, 0x00000008);
+	out_be32((void *)EMAC0_I_FRAME_GAP_REG + hw_p->hw_addr, 0x00000008);
 
 	/* Set EMAC IER */
 	hw_p->emac_ier = EMAC_ISR_PTLE | EMAC_ISR_BFCS | EMAC_ISR_ORE | EMAC_ISR_IRE;
 	if (speed == _100BASET)
 		hw_p->emac_ier = hw_p->emac_ier | EMAC_ISR_SYE;
 
-	out_be32((void *)EMAC_ISR + hw_p->hw_addr, 0xffffffff);	/* clear pending interrupts */
+	out_be32((void *)EMAC0_ISR + hw_p->hw_addr, 0xffffffff);	/* clear pending interrupts */
-	out_be32((void *)EMAC_IER + hw_p->hw_addr, hw_p->emac_ier);
+	out_be32((void *)EMAC0_IER + hw_p->hw_addr, hw_p->emac_ier);
 
 	if (hw_p->first_init == 0) {
 		/*
@@ -1596,8 +1596,8 @@ static int ppc_4xx_eth_send (struct eth_device *dev, volatile void *ptr,
 
 	sync();
 
-	out_be32((void *)EMAC_TXM0 + hw_p->hw_addr,
+	out_be32((void *)EMAC0_TMR0 + hw_p->hw_addr,
-		 in_be32((void *)EMAC_TXM0 + hw_p->hw_addr) | EMAC_TXM0_GNP0);
+		 in_be32((void *)EMAC0_TMR0 + hw_p->hw_addr) | EMAC_TMR0_GNP0);
 #ifdef INFO_4XX_ENET
 	hw_p->stats.pkts_tx++;
 #endif
@@ -1607,9 +1607,9 @@ static int ppc_4xx_eth_send (struct eth_device *dev, volatile void *ptr,
 	 *-----------------------------------------------------------------------*/
 	time_start = get_timer (0);
 	while (1) {
-		temp_txm0 = in_be32((void *)EMAC_TXM0 + hw_p->hw_addr);
+		temp_txm0 = in_be32((void *)EMAC0_TMR0 + hw_p->hw_addr);
 		/* loop until either TINT turns on or 3 seconds elapse */
-		if ((temp_txm0 & EMAC_TXM0_GNP0) != 0) {
+		if ((temp_txm0 & EMAC_TMR0_GNP0) != 0) {
 			/* transmit is done, so now check for errors
 			 * If there is an error, an interrupt should
 			 * happen when we return
@@ -1678,7 +1678,7 @@ int enetInt (struct eth_device *dev)
 
 		/* look for EMAC errors */
 		if ((uic_emac & UIC_ETHx) || (uic_emac_b & UIC_ETHxB)) {
-			emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr);
+			emac_isr = in_be32((void *)EMAC0_ISR + hw_p->hw_addr);
 			emac_err(dev, emac_isr);
 
 			/* clear EMAC error interrupt status bits */
@@ -1761,7 +1761,7 @@ static void emac_err (struct eth_device *dev, unsigned long isr)
 	EMAC_4XX_HW_PST hw_p = dev->priv;
 
 	printf ("EMAC%d error occured.... ISR = %lx\n", hw_p->devnum, isr);
-	out_be32((void *)EMAC_ISR + hw_p->hw_addr, isr);
+	out_be32((void *)EMAC0_ISR + hw_p->hw_addr, isr);
 }
 
 /*-----------------------------------------------------------------------------+

post/cpu/ppc4xx/ether.c

@@ -115,11 +115,11 @@ static void ether_post_init (int devnum, int hw_addr)
 	sync ();
 #endif
 	/* reset emac */
-	out_be32 ((void*)(EMAC_M0 + hw_addr), EMAC_M0_SRST);
+	out_be32 ((void*)(EMAC0_MR0 + hw_addr), EMAC_MR0_SRST);
 	sync ();
 
 	for (i = 0;; i++) {
-		if (!(in_be32 ((void*)(EMAC_M0 + hw_addr)) & EMAC_M0_SRST))
+		if (!(in_be32 ((void*)(EMAC0_MR0 + hw_addr)) & EMAC_MR0_SRST))
 			break;
 		if (i >= 1000) {
 			printf ("Timeout resetting EMAC\n");
@@ -134,15 +134,15 @@ static void ether_post_init (int devnum, int hw_addr)
 	mode_reg = 0x0;
 	if (sysinfo.freqOPB <= 50000000);
 	else if (sysinfo.freqOPB <= 66666667)
-		mode_reg |= EMAC_M1_OBCI_66;
+		mode_reg |= EMAC_MR1_OBCI_66;
 	else if (sysinfo.freqOPB <= 83333333)
-		mode_reg |= EMAC_M1_OBCI_83;
+		mode_reg |= EMAC_MR1_OBCI_83;
 	else if (sysinfo.freqOPB <= 100000000)
-		mode_reg |= EMAC_M1_OBCI_100;
+		mode_reg |= EMAC_MR1_OBCI_100;
 	else
-		mode_reg |= EMAC_M1_OBCI_GT100;
+		mode_reg |= EMAC_MR1_OBCI_GT100;
 
-	out_be32 ((void*)(EMAC_M1 + hw_addr), mode_reg);
+	out_be32 ((void*)(EMAC0_MR1 + hw_addr), mode_reg);
 
 #endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */
 
@@ -210,40 +210,40 @@ static void ether_post_init (int devnum, int hw_addr)
 
 	/* set internal loopback mode */
 #ifdef CONFIG_SYS_POST_ETHER_EXT_LOOPBACK
-	out_be32 ((void*)(EMAC_M1 + hw_addr), EMAC_M1_FDE | 0 |
+	out_be32 ((void*)(EMAC0_MR1 + hw_addr), EMAC_MR1_FDE | 0 |
-		  EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K |
+		  EMAC_MR1_RFS_4K | EMAC_MR1_TX_FIFO_2K |
-		  EMAC_M1_MF_100MBPS | EMAC_M1_IST |
+		  EMAC_MR1_MF_100MBPS | EMAC_MR1_IST |
-		  in_be32 ((void*)(EMAC_M1 + hw_addr)));
+		  in_be32 ((void*)(EMAC0_MR1 + hw_addr)));
 #else
-	out_be32 ((void*)(EMAC_M1 + hw_addr), EMAC_M1_FDE | EMAC_M1_ILE |
+	out_be32 ((void*)(EMAC0_MR1 + hw_addr), EMAC_MR1_FDE | EMAC_MR1_ILE |
-		  EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K |
+		  EMAC_MR1_RFS_4K | EMAC_MR1_TX_FIFO_2K |
-		  EMAC_M1_MF_100MBPS | EMAC_M1_IST |
+		  EMAC_MR1_MF_100MBPS | EMAC_MR1_IST |
-		  in_be32 ((void*)(EMAC_M1 + hw_addr)));
+		  in_be32 ((void*)(EMAC0_MR1 + hw_addr)));
 #endif
 
 	/* set transmit enable & receive enable */
-	out_be32 ((void*)(EMAC_M0 + hw_addr), EMAC_M0_TXE | EMAC_M0_RXE);
+	out_be32 ((void*)(EMAC0_MR0 + hw_addr), EMAC_MR0_TXE | EMAC_MR0_RXE);
 
 	/* enable broadcast address */
-	out_be32 ((void*)(EMAC_RXM + hw_addr), EMAC_RMR_BAE);
+	out_be32 ((void*)(EMAC0_RXM + hw_addr), EMAC_RMR_BAE);
 
 	/* set transmit request threshold register */
-	out_be32 ((void*)(EMAC_TRTR + hw_addr), 0x18000000);	/* 256 byte threshold */
+	out_be32 ((void*)(EMAC0_TRTR + hw_addr), 0x18000000);	/* 256 byte threshold */
 
 	/* set receive	low/high water mark register */
 #if defined(CONFIG_440)
 	/* 440s has a 64 byte burst length */
-	out_be32 ((void*)(EMAC_RX_HI_LO_WMARK + hw_addr), 0x80009000);
+	out_be32 ((void*)(EMAC0_RX_HI_LO_WMARK + hw_addr), 0x80009000);
 #else
 	/* 405s have a 16 byte burst length */
-	out_be32 ((void*)(EMAC_RX_HI_LO_WMARK + hw_addr), 0x0f002000);
+	out_be32 ((void*)(EMAC0_RX_HI_LO_WMARK + hw_addr), 0x0f002000);
 #endif /* defined(CONFIG_440) */
-	out_be32 ((void*)(EMAC_TXM1 + hw_addr), 0xf8640000);
+	out_be32 ((void*)(EMAC0_TMR1 + hw_addr), 0xf8640000);
 
 	/* Set fifo limit entry in tx mode 0 */
-	out_be32 ((void*)(EMAC_TXM0 + hw_addr), 0x00000003);
+	out_be32 ((void*)(EMAC0_TMR0 + hw_addr), 0x00000003);
 	/* Frame gap set */
-	out_be32 ((void*)(EMAC_I_FRAME_GAP_REG + hw_addr), 0x00000008);
+	out_be32 ((void*)(EMAC0_I_FRAME_GAP_REG + hw_addr), 0x00000008);
 	sync ();
 }
 
@@ -270,7 +270,7 @@ static void ether_post_halt (int devnum, int hw_addr)
 		udelay (1000);
 	}
 	/* emac reset */
-	out_be32 ((void*)(EMAC_M0 + hw_addr), EMAC_M0_SRST);
+	out_be32 ((void*)(EMAC0_MR0 + hw_addr), EMAC_MR0_SRST);
 
 #if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 	/* remove clocks for EMAC internal loopback  */
@@ -300,7 +300,7 @@ static void ether_post_send (int devnum, int hw_addr, void *packet, int length)
 	flush_dcache_range((u32)tx.data_ptr, (u32)tx.data_ptr + length);
 	sync ();
 
-	out_be32 ((void*)(EMAC_TXM0 + hw_addr), in_be32 ((void*)(EMAC_TXM0 + hw_addr)) | EMAC_TXM0_GNP0);
+	out_be32 ((void*)(EMAC0_TMR0 + hw_addr), in_be32 ((void*)(EMAC0_TMR0 + hw_addr)) | EMAC_TMR0_GNP0);
 	sync ();
 }