mmc: dw_mmc: remove the unnecessary arguments for dwmci_setup_cfg

Some arguments don't need to pass to dwmci_setup_cfg.
They are already included in dwmci_host structure.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

drivers/mmc/dw_mmc.c

@@ -488,10 +488,10 @@ static const struct mmc_ops dwmci_ops = {
 };
 #endif
 
-void dwmci_setup_cfg(struct mmc_config *cfg, const char *name, int buswidth,
+void dwmci_setup_cfg(struct mmc_config *cfg, struct dwmci_host *host,
-		     uint caps, u32 max_clk, u32 min_clk)
+		u32 max_clk, u32 min_clk)
 {
-	cfg->name = name;
+	cfg->name = host->name;
 #ifndef CONFIG_DM_MMC_OPS
 	cfg->ops = &dwmci_ops;
 #endif
@@ -500,9 +500,9 @@ void dwmci_setup_cfg(struct mmc_config *cfg, const char *name, int buswidth,
 
 	cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
 
-	cfg->host_caps = caps;
+	cfg->host_caps = host->caps;
 
-	if (buswidth == 8) {
+	if (host->buswidth == 8) {
 		cfg->host_caps |= MMC_MODE_8BIT;
 		cfg->host_caps &= ~MMC_MODE_4BIT;
 	} else {
@@ -522,8 +522,7 @@ int dwmci_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg)
 #else
 int add_dwmci(struct dwmci_host *host, u32 max_clk, u32 min_clk)
 {
-	dwmci_setup_cfg(&host->cfg, host->name, host->buswidth, host->caps,
+	dwmci_setup_cfg(&host->cfg, host, max_clk, min_clk);
-			max_clk, min_clk);
 
 	host->mmc = mmc_create(&host->cfg, host);
 	if (host->mmc == NULL)

drivers/mmc/exynos_dw_mmc.c

@@ -271,8 +271,7 @@ static int exynos_dwmmc_probe(struct udevice *dev)
 	if (err)
 		return err;
 
-	dwmci_setup_cfg(&plat->cfg, host->name, host->buswidth, host->caps,
+	dwmci_setup_cfg(&plat->cfg, host, DWMMC_MAX_FREQ, DWMMC_MIN_FREQ);
-			DWMMC_MAX_FREQ, DWMMC_MIN_FREQ);
 	host->mmc = &plat->mmc;
 	host->mmc->priv = &priv->host;
 	host->priv = dev;

drivers/mmc/rockchip_dw_mmc.c

@@ -129,8 +129,7 @@ static int rockchip_dwmmc_probe(struct udevice *dev)
 			return ret;
 	}
 #endif
-	dwmci_setup_cfg(&plat->cfg, dev->name, host->buswidth, host->caps,
+	dwmci_setup_cfg(&plat->cfg, host, priv->minmax[1], priv->minmax[0]);
-			priv->minmax[1], priv->minmax[0]);
 	host->mmc = &plat->mmc;
 	host->mmc->priv = &priv->host;
 	host->mmc->dev = dev;

drivers/mmc/socfpga_dw_mmc.c

@@ -111,8 +111,7 @@ static int socfpga_dwmmc_probe(struct udevice *dev)
 	struct dwmci_host *host = &priv->host;
 
 #ifdef CONFIG_BLK
-	dwmci_setup_cfg(&plat->cfg, dev->name, host->buswidth, host->caps,
+	dwmci_setup_cfg(&plat->cfg, host, host->bus_hz, 400000);
-			host->bus_hz, 400000);
 	host->mmc = &plat->mmc;
 #else
 	int ret;

include/dwmmc.h

@@ -253,14 +253,12 @@ static inline u8 dwmci_readb(struct dwmci_host *host, int reg)
  * See rockchip_dw_mmc.c for an example.
  *
  * @cfg:	Configuration structure to fill in (generally &plat->mmc)
- * @name:	Device name (normally dev->name)
+ * @host:	DWMMC host
- * @buswidth:	Bus width (in bits, such as 4 or 8)
- * @caps:	Host capabilities (MMC_MODE_...)
  * @max_clk:	Maximum supported clock speed in HZ (e.g. 150000000)
  * @min_clk:	Minimum supported clock speed in HZ (e.g. 400000)
  */
-void dwmci_setup_cfg(struct mmc_config *cfg, const char *name, int buswidth,
+void dwmci_setup_cfg(struct mmc_config *cfg, struct dwmci_host *host,
-		     uint caps, u32 max_clk, u32 min_clk);
+		u32 max_clk, u32 min_clk);
 
 /**
  * dwmci_bind() - Set up a new MMC block device