Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

ARM: kirkwood: Add device-tree for openrd

Browse Source 
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
lime2-spi
Chris Packham 7 years ago committed by Stefan Roese
parent 122b821189
commit e800ace560
7 changed files with 295 additions and 3 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 39
      arch/arm/dts/kirkwood-openrd-base.dts
  2. 73
      arch/arm/dts/kirkwood-openrd-client.dts
  3. 55
      arch/arm/dts/kirkwood-openrd-ultimate.dts
  4. 122
      arch/arm/dts/kirkwood-openrd.dtsi
  5. 3
      configs/openrd_base_defconfig
  6. 3
      configs/openrd_client_defconfig
  7. 3
      configs/openrd_ultimate_defconfig

39
arch/arm/dts/kirkwood-openrd-base.dts
Unescape View File

@ -0,0 +1,39 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Marvell OpenRD Base Board Description
*
* Andrew Lunn <andrew@lunn.ch>
*
* This file contains the definitions that are specific to OpenRD
* base variant of the Marvell Kirkwood Development Board.
*/
/dts-v1/;
#include "kirkwood-openrd.dtsi"
/ {
model = "OpenRD Base";
compatible = "marvell,openrd-base", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
ocp@f1000000 {
serial@12100 {
status = "okay";
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@8 {
reg = <8>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};

73
arch/arm/dts/kirkwood-openrd-client.dts
Unescape View File

@ -0,0 +1,73 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Marvell OpenRD Client Board Description
*
* Andrew Lunn <andrew@lunn.ch>
*
* This file contains the definitions that are specific to OpenRD
* client variant of the Marvell Kirkwood Development Board.
*/
/dts-v1/;
#include "kirkwood-openrd.dtsi"
/ {
model = "OpenRD Client";
compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
ocp@f1000000 {
audio-controller@a0000 {
status = "okay";
};
i2c@11000 {
status = "okay";
clock-frequency = <400000>;
cs42l51: cs42l51@4a {
compatible = "cirrus,cs42l51";
reg = <0x4a>;
#sound-dai-cells = <0>;
};
};
};
sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
simple-audio-card,mclk-fs = <256>;
simple-audio-card,cpu {
sound-dai = <&audio0 0>;
};
simple-audio-card,codec {
sound-dai = <&cs42l51>;
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@8 {
reg = <8>;
};
ethphy1: ethernet-phy@24 {
reg = <24>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
&eth1 {
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
};
};

55
arch/arm/dts/kirkwood-openrd-ultimate.dts
Unescape View File

@ -0,0 +1,55 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Marvell OpenRD Ultimate Board Description
*
* Andrew Lunn <andrew@lunn.ch>
*
* This file contains the definitions that are specific to OpenRD
* ultimate variant of the Marvell Kirkwood Development Board.
*/
/dts-v1/;
#include "kirkwood-openrd.dtsi"
/ {
model = "OpenRD Ultimate";
compatible = "marvell,openrd-ultimate", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
ocp@f1000000 {
i2c@11000 {
status = "okay";
clock-frequency = <400000>;
cs42l51: cs42l51@4a {
compatible = "cirrus,cs42l51";
reg = <0x4a>;
};
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
reg = <0>;
};
ethphy1: ethernet-phy@1 {
reg = <1>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
&eth1 {
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
};
};

122
arch/arm/dts/kirkwood-openrd.dtsi
Unescape View File

@ -0,0 +1,122 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Marvell OpenRD (Base|Client|Ultimate) Board Description
*
* Andrew Lunn <andrew@lunn.ch>
*
* This file contains the definitions that are common between the three
* variants of the Marvell Kirkwood Development Board.
*/
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8";
stdout-path = &uart0;
};
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pinctrl-0 = <&pmx_select28 &pmx_sdio_cd &pmx_select34>;
pinctrl-names = "default";
pmx_select28: pmx-select-rs232-rs485 {
marvell,pins = "mpp28";
marvell,function = "gpio";
};
pmx_sdio_cd: pmx-sdio-cd {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
pmx_select34: pmx-select-uart-sd {
marvell,pins = "mpp34";
marvell,function = "gpio";
};
};
serial@12000 {
status = "okay";
};
sata@80000 {
status = "okay";
nr-ports = <2>;
};
mvsdio@90000 {
status = "okay";
cd-gpios = <&gpio0 29 9>;
};
gpio@10100 {
p28 {
gpio-hog;
gpios = <28 GPIO_ACTIVE_HIGH>;
/*
* SelRS232or485 selects between RS-232 or RS-485
* mode for the second UART.
*
* Low: RS-232
* High: RS-485
*
* To use the second UART, you need to change also
* the SelUARTorSD.
*/
output-low;
line-name = "SelRS232or485";
};
};
gpio@10140 {
p2 {
gpio-hog;
gpios = <2 GPIO_ACTIVE_HIGH>;
/*
* SelUARTorSD selects between the second UART
* (serial@12100) and SD (mvsdio@90000).
*
* Low: UART
* High: SD
*
* When changing this line make sure the newly
* selected device node is enabled and the
* previously selected device node is disabled.
*/
output-high; /* Select SD by default */
line-name = "SelUARTorSD";
};
};
};
};
&nand {
status = "okay";
pinctrl-0 = <&pmx_nand>;
pinctrl-names = "default";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
};
partition@100000 {
label = "uImage";
reg = <0x0100000 0x400000>;
};
partition@600000 {
label = "root";
reg = <0x0600000 0x1FA00000>;
};
};
&pciec {
status = "okay";
};
&pcie0 {
status = "okay";
};

3
configs/openrd_base_defconfig
Unescape View File

@ -4,6 +4,7 @@ CONFIG_KIRKWOOD=y
CONFIG_SYS_TEXT_BASE=0x600000
CONFIG_TARGET_OPENRD=y
CONFIG_IDENT_STRING="\nOpenRD-Base"
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-openrd-base"
CONFIG_SYS_EXTRA_OPTIONS="BOARD_IS_OPENRD_BASE"
CONFIG_BOOTDELAY=3
CONFIG_LOGLEVEL=2
@ -24,6 +25,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=nand_mtd"
CONFIG_MTDPARTS_DEFAULT="mtdparts=nand_mtd:0x100000@0x000000(uboot),0x400000@0x100000(uImage),0x1fb00000@0x500000(rootfs)"
CONFIG_CMD_UBI=y
CONFIG_ISO_PARTITION=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_MVSATA_IDE=y
# CONFIG_MMC_HW_PARTITIONING is not set
@ -33,4 +35,3 @@ CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_OF_LIBFDT=y

3
configs/openrd_client_defconfig
Unescape View File

@ -4,6 +4,7 @@ CONFIG_KIRKWOOD=y
CONFIG_SYS_TEXT_BASE=0x600000
CONFIG_TARGET_OPENRD=y
CONFIG_IDENT_STRING="\nOpenRD-Client"
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-openrd-client"
CONFIG_SYS_EXTRA_OPTIONS="BOARD_IS_OPENRD_CLIENT"
CONFIG_BOOTDELAY=3
CONFIG_LOGLEVEL=2
@ -24,6 +25,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=nand_mtd"
CONFIG_MTDPARTS_DEFAULT="mtdparts=nand_mtd:0x100000@0x000000(uboot),0x400000@0x100000(uImage),0x1fb00000@0x500000(rootfs)"
CONFIG_CMD_UBI=y
CONFIG_ISO_PARTITION=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_MVSATA_IDE=y
# CONFIG_MMC_HW_PARTITIONING is not set
@ -33,4 +35,3 @@ CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_OF_LIBFDT=y

3
configs/openrd_ultimate_defconfig
Unescape View File

@ -4,6 +4,7 @@ CONFIG_KIRKWOOD=y
CONFIG_SYS_TEXT_BASE=0x600000
CONFIG_TARGET_OPENRD=y
CONFIG_IDENT_STRING="\nOpenRD-Ultimate"
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-openrd-ultimate"
CONFIG_SYS_EXTRA_OPTIONS="BOARD_IS_OPENRD_ULTIMATE"
CONFIG_BOOTDELAY=3
CONFIG_LOGLEVEL=2
@ -24,6 +25,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=nand_mtd"
CONFIG_MTDPARTS_DEFAULT="mtdparts=nand_mtd:0x100000@0x000000(uboot),0x400000@0x100000(uImage),0x1fb00000@0x500000(rootfs)"
CONFIG_CMD_UBI=y
CONFIG_ISO_PARTITION=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_MVSATA_IDE=y
# CONFIG_MMC_HW_PARTITIONING is not set
@ -33,4 +35,3 @@ CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_OF_LIBFDT=y

Write Preview
Loading…
Cancel
Save