Secure Proxy module manages hardware threads that are meant for communication between the processor entities. Adding support for this driver. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>lime2-spi
parent
600e46b08c
commit
f9aa41023b
@ -0,0 +1,40 @@ |
|||||||
|
Texas Instruments' K3 Secure Proxy |
||||||
|
=================================== |
||||||
|
|
||||||
|
The Texas Instruments' K3 Secure Proxy is a mailbox controller that has |
||||||
|
configurable threads maintained by System power processor. Each thread |
||||||
|
has different address space that can be used to send or receive messages. |
||||||
|
|
||||||
|
Secure Proxy Device Node: |
||||||
|
=========================== |
||||||
|
Required properties: |
||||||
|
-------------------- |
||||||
|
- compatible: Shall be: "ti,am654-secure-proxy" |
||||||
|
- reg-names data - Map the data region |
||||||
|
scfg - Map the secure configuration region |
||||||
|
rt - Map the Realtime region. |
||||||
|
- reg: Contains the register map per reg-names. |
||||||
|
- #mbox-cells Shall be 1. Contains the thread ID. |
||||||
|
|
||||||
|
Example: |
||||||
|
-------- |
||||||
|
|
||||||
|
secproxy: secproxy@285b0000 { |
||||||
|
compatible = "ti,am654-secure-proxy"; |
||||||
|
reg = <0x2a380000 0x80000>, |
||||||
|
<0x2a400000 0x80000>, |
||||||
|
<0x2a480000 0x80000>; |
||||||
|
reg-names = "rt", "scfg", "data"; |
||||||
|
#mbox-cells = <1>; |
||||||
|
}; |
||||||
|
|
||||||
|
client: |
||||||
|
|
||||||
|
systemcontroller: systemcontroller { |
||||||
|
[...] |
||||||
|
# RX thread ID is 4. |
||||||
|
# TX thread ID is 5. |
||||||
|
mboxes= <&secproxy 4>, |
||||||
|
<&secproxy 5>; |
||||||
|
[...] |
||||||
|
}; |
@ -0,0 +1,438 @@ |
|||||||
|
// SPDX-License-Identifier: GPL-2.0+
|
||||||
|
/*
|
||||||
|
* Texas Instruments' K3 Secure proxy Driver |
||||||
|
* |
||||||
|
* Copyright (C) 2017-2018 Texas Instruments Incorporated - http://www.ti.com/
|
||||||
|
* Lokesh Vutla <lokeshvutla@ti.com> |
||||||
|
*/ |
||||||
|
|
||||||
|
#include <common.h> |
||||||
|
#include <asm/io.h> |
||||||
|
#include <linux/types.h> |
||||||
|
#include <linux/bitops.h> |
||||||
|
#include <linux/soc/ti/k3-sec-proxy.h> |
||||||
|
#include <dm.h> |
||||||
|
#include <mailbox-uclass.h> |
||||||
|
|
||||||
|
DECLARE_GLOBAL_DATA_PTR; |
||||||
|
|
||||||
|
/* SEC PROXY RT THREAD STATUS */ |
||||||
|
#define RT_THREAD_STATUS 0x0 |
||||||
|
#define RT_THREAD_THRESHOLD 0x4 |
||||||
|
#define RT_THREAD_STATUS_ERROR_SHIFT 31 |
||||||
|
#define RT_THREAD_STATUS_ERROR_MASK BIT(31) |
||||||
|
#define RT_THREAD_STATUS_CUR_CNT_SHIFT 0 |
||||||
|
#define RT_THREAD_STATUS_CUR_CNT_MASK GENMASK(7, 0) |
||||||
|
|
||||||
|
/* SEC PROXY SCFG THREAD CTRL */ |
||||||
|
#define SCFG_THREAD_CTRL 0x1000 |
||||||
|
#define SCFG_THREAD_CTRL_DIR_SHIFT 31 |
||||||
|
#define SCFG_THREAD_CTRL_DIR_MASK BIT(31) |
||||||
|
|
||||||
|
#define SEC_PROXY_THREAD(base, x) ((base) + (0x1000 * (x))) |
||||||
|
#define THREAD_IS_RX 1 |
||||||
|
#define THREAD_IS_TX 0 |
||||||
|
|
||||||
|
/**
|
||||||
|
* struct k3_sec_proxy_desc - Description of secure proxy integration. |
||||||
|
* @thread_count: Number of Threads. |
||||||
|
* @max_msg_size: Message size in bytes. |
||||||
|
* @data_start_offset: Offset of the First data register of the thread |
||||||
|
* @data_end_offset: Offset of the Last data register of the thread |
||||||
|
* @valid_threads: List of Valid threads that the processor can access |
||||||
|
* @num_valid_threads: Number of valid threads. |
||||||
|
*/ |
||||||
|
struct k3_sec_proxy_desc { |
||||||
|
u16 thread_count; |
||||||
|
u16 max_msg_size; |
||||||
|
u16 data_start_offset; |
||||||
|
u16 data_end_offset; |
||||||
|
const u32 *valid_threads; |
||||||
|
u32 num_valid_threads; |
||||||
|
}; |
||||||
|
|
||||||
|
/**
|
||||||
|
* struct k3_sec_proxy_thread - Description of a secure proxy Thread |
||||||
|
* @id: Thread ID |
||||||
|
* @data: Thread Data path region for target |
||||||
|
* @scfg: Secure Config Region for Thread |
||||||
|
* @rt: RealTime Region for Thread |
||||||
|
* @rx_buf: Receive buffer data, max message size. |
||||||
|
*/ |
||||||
|
struct k3_sec_proxy_thread { |
||||||
|
u32 id; |
||||||
|
void __iomem *data; |
||||||
|
void __iomem *scfg; |
||||||
|
void __iomem *rt; |
||||||
|
u32 *rx_buf; |
||||||
|
}; |
||||||
|
|
||||||
|
/**
|
||||||
|
* struct k3_sec_proxy_mbox - Description of a Secure Proxy Instance |
||||||
|
* @chan: Mailbox Channel |
||||||
|
* @desc: Description of the SoC integration |
||||||
|
* @chans: Array for valid thread instances |
||||||
|
* @target_data: Secure Proxy region for Target Data |
||||||
|
* @scfg: Secure Proxy Region for Secure configuration. |
||||||
|
* @rt: Secure proxy Region for Real Time Region. |
||||||
|
*/ |
||||||
|
struct k3_sec_proxy_mbox { |
||||||
|
struct mbox_chan chan; |
||||||
|
struct k3_sec_proxy_desc *desc; |
||||||
|
struct k3_sec_proxy_thread *chans; |
||||||
|
phys_addr_t target_data; |
||||||
|
phys_addr_t scfg; |
||||||
|
phys_addr_t rt; |
||||||
|
}; |
||||||
|
|
||||||
|
static inline u32 sp_readl(void __iomem *addr, unsigned int offset) |
||||||
|
{ |
||||||
|
return readl(addr + offset); |
||||||
|
} |
||||||
|
|
||||||
|
static inline void sp_writel(void __iomem *addr, unsigned int offset, u32 data) |
||||||
|
{ |
||||||
|
writel(data, addr + offset); |
||||||
|
} |
||||||
|
|
||||||
|
/**
|
||||||
|
* k3_sec_proxy_of_xlate() - Translation of phandle to channel |
||||||
|
* @chan: Mailbox channel |
||||||
|
* @args: Phandle Pointer |
||||||
|
* |
||||||
|
* Translates the phandle args and fills up the Mailbox channel from client. |
||||||
|
* Return: 0 if all goes good, else return corresponding error message. |
||||||
|
*/ |
||||||
|
static int k3_sec_proxy_of_xlate(struct mbox_chan *chan, |
||||||
|
struct ofnode_phandle_args *args) |
||||||
|
{ |
||||||
|
struct k3_sec_proxy_mbox *spm = dev_get_priv(chan->dev); |
||||||
|
int ind, i; |
||||||
|
|
||||||
|
debug("%s(chan=%p)\n", __func__, chan); |
||||||
|
|
||||||
|
if (args->args_count != 1) { |
||||||
|
debug("Invaild args_count: %d\n", args->args_count); |
||||||
|
return -EINVAL; |
||||||
|
} |
||||||
|
ind = args->args[0]; |
||||||
|
|
||||||
|
for (i = 0; i < spm->desc->num_valid_threads; i++) |
||||||
|
if (spm->chans[i].id == ind) { |
||||||
|
chan->id = ind; |
||||||
|
chan->con_priv = &spm->chans[i]; |
||||||
|
return 0; |
||||||
|
} |
||||||
|
|
||||||
|
dev_err(chan->dev, "%s: Invalid Thread ID %d\n", __func__, ind); |
||||||
|
return -ENOENT; |
||||||
|
} |
||||||
|
|
||||||
|
/**
|
||||||
|
* k3_sec_proxy_request() - Request for mailbox channel |
||||||
|
* @chan: Channel Pointer |
||||||
|
*/ |
||||||
|
static int k3_sec_proxy_request(struct mbox_chan *chan) |
||||||
|
{ |
||||||
|
debug("%s(chan=%p)\n", __func__, chan); |
||||||
|
|
||||||
|
return 0; |
||||||
|
} |
||||||
|
|
||||||
|
/**
|
||||||
|
* k3_sec_proxy_free() - Free the mailbox channel |
||||||
|
* @chan: Channel Pointer |
||||||
|
*/ |
||||||
|
static int k3_sec_proxy_free(struct mbox_chan *chan) |
||||||
|
{ |
||||||
|
debug("%s(chan=%p)\n", __func__, chan); |
||||||
|
|
||||||
|
return 0; |
||||||
|
} |
||||||
|
|
||||||
|
/**
|
||||||
|
* k3_sec_proxy_verify_thread() - Verify thread status before |
||||||
|
* sending/receiving data. |
||||||
|
* @spt: pointer to secure proxy thread description |
||||||
|
* @dir: Direction of the thread |
||||||
|
* |
||||||
|
* Return: 0 if all goes good, else appropriate error message. |
||||||
|
*/ |
||||||
|
static inline int k3_sec_proxy_verify_thread(struct k3_sec_proxy_thread *spt, |
||||||
|
u8 dir) |
||||||
|
{ |
||||||
|
/* Check for any errors already available */ |
||||||
|
if (sp_readl(spt->rt, RT_THREAD_STATUS) & |
||||||
|
RT_THREAD_STATUS_ERROR_MASK) { |
||||||
|
printf("%s: Thread %d is corrupted, cannot send data.\n", |
||||||
|
__func__, spt->id); |
||||||
|
return -EINVAL; |
||||||
|
} |
||||||
|
|
||||||
|
/* Make sure thread is configured for right direction */ |
||||||
|
if ((sp_readl(spt->scfg, SCFG_THREAD_CTRL) |
||||||
|
& SCFG_THREAD_CTRL_DIR_MASK) >> SCFG_THREAD_CTRL_DIR_SHIFT != dir) { |
||||||
|
if (dir) |
||||||
|
printf("%s: Trying to receive data on tx Thread %d\n", |
||||||
|
__func__, spt->id); |
||||||
|
else |
||||||
|
printf("%s: Trying to send data on rx Thread %d\n", |
||||||
|
__func__, spt->id); |
||||||
|
return -EINVAL; |
||||||
|
} |
||||||
|
|
||||||
|
/* Check the message queue before sending/receiving data */ |
||||||
|
if (!(sp_readl(spt->rt, RT_THREAD_STATUS) & |
||||||
|
RT_THREAD_STATUS_CUR_CNT_MASK)) |
||||||
|
return -ENODATA; |
||||||
|
|
||||||
|
return 0; |
||||||
|
} |
||||||
|
|
||||||
|
/**
|
||||||
|
* k3_sec_proxy_send() - Send data via mailbox channel |
||||||
|
* @chan: Channel Pointer |
||||||
|
* @data: Pointer to k3_sec_proxy_msg |
||||||
|
* |
||||||
|
* Return: 0 if all goes good, else appropriate error message. |
||||||
|
*/ |
||||||
|
static int k3_sec_proxy_send(struct mbox_chan *chan, const void *data) |
||||||
|
{ |
||||||
|
const struct k3_sec_proxy_msg *msg = (struct k3_sec_proxy_msg *)data; |
||||||
|
struct k3_sec_proxy_mbox *spm = dev_get_priv(chan->dev); |
||||||
|
struct k3_sec_proxy_thread *spt = chan->con_priv; |
||||||
|
int num_words, trail_bytes, ret; |
||||||
|
void __iomem *data_reg; |
||||||
|
u32 *word_data; |
||||||
|
|
||||||
|
debug("%s(chan=%p, data=%p)\n", __func__, chan, data); |
||||||
|
|
||||||
|
ret = k3_sec_proxy_verify_thread(spt, THREAD_IS_TX); |
||||||
|
if (ret) { |
||||||
|
dev_err(dev, "%s: Thread%d verification failed. ret = %d\n", |
||||||
|
__func__, spt->id, ret); |
||||||
|
return ret; |
||||||
|
} |
||||||
|
|
||||||
|
/* Check the message size. */ |
||||||
|
if (msg->len > spm->desc->max_msg_size) { |
||||||
|
printf("%s: Thread %ld message length %zu > max msg size %d\n", |
||||||
|
__func__, chan->id, msg->len, spm->desc->max_msg_size); |
||||||
|
return -EINVAL; |
||||||
|
} |
||||||
|
|
||||||
|
/* Send the message */ |
||||||
|
data_reg = spt->data + spm->desc->data_start_offset; |
||||||
|
for (num_words = msg->len / sizeof(u32), word_data = (u32 *)msg->buf; |
||||||
|
num_words; |
||||||
|
num_words--, data_reg += sizeof(u32), word_data++) |
||||||
|
writel(*word_data, data_reg); |
||||||
|
|
||||||
|
trail_bytes = msg->len % sizeof(u32); |
||||||
|
if (trail_bytes) { |
||||||
|
u32 data_trail = *word_data; |
||||||
|
|
||||||
|
/* Ensure all unused data is 0 */ |
||||||
|
data_trail &= 0xFFFFFFFF >> (8 * (sizeof(u32) - trail_bytes)); |
||||||
|
writel(data_trail, data_reg); |
||||||
|
data_reg++; |
||||||
|
} |
||||||
|
|
||||||
|
/*
|
||||||
|
* 'data_reg' indicates next register to write. If we did not already |
||||||
|
* write on tx complete reg(last reg), we must do so for transmit |
||||||
|
*/ |
||||||
|
if (data_reg <= (spt->data + spm->desc->data_end_offset)) |
||||||
|
sp_writel(spt->data, spm->desc->data_end_offset, 0); |
||||||
|
|
||||||
|
debug("%s: Message successfully sent on thread %ld\n", |
||||||
|
__func__, chan->id); |
||||||
|
|
||||||
|
return 0; |
||||||
|
} |
||||||
|
|
||||||
|
/**
|
||||||
|
* k3_sec_proxy_recv() - Receive data via mailbox channel |
||||||
|
* @chan: Channel Pointer |
||||||
|
* @data: Pointer to k3_sec_proxy_msg |
||||||
|
* |
||||||
|
* Return: 0 if all goes good, else appropriate error message. |
||||||
|
*/ |
||||||
|
static int k3_sec_proxy_recv(struct mbox_chan *chan, void *data) |
||||||
|
{ |
||||||
|
struct k3_sec_proxy_mbox *spm = dev_get_priv(chan->dev); |
||||||
|
struct k3_sec_proxy_thread *spt = chan->con_priv; |
||||||
|
struct k3_sec_proxy_msg *msg = data; |
||||||
|
void __iomem *data_reg; |
||||||
|
int num_words, ret; |
||||||
|
u32 *word_data; |
||||||
|
|
||||||
|
debug("%s(chan=%p, data=%p)\n", __func__, chan, data); |
||||||
|
|
||||||
|
ret = k3_sec_proxy_verify_thread(spt, THREAD_IS_RX); |
||||||
|
if (ret) |
||||||
|
return ret; |
||||||
|
|
||||||
|
msg->len = spm->desc->max_msg_size; |
||||||
|
msg->buf = spt->rx_buf; |
||||||
|
data_reg = spt->data + spm->desc->data_start_offset; |
||||||
|
word_data = spt->rx_buf; |
||||||
|
for (num_words = spm->desc->max_msg_size / sizeof(u32); |
||||||
|
num_words; |
||||||
|
num_words--, data_reg += sizeof(u32), word_data++) |
||||||
|
*word_data = readl(data_reg); |
||||||
|
|
||||||
|
debug("%s: Message successfully received from thread %ld\n", |
||||||
|
__func__, chan->id); |
||||||
|
|
||||||
|
return 0; |
||||||
|
} |
||||||
|
|
||||||
|
struct mbox_ops k3_sec_proxy_mbox_ops = { |
||||||
|
.of_xlate = k3_sec_proxy_of_xlate, |
||||||
|
.request = k3_sec_proxy_request, |
||||||
|
.free = k3_sec_proxy_free, |
||||||
|
.send = k3_sec_proxy_send, |
||||||
|
.recv = k3_sec_proxy_recv, |
||||||
|
}; |
||||||
|
|
||||||
|
/**
|
||||||
|
* k3_sec_proxy_of_to_priv() - generate private data from device tree |
||||||
|
* @dev: corresponding k3 secure proxy device |
||||||
|
* @spm: pointer to driver specific private data |
||||||
|
* |
||||||
|
* Return: 0 if all went ok, else corresponding error message. |
||||||
|
*/ |
||||||
|
static int k3_sec_proxy_of_to_priv(struct udevice *dev, |
||||||
|
struct k3_sec_proxy_mbox *spm) |
||||||
|
{ |
||||||
|
const void *blob = gd->fdt_blob; |
||||||
|
|
||||||
|
if (!blob) { |
||||||
|
debug("'%s' no dt?\n", dev->name); |
||||||
|
return -ENODEV; |
||||||
|
} |
||||||
|
|
||||||
|
spm->target_data = devfdt_get_addr_name(dev, "target_data"); |
||||||
|
if (spm->target_data == FDT_ADDR_T_NONE) { |
||||||
|
dev_err(dev, "No reg property for target data base\n"); |
||||||
|
return -EINVAL; |
||||||
|
} |
||||||
|
|
||||||
|
spm->scfg = devfdt_get_addr_name(dev, "scfg"); |
||||||
|
if (spm->rt == FDT_ADDR_T_NONE) { |
||||||
|
dev_err(dev, "No reg property for Secure Cfg base\n"); |
||||||
|
return -EINVAL; |
||||||
|
} |
||||||
|
|
||||||
|
spm->rt = devfdt_get_addr_name(dev, "rt"); |
||||||
|
if (spm->rt == FDT_ADDR_T_NONE) { |
||||||
|
dev_err(dev, "No reg property for Real Time Cfg base\n"); |
||||||
|
return -EINVAL; |
||||||
|
} |
||||||
|
|
||||||
|
return 0; |
||||||
|
} |
||||||
|
|
||||||
|
/**
|
||||||
|
* k3_sec_proxy_thread_setup - Initialize the parameters for all valid threads |
||||||
|
* @spm: Mailbox instance for which threads needs to be initialized |
||||||
|
* |
||||||
|
* Return: 0 if all went ok, else corresponding error message |
||||||
|
*/ |
||||||
|
static int k3_sec_proxy_thread_setup(struct k3_sec_proxy_mbox *spm) |
||||||
|
{ |
||||||
|
struct k3_sec_proxy_thread *spt; |
||||||
|
int i, ind; |
||||||
|
|
||||||
|
for (i = 0; i < spm->desc->num_valid_threads; i++) { |
||||||
|
spt = &spm->chans[i]; |
||||||
|
ind = spm->desc->valid_threads[i]; |
||||||
|
spt->id = ind; |
||||||
|
spt->data = (void *)SEC_PROXY_THREAD(spm->target_data, ind); |
||||||
|
spt->scfg = (void *)SEC_PROXY_THREAD(spm->scfg, ind); |
||||||
|
spt->rt = (void *)SEC_PROXY_THREAD(spm->rt, ind); |
||||||
|
spt->rx_buf = calloc(1, spm->desc->max_msg_size); |
||||||
|
if (!spt->rx_buf) |
||||||
|
return -ENOMEM; |
||||||
|
} |
||||||
|
|
||||||
|
return 0; |
||||||
|
} |
||||||
|
|
||||||
|
/**
|
||||||
|
* k3_sec_proxy_probe() - Basic probe |
||||||
|
* @dev: corresponding mailbox device |
||||||
|
* |
||||||
|
* Return: 0 if all went ok, else corresponding error message |
||||||
|
*/ |
||||||
|
static int k3_sec_proxy_probe(struct udevice *dev) |
||||||
|
{ |
||||||
|
struct k3_sec_proxy_mbox *spm = dev_get_priv(dev); |
||||||
|
int ret; |
||||||
|
|
||||||
|
debug("%s(dev=%p)\n", __func__, dev); |
||||||
|
|
||||||
|
ret = k3_sec_proxy_of_to_priv(dev, spm); |
||||||
|
if (ret) |
||||||
|
return ret; |
||||||
|
|
||||||
|
spm->desc = (void *)dev_get_driver_data(dev); |
||||||
|
spm->chans = calloc(spm->desc->num_valid_threads, |
||||||
|
sizeof(struct k3_sec_proxy_thread)); |
||||||
|
if (!spm->chans) |
||||||
|
return -ENOMEM; |
||||||
|
|
||||||
|
ret = k3_sec_proxy_thread_setup(spm); |
||||||
|
if (ret) { |
||||||
|
debug("%s: secure proxy thread setup failed\n", __func__); |
||||||
|
return ret; |
||||||
|
} |
||||||
|
|
||||||
|
return 0; |
||||||
|
} |
||||||
|
|
||||||
|
static int k3_sec_proxy_remove(struct udevice *dev) |
||||||
|
{ |
||||||
|
struct k3_sec_proxy_mbox *spm = dev_get_priv(dev); |
||||||
|
|
||||||
|
debug("%s(dev=%p)\n", __func__, dev); |
||||||
|
|
||||||
|
free(spm->chans); |
||||||
|
|
||||||
|
return 0; |
||||||
|
} |
||||||
|
|
||||||
|
/*
|
||||||
|
* Thread ID #4: ROM request |
||||||
|
* Thread ID #5: ROM response, SYSFW notify |
||||||
|
* Thread ID #6: SYSFW request response |
||||||
|
* Thread ID #7: SYSFW request high priority |
||||||
|
* Thread ID #8: SYSFW request low priority |
||||||
|
* Thread ID #9: SYSFW notify response |
||||||
|
*/ |
||||||
|
static const u32 am6x_valid_threads[] = { 4, 5, 6, 7, 8, 9, 11, 13 }; |
||||||
|
|
||||||
|
static const struct k3_sec_proxy_desc am654_desc = { |
||||||
|
.thread_count = 90, |
||||||
|
.max_msg_size = 60, |
||||||
|
.data_start_offset = 0x4, |
||||||
|
.data_end_offset = 0x3C, |
||||||
|
.valid_threads = am6x_valid_threads, |
||||||
|
.num_valid_threads = ARRAY_SIZE(am6x_valid_threads), |
||||||
|
}; |
||||||
|
|
||||||
|
static const struct udevice_id k3_sec_proxy_ids[] = { |
||||||
|
{ .compatible = "ti,am654-secure-proxy", .data = (ulong)&am654_desc}, |
||||||
|
{ } |
||||||
|
}; |
||||||
|
|
||||||
|
U_BOOT_DRIVER(k3_sec_proxy) = { |
||||||
|
.name = "k3-secure-proxy", |
||||||
|
.id = UCLASS_MAILBOX, |
||||||
|
.of_match = k3_sec_proxy_ids, |
||||||
|
.probe = k3_sec_proxy_probe, |
||||||
|
.remove = k3_sec_proxy_remove, |
||||||
|
.priv_auto_alloc_size = sizeof(struct k3_sec_proxy_mbox), |
||||||
|
.ops = &k3_sec_proxy_mbox_ops, |
||||||
|
}; |
@ -0,0 +1,25 @@ |
|||||||
|
/* SPDX-License-Identifier: GPL-2.0+ */ |
||||||
|
/*
|
||||||
|
* Texas Instruments' K3 Secure proxy |
||||||
|
* |
||||||
|
* Copyright (C) 2017-2018 Texas Instruments Incorporated - http://www.ti.com/
|
||||||
|
* Lokesh Vutla <lokeshvutla@ti.com> |
||||||
|
* |
||||||
|
*/ |
||||||
|
|
||||||
|
#ifndef K3_SEC_PROXY_H |
||||||
|
#define K3_SEC_PROXY_H |
||||||
|
|
||||||
|
/**
|
||||||
|
* struct k3_sec_proxy_msg - Secure proxy message structure |
||||||
|
* @len: Length of data in the Buffer |
||||||
|
* @buf: Buffer pointer |
||||||
|
* |
||||||
|
* This is the structure for data used in mbox_send() and mbox_recv(). |
||||||
|
*/ |
||||||
|
struct k3_sec_proxy_msg { |
||||||
|
size_t len; |
||||||
|
u32 *buf; |
||||||
|
}; |
||||||
|
|
||||||
|
#endif /* K3_SEC_PROXY_H */ |
Loading…
Reference in new issue