f5577aae4a
Improve DIMM detection for AMCC Yucca 440SPe board
...
Improved the memory DIMM detection for the Yucca 440SPe board for
the case where a memory DIMM is falsely detected as present.
This issue is seen on some AMCC Yucca 440SPe validation boards if
only one 512MB memory DIMM is installed, i.e. DIMM slot 0 is
populated and DIMM slot 1 is empty. In this case, U-Boot does
not correctly detect that there is only one DIMM memory module
installed and will falsely detect two DIMM memory modules are
present and therefore U-Boot will not calculate the correct amount
of total memory and u-boot will not booting up.
Patch by Adam Graham, 24 Aug 2006
19 years ago
16850919ff
Code cleanup
19 years ago
3b0ff842bf
Fix typo in MCC200/PRS200 configuration
19 years ago
113f64e09a
Update for MCC200 / PRS200 boards:
...
- auto-adjust console device for Linux.
- fix typos.
19 years ago
15f29f06ed
Merge with /home/tur/proj/fo300/u-boot
19 years ago
ed1cf8456f
Updates for MCC200 / PRS200 boards:
...
- support for configurations with SDRAM or DDR memory,
- support for highboot and lowboot
- adjusting environment definitions
19 years ago
ddde6b7cf8
Add a fix for a buggy USB device on the FO300 board.
19 years ago
5196a7a03b
Minor cleanup
19 years ago
6d3bc9b8cf
Add support for WTK FO300 board (TQM5200 based).
19 years ago
c5185470fe
Merge with /home/raj/git/u-boot
19 years ago
4bfb632077
Merge with git+ssh://fifi/home/wd/git/u-boot/master
19 years ago
6fe16a8769
Fix TQM834x hang.
19 years ago
0a0f3a46fb
Cleanup debug code for yucca board.
19 years ago
6183bb9e5b
MCC200: restrict addressable flash space to 32 MB
19 years ago
463764c893
Add debug console on COM12 for MCC200 board
19 years ago
94568b600a
Update for SC520 board.
...
Patch by David Updegraff, 02 Dec 2005
19 years ago
2f6fa46d41
Fixed common.h spelling error.
...
Patch by Cory Tusar, 30 Nov 2005
19 years ago
ddd5d9daf0
Fix typo.
...
Patch by Andreas Engel, 28 Nov 2005
19 years ago
80f0c0f58f
Fix fatload command on FAT32 formatted partitions.
...
Patch by Joachim Jaeger, 18 Nov 2005
19 years ago
d689e3462c
Fix drivers/dm9000.c when configured in 32 bit mode.
...
Patch by Eric Benard, 17 Nov 2005
19 years ago
c72d9c5285
Merge with /home/sr/git/u-boot/denx
19 years ago
7213859d11
Merge with /home/raj/git/u-boot
19 years ago
d8519dc718
Fix preboot message on TQM85xx after switching to hush parser.
19 years ago
015c200b1f
Adapt TQM85xx ramdisk address to Linux kernel memory map
19 years ago
36b904a7fd
Fix PCI-Express on PPC440SPe rev. A.
19 years ago
d10afb3916
Merge with /home/raj/git/u-boot
19 years ago
692519b1ed
Add support for PCI-Express on PPC440SPe (Yucca board).
19 years ago
a3d9181e00
Fix compiler warning for TRAB board.
...
Patch by Martin Krause, 07 Aug 2006
19 years ago
6587f7e1e9
Merge with /home/tur/proj/usb_sticks/u-boot
19 years ago
d8f961bbda
Fix control-c handing in CONFIG_CMDLINE_EDITING
...
Properly pass break code back from readline.
Patch by Roger Blofeld, 31 Jul 2006
19 years ago
4f92ed5fc0
Add commandline history support to all AMCC eval boards
...
Patch by Stefan Roese, 07 Aug 2006
19 years ago
9ede3cc511
Add Macronix MXLV320T flash support for AMCC Bamboo
...
Patch by Stefan Roese, 07 Aug 2006
19 years ago
e335496a32
Change "mii info" to not print an error upon missing PHY at address
...
Patch by Stefan Roese, 07 Aug 2006
19 years ago
e51aae3829
Prevent USB commands from working when USB is stopped.
19 years ago
7455af41d1
Add rudimentary handling of alternate settings of USB interfaces - to fix
...
problems with some USB storage devices. Some code readability improvements.
19 years ago
a2c95a7224
PPC440 DDR setup: Set SDRAM0_CFG0[PMU]=0 for best performance
...
AMCC suggested to set the PMU bit to 0 for best performace on
the PPC440 DDR controller.
Please see doc/README.440-DDR-performance for details.
Patch by Stefan Roese, 28 Jul 2006
19 years ago
fc6c4a67ae
Merge with /home/sr/git/u-boot/denx
19 years ago
193dd95834
AMCC bamboo (440EP) U-Boot image reduced to 384kbyte
...
Please see doc/README.bamboo for details.
Patch by Stefan Roese, 27 Jul 2006
19 years ago
3ca9122fec
Fix CONFIG_CMDLINE_EDITING implementation
...
Patch by Stefan Roese, 27 Jul 2006
19 years ago
4c4aca8166
Fix preboot message on TQM5200 after switching to hush parser.
19 years ago
4819fad905
MCC200: set default configuration to low_boot DDR,
...
and support for configurable options high_boot and/or SDRAM.
19 years ago
fd27996dac
Add support for 256 MB SDRAM on CPU87
...
Patch by Josef Wagner, 25 Nov 2005
19 years ago
135ae0062f
Add configuration for cam5200 board (based on TQM5200S).
19 years ago
048f6b436b
Code cleanup
19 years ago
fc1840e881
Code cleanup.
19 years ago
966083e95f
More code cleanup
19 years ago
144f7795ee
Disabled kvme080 board in MAKEALL because of build problems.
19 years ago
b9365a26a1
Code cleanup
19 years ago
87a5c73d66
Update NetStar board
...
Patch by Ladislav Michl, 03 Nov 2005
19 years ago
029b6dc77c
Make code better readable.
...
Patch by Ladislav Michl, 14 Sep 2005
19 years ago
Stefan Roese
Wolfgang Denk
Wolfgang Denk
Bartlomiej Sieka
Marian Balakowicz
Rafal Jaworowski
Wolfgang Denk